Resources
A coal-fired power plant flue gas stream flows at a total volumetric rate of at and , containing of sulfur dioxide (). To abate acid rain emissions, the gas is passed through a wet limestone-gypsum scrubber where reacts with calcium carbonate slurry according to: . If the chemical scrubbing process operates at a steady-state capture efficiency of , calculate: (a) the mass of pure gypsum (, ) produced per day in metric tons (), and (b) the secondary mass of greenhouse gas () released directly into the atmosphere per day in metric tons as a result of the stoichiometric neutralization.
Answer and steps
Final answer
(a) ; (b)
Steps
Calculate the Daily Flue Gas Flow and Total Moles
First, find the total daily volumetric flow rate of the flue gas:
Using the ideal gas equation , determine the molar volume of an ideal gas at and ():
The total moles of flue gas passing through the system per day are:
Determine the Moles of Captured Daily
The concentration of is , which corresponds to a mole fraction of :
Given a capture efficiency of (), the daily moles of captured and reacted are:
(a) Mass of Gypsum Produced
According to the balanced reaction:
The stoichiometric ratio between and gypsum () is :
Using the molar mass of gypsum ():
Convert grams to metric tons ():
(b) Mass of Released
The stoichiometric ratio between reacted and released is also :
Using the molar mass of ():
Convert grams to metric tons:
(Note: Although wet limestone scrubbing successfully mitigates to prevent acid rain, a green chemistry trade-off is the direct stoichiometric emission of gas during carbonate neutralization.)
Typical errors
01 The student ignores the 96.0% capture efficiency and assumes 100% conversion of all inlet SO₂.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You equated the moles of gypsum produced directly to the total entering , overlooking the capture efficiency. Only the captured () participates in the neutralization reaction.
- Step 4Correct
Your stoichiometry and unit conversion for are methodologically sound, but your result is affected by carrying forward the uncorrected value of unreacted from step 3.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly scaled the hourly volumetric flow rate to a 24-hour daily total.
You applied the ideal gas equation accurately with matching SI units (, ).
You correctly interpreted as a mole fraction of .
You recognized the stoichiometric molar ratios linking reacted to both gypsum and .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn chemical engineering unit operations, inlet species are rarely converted with efficiency. You set , overlooking the process capture efficiency .
REASONING PATH
Your ACEpath teacher’s suggested approach- Connecting Inlet Flow to Reacted Quantity
, where is the fractional capture or conversion efficiency.
Check whether the chemical scrubbing system specifies an abatement efficiency or fractional yield before entering the reaction stoichiometry.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the capture efficiency to find the daily reacted moles of : .
Compute the mass of gypsum produced using a mole ratio: .
Compute the mass of released using a mole ratio: .
(a) ; (b)
02 The student omits the factor of 24 hours per day and calculates the production on an hourly basis instead of per day.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You recognized the stoichiometric ratio and converted grams to metric tons correctly, but you computed the output per hour while labeling it per day, missing the factor of .
- Step 4Correct
You correctly used the molar ratio for release, but similarly omitted the conversion from hours to days ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the ideal gas law to determine the molar flow rate of flue gas.
You accurately interpreted the volumetric concentration in parts per million and applied the capture efficiency.
You correctly identified the stoichiometric ratios for gypsum formation and carbon dioxide release.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou solved for the mass produced per hour ( and ) but wrote the unit as metric tons per day without multiplying by .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWorking with mixed or implicit time bases without tracking explicit dimensional units through each line of algebra.
REASONING PATH
Your ACEpath teacher’s suggested approach- Dimensional Unit Cancellation
When rates are involved, always retain the time unit in the denominator (e.g., vs. ).
Multiply by whenever transforming an hourly flow rate into a daily mass production.
CORRECTED PATH
ACEpath Teacher's DemonstrationMultiply the hourly reacted moles by : .
Calculate daily mass of gypsum: .
Calculate daily mass of : .
(a) ; (b)
03 The student confuses parts per million by volume (ppm_v) with parts per million by mass and incorrectly treats the volume fraction as mass in grams per cubic meter.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You assigned the unit to the dimensionless volume fraction . Because represents parts per million by volume (or mole fraction for an ideal gas), multiplying by yields the volume of gas in , not its mass in grams. You must use the ideal gas law () or molar volume to find the moles of .
- Step 3Correct
Your application of the capture efficiency, the stoichiometric ratio, the molar mass of gypsum, and the metric ton conversion was logically sound, but the numerical result is affected by the earlier mole calculation.
- Step 4Correct
Your molar ratio for , molar mass multiplication, and ton conversion were correct, but the final value inherits the error from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly scaled the hourly gas flow to a full daily volume.
You correctly applied the capture efficiency factor to the reacted moles.
You used the exact stoichiometric ratios for gypsum formation and release.
You accurately converted grams to metric tons using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated parts per million by volume () as a mass concentration with units of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing volumetric/molar gas concentration units () with mass concentration ( or ). In gas mixtures, represents a mole fraction (), so it must be converted to moles via total gas moles or ideal gas volume, rather than directly multiplied to obtain mass.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define ppm_v for Gases
For an ideal gas mixture, .
Always treat as a dimensionless mole fraction: . Never attach mass units like or directly to the volume.
- Convert Gas Volume to Moles
Molar amount is calculated through the ideal gas law: . At and , ().
First find the total moles of flue gas using , then multiply by the mole fraction to find moles of pollutant.
CORRECTED PATH
ACEpath Teacher's DemonstrationDetermine the daily volume of pure entering: .
Convert this volume to moles using : .
Account for capture: .
Calculate mass of gypsum (): .
Calculate mass of (): .
(a) ; (b)
Lock it in
In an industrial scrubbing or abatement process, how is the quantity of reacted pollutant calculated from the inlet pollutant flow?
, where is the fractional capture or removal efficiency.
Similar question
A chemical plant flue stream supplies of to a limestone scrubber operating at capture efficiency according to . Calculate the mass of gypsum () produced per day in metric tons.
Answer
. Steps: . Mass .
An incinerator flue gas delivers at and () containing of . The gas enters a wet caustic scrubber where with a removal efficiency of . Calculate the mass of pure () produced daily in kilograms.
Answer
. Steps: Total gas moles . Inlet . Reacted . Mass of .
A coal plant emits of into a limestone scrubber (). The plant operator observes that of gypsum () is recovered. Determine the actual steady-state capture efficiency of the scrubber and the accompanying mass of () released daily in metric tons.
Answer
Capture efficiency , . Steps: Gypsum moles . Capture efficiency . By stoichiometry, moles , so mass .