Resources
An equimolar mixture containing of methane (, ) and of sulfur dioxide (, ) is held in a sealed vessel at . (a) Coupling Dalton's Law of Partial Pressures with KMT, calculate the partial pressure of each gas and the total pressure in the vessel. (b) Calculate the ratio of the average molecular speeds (). (c) If a tiny pinhole is opened, allowing effusion into an evacuated chamber for a very brief duration, calculate the initial mole fraction of in the effused gas mixture.
Answer and steps
Final answer
(a) , , ; (b) Ratio of speeds ; (c) Effused mole fraction .
Steps
Part (a): Partial Pressures and Total Pressure
According to the Kinetic Molecular Theory (KMT), gas particles in an ideal mixture are point masses that exert no intermolecular forces on one another. As a consequence, each gas behaves independently and occupies the entire container volume.
By the ideal gas law, the partial pressure exerted by gas is:
Using the ideal gas constant , the volume , and temperature :
For methane ():
Because the mixture is equimolar ():
By Dalton's Law of Partial Pressures, the total pressure is the sum of the partial pressures:
Part (b): Ratio of Root-Mean-Square Speeds
From the Kinetic Molecular Theory, the average kinetic energy of a gas depends solely on temperature:
At a constant temperature , the root-mean-square speed is inversely proportional to the square root of the molar mass:
Substituting the molar masses ( and ):
Methane molecules move, on average, twice as fast as sulfur dioxide molecules at the same temperature.
Part (c): Initial Mole Fraction in the Effused Gas
Graham's law of effusion states that the rate of effusion of a gas through a tiny pinhole is directly proportional to its collision frequency with the barrier, which depends on both its concentration (or partial pressure) and its average molecular speed:
Because the gases have equal initial partial pressures (), the relative rate of effusion depends solely on the inverse square root of their molar masses:
For a brief initial duration, the number of moles effusing into the vacuum chamber is directly proportional to their effusion rates:
The mole fraction of in the effused mixture is therefore:
Common Pitfall: Do not confuse the mole fraction inside the source container () with the effused mole fraction. Because lighter particles escape more rapidly, the effused gas is enriched in the lighter component ().
Typical errors
01 The student forgets to take the square root of the molar mass ratio when calculating the ratio of rms speeds, obtaining 4.00 instead of 2.00.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You omitted the square root when relating root-mean-square molecular speeds to molar mass. Because , the ratio of speeds is inversely proportional to the square root of the molar mass ratio.
- Step 3Correct
Your reasoning for finding the mole fraction from the relative effusion rates was completely sound, but your result was affected by the incorrect speed ratio of carried over from part (b).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the ideal gas law and Dalton's law of partial pressures to solve part (a).
You correctly recognized that the ratio of speeds depends inversely on molar mass.
You correctly set up the effused mole fraction using the ratio of effusion rates in part (c).
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated root-mean-square molecular velocity as inversely proportional to molar mass () rather than inversely proportional to the square root of molar mass ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Deriving Root-Mean-Square Speed from KMT
Average translational kinetic energy per mole is , giving .
Always apply a square root when comparing molecular velocities or effusion rates of two gases at the same temperature: .
CORRECTED PATH
ACEpath Teacher's DemonstrationTake the square root of the molar mass ratio: .
Use the corrected effusion rate ratio to find the effused mole fraction: .
(a) , , ; (b) ; (c)
02 The student sets the speed ratio directly proportional to the square root of molar mass rather than inversely proportional, concluding the heavier gas is faster.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because root-mean-square speed is given by , molecular speed is inversely proportional to the square root of molar mass. Lighter gas molecules move faster than heavier molecules at the same temperature, so the ratio should have in the numerator and in the denominator.
- Step 3Correct
Your reasoning for finding the mole fraction from the relative effusion rate was mathematically sound, but your result was affected by substituting the inverted speed ratio from part (b).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the ideal gas law to find the partial pressures of both components.
You correctly applied Dalton's Law of Partial Pressures to determine the total pressure.
You understood the proportional relationship between effusion rate and effused mole fraction.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated molecular speed as directly proportional to the square root of molar mass rather than inversely proportional, leading to the conclusion that heavier molecules move faster than lighter ones at the same temperature.
REASONING PATH
Your ACEpath teacher’s suggested approach- KMT and Molecular Speed
At a given temperature, all gases have the same average kinetic energy (). Consequently, .
Always place the molar mass of the second gas in the numerator and the first gas in the denominator when writing speed or effusion ratios: .
- Physical Reality Check
Lighter particles move faster and escape through a pinhole more quickly, enriching the effused mixture in the lighter gas.
Before finalizing your answer, verify that the lighter gas has a speed ratio greater than and an effused mole fraction greater than its initial mole fraction.
CORRECTED PATH
ACEpath Teacher's DemonstrationInvert the molar mass fraction in part (b): .
Use the corrected speed ratio as the effusion rate ratio: .
Calculate the effused mole fraction using the corrected rates: .
(a) , , (or ); (b) ; (c)
03 The student confuses the effusion rate ratio with the mole fraction directly, forgetting to normalize by the sum of effused moles.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You equated the mole fraction directly to the relative molar ratio . A mole fraction is defined as the moles of a component divided by the total moles, which means it must always satisfy .
WHAT YOU DID WELL
Compliments from Your TeacherYou applied the ideal gas law and Dalton's Law of Partial Pressures accurately in part (a).
You used Graham's law and the inverse square root molar mass relationship correctly in part (b).
You accurately found the initial relative effusion rate ratio of in part (c).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou stopped at the ratio of effused components rather than converting that ratio into a fraction of the total effused gas.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing a relative part-to-part ratio () with a part-to-whole mole fraction (), leading to an unnormalized value greater than .
REASONING PATH
Your ACEpath teacher’s suggested approach- Sanity Check for Mole Fractions
Every mole fraction must satisfy , and all mole fractions in a mixture must sum to .
Whenever you calculate a mole fraction, verify that it falls strictly between and before finalizing your answer.
- Converting Ratio to Mole Fraction
If the molar ratio of two components is , then .
Normalize by dividing the relative rate or moles of the target component by the sum of all components in the mixture.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the relative effused amount of as part, which means accounts for parts.
Calculate the total relative effused parts: .
Compute the effused mole fraction: .
Lock it in
How does the root-mean-square speed () of an ideal gas depend on its molar mass () at a constant temperature?
, meaning speed is inversely proportional to the square root of the molar mass ().
Similar question
Calculate the ratio of root-mean-square speeds () for hydrogen gas () and oxygen gas () at .
Answer
Ratio . Key steps: .
An equimolar mixture of neon (, ) and krypton (, ) effuses into a vacuum through a small pinhole. Find the mole fraction of neon in the initial effused mixture.
Answer
. Key steps: Effusion rate ratio . Mole fraction .
A gas mixture contains of helium (, ) and of argon (, ) in a container. Calculate the mole fraction of helium in the gas that initially effuses through a pinhole.
Answer
. Key steps: Effusion rate depends on partial pressure (or initial moles) and molar mass: . Then .