Resources

Consider the single-replacement reaction between solid nickel metal, Ni(s)\text{Ni}(s), and an aqueous solution of iron(II) nitrate, Fe(NO3)2(aq)\text{Fe}(\text{NO}_3)_2(aq), at 298 K298\,\text{K}. The standard reduction potentials are E∘=−0.257 VE^{\circ} = -0.257\,\text{V} for Ni2+(aq)+2e−→Ni(s)\text{Ni}^{2+}(aq) + 2e^- \rightarrow \text{Ni}(s) and E∘=−0.447 VE^{\circ} = -0.447\,\text{V} for Fe2+(aq)+2e−→Fe(s)\text{Fe}^{2+}(aq) + 2e^- \rightarrow \text{Fe}(s). Determine the standard cell potential Ecell∘E^{\circ}_{\text{cell}} for the prospective forward reaction, indicate whether a spontaneous chemical reaction occurs under standard conditions, and predict the final products or write 'No Reaction'.

Answer and steps

Final answer

Ecell∘=−0.190 VE^{\circ}_{\text{cell}} = -0.190\,\text{V}; No reaction occurs under standard conditions (No Reaction)

Steps

01

Identify the prospective half-reactions

To determine whether a single-replacement reaction occurs spontaneously, we analyze the prospective half-reactions and calculate the standard cell potential (Ecell∘E^\circ_{\text{cell}}).

In the proposed reaction, solid nickel would displace iron(II) ions from solution: Ni(s)+Fe(NOX3)X2(aq)→Ni(NOX3)X2(aq)+Fe(s)\ce{Ni}(s) + \ce{Fe(NO3)2}(aq) \rightarrow \ce{Ni(NO3)2}(aq) + \ce{Fe}(s)

Omitting spectator nitrate ions (NOX3X−\ce{NO3^-}), the prospective net ionic reaction is: Ni(s)+FeX2+(aq)→NiX2+(aq)+Fe(s)\ce{Ni}(s) + \ce{Fe^{2+}}(aq) \rightarrow \ce{Ni^{2+}}(aq) + \ce{Fe}(s)

This reaction breaks down into two half-reactions:

  • Oxidation (anode): Ni(s)→NiX2+(aq)+2e−\ce{Ni}(s) \rightarrow \ce{Ni^{2+}}(aq) + 2e^-
  • Reduction (cathode): FeX2+(aq)+2e−→Fe(s)\ce{Fe^{2+}}(aq) + 2e^- \rightarrow \ce{Fe}(s)
02

Calculate the standard cell potential (Ecell∘E^\circ_{\text{cell}})

Using the standard reduction potentials provided:

  • E∘(FeX2+/Fe)=−0.447 VE^\circ(\ce{Fe^{2+}/Fe}) = -0.447\text{ V} (reduction)
  • E∘(NiX2+/Ni)=−0.257 VE^\circ(\ce{Ni^{2+}/Ni}) = -0.257\text{ V} (oxidation partner)

The standard cell potential is calculated as: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} Ecell∘=E∘(FeX2+/Fe)−E∘(NiX2+/Ni)E^\circ_{\text{cell}} = E^\circ(\ce{Fe^{2+}/Fe}) - E^\circ(\ce{Ni^{2+}/Ni}) Ecell∘=−0.447 V−(−0.257 V)=−0.190 VE^\circ_{\text{cell}} = -0.447\text{ V} - (-0.257\text{ V}) = -0.190\text{ V}

03

Assess spontaneity and determine the outcome

A reaction is thermodynamically spontaneous under standard conditions if and only if Ecell∘>0E^\circ_{\text{cell}} > 0 (which corresponds to ΔG∘=−nFEcell∘<0\Delta G^\circ = -nFE^\circ_{\text{cell}} < 0).

Because Ecell∘=−0.190 V<0E^\circ_{\text{cell}} = -0.190\text{ V} < 0:

  • The prospective forward reaction is non-spontaneous.
  • Solid nickel cannot reduce FeX2+\ce{Fe^{2+}} ions (iron is more chemically active than nickel, so nickel cannot displace iron).

Therefore, under standard conditions: Ecell∘=−0.190 VE^\circ_{\text{cell}} = -0.190\text{ V} No reaction occurs under standard conditions (No Reaction).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates cell potential as larger reduction potential minus smaller reduction potential assuming any cell must have a positive potential, resulting in an incorrect positive E°_cell and concluding the reaction is spontaneous.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ecell∘=E∘(NiX2+/Ni)−E∘(FeX2+/Fe)  ⟹  Ecell∘=−0.257 V−(−0.447 V)=+0.190 VE^{\circ}_{\text{cell}} = E^{\circ}(\ce{Ni^{2+}/Ni}) - E^{\circ}(\ce{Fe^{2+}/Fe}) \implies E^{\circ}_{\text{cell}} = -0.257\,\text{V} - (-0.447\,\text{V}) = +0.190\,\text{V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=E∘(FeX2+/Fe)−E∘(NiX2+/Ni)=−0.447 V−(−0.257 V)=−0.190 VE^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} = E^{\circ}(\ce{Fe^{2+}/Fe}) - E^{\circ}(\ce{Ni^{2+}/Ni}) = -0.447\,\text{V} - (-0.257\,\text{V}) = -0.190\,\text{V}

    In the prospective reaction, Ni(s)\ce{Ni}(s) loses electrons (oxidation at the anode) while FeX2+(aq)\ce{Fe^{2+}}(aq) gains electrons (reduction at the cathode). The equation Ecell∘=Ecathode∘−Eanode∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} therefore requires subtracting the nickel couple from the iron couple, which yields −0.190 V-0.190\,\text{V}.

  2. Step 2

    Since Ecell∘>0, the reaction is spontaneous.\text{Since } E^{\circ}_{\text{cell}} > 0\text{, the reaction is spontaneous.}

    Correct

    Since Ecell∘=−0.190 V<0, the forward reaction is non-spontaneous.\text{Since } E^{\circ}_{\text{cell}} = -0.190\,\text{V} < 0\text{, the forward reaction is non-spontaneous.}

    Your reasoning that a positive cell potential indicates spontaneity is correct, but because the actual standard cell potential is −0.190 V-0.190\,\text{V}, the reaction is non-spontaneous under standard conditions.

  3. Step 3

    Ni(NOX3)X2(aq)+Fe(s)\ce{Ni(NO3)2}(aq) + \ce{Fe}(s)

    Correct

    No Reaction\text{No Reaction}

    Because the forward single-replacement reaction is non-spontaneous, nickel cannot displace iron(II) ions from solution, resulting in no chemical reaction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the relationship between positive cell potential and thermodynamic spontaneity.

You performed the arithmetic subtraction with negative signs accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed cathode and anode roles in cell potential calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assigned the reduction potentials so that the resulting cell potential would be positive rather than matching each electrode potential to its actual role in the specified forward chemical equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match electrodes to the written reaction
  • For any prospective reaction, reduction occurs at the cathode and oxidation occurs at the anode: Ecell∘=Ereduction∘−Eoxidation∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{reduction}} - E^{\circ}_{\text{oxidation}}.

  • Always write down the half-reactions for the proposed forward direction first to identify which species is reduced before plugging values into Ecathode∘−Eanode∘E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}}.

Allow cell potential to be negative
  • A calculated negative Ecell∘E^{\circ}_{\text{cell}} is physically valid and simply indicates that the reaction is non-spontaneous in the written forward direction.

  • Do not swap cathode and anode to force Ecell∘>0E^{\circ}_{\text{cell}} > 0 when testing whether a specified reaction will proceed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the proposed net ionic reaction: Ni(s)+FeX2+(aq)→NiX2+(aq)+Fe(s)\ce{Ni}(s) + \ce{Fe^{2+}}(aq) \rightarrow \ce{Ni^{2+}}(aq) + \ce{Fe}(s).

  2. Identify the cathode (reduction) half-reaction: FeX2+(aq)+2e−→Fe(s)\ce{Fe^{2+}}(aq) + 2e^- \rightarrow \ce{Fe}(s) with E∘=−0.447 VE^{\circ} = -0.447\,\text{V}.

  3. Identify the anode (oxidation) half-reaction: Ni(s)→NiX2+(aq)+2e−\ce{Ni}(s) \rightarrow \ce{Ni^{2+}}(aq) + 2e^- with E∘=−0.257 VE^{\circ} = -0.257\,\text{V}.

  4. Calculate Ecell∘=Ecathode∘−Eanode∘=−0.447 V−(−0.257 V)=−0.190 VE^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} = -0.447\,\text{V} - (-0.257\,\text{V}) = -0.190\,\text{V}.

  5. Since Ecell∘<0E^{\circ}_{\text{cell}} < 0, the forward reaction is non-spontaneous.

Final answer

Ecell∘=−0.190 VE^{\circ}_{\text{cell}} = -0.190\,\text{V}; No reaction occurs under standard conditions (No Reaction)

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the oxidation and reduction half-reactions before choosing numerical values for Ecathode∘E^{\circ}_{\text{cathode}} and Eanode∘E^{\circ}_{\text{anode}}.

  • Remember that a prospective reaction can have a negative standard cell potential, which directly predicts 'No Reaction'.

OverviewACEpath Teacher's Diagnosis

02 The student adds both standard reduction potentials directly instead of reversing the sign of the oxidation half-reaction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ecell∘=E∘(Ni)+E∘(Fe)  ⟹  Ecell∘=−0.257 V+(−0.447 V)=−0.704 VE^{\circ}_{\text{cell}} = E^{\circ}(\text{Ni}) + E^{\circ}(\text{Fe}) \implies E^{\circ}_{\text{cell}} = -0.257\,\text{V} + (-0.447\,\text{V}) = -0.704\,\text{V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=−0.447 V−(−0.257 V)=−0.190 VE^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} = -0.447\,\text{V} - (-0.257\,\text{V}) = -0.190\,\text{V}

    In the prospective forward reaction, solid Ni\text{Ni} would be oxidized at the anode (“Ni(s)→Ni2+(aq)+2e−2˘01d“\text{Ni}(s) \rightarrow \text{Ni}^{2+}(aq) + 2e^-\u201d) while Fe2+\text{Fe}^{2+} is reduced at the cathode. Standard reduction potentials are both tabulated as reductions, so you must use Ecell∘=Ecathode∘−Eanode∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} (or reverse the sign of the oxidation half-reaction: Eox∘=+0.257 VE^{\circ}_{\text{ox}} = +0.257\,\text{V}). Adding both reduction potentials directly gives −0.704 V-0.704\,\text{V} instead of −0.190 V-0.190\,\text{V}.

  2. Step 2

    Since Ecell∘<0, no spontaneous reaction occurs.  ⟹  No Reaction\text{Since } E^{\circ}_{\text{cell}} < 0\text{, no spontaneous reaction occurs.} \implies \text{No Reaction}

    Correct

    Since Ecell∘=−0.190 V<0, no spontaneous reaction occurs under standard conditions (No Reaction).\text{Since } E^{\circ}_{\text{cell}} = -0.190\,\text{V} < 0\text{, no spontaneous reaction occurs under standard conditions (No Reaction).}

    Your thermodynamic reasoning that Ecell∘<0E^{\circ}_{\text{cell}} < 0 implies a non-spontaneous forward process and 'No Reaction' is logically sound, but it was evaluated using your incorrectly calculated cell potential.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly linked the sign of the standard cell potential to reaction spontaneity, knowing that Ecell∘<0E^{\circ}_{\text{cell}} < 0 implies non-spontaneity.

You correctly concluded that the prospective single-replacement reaction produces 'No Reaction' when non-spontaneous.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Direct Addition of Standard Reduction Potentials

You treated both given values as simple additive terms rather than recognizing that oxidation requires subtracting the anode reduction potential or inverting its sign.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the standard cell potential formula Ecell∘=Ecathode∘−Eanode∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} with direct addition of tabulated reduction potentials without converting one half-reaction into an oxidation potential.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Anode vs. Cathode
  • Oxidation happens at the anode; reduction happens at the cathode.

  • Write out the two half-reactions first: Ni(s)→Ni2++2e−\text{Ni}(s) \rightarrow \text{Ni}^{2+} + 2e^- (anode/oxidation) and Fe2++2e−→Fe(s)\text{Fe}^{2+} + 2e^- \rightarrow \text{Fe}(s) (cathode/reduction).

Calculate Cell Potential
  • Ecell∘=Ecathode∘−Eanode∘=Ered∘+Eox∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} = E^{\circ}_{\text{red}} + E^{\circ}_{\text{ox}}

  • Substitute reduction potentials directly into Ecathode∘−Eanode∘E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}}, or flip the sign of the anode potential before adding: −0.447 V−(−0.257 V)=−0.190 V-0.447\,\text{V} - (-0.257\,\text{V}) = -0.190\,\text{V}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the oxidation half-reaction at the anode: Ni(s)→Ni2+(aq)+2e−\text{Ni}(s) \rightarrow \text{Ni}^{2+}(aq) + 2e^-, with Ered∘(Ni2+/Ni)=−0.257 VE^{\circ}_{\text{red}}(\text{Ni}^{2+}/\text{Ni}) = -0.257\,\text{V}.

  2. Identify the reduction half-reaction at the cathode: Fe2+(aq)+2e−→Fe(s)\text{Fe}^{2+}(aq) + 2e^- \rightarrow \text{Fe}(s), with Ered∘(Fe2+/Fe)=−0.447 VE^{\circ}_{\text{red}}(\text{Fe}^{2+}/\text{Fe}) = -0.447\,\text{V}.

  3. Apply Ecell∘=Ecathode∘−Eanode∘=−0.447 V−(−0.257 V)=−0.190 VE^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} = -0.447\,\text{V} - (-0.257\,\text{V}) = -0.190\,\text{V}.

  4. Because Ecell∘=−0.190 V<0E^{\circ}_{\text{cell}} = -0.190\,\text{V} < 0, the forward reaction is non-spontaneous under standard conditions.

Final answer

Ecell∘=−0.190 VE^{\circ}_{\text{cell}} = -0.190\,\text{V}; No reaction occurs under standard conditions (No Reaction)

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the half-reactions with their designated roles (oxidation at anode, reduction at cathode) before calculating cell potentials.

  • Check that you use Ecell∘=Ecathode∘−Eanode∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} when using tabulated standard reduction potentials.

  • Review practice problems combining various metals to build fluency with the activity series and standard cell potential calculations.

OverviewACEpath Teacher's Diagnosis

03 The student reverses the sign of the oxidation potential when using the formula E°_cell = E°_cathode - E°_anode, resulting in double-reversing the sign.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Oxidation: Ni→Ni2++2e−, E∘=+0.257 V\text{Oxidation: } \text{Ni} \rightarrow \text{Ni}^{2+} + 2e^{-},\ E^{\circ} = +0.257\,\text{V}   ⟹  \implies Reduction: Fe2++2e−→Fe, E∘=−0.447 V\text{Reduction: } \text{Fe}^{2+} + 2e^{-} \rightarrow \text{Fe},\ E^{\circ} = -0.447\,\text{V}

  2. Step 2

    Ecell∘=Ecathode∘−Eanode∘=−0.447 V−(+0.257 V)=−0.704 VE^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} = -0.447\,\text{V} - (+0.257\,\text{V}) = -0.704\,\text{V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=−0.447 V−(−0.257 V)=−0.190 VE^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} = -0.447\,\text{V} - (-0.257\,\text{V}) = -0.190\,\text{V}

    When using the subtraction formula Ecell∘=Ecathode∘−Eanode∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}}, both values must be standard reduction potentials directly from the table. Because you had already flipped the sign to find Eox∘=+0.257 VE^{\circ}_{\text{ox}} = +0.257\,\text{V}, subtracting it subtracted a positive number, double-counting the oxidation reversal.

  3. Step 3

    Since Ecell∘ is negative, the reaction is not spontaneous.  ⟹  No Reaction\text{Since } E^{\circ}_{\text{cell}} \text{ is negative, the reaction is not spontaneous.} \implies \text{No Reaction}

    Correct

    Because Ecell∘=−0.190 V<0, the reaction is non-spontaneous: No Reaction.\text{Because } E^{\circ}_{\text{cell}} = -0.190\,\text{V} < 0\text{, the reaction is non-spontaneous: No Reaction.}

    Your reasoning that a negative cell potential indicates a non-spontaneous process is completely sound and yields the correct qualitative conclusion, but it relies on your calculated value from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified which species undergoes oxidation (nickel) and which undergoes reduction (iron(II)).

You accurately stated that a negative cell potential means the prospective reaction cannot proceed spontaneously under standard conditions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Double Sign Reversal in Cell Potential

You reversed the sign of the anode potential in your half-reaction list and then also subtracted it in the cell potential formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the two valid conventions for calculating Ecell∘E^{\circ}_{\text{cell}}: either use standard reduction potentials in Ecell∘=Ered, cathode∘−Ered, anode∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{red, cathode}} - E^{\circ}_{\text{red, anode}}, or add the oxidation potential via Ecell∘=Ered∘+Eox∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{red}} + E^{\circ}_{\text{ox}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Pick One Formula Convention
  • If using Ecell∘=Ecathode∘−Eanode∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}}, use tabular standard reduction potentials for both without changing any signs.

  • Check whether you already flipped the sign of the oxidation half-reaction. If you did, add the two values: Ecell∘=Ered∘+Eox∘E^{\circ}_{\text{cell}} = E^{\circ}_{\text{red}} + E^{\circ}_{\text{ox}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the standard reduction potentials directly from the problem: Ered∘(Fe2+/Fe)=−0.447 VE^{\circ}_{\text{red}}(\text{Fe}^{2+}/\text{Fe}) = -0.447\,\text{V} and Ered∘(Ni2+/Ni)=−0.257 VE^{\circ}_{\text{red}}(\text{Ni}^{2+}/\text{Ni}) = -0.257\,\text{V}.

  2. Substitute these directly into the difference formula: Ecell∘=Ecathode∘−Eanode∘=−0.447 V−(−0.257 V)=−0.190 VE^{\circ}_{\text{cell}} = E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} = -0.447\,\text{V} - (-0.257\,\text{V}) = -0.190\,\text{V}.

  3. Evaluate spontaneity: because Ecell∘<0E^{\circ}_{\text{cell}} < 0, the forward reaction is non-spontaneous.

Final answer

Ecell∘=−0.190 VE^{\circ}_{\text{cell}} = -0.190\,\text{V}; No Reaction

NEXT STEPS
Final Takeaways from Your Teacher
  • Commit to one formula for cell potential: either Ecathode∘−Eanode∘E^{\circ}_{\text{cathode}} - E^{\circ}_{\text{anode}} (both as reduction potentials) or Ered∘+Eox∘E^{\circ}_{\text{red}} + E^{\circ}_{\text{ox}}.

  • Practice calculating cell potentials with negative standard reduction potentials to build confidence handling double negatives.

Lock it in

Similar question

01

A strip of copper wire is placed into a solution of lead(II) nitrate: Cu(s)+PbX2+(aq)→CuX2+(aq)+Pb(s)\ce{Cu}(s) + \ce{Pb^{2+}}(aq) \rightarrow \ce{Cu^{2+}}(aq) + \ce{Pb}(s). Given E∘(CuX2+/Cu)=+0.342 VE^{\circ}(\ce{Cu^{2+}/Cu}) = +0.342\,\text{V} and E∘(PbX2+/Pb)=−0.126 VE^{\circ}(\ce{Pb^{2+}/Pb}) = -0.126\,\text{V}, calculate Ecell∘E^{\circ}_{\text{cell}} and state whether a reaction occurs.

Answer

Ecell∘=−0.468 VE^{\circ}_{\text{cell}} = -0.468\,\text{V}; No Reaction. Reduction is PbX2+/Pb\ce{Pb^{2+}/Pb} and oxidation is Cu/CuX2+\ce{Cu/Cu^{2+}}, giving Ecell∘=−0.126 V−(+0.342 V)=−0.468 V<0E^{\circ}_{\text{cell}} = -0.126\,\text{V} - (+0.342\,\text{V}) = -0.468\,\text{V} < 0.

02

Predict whether solid zinc reacts spontaneously with aqueous tin(II) chloride at 298 K298\,\text{K}: Zn(s)+SnX2+(aq)→ZnX2+(aq)+Sn(s)\ce{Zn}(s) + \ce{Sn^{2+}}(aq) \rightarrow \ce{Zn^{2+}}(aq) + \ce{Sn}(s). Standard potentials: E∘(ZnX2+/Zn)=−0.762 VE^{\circ}(\ce{Zn^{2+}/Zn}) = -0.762\,\text{V} and E∘(SnX2+/Sn)=−0.138 VE^{\circ}(\ce{Sn^{2+}/Sn}) = -0.138\,\text{V}. Find Ecell∘E^{\circ}_{\text{cell}} and the final products.

Answer

Ecell∘=+0.624 VE^{\circ}_{\text{cell}} = +0.624\,\text{V}; the reaction is spontaneous and forms ZnClX2(aq)+Sn(s)\ce{ZnCl2}(aq) + \ce{Sn}(s). Reduction is tin(II) (−0.138 V-0.138\,\text{V}) and oxidation is zinc (−0.762 V-0.762\,\text{V}), so Ecell∘=−0.138 V−(−0.762 V)=+0.624 V>0E^{\circ}_{\text{cell}} = -0.138\,\text{V} - (-0.762\,\text{V}) = +0.624\,\text{V} > 0.

03

An electrochemical cell is set up according to the skeletal reaction 3 Ag(s)+CrX3+(aq)→3 AgX+(aq)+Cr(s)\ce{3Ag}(s) + \ce{Cr^{3+}}(aq) \rightarrow \ce{3Ag^+}(aq) + \ce{Cr}(s). Given E∘(AgX+/Ag)=+0.799 VE^{\circ}(\ce{Ag^+/Ag}) = +0.799\,\text{V} and E∘(CrX3+/Cr)=−0.744 VE^{\circ}(\ce{Cr^{3+}/Cr}) = -0.744\,\text{V}, determine Ecell∘E^{\circ}_{\text{cell}}, the spontaneous direction, and whether silver metal will dissolve in a chromium(III) solution.

Answer

Ecell∘=−1.543 VE^{\circ}_{\text{cell}} = -1.543\,\text{V}; the reverse reaction is spontaneous, so silver metal will not dissolve (No Reaction). Calculation: Ecell∘=E∘(CrX3+/Cr)−E∘(AgX+/Ag)=−0.744 V−(+0.799 V)=−1.543 VE^{\circ}_{\text{cell}} = E^{\circ}(\ce{Cr^{3+}/Cr}) - E^{\circ}(\ce{Ag^+/Ag}) = -0.744\,\text{V} - (+0.799\,\text{V}) = -1.543\,\text{V}.

Loading workspace…