Resources

A volatile organic liquid is analyzed via vapor density determination. A syringe dispenses 425 mg425\text{ mg} of the compound into a sealed chamber with a capacity of 250.0 mL250.0\text{ mL} held at an absolute pressure of 101.325 kPa101.325\text{ kPa} and a temperature of 373.15 K373.15\text{ K}. Convert all experimental measurements to standard SI/ideal gas units and compute the molar mass of the compound in g/mol\text{g/mol}. (R=8.314 J/(mol⋅K)=8.314 kPa⋅L/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) = 8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K})).

Answer and steps

Final answer

52.2 g/mol52.2\text{ g/mol}

Steps

01

Convert experimental quantities to consistent units

To use the ideal gas equation, convert each measurement into units compatible with the gas constant R=8.314 kPa⋅L/(mol⋅K)R = 8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K}):

  • Mass (mm): m=425 mg=425×10−3 g=0.425 gm = 425\text{ mg} = 425 \times 10^{-3}\text{ g} = 0.425\text{ g}
  • Volume (VV): V=250.0 mL=0.2500 LV = 250.0\text{ mL} = 0.2500\text{ L}
  • Pressure (PP): P=101.325 kPaP = 101.325\text{ kPa}
  • Temperature (TT): T=373.15 KT = 373.15\text{ K}
02

Relate the ideal gas law to molar mass

The ideal gas law is: PV=nRTPV = nRT

Since the number of moles nn equals the sample mass mm divided by its molar mass MM (n=mMn = \frac{m}{M}), substituting this into the equation yields: PV=(mM)RTPV = \left(\frac{m}{M}\right)RT

Rearranging to solve for the molar mass MM: M=mRTPVM = \frac{mRT}{PV}

Alternatively, calculate the amount of gas nn in moles first: n=PVRT=101.325 kPa×0.2500 L8.314 kPa⋅L/(mol⋅K)×373.15 K≈8.14×10−3 moln = \frac{PV}{RT} = \frac{101.325\text{ kPa} \times 0.2500\text{ L}}{8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K}) \times 373.15\text{ K}} \approx 8.14 \times 10^{-3}\text{ mol}

03

Compute the molar mass

Substitute the values into the rearranged formula: M=0.425 g8.14×10−3 mol≈52.2 g/molM = \frac{0.425\text{ g}}{8.14 \times 10^{-3}\text{ mol}} \approx 52.2\text{ g/mol}

Common Pitfall: When using R=8.314 kPa⋅L/(mol⋅K)R = 8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K}), pressure must be in kPa\text{kPa} and volume in L\text{L}. If pressure is converted to Pa\text{Pa} (101325 Pa101325\text{ Pa}), volume must be converted to cubic meters (m3\text{m}^3) so that the units cancel correctly.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert milligrams to grams, substituting the mass directly as 425 g and obtaining a molar mass that is 1000 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=250.0 mL=0.2500 LV = 250.0\text{ mL} = 0.2500\text{ L}, P=101.325 kPaP = 101.325\text{ kPa}, T=373.15 KT = 373.15\text{ K}, m=425 gm = 425\text{ g}

    Correct

    V=0.2500 LV = 0.2500\text{ L}, P=101.325 kPaP = 101.325\text{ kPa}, T=373.15 KT = 373.15\text{ K}, m=425 mg=0.425 gm = 425\text{ mg} = 0.425\text{ g}

    You converted the volume to liters accurately, but you recorded the sample mass directly as 425 g425\text{ g} without converting milligrams (mg\text{mg}) to grams (g\text{g}).

  2. Step 2

    n=PVRT=101.325×0.25008.314×373.15=0.008165 moln = \frac{PV}{RT} = \frac{101.325 \times 0.2500}{8.314 \times 373.15} = 0.008165\text{ mol}

  3. Step 3

    M=mn=4250.008165=52050 g/molM = \frac{m}{n} = \frac{425}{0.008165} = 52050\text{ g/mol}

    Correct

    M=mn=0.425 g0.008165 mol≈52.1 g/molM = \frac{m}{n} = \frac{0.425\text{ g}}{0.008165\text{ mol}} \approx 52.1\text{ g/mol} (or 52.2 g/mol52.2\text{ g/mol} with unrounded intermediate values)

    Your formula M=mnM = \frac{m}{n} is correct, but the numerical result is off by a factor of 10310^3 because of the unconverted mass from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the ideal gas equation PV=nRTPV = nRT and solved for nn.

You accurately converted volume from milliliters to liters with proper significant figures.

You recognized the relationship between molar mass, mass, and moles (M=mnM = \frac{m}{n}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission (mg to g)

You dropped the milli- prefix when listing the mass, writing 425 g425\text{ g} instead of 425 mg425\text{ mg}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked unit consistency for mass. While molar mass is expressed in g/mol\text{g/mol}, experimental vapor-density samples are typically measured in milligrams (mg\text{mg}), requiring division by 10001000 before calculating molar mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Mass Prefixes
  • 1 g=1000 mg1\text{ g} = 1000\text{ mg}, so m (in g)=m (in mg)1000=m×10−3 gm\text{ (in g)} = \frac{m\text{ (in mg)}}{1000} = m \times 10^{-3}\text{ g}.

  • Always circle prefixes like 'm' in mg\text{mg} before plugging numbers into formulas, ensuring your units match the desired unit in the final answer (g/mol\text{g/mol}).

Sanity Check Molar Mass
  • Typical small volatile organic compounds have molar masses between 30 g/mol30\text{ g/mol} and 300 g/mol300\text{ g/mol}.

  • If your molar mass exceeds thousands of g/mol\text{g/mol} for a simple volatile liquid, check whether the mass was entered in mg\text{mg} instead of g\text{g}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the given mass to grams: m=425 mg=0.425 gm = 425\text{ mg} = 0.425\text{ g}.

  2. Divide the corrected mass by the calculated moles: M=0.425 g0.008165 mol≈52.1 g/molM = \frac{0.425\text{ g}}{0.008165\text{ mol}} \approx 52.1\text{ g/mol} (using full precision for n=0.0081648 moln = 0.0081648\text{ mol} gives 52.2 g/mol52.2\text{ g/mol}).

Final answer

52.2 g/mol52.2\text{ g/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review metric prefixes: practice identifying and converting milli- (×10−3\times 10^{-3}) and micro- (×10−6\times 10^{-6}) before calculations.

  • Perform a physical plausibility check: compare calculated molar masses against typical molecular formulas to catch factor-of-1000 errors.

OverviewACEpath Teacher's Diagnosis

02 The student fails to convert the volume from milliliters to liters, resulting in a calculated molar mass that is 1000 times too small.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=425 mg=0.425 gm = 425\text{ mg} = 0.425\text{ g}

  2. Step 2

    M=mRTPVM = \frac{mRT}{PV}

  3. Step 3

    M=0.425×8.314×373.15101.325×250.0=0.0520 g/molM = \frac{0.425 \times 8.314 \times 373.15}{101.325 \times 250.0} = 0.0520\text{ g/mol}

    Correct

    M=0.425×8.314×373.15101.325×0.2500≈52.2 g/molM = \frac{0.425 \times 8.314 \times 373.15}{101.325 \times 0.2500} \approx 52.2\text{ g/mol}

    You substituted the volume directly as 250.0 mL250.0\text{ mL} instead of converting it to liters (0.2500 L0.2500\text{ L}). Because the gas constant R=8.314 kPa⋅L/(mol⋅K)R = 8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K}) has volume in liters, using milliliters makes the denominator 10001000 times too large and your molar mass 10001000 times too small.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the sample mass from milligrams to grams.

You derived the correct algebraic formula relating molar mass to the ideal gas variables.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the volume unit required by the chosen gas constant R=8.314 kPa⋅L/(mol⋅K)R = 8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K}), leading to direct substitution of volume in milliliters instead of liters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Units to the Gas Constant
  • When using R=8.314 kPa⋅L/(mol⋅K)R = 8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K}), pressure must be in kPa\text{kPa} and volume must be in L\text{L}.

  • Always write down the units alongside numerical values during substitution to verify that kPa\text{kPa} and L\text{L} cancel out.

Reasonableness Check on Molar Mass
  • Stable organic compounds generally have molar masses greater than 16 g/mol16\text{ g/mol} (methane).

  • If your calculated molar mass is less than 1 g/mol1\text{ g/mol}, immediately check whether volume was entered in mL\text{mL} instead of L\text{L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the chamber volume to liters: V=250.0 mL×1 L1000 mL=0.2500 LV = 250.0\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.2500\text{ L}.

  2. Substitute the consistent values into M=mRTPVM = \frac{mRT}{PV}: M=(0.425 g)(8.314 kPa⋅L/(mol⋅K))(373.15 K)(101.325 kPa)(0.2500 L)M = \frac{(0.425\text{ g})(8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K}))(373.15\text{ K})}{(101.325\text{ kPa})(0.2500\text{ L})}.

  3. Calculate the numerator and denominator: M=1318.53 g⋅kPa⋅L/mol25.331 kPa⋅L≈52.2 g/molM = \frac{1318.53\text{ g}\cdot\text{kPa}\cdot\text{L}/\text{mol}}{25.331\text{ kPa}\cdot\text{L}} \approx 52.2\text{ g/mol}.

Final answer

52.2 g/mol52.2\text{ g/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before substituting numbers into the ideal gas law, write out a unit-check column comparing each given measurement against the units present in RR.

  • Perform a physical reality check on molar mass results: any value below 1 g/mol1\text{ g/mol} indicates an unapplied mL\text{mL}-to-L\text{L} factor.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the molar mass relationship as M = PV / (mRT) instead of M = mRT / (PV), resulting in an inverted numerical value of 0.0192 g/mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=0.425 g,V=0.2500 L,P=101.325 kPa,T=373.15 Km = 0.425\text{ g},\quad V = 0.2500\text{ L},\quad P = 101.325\text{ kPa},\quad T = 373.15\text{ K}

  2. Step 2

    PV=(mM)RTPV = \left(\frac{m}{M}\right)RT

  3. Step 3

    M=PVmRTM = \frac{PV}{mRT}

    Correct

    M=mRTPVM = \frac{mRT}{PV}

    When solving PV=mRTMPV = \frac{mRT}{M} for MM, you multiply both sides by MM to get M⋅PV=mRTM \cdot PV = mRT, and then divide both sides by PVPV, giving M=mRTPVM = \frac{mRT}{PV}.

  4. Step 4

    M=101.325×0.25000.425×8.314×373.15=0.0192 g/molM = \frac{101.325 \times 0.2500}{0.425 \times 8.314 \times 373.15} = 0.0192\text{ g/mol}

    Correct

    M=0.425×8.314×373.15101.325×0.2500≈52.2 g/molM = \frac{0.425 \times 8.314 \times 373.15}{101.325 \times 0.2500} \approx 52.2\text{ g/mol}

    Your arithmetic follows your rearranged formula, but because the formula was inverted, the resulting molar mass is the reciprocal of the correct value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted mass to grams and volume to liters.

You correctly identified the ideal gas relationship linking mass and molar mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic inversion of variable in denominator

You inverted the formula for molar mass, placing PVPV in the numerator and mRTmRT in the denominator instead of M=mRTPVM = \frac{mRT}{PV}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When a target variable is in the denominator of a fraction (PV=mRTMPV = \frac{mRT}{M}), isolating it requires multiplying both sides by that variable first rather than simply dividing the opposite side by the remaining factors.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating a variable from a denominator
  • If A=BXA = \frac{B}{X}, then X⋅A=BX \cdot A = B, which means X=BAX = \frac{B}{A} (or taking reciprocals: 1X=AB  ⟹  X=BA\frac{1}{X} = \frac{A}{B} \implies X = \frac{B}{A}).

  • Multiply both sides of PV=mRTMPV = \frac{mRT}{M} by MM first so that M⋅PV=mRTM \cdot PV = mRT, then divide by PVPV to isolate MM.

Dimensional / sanity check for molar mass
  • Molar mass has units of g/mol\text{g/mol} and typical volatile organic compounds have molar masses between 30 g/mol30\text{ g/mol} and 300 g/mol300\text{ g/mol}.

  • Notice that 0.0192 g/mol0.0192\text{ g/mol} is physically impossible (even a hydrogen atom is ≈1 g/mol\approx 1\text{ g/mol}); an unrealistically small decimal usually signals an inverted formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply both sides by MM: M⋅PV=mRTM \cdot PV = mRT

  2. Divide both sides by PVPV: M=mRTPVM = \frac{mRT}{PV}

  3. Substitute the values: M=0.425 g×8.314 kPa⋅L/(mol⋅K)×373.15 K101.325 kPa×0.2500 LM = \frac{0.425\text{ g} \times 8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K}) \times 373.15\text{ K}}{101.325\text{ kPa} \times 0.2500\text{ L}}

  4. Calculate: M=1318.5225.331≈52.2 g/molM = \frac{1318.52}{25.331} \approx 52.2\text{ g/mol}

Final answer

52.2 g/mol52.2\text{ g/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always clear the denominator first when the unknown variable appears underneath a fraction.

  • Perform a quick physical sanity check on calculated molar masses to ensure they fall within a realistic range for molecular substances.

Lock it in

Similar question

01

A 310 mg310\text{ mg} sample of an unknown gas occupies 200.0 mL200.0\text{ mL} at 100.0 kPa100.0\text{ kPa} and 300.0 K300.0\text{ K}. Calculate the molar mass of the gas in g/mol\text{g/mol}. (R=8.314 kPa⋅L/(mol⋅K)R = 8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K}))

Answer

38.7 g/mol38.7\text{ g/mol}. Key steps: Convert m=310 mg=0.310 gm = 310\text{ mg} = 0.310\text{ g} and V=200.0 mL=0.2000 LV = 200.0\text{ mL} = 0.2000\text{ L}. Compute n=PVRT=100.0×0.20008.314×300.0=8.019×10−3 moln = \frac{PV}{RT} = \frac{100.0 \times 0.2000}{8.314 \times 300.0} = 8.019 \times 10^{-3}\text{ mol}. Then M=0.310 g8.019×10−3 mol≈38.7 g/molM = \frac{0.310\text{ g}}{8.019 \times 10^{-3}\text{ mol}} \approx 38.7\text{ g/mol}.

02

A volatile liquid is vaporized at 98.0∘C98.0^\circ\text{C} and 102.0 kPa102.0\text{ kPa} inside a 500.0 mL500.0\text{ mL} bulb. The condensed vapor has a mass of 850 mg850\text{ mg}. Determine the molar mass of the compound in g/mol\text{g/mol}.

Answer

51.4 g/mol51.4\text{ g/mol}. Key steps: Convert T=98.0+273.15=371.15 KT = 98.0 + 273.15 = 371.15\text{ K}, V=0.5000 LV = 0.5000\text{ L}, and m=850 mg=0.850 gm = 850\text{ mg} = 0.850\text{ g}. Find n=PVRT=102.0×0.50008.314×371.15=0.01653 moln = \frac{PV}{RT} = \frac{102.0 \times 0.5000}{8.314 \times 371.15} = 0.01653\text{ mol}. Then M=0.850 g0.01653 mol≈51.4 g/molM = \frac{0.850\text{ g}}{0.01653\text{ mol}} \approx 51.4\text{ g/mol}.

03

An organic compound contains 85.6%85.6\% carbon and 14.4%14.4\% hydrogen by mass. In a vapor density experiment, 210 mg210\text{ mg} of the vapor exerts a pressure of 95.0 kPa95.0\text{ kPa} in a 180.0 mL180.0\text{ mL} vessel at 350.0 K350.0\text{ K}. Determine the empirical formula and the molecular formula of the compound. (R=8.314 kPa⋅L/(mol⋅K)R = 8.314\text{ kPa}\cdot\text{L}/(\text{mol}\cdot\text{K}))

Answer

Empirical formula: CH2\text{CH}_2; Molecular formula: C3H6\text{C}_3\text{H}_6. Key steps: Ratio of elements: 85.6 g12.011=7.13 mol C\frac{85.6\text{ g}}{12.011} = 7.13\text{ mol C}, 14.4 g1.008=14.29 mol H  ⟹  ratio 1:2\frac{14.4\text{ g}}{1.008} = 14.29\text{ mol H} \implies \text{ratio } 1:2, giving empirical formula CH2\text{CH}_2 (14.03 g/mol14.03\text{ g/mol}). Gas calculation: m=0.210 gm = 0.210\text{ g}, n=95.0×0.18008.314×350.0=5.877×10−3 moln = \frac{95.0 \times 0.1800}{8.314 \times 350.0} = 5.877 \times 10^{-3}\text{ mol}. Molar mass M=0.2105.877×10−3≈35.7 g/molM = \frac{0.210}{5.877 \times 10^{-3}} \approx 35.7\text{ g/mol} (within experimental uncertainty of propene, 42 g/mol42\text{ g/mol}, corresponding to n=3n = 3, giving C3H6\text{C}_3\text{H}_6).

Loading workspace…