Resources

A standard laboratory calorimetry experiment supplies exactly 5.67×104 J5.67\times 10^4\text{ J} of thermal energy to an unknown mass mm of liquid water initially at its normal boiling point of 100.0∘C100.0^\circ\text{C}. This heat input converts a portion of the water into steam at 100.0∘C100.0^\circ\text{C} while leaving 12.5 g12.5\text{ g} of liquid water unvaporized in the container. Given that the enthalpy of vaporization of water at 100.0∘C100.0^\circ\text{C} is ΔHvap=2.260×103 J/g\Delta H_{\text{vap}} = 2.260\times 10^3\text{ J}/\text{g}, calculate the initial total mass mm of liquid water present before heating. Express your answer in grams to three significant figures.

Answer and steps

Final answer

37.6 g37.6\text{ g}

Steps

01

Relate heat input to the mass of vaporized water

During a phase change at a constant temperature (the normal boiling point of water, 100.0∘C100.0^\circ\text{C}), thermal energy is used exclusively to overcome intermolecular hydrogen bonds rather than to increase the temperature. The heat absorbed qq relates to the vaporized mass mvapm_{\text{vap}} and the specific enthalpy of vaporization ΔHvap\Delta H_{\text{vap}} by:

q=mvap⋅ΔHvapq = m_{\text{vap}} \cdot \Delta H_{\text{vap}}

02

Calculate the mass of water converted to steam

Rearranging the formula to solve for the mass of vaporized water:

mvap=qΔHvapm_{\text{vap}} = \frac{q}{\Delta H_{\text{vap}}}

Substitute the given values into the equation:

mvap=5.67×104 J2.260×103 J/g≈25.09 gm_{\text{vap}} = \frac{5.67 \times 10^4\text{ J}}{2.260 \times 10^3\text{ J/g}} \approx 25.09\text{ g}

03

Determine the total initial mass of water

The initial mass mm consists of the water that was vaporized into steam plus the unvaporized liquid water remaining in the container:

m=mvap+mremainingm = m_{\text{vap}} + m_{\text{remaining}}

Substitute the values:

m=25.09 g+12.5 g=37.59 gm = 25.09\text{ g} + 12.5\text{ g} = 37.59\text{ g}

Rounding to three significant figures gives:

m=37.6 gm = 37.6\text{ g}

Common Pitfall: Do not confuse the vaporized mass (25.1 g25.1\text{ g}) with the initial total mass. The problem states that 12.5 g12.5\text{ g} of liquid remained after heating, so the vaporized portion must be added back to find the starting quantity.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the vaporized mass correctly using the heat of vaporization but forgets to add the remaining unvaporized liquid water to find the total initial mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    q=m×ΔHvap  ⟹  m=qΔHvap=5.67×104 J2.260×103 J/g=25.1 gq = m \times \Delta H_{\text{vap}} \implies m = \frac{q}{\Delta H_{\text{vap}}} = \frac{5.67 \times 10^4\text{ J}}{2.260 \times 10^3\text{ J/g}} = 25.1\text{ g}

  2. Step 2

    m=25.1 gm = 25.1\text{ g}

    Correct

    mtotal=mvap+mremaining=25.09 g+12.5 g=37.6 gm_{\text{total}} = m_{\text{vap}} + m_{\text{remaining}} = 25.09\text{ g} + 12.5\text{ g} = 37.6\text{ g}

    The value 25.1 g25.1\text{ g} accounts only for the water that boiled away into steam. Because 12.5 g12.5\text{ g} of liquid water remained in the container, you need to add the remaining mass to the vaporized mass to find the total initial mass.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the phase-change heat formula q=mΔHvapq = m\Delta H_{\text{vap}}.

You correctly solved for the mass of water vaporized by dividing the supplied thermal energy by the enthalpy of vaporization.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Remaining Mass in Mass Balance

You stopped after finding the vaporized mass and reported it as the total initial mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the mass transformed during a phase change (mphasem_{\text{phase}}) with the total system mass (mtotalm_{\text{total}}) when a phase transition is incomplete.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Mass Variables Explicitly
  • In incomplete phase changes, q=mchanged⋅ΔHq = m_{\text{changed}} \cdot \Delta H, where mchanged≤mtotalm_{\text{changed}} \le m_{\text{total}}.

  • Label your calculated mass as mvapm_{\text{vap}} rather than just mm so you do not mistake it for the initial total mass.

Apply Mass Conservation
  • Total initial mass equals the mass that underwent the phase change plus the mass that remained unchanged.

  • Always check whether any unreacted or unchanged substance remains: minitial=mvap+mremainingm_{\text{initial}} = m_{\text{vap}} + m_{\text{remaining}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the total mass balance: m=mvap+mliquid, remainingm = m_{\text{vap}} + m_{\text{liquid, remaining}}.

  2. Substitute the unrounded vaporized mass and the remaining mass: m=25.09 g+12.5 g=37.59 gm = 25.09\text{ g} + 12.5\text{ g} = 37.59\text{ g}.

  3. Round to three significant figures: m=37.6 gm = 37.6\text{ g}.

Final answer

37.6 g37.6\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Use distinct subscripts such as mvapm_{\text{vap}} and minitialm_{\text{initial}} whenever a problem describes partial phase changes.

  • Reread the prompt before writing your final line to verify whether any unvaporized or unmelted sample remains in the container.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts the unvaporized mass from the vaporized mass instead of adding it to determine the total initial mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mvap=qΔHvap  ⟹  mvap=5.67×104 J2.260×103 J/g=25.09 gm_{\text{vap}} = \frac{q}{\Delta H_{\text{vap}}} \implies m_{\text{vap}} = \frac{5.67 \times 10^4\text{ J}}{2.260 \times 10^3\text{ J/g}} = 25.09\text{ g}

  2. Step 2

    m=mvap−12.5 g  ⟹  m=25.09 g−12.5 g=12.6 gm = m_{\text{vap}} - 12.5\text{ g} \implies m = 25.09\text{ g} - 12.5\text{ g} = 12.6\text{ g}

    Correct

    m=mvap+mremaining=25.09 g+12.5 g=37.6 gm = m_{\text{vap}} + m_{\text{remaining}} = 25.09\text{ g} + 12.5\text{ g} = 37.6\text{ g}

    By conservation of mass, the total starting liquid equals the portion that boiled away into steam plus the unvaporized liquid that remained in the container. Subtracting the remaining mass gave an initial mass smaller than the steam produced.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the enthalpy of vaporization to calculate the mass of water converted to steam.

You maintained appropriate significant figures in your intermediate calculation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass Conservation Sign Error

You set up the mass balance as minitial=mvap−mremainingm_{\text{initial}} = m_{\text{vap}} - m_{\text{remaining}} instead of adding the two parts together.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the vaporized portion as the whole sample rather than recognizing that total initial mass is partitioned into vaporized mass and remaining liquid mass (mtotal=mvap+mremainingm_{\text{total}} = m_{\text{vap}} + m_{\text{remaining}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Conservation of Mass in Phase Changes
  • During partial vaporization in a closed or accounted system, minitial=mvaporized+mremainingm_{\text{initial}} = m_{\text{vaporized}} + m_{\text{remaining}}.

  • Always check that the initial quantity is greater than any individual part (minitial>mvapm_{\text{initial}} > m_{\text{vap}} and minitial>mremainingm_{\text{initial}} > m_{\text{remaining}}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the total mass relation: m=mvap+mremainingm = m_{\text{vap}} + m_{\text{remaining}}

  2. Substitute the values: m=25.09 g+12.5 g=37.59 gm = 25.09\text{ g} + 12.5\text{ g} = 37.59\text{ g}

  3. Round to three significant figures: m=37.6 gm = 37.6\text{ g}

Final answer

37.6 g37.6\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down a simple 'before and after' mass balance diagram before substituting numbers.

  • Perform a quick reality check on your final mass: the starting mass must be strictly larger than the mass that boiled away.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the heat formula by dividing the enthalpy of vaporization by the supplied heat energy rather than dividing heat by enthalpy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mvap=ΔHvapq  ⟹  mvap=2.260×103 J/g5.67×104 J=0.03986 gm_{\text{vap}} = \frac{\Delta H_{\text{vap}}}{q} \implies m_{\text{vap}} = \frac{2.260 \times 10^3\text{ J/g}}{5.67 \times 10^4\text{ J}} = 0.03986\text{ g}

    Correct

    mvap=qΔHvap=5.67×104 J2.260×103 J/g≈25.09 gm_{\text{vap}} = \frac{q}{\Delta H_{\text{vap}}} = \frac{5.67 \times 10^4\text{ J}}{2.260 \times 10^3\text{ J/g}} \approx 25.09\text{ g}

    To isolate mass from q=mvap⋅ΔHvapq = m_{\text{vap}} \cdot \Delta H_{\text{vap}}, you must divide the supplied thermal energy qq by the enthalpy of vaporization ΔHvap\Delta H_{\text{vap}}. Inverting this ratio yields units of g−1\text{g}^{-1} rather than grams.

  2. Step 2

    m=0.03986 g+12.5 g  ⟹  m=12.5 gm = 0.03986\text{ g} + 12.5\text{ g} \implies m = 12.5\text{ g}

    Correct

    m=25.09 g+12.5 g=37.59 g≈37.6 gm = 25.09\text{ g} + 12.5\text{ g} = 37.59\text{ g} \approx 37.6\text{ g}

    Your strategy of adding the vaporized mass to the unvaporized mass is correct, but the calculated total mass is inaccurate because of the incorrect value propagated from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the total starting mass equals the vaporized mass added to the remaining liquid mass.

You correctly identified the relevant calorimetric quantities from the problem statement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted algebraic formula

You set mvap=ΔHvapqm_{\text{vap}} = \frac{\Delta H_{\text{vap}}}{q} instead of mvap=qΔHvapm_{\text{vap}} = \frac{q}{\Delta H_{\text{vap}}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You solved for the unknown mass algebraically without performing a dimensional analysis check to ensure the resulting unit was grams rather than inverse grams.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis
  • Units on both sides of an isolated variable equation must match.

  • Check that JJ/g=g\frac{\text{J}}{\text{J/g}} = \text{g}, whereas J/gJ=g−1\frac{\text{J/g}}{\text{J}} = \text{g}^{-1}.

Phase-Change Heat Formula
  • q=m⋅ΔHq = m \cdot \Delta H

  • Divide both sides by ΔH\Delta H to isolate m=qΔHm = \frac{q}{\Delta H}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Solve for the vaporized mass: mvap=qΔHvap=5.67×104 J2.260×103 J/g≈25.088 gm_{\text{vap}} = \frac{q}{\Delta H_{\text{vap}}} = \frac{5.67 \times 10^4\text{ J}}{2.260 \times 10^3\text{ J/g}} \approx 25.088\text{ g}.

  2. Add the remaining unvaporized liquid water: m=25.088 g+12.5 g=37.588 gm = 25.088\text{ g} + 12.5\text{ g} = 37.588\text{ g}.

  3. Round to three significant figures: m=37.6 gm = 37.6\text{ g}.

Final answer

37.6 g37.6\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the primary formula q=m⋅ΔHvapq = m \cdot \Delta H_{\text{vap}} before rearranging.

  • Perform dimensional analysis on your rearranged expression to ensure the units cancel to grams.

  • Practice isolating variables with composite units like J/g\text{J/g} or kJ/mol\text{kJ/mol}.

Lock it in

Similar question

01

A beaker contains an unknown mass of ice at 0.0∘C0.0^\circ\text{C}. After absorbing 1.67×104 J1.67 \times 10^4\text{ J} of heat, a portion of the ice melts, leaving 15.0 g15.0\text{ g} of solid ice intact. Given ΔHfus=3.34×102 J/g\Delta H_{\text{fus}} = 3.34 \times 10^2\text{ J/g}, calculate the initial mass of the ice present before heating.

Answer

65.0 g65.0\text{ g}. Calculate the melted mass: mmelted=qΔHfus=1.67×104 J334 J/g=50.0 gm_{\text{melted}} = \frac{q}{\Delta H_{\text{fus}}} = \frac{1.67 \times 10^4\text{ J}}{334\text{ J/g}} = 50.0\text{ g}. Total initial mass: mtotal=50.0 g+15.0 g=65.0 gm_{\text{total}} = 50.0\text{ g} + 15.0\text{ g} = 65.0\text{ g}.

02

An open flask holds 85.0 g85.0\text{ g} of ethanol at its boiling point of 78.3∘C78.3^\circ\text{C}. If 3.41×104 J3.41 \times 10^4\text{ J} of heat is supplied and ΔHvap=8.53×102 J/g\Delta H_{\text{vap}} = 8.53 \times 10^2\text{ J/g}, determine the mass of liquid ethanol remaining in the flask.

Answer

45.0 g45.0\text{ g}. Mass vaporized: mvap=3.41×104 J8.53×102 J/g=40.0 gm_{\text{vap}} = \frac{3.41 \times 10^4\text{ J}}{8.53 \times 10^2\text{ J/g}} = 40.0\text{ g}. Mass remaining: mremaining=minitial−mvap=85.0 g−40.0 g=45.0 gm_{\text{remaining}} = m_{\text{initial}} - m_{\text{vap}} = 85.0\text{ g} - 40.0\text{ g} = 45.0\text{ g}.

03

A 100.0 g100.0\text{ g} mixture of liquid water and steam exists at 100.0∘C100.0^\circ\text{C} in a closed piston-cylinder. Exactly 4.52×104 J4.52 \times 10^4\text{ J} of heat is removed at constant pressure, condensing some steam. If 8.0 g8.0\text{ g} of steam remains at the end, what was the initial mass of steam present before cooling? (Use ΔHvap=2.260×103 J/g\Delta H_{\text{vap}} = 2.260 \times 10^3\text{ J/g})

Answer

28.0 g28.0\text{ g}. Mass of steam condensed: mcond=qΔHvap=4.52×104 J2.260×103 J/g=20.0 gm_{\text{cond}} = \frac{q}{\Delta H_{\text{vap}}} = \frac{4.52 \times 10^4\text{ J}}{2.260 \times 10^3\text{ J/g}} = 20.0\text{ g}. Initial steam mass: msteam, initial=mcond+msteam, remaining=20.0 g+8.0 g=28.0 gm_{\text{steam, initial}} = m_{\text{cond}} + m_{\text{steam, remaining}} = 20.0\text{ g} + 8.0\text{ g} = 28.0\text{ g}.

Loading workspace…