Resources
A chemical reaction takes place inside a rigid, closed cylinder fitted with a fixed piston. During the reaction, the mixture releases of thermal energy to the surrounding water bath, while the volume of the cylinder remains strictly constant at . (a) Define the system and the surroundings. (b) Determine the values of heat (), work (), and the change in internal energy () for the system, including appropriate algebraic signs.
Answer and steps
Final answer
(a) System: the reacting chemical mixture inside the cylinder; Surroundings: the rigid cylinder walls, the piston, and the external water bath. (b) , , and .
Steps
Part (a): Identifying the System and the Surroundings
- The System: In thermodynamics, the system is the specific part of the universe chosen for study. Here, the process of interest is the chemical transformation occurring inside the cylinder:
- The Surroundings: The surroundings comprise everything in the universe outside the system that can interact with it by exchanging energy or matter. In this setup, this includes:
Part (b): Calculating , , and with Proper Signs
-
Determining Heat ():
- Sign convention: Heat absorbed by the system from the surroundings is positive (); heat released by the system to the surroundings is negative ().
- The problem states that the mixture releases of thermal energy to the surroundings. Therefore:
-
Determining Work ():
- Pressure-volume work is given by the relation:
- Because the cylinder is rigid and the piston is fixed, the volume cannot change ().
- With no change in volume, no expansion or compression work is done on or by the system:
-
Determining the Change in Internal Energy ():
- According to the First Law of Thermodynamics:
- Substituting the values obtained for and :
Common Pitfall: Do not confuse the sign of heat (). Always view energy flow from the system's perspective: if the system loses energy to the water bath, energy leaves the system, so both and must be negative.
Typical errors
01 The student misinterprets heat released by the system as a positive quantity from the perspective of the surroundings, resulting in an incorrect sign for q and ΔU.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
⟹
- Step 2Correct
Thermodynamic quantities are defined from the perspective of the system. Because thermal energy flows out of the system into the surroundings, heat must be negative ().
- Step 3
- Step 4Correct
You applied the First Law of Thermodynamics correctly, but the result carried over the incorrect positive sign from your value of .
WHAT YOU DID WELL
Compliments from Your TeacherYou clearly distinguished between the thermodynamic system and its surroundings.
You correctly identified that a rigid, fixed-volume container performs no pressure-volume work ().
You stated and applied the First Law of Thermodynamics formula, .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the released heat as a positive value, viewing the energy transfer from the perspective of the surroundings rather than the system.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the direction of energy flow with its algebraic sign: by convention in chemistry, all thermodynamic signs must reflect the perspective of the system (energy exiting is negative, energy entering is positive).
REASONING PATH
Your ACEpath teacher’s suggested approach- System-Centric Sign Convention
Always view and as changes to the system's energy bank: energy gained by the system is positive (); energy lost by the system to the surroundings is negative ().
Whenever a problem says thermal energy is 'released', 'evolved', or 'lost' by the system, immediately write .
CORRECTED PATH
ACEpath Teacher's DemonstrationSince the system releases to the water bath, heat leaves the system: .
Substitute the corrected heat value and into the First Law: .
(a) System: the reacting chemical mixture inside the cylinder; Surroundings: the water bath, cylinder, and fixed piston. (b) , , and .
02 The student calculates work using pressure-volume expansion with the given volume instead of the change in volume, incorrectly producing non-zero work.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
\newline
- Step 2
q = -145
- Step 3
w = -P V = -(101.3)(2.50) = -0.253
Correctw = -P_{} V = -P_{}(0) = 0
Because the cylinder is rigid and the piston is fixed, the volume does not change (). You substituted the total volume instead of the change in volume .
- Step 4
U = q + w = -145 - 0.253 = -145.253
CorrectU = q + w = -145 + 0 = -145
You correctly applied the First Law of Thermodynamics (), but the numerical value was affected by the non-zero work calculation in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly distinguished the thermodynamic system from its surroundings.
You assigned the correct negative sign to the heat released by the system.
You correctly recalled and set up the First Law equation .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the given cylinder volume () as the change in volume () when calculating pressure-volume work, overlooking that a fixed piston in a rigid container cannot undergo any volume change ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Rigid Boundary Condition
Pressure-volume work is defined as . If a container is rigid or has a fixed piston, , so .
Always check whether boundaries move before calculating work; if volume is constant, work is automatically zero regardless of the total volume.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that the container is rigid with a fixed piston, so the change in volume is .
Substitute into the work equation: .
Apply the First Law of Thermodynamics: .
(a) System: reacting chemical mixture inside the cylinder; Surroundings: cylinder walls, fixed piston, and water bath. (b) , , and .
03 The student swaps the definitions of system and surroundings, treating the surrounding water bath as the system.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
System: The water bath surrounding the cylinder. ⟹ Surroundings: The reaction mixture inside the cylinder.
CorrectSystem: the reacting chemical mixture inside the cylinder; Surroundings: the cylinder walls, the piston, and the external water bath.
You defined the external water bath as the system and the reaction mixture as the surroundings. The thermodynamic system is the specific substance or process being studied—here, the chemical reaction inside the cylinder. Everything else interacting with it, including the cylinder walls and water bath, forms the surroundings.
- Step 2
Water bath absorbs heat, so
CorrectThermodynamic state functions and energy transfers must be evaluated from the perspective of the system (the reaction mixture). Because the mixture releases of heat to the surroundings, energy leaves the system, so must be negative: .
- Step 3
Volume of bath does not change, so
- Step 4Correct
You applied the First Law of Thermodynamics () correctly, but the resulting sign was positive because it propagated the incorrect sign of from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that a constant-volume process results in zero expansion work ().
You correctly stated and applied the First Law of Thermodynamics relation .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the object of study (the reacting chemicals) with the measurement medium (the surrounding water bath), assigning the sign of heat from the receiver's viewpoint rather than the system's viewpoint.
REASONING PATH
Your ACEpath teacher’s suggested approach- System Identification
The system is the reaction mixture itself; containers, solvents acting as heat sinks, and water baths are part of the surroundings.
Always anchor your vantage point inside the reaction vessel as the system before assigning signs to and .
- Thermodynamic Sign Convention
Energy entering the system is positive (, endothermic / work done on system); energy leaving the system is negative (, exothermic / work done by system).
Check whether the system gained or lost energy: 'releases thermal energy' means .
CORRECTED PATH
ACEpath Teacher's DemonstrationDefine the reacting chemical mixture inside the cylinder as the system.
Define the cylinder walls, piston, and external water bath as the surroundings.
Express heat from the system's perspective: releasing gives .
Confirm work is zero because the rigid cylinder maintains constant volume (), so .
Sum the quantities via the First Law: .
(a) System: the reacting chemical mixture inside the cylinder; Surroundings: the cylinder walls, the piston, and the external water bath. (b) , , and .
Lock it in
What algebraic sign does heat () take when a system releases thermal energy to its surroundings?
Negative (). In chemistry, signs always reflect the system's balance sheet: energy leaving the system decreases its energy.
Similar question
A sample of gas in a flexible balloon absorbs of heat from the surroundings while expanding against atmospheric pressure, performing of work on the surroundings. Calculate , , and for the gas.
Answer
, , and . Heat absorbed by the gas is positive (); work done by the gas in expanding is negative (). By the First Law, .
An ideal gas is compressed in an insulated cylinder () by an external force that does of work on the gas. (a) What are the values of , , and ? (b) Does the internal energy of the gas increase or decrease?
Answer
(a) , , and . (b) The internal energy increases by . Because the surroundings do work on the system, energy is added to the system ().
During a constant-volume combustion in a bomb calorimeter, a chemical reaction mixture releases of heat. The calorimeter water temperature rises as a result. Determine , , , and state whether is positive or negative.
Answer
, (constant volume means ), and . Since energy lost by the system is gained by the surroundings, (positive).