Resources

An industrial engineer calculates the thermal efficiency of steam methane reforming: CH4(g)+H2O(g)→CO(g)+3 H2(g)\text{CH}_4(g) + \text{H}_2\text{O}(g) \rightarrow \text{CO}(g) + 3\,\text{H}_2(g) (ΔHrxn∘=+206.1 kJ/mol\Delta H_{\text{rxn}}^\circ = +206.1\,\text{kJ/mol}). The endothermic process requires heat supplied by an external natural gas combustion burner: CH4(g)+2 O2(g)→CO2(g)+2 H2O(g)\text{CH}_4(g) + 2\,\text{O}_2(g) \rightarrow \text{CO}_2(g) + 2\,\text{H}_2\text{O}(g) (ΔHcomb∘=−802.3 kJ/mol\Delta H_{\text{comb}}^\circ = -802.3\,\text{kJ/mol}). To produce 3.00×103 mol3.00 \times 10^3\,\text{mol} of H2\text{H}_2 gas, a technician incorrectly calculates the required fuel by using the molar ratio without accounting for sign conventions and furnace heat transfer losses, resulting in thermal deficits. Assuming the furnace operates with a thermal heat-transfer efficiency of 72.0%72.0\% (meaning only 72.0%72.0\% of the combustion heat enthalpy is transferred to the reforming tube reactors), calculate: (a) the theoretical net enthalpy change ΔH1\Delta H_1 required by the reforming reaction to produce this quantity of H2\text{H}_2, and (b) the actual mass of methane fuel (in kg\text{kg}, molar mass 16.04 g/mol16.04\,\text{g/mol}) that must be burned in the external burner to supply this thermal duty.

Answer and steps

Final answer

(a) ΔH1=+2.06×105 kJ\Delta H_1 = +2.06 \times 10^5\,\text{kJ} (endothermic); (b) Mass of fuel methane burned=5.73 kg\text{Mass of fuel methane burned} = 5.73\,\text{kg}.

Steps

01

Calculate the theoretical enthalpy change (ΔH1\Delta H_1) for the reforming reaction

The steam methane reforming (SMR) reaction is: CHX4(g)+HX2O(g)→CO(g)+3 HX2(g)(ΔHrxn∘=+206.1 kJ/mol)\ce{CH4(g) + H2O(g) -> CO(g) + 3 H2(g)} \quad (\Delta H_{\text{rxn}}^\circ = +206.1\text{ kJ/mol})

This thermochemical equation states that producing 3 mol3\text{ mol} of HX2\ce{H2} requires an input of +206.1 kJ+206.1\text{ kJ} of thermal energy.

Calculate the number of reaction turnovers (nrxnn_{\text{rxn}}) needed to produce 3.00×103 mol3.00 \times 10^3\text{ mol} of HX2\ce{H2}: nrxn=nHX23=3.00×103 mol3=1.00×103 moln_{\text{rxn}} = \frac{n_{\ce{H2}}}{3} = \frac{3.00 \times 10^3\text{ mol}}{3} = 1.00 \times 10^3\text{ mol}

The net theoretical heat absorbed by the reforming tubes is: ΔH1=nrxn⋅ΔHrxn∘=(1.00×103 mol)⋅(+206.1 kJ/mol)=+2.061×105 kJ\Delta H_1 = n_{\text{rxn}} \cdot \Delta H_{\text{rxn}}^\circ = (1.00 \times 10^3\text{ mol}) \cdot (+206.1\text{ kJ/mol}) = +2.061 \times 10^5\text{ kJ}

Rounded to three significant figures: ΔH1=+2.06×105 kJ\Delta H_1 = +2.06 \times 10^5\text{ kJ}

The positive sign indicates that the process is endothermic and requires thermal energy input.


02

Determine the total combustion heat required from the furnace

The combustion of fuel methane in the external burner releases heat: CHX4(g)+2 OX2(g)→COX2(g)+2 HX2O(g)(ΔHcomb∘=−802.3 kJ/mol)\ce{CH4(g) + 2 O2(g) -> CO2(g) + 2 H2O(g)} \quad (\Delta H_{\text{comb}}^\circ = -802.3\text{ kJ/mol})

Each mole of burned methane releases ∣ΔHcomb∘∣=802.3 kJ| \Delta H_{\text{comb}}^\circ | = 802.3\text{ kJ} of heat. Because the furnace operates at a heat-transfer efficiency of η=72.0%=0.720\eta = 72.0\% = 0.720, only a fraction of this combustion energy reaches the reforming reactor: qdelivered per mol=η⋅∣ΔHcomb∘∣=0.720⋅802.3 kJ/mol≈577.66 kJ/molq_{\text{delivered per mol}} = \eta \cdot |\Delta H_{\text{comb}}^\circ| = 0.720 \cdot 802.3\text{ kJ/mol} \approx 577.66\text{ kJ/mol}

The total combustion heat that must be released (qcombq_{\text{comb}}) to satisfy the heat demand qin=ΔH1=2.061×105 kJq_{\text{in}} = \Delta H_1 = 2.061 \times 10^5\text{ kJ} is: qcomb=ΔH1η=2.061×105 kJ0.720≈2.8625×105 kJq_{\text{comb}} = \frac{\Delta H_1}{\eta} = \frac{2.061 \times 10^5\text{ kJ}}{0.720} \approx 2.8625 \times 10^5\text{ kJ}


03

Calculate the mass of fuel methane required

Determine the moles of methane fuel (nfueln_{\text{fuel}}) that must be combusted: nfuel=qcomb∣ΔHcomb∘∣=2.8625×105 kJ802.3 kJ/mol≈356.8 moln_{\text{fuel}} = \frac{q_{\text{comb}}}{|\Delta H_{\text{comb}}^\circ|} = \frac{2.8625 \times 10^5\text{ kJ}}{802.3\text{ kJ/mol}} \approx 356.8\text{ mol}

Using the molar mass of methane (M=16.04 g/molM = 16.04\text{ g/mol}), find the mass in kilograms: mfuel=nfuel⋅M1000 g/kg=356.8 mol⋅16.04 g/mol1000 g/kg≈5.73 kgm_{\text{fuel}} = \frac{n_{\text{fuel}} \cdot M}{1000\text{ g/kg}} = \frac{356.8\text{ mol} \cdot 16.04\text{ g/mol}}{1000\text{ g/kg}} \approx 5.73\text{ kg}

Common Pitfall: Do not confuse feedstock methane (the reactant inside the tubes converted into HX2\ce{H2}) with fuel methane (burned externally to supply heat). In industrial steam reforming, methane serves both dual roles. Furthermore, dividing by the efficiency η\eta is necessary because heat losses mean more fuel must be burned than theoretically needed.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to divide the moles of H₂ by the stoichiometric coefficient of 3 from the reforming reaction, calculating ΔH₁ using 3.00 × 10³ mol of reaction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    nrxn=3.00×103 mol  ⟹  ΔH1=3.00×103 mol×206.1 kJ/mol=6.183×105 kJn_{\text{rxn}} = 3.00 \times 10^3\,\text{mol} \implies \Delta H_1 = 3.00 \times 10^3\,\text{mol} \times 206.1\,\text{kJ/mol} = 6.183 \times 10^5\,\text{kJ}

    Correct

    nrxn=3.00×103 mol3=1.00×103 mol  ⟹  ΔH1=1.00×103 mol×206.1 kJ/mol=+2.06×105 kJn_{\text{rxn}} = \frac{3.00 \times 10^3\,\text{mol}}{3} = 1.00 \times 10^3\,\text{mol} \implies \Delta H_1 = 1.00 \times 10^3\,\text{mol} \times 206.1\,\text{kJ/mol} = +2.06 \times 10^5\,\text{kJ}

    In the balanced steam reforming equation, 1 mol1\,\text{mol} of reaction yields 3 mol3\,\text{mol} of H2\text{H}_2. Therefore, producing 3.00×103 mol3.00 \times 10^3\,\text{mol} of H2\text{H}_2 corresponds to nrxn=3.00×103 mol3=1.00×103 moln_{\text{rxn}} = \frac{3.00 \times 10^3\,\text{mol}}{3} = 1.00 \times 10^3\,\text{mol}.

  2. Step 2

    qusable=802.3 kJ/mol×0.720=577.66 kJ/molq_{\text{usable}} = 802.3\,\text{kJ/mol} \times 0.720 = 577.66\,\text{kJ/mol}

  3. Step 3

    nfuel=6.183×105 kJ577.66 kJ/mol=1070.35 mol  ⟹  m=1070.35 mol×16.04 g/mol=17168 g=17.2 kgn_{\text{fuel}} = \frac{6.183 \times 10^5\,\text{kJ}}{577.66\,\text{kJ/mol}} = 1070.35\,\text{mol} \implies m = 1070.35\,\text{mol} \times 16.04\,\text{g/mol} = 17168\,\text{g} = 17.2\,\text{kg}

    Correct

    nfuel=2.061×105 kJ577.66 kJ/mol≈356.8 mol  ⟹  m=356.8 mol×16.04 g/mol1000 g/kg=5.73 kgn_{\text{fuel}} = \frac{2.061 \times 10^5\,\text{kJ}}{577.66\,\text{kJ/mol}} \approx 356.8\,\text{mol} \implies m = \frac{356.8\,\text{mol} \times 16.04\,\text{g/mol}}{1000\,\text{g/kg}} = 5.73\,\text{kg}

    Your division and molar mass conversion were carried out correctly, but your final mass is three times too large because of the carried-over value of ΔH1\Delta H_1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the 72.0%72.0\% thermal efficiency to find the usable heat delivered per mole of fuel.

You set up the relationship between required thermal energy, moles of fuel, and molar mass correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric coefficient omission in reaction turnover

You set the number of reaction turnovers equal to the moles of hydrogen instead of dividing by the coefficient of 3.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the moles of a specific product with the number of moles of reaction turnover (moles of reaction) when using a standard enthalpy of reaction defined per mole of reaction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molar Reaction Turnover
  • For a reaction with standard enthalpy ΔHrxn∘\Delta H_{\text{rxn}}^\circ, the total heat absorbed or released is q=nrxn⋅ΔHrxn∘q = n_{\text{rxn}} \cdot \Delta H_{\text{rxn}}^\circ, where nrxn=niνin_{\text{rxn}} = \frac{n_i}{\nu_i}.

  • Always divide the target substance's moles by its stoichiometric coefficient ν\nu before multiplying by ΔHrxn∘\Delta H_{\text{rxn}}^\circ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the moles of H2\text{H}_2 by its coefficient: nrxn=3.00×103 mol3=1.00×103 moln_{\text{rxn}} = \frac{3.00 \times 10^3\,\text{mol}}{3} = 1.00 \times 10^3\,\text{mol}.

  2. Calculate the theoretical heat requirement: ΔH1=(1.00×103 mol)(+206.1 kJ/mol)=+2.06×105 kJ\Delta H_1 = (1.00 \times 10^3\,\text{mol})(+206.1\,\text{kJ/mol}) = +2.06 \times 10^5\,\text{kJ}.

  3. Calculate the required fuel moles using the usable heat: nfuel=2.061×105 kJ577.66 kJ/mol≈356.8 moln_{\text{fuel}} = \frac{2.061 \times 10^5\,\text{kJ}}{577.66\,\text{kJ/mol}} \approx 356.8\,\text{mol}.

  4. Convert to kilograms of methane: mfuel=356.8 mol×16.04 g/mol1000 g/kg≈5.73 kgm_{\text{fuel}} = \frac{356.8\,\text{mol} \times 16.04\,\text{g/mol}}{1000\,\text{g/kg}} \approx 5.73\,\text{kg}.

Final answer

(a) ΔH1=+2.06×105 kJ\Delta H_1 = +2.06 \times 10^5\,\text{kJ}; (b) Mass of fuel methane=5.73 kg\text{Mass of fuel methane} = 5.73\,\text{kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the conversion factor explicitly as 1 mol rxn3 mol  H2\frac{1\,\text{mol rxn}}{3\,\text{mol}\;\text{H}_2} to ensure coefficients are not overlooked.

  • Practice identifying the difference between reaction enthalpy per mole of reaction versus enthalpy per mole of a particular species.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies by the 72.0% efficiency instead of dividing by it when calculating the required combustion duty.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    nrxn=3.00×103 mol3=1.00×103 mol  ⟹  ΔH1=1.00×103 mol×206.1 kJ/mol=2.061×105 kJn_{\text{rxn}} = \frac{3.00 \times 10^3\,\text{mol}}{3} = 1.00 \times 10^3\,\text{mol} \implies \Delta H_1 = 1.00 \times 10^3\,\text{mol} \times 206.1\,\text{kJ/mol} = 2.061 \times 10^5\,\text{kJ}

  2. Step 2

    qcomb=2.061×105 kJ×0.720=1.4839×105 kJq_{\text{comb}} = 2.061 \times 10^5\,\text{kJ} \times 0.720 = 1.4839 \times 10^5\,\text{kJ}

    Correct

    qcomb=ΔH1η=2.061×105 kJ0.720=2.8625×105 kJq_{\text{comb}} = \frac{\Delta H_1}{\eta} = \frac{2.061 \times 10^5\,\text{kJ}}{0.720} = 2.8625 \times 10^5\,\text{kJ}

    You multiplied by the efficiency of 72.0%72.0\% rather than dividing by it. Because only 72.0%72.0\% of the combustion heat is successfully transferred to the reactor, the burner must generate more heat than the reactor absorbs (qcomb>ΔH1q_{\text{comb}} > \Delta H_1).

  3. Step 3

    nfuel=1.4839×105 kJ802.3 kJ/mol=184.96 mol  ⟹  m=184.96 mol×16.04 g/mol=2967 g=2.97 kgn_{\text{fuel}} = \frac{1.4839 \times 10^5\,\text{kJ}}{802.3\,\text{kJ/mol}} = 184.96\,\text{mol} \implies m = 184.96\,\text{mol} \times 16.04\,\text{g/mol} = 2967\,\text{g} = 2.97\,\text{kg}

    Correct

    nfuel=2.8625×105 kJ802.3 kJ/mol≈356.8 mol  ⟹  m=356.8 mol×16.04 g/mol1000 g/kg≈5.73 kgn_{\text{fuel}} = \frac{2.8625 \times 10^5\,\text{kJ}}{802.3\,\text{kJ/mol}} \approx 356.8\,\text{mol} \implies m = \frac{356.8\,\text{mol} \times 16.04\,\text{g/mol}}{1000\,\text{g/kg}} \approx 5.73\,\text{kg}

    Your molar combustion and mass conversion steps were mathematically sound, but the final numerical value was affected by the earlier efficiency calculation error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the stoichiometric coefficient of 33 for HX2\ce{H2} to calculate reaction turnovers.

You calculated the net theoretical heat requirement ΔH1\Delta H_1 accurately.

You properly applied the molar heat of combustion and molar mass of methane to find fuel mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted efficiency multiplier

You set qcomb=ΔH1×ηq_{\text{comb}} = \Delta H_1 \times \eta instead of qcomb=ΔH1ηq_{\text{comb}} = \frac{\Delta H_1}{\eta}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of thermal efficiency: when heat is lost to the surroundings, the gross heat that must be released by fuel combustion is always larger than the net heat transferred to the reactor.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy balance with losses
  • η=qusefulqtotal input=qdeliveredqcomb\eta = \frac{q_{\text{useful}}}{q_{\text{total input}}} = \frac{q_{\text{delivered}}}{q_{\text{comb}}}, where η≤1\eta \le 1.

  • Always verify that qinput≥qusefulq_{\text{input}} \ge q_{\text{useful}} when dealing with an imperfect heating system.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total combustion heat needed: qcomb=2.061×105 kJ0.720=2.8625×105 kJq_{\text{comb}} = \frac{2.061 \times 10^5\,\text{kJ}}{0.720} = 2.8625 \times 10^5\,\text{kJ}.

  2. Find the moles of methane fuel: nfuel=2.8625×105 kJ802.3 kJ/mol=356.8 moln_{\text{fuel}} = \frac{2.8625 \times 10^5\,\text{kJ}}{802.3\,\text{kJ/mol}} = 356.8\,\text{mol}.

  3. Convert to kilograms: mfuel=356.8 mol×16.04 g/mol1000 g/kg=5.73 kgm_{\text{fuel}} = \frac{356.8\,\text{mol} \times 16.04\,\text{g/mol}}{1000\,\text{g/kg}} = 5.73\,\text{kg}.

Final answer

(a) ΔH1=+2.06×105 kJ\Delta H_1 = +2.06 \times 10^5\,\text{kJ}; (b) Mass of fuel methane =5.73 kg= 5.73\,\text{kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a physical reality check on efficiency: whenever efficiency is less than 100%100\%, fuel input must exceed process demand.

  • Label quantities clearly as qdeliveredq_{\text{delivered}} and qgeneratedq_{\text{generated}} before substituting into equations.

OverviewACEpath Teacher's Diagnosis

03 The student ignores the 72.0% heat-transfer efficiency entirely, assuming 100% heat transfer from the burner.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    nrxn=3.00×103 mol3=1.00×103 mol  ⟹  ΔH1=1.00×103 mol×206.1 kJ/mol=2.061×105 kJn_{\text{rxn}} = \frac{3.00 \times 10^3\,\text{mol}}{3} = 1.00 \times 10^3\,\text{mol} \implies \Delta H_1 = 1.00 \times 10^3\,\text{mol} \times 206.1\,\text{kJ/mol} = 2.061 \times 10^5\,\text{kJ}

  2. Step 2

    nfuel=2.061×105 kJ802.3 kJ/mol=256.89 moln_{\text{fuel}} = \frac{2.061 \times 10^5\,\text{kJ}}{802.3\,\text{kJ/mol}} = 256.89\,\text{mol}

    Correct

    nfuel=ΔH1η⋅∣ΔHcomb∘∣=2.061×105 kJ0.720×802.3 kJ/mol≈356.8 moln_{\text{fuel}} = \frac{\Delta H_1}{\eta \cdot |\Delta H_{\text{comb}}^\circ|} = \frac{2.061 \times 10^5\,\text{kJ}}{0.720 \times 802.3\,\text{kJ/mol}} \approx 356.8\,\text{mol}

    You divided the thermal requirement directly by the combustion enthalpy without accounting for the furnace heat-transfer efficiency of 72.0%72.0\%. Because only 72.0%72.0\% of the combustion heat is delivered to the reactor tubes, each mole of fuel methane delivers only 0.720×802.3 kJ≈577.7 kJ0.720 \times 802.3\,\text{kJ} \approx 577.7\,\text{kJ}.

  3. Step 3

    m=256.89 mol×16.04 g/mol=4120.5 g=4.12 kgm = 256.89\,\text{mol} \times 16.04\,\text{g/mol} = 4120.5\,\text{g} = 4.12\,\text{kg}

    Correct

    mfuel=356.8 mol×16.04 g/mol1000 g/kg≈5.73 kgm_{\text{fuel}} = \frac{356.8\,\text{mol} \times 16.04\,\text{g/mol}}{1000\,\text{g/kg}} \approx 5.73\,\text{kg}

    Your conversion from moles to mass using the molar mass was algebraically correct, but the numerical result is lower than expected due to the omitted efficiency in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the stoichiometric ratio from the balanced reforming equation to determine the reaction turnovers.

You accurately multiplied the reaction turnovers by ΔHrxn∘\Delta H_{\text{rxn}}^\circ to find the net enthalpy duty ΔH1\Delta H_1.

You correctly applied the molar mass of methane to convert moles of fuel into kilograms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Heat-Transfer Efficiency

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the furnace as a 100% efficient heat exchanger by setting the heat absorbed by the reactor equal to the total combustion heat released, neglecting the heat loss described by the 72.0% thermal efficiency.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermal Efficiency in Industrial Heating
  • η=qabsorbedqcombustion=ΔHdutynfuel⋅∣ΔHcomb∘∣\eta = \frac{q_{\text{absorbed}}}{q_{\text{combustion}}} = \frac{\Delta H_{\text{duty}}}{n_{\text{fuel}} \cdot |\Delta H_{\text{comb}}^\circ|}

  • Whenever a furnace or heat exchanger has an efficiency η<1\eta < 1, divide the required heat duty by η\eta to find the total combustion heat that must be released before calculating fuel amounts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total heat that must be generated by combustion: qcomb=ΔH1η=2.061×105 kJ0.720≈2.8625×105 kJq_{\text{comb}} = \frac{\Delta H_1}{\eta} = \frac{2.061 \times 10^5\,\text{kJ}}{0.720} \approx 2.8625 \times 10^5\,\text{kJ}.

  2. Calculate the moles of methane fuel required: nfuel=2.8625×105 kJ802.3 kJ/mol≈356.8 moln_{\text{fuel}} = \frac{2.8625 \times 10^5\,\text{kJ}}{802.3\,\text{kJ/mol}} \approx 356.8\,\text{mol}.

  3. Calculate the required mass of methane fuel: m=356.8 mol×16.04 g/mol1000 g/kg≈5.73 kgm = \frac{356.8\,\text{mol} \times 16.04\,\text{g/mol}}{1000\,\text{g/kg}} \approx 5.73\,\text{kg}.

Final answer

(a) ΔH1=+2.06×105 kJ\Delta H_1 = +2.06 \times 10^5\,\text{kJ}; (b) Mass of fuel methane=5.73 kg\text{Mass of fuel methane} = 5.73\,\text{kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how heat-transfer efficiency relates energy demanded by an endothermic reaction to energy supplied by a burner.

  • Practice identifying whether efficiency scales heat up or down: since losses always occur, the energy supplied by the fuel must always exceed the reaction's energy requirement.

Lock it in

Similar question

01

The Haber-Bosch synthesis is N2(g)+3 H2(g)→2 NH3(g)\text{N}_2(g) + 3\,\text{H}_2(g) \rightarrow 2\,\text{NH}_3(g) with ΔHrxn∘=−92.2 kJ/mol\Delta H_{\text{rxn}}^\circ = -92.2\,\text{kJ/mol}. Calculate the heat released (in kJ\text{kJ}) when 1.50×103 mol1.50 \times 10^3\,\text{mol} of H2\text{H}_2 reacts completely.

Answer

q=−4.61×104 kJq = -4.61 \times 10^4\,\text{kJ} (releases 4.61×104 kJ4.61 \times 10^4\,\text{kJ}). First find reaction turnovers: nrxn=1.50×103 mol  H23=5.00×102 moln_{\text{rxn}} = \frac{1.50 \times 10^3\,\text{mol}\;\text{H}_2}{3} = 5.00 \times 10^2\,\text{mol}. Then q=(5.00×102 mol)(−92.2 kJ/mol)=−4.61×104 kJq = (5.00 \times 10^2\,\text{mol})(-92.2\,\text{kJ/mol}) = -4.61 \times 10^4\,\text{kJ}.

02

Thermal decomposition of limestone is CaCO3(s)→CaO(s)+CO2(g)\text{CaCO}_3(s) \rightarrow \text{CaO}(s) + \text{CO}_2(g) with ΔHrxn∘=+178.3 kJ/mol\Delta H_{\text{rxn}}^\circ = +178.3\,\text{kJ/mol}. A calcination kiln runs at 65.0%65.0\% thermal efficiency and burns natural gas yielding 800 kJ800\,\text{kJ} of usable heat per mole of fuel. How many moles of fuel methane are needed to produce 500 mol500\,\text{mol} of CaO\text{CaO}?

Answer

nfuel=171 moln_{\text{fuel}} = 171\,\text{mol}. Heat required by reaction: qrxn=500 mol×178.3 kJ/mol=8.915×104 kJq_{\text{rxn}} = 500\,\text{mol} \times 178.3\,\text{kJ/mol} = 8.915 \times 10^4\,\text{kJ}. Usable heat per mole of fuel: qusable=800 kJ/mol×0.650=520 kJ/molq_{\text{usable}} = 800\,\text{kJ/mol} \times 0.650 = 520\,\text{kJ/mol}. Moles of fuel: nfuel=8.915×104 kJ520 kJ/mol≈171 moln_{\text{fuel}} = \frac{8.915 \times 10^4\,\text{kJ}}{520\,\text{kJ/mol}} \approx 171\,\text{mol}.

03

Dry reforming of methane is CH4(g)+CO2(g)→2 CO(g)+2 H2(g)\text{CH}_4(g) + \text{CO}_2(g) \rightarrow 2\,\text{CO}(g) + 2\,\text{H}_2(g) with ΔHrxn∘=+247.3 kJ/mol\Delta H_{\text{rxn}}^\circ = +247.3\,\text{kJ/mol}. To produce 1.20×104 mol1.20 \times 10^4\,\text{mol} of synthesis gas (total moles of CO+H2\text{CO} + \text{H}_2), external combustion of propane (C3H8\text{C}_3\text{H}_8, ΔHcomb∘=−2220 kJ/mol\Delta H_{\text{comb}}^\circ = -2220\,\text{kJ/mol}) is used with a furnace efficiency of 75.0%75.0\%. Calculate the mass of propane (molar mass 44.10 g/mol44.10\,\text{g/mol}) required in kg\text{kg}.

Answer

mpropane=19.6 kgm_{\text{propane}} = 19.6\,\text{kg}. In the balanced equation, 1 mol rxn1\,\text{mol rxn} produces 2+2=4 mol2 + 2 = 4\,\text{mol} of total syngas. Turnovers: nrxn=1.20×104 mol4=3.00×103 moln_{\text{rxn}} = \frac{1.20 \times 10^4\,\text{mol}}{4} = 3.00 \times 10^3\,\text{mol}. Theoretical heat: ΔH=(3.00×103 mol)(247.3 kJ/mol)=7.419×105 kJ\Delta H = (3.00 \times 10^3\,\text{mol})(247.3\,\text{kJ/mol}) = 7.419 \times 10^5\,\text{kJ}. Total combustion heat needed: qcomb=7.419×105 kJ0.750=9.892×105 kJq_{\text{comb}} = \frac{7.419 \times 10^5\,\text{kJ}}{0.750} = 9.892 \times 10^5\,\text{kJ}. Moles of propane: n=9.892×105 kJ2220 kJ/mol≈445.6 moln = \frac{9.892 \times 10^5\,\text{kJ}}{2220\,\text{kJ/mol}} \approx 445.6\,\text{mol}. Mass: m=445.6 mol×44.10 g/mol1000 g/kg≈19.6 kgm = \frac{445.6\,\text{mol} \times 44.10\,\text{g/mol}}{1000\,\text{g/kg}} \approx 19.6\,\text{kg}.

Loading workspace…