Resources

Dinitrogen tetroxide decomposes into nitrogen dioxide via the equilibrium N2O4(g)⇌2NO2(g)\text{N}_2\text{O}_4(g) \rightleftharpoons 2\text{NO}_2(g). In an experiment conducted in a 5.00 L5.00\text{ L} closed vessel at 100∘C100^\circ\text{C}, a sample of pure N2O4(g)\text{N}_2\text{O}_4(g) is introduced. Once dynamic equilibrium is attained, spectroscopic analysis reveals that the concentration of NO2(g)\text{NO}_2(g) is [NO2]=0.120 M[\text{NO}_2] = 0.120\text{ M}. Given that Kc=0.360K_c = 0.360 at this temperature, determine the initial amount in moles of pure N2O4(g)\text{N}_2\text{O}_4(g) originally introduced into the vessel.

Answer and steps

Final answer

0.500 mol0.500\text{ mol}

Steps

01

Write the Equilibrium Expression

For the reversible gas-phase reaction: NX2OX4(g)⇌2 NOX2(g)\ce{N2O4(g) <=> 2NO2(g)}

The equilibrium constant expression in terms of concentrations is: Kc=[NOX2]2[NX2OX4]K_c = \frac{[\ce{NO2}]^2}{[\ce{N2O4}]}

02

Determine the Equilibrium Concentration of NX2OX4\ce{N2O4}

Substitute the known values, Kc=0.360K_c = 0.360 and [NOX2]eq=0.120 M[\ce{NO2}]_{\text{eq}} = 0.120\text{ M}, into the expression: 0.360=(0.120)2[NX2OX4]eq0.360 = \frac{(0.120)^2}{[\ce{N2O4}]_{\text{eq}}}

[NX2OX4]eq=0.01440.360=0.0400 M[\ce{N2O4}]_{\text{eq}} = \frac{0.0144}{0.360} = 0.0400\text{ M}

03

Determine the Initial Concentration of NX2OX4\ce{N2O4}

Set up an ICE (Initial, Change, Equilibrium) relationship based on the stoichiometry of the reaction:

  • Initial: [NX2OX4]0=C0[\ce{N2O4}]_0 = C_0, [NOX2]0=0 M[\ce{NO2}]_0 = 0\text{ M}
  • Change: Since 1 mol1\text{ mol} of NX2OX4\ce{N2O4} decomposes to form 2 mol2\text{ mol} of NOX2\ce{NO2}, the change in [NOX2][\ce{NO2}] is +2x+2x and the change in [NX2OX4][\ce{N2O4}] is −x-x.

From the equilibrium concentration of NOX2\ce{NO2}: [NOX2]eq=2x=0.120 M  ⟹  x=0.0600 M[\ce{NO2}]_{\text{eq}} = 2x = 0.120\text{ M} \implies x = 0.0600\text{ M}

The amount of NX2OX4\ce{N2O4} consumed during the reaction is x=0.0600 Mx = 0.0600\text{ M}. Therefore, the initial concentration of NX2OX4\ce{N2O4} was: C0=[NX2OX4]eq+x=0.0400 M+0.0600 M=0.100 MC_0 = [\ce{N2O4}]_{\text{eq}} + x = 0.0400\text{ M} + 0.0600\text{ M} = 0.100\text{ M}

Common Pitfall: Forgetting the stoichiometric factor of 22 for NOX2\ce{NO2} leads to subtracting 0.120 M0.120\text{ M} instead of 0.0600 M0.0600\text{ M}, resulting in an incorrect initial concentration.

04

Calculate the Initial Moles of NX2OX4\ce{N2O4}

Using the definition of molarity (n=C⋅Vn = C \cdot V) and the vessel volume V=5.00 LV = 5.00\text{ L}: n0(NX2OX4)=0.100 M⋅5.00 L=0.500 moln_0(\ce{N2O4}) = 0.100\text{ M} \cdot 5.00\text{ L} = 0.500\text{ mol}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the NO2 concentration in the equilibrium constant expression, leading to an incorrect equilibrium concentration of N2O4 and an incorrect final initial amount of 1.97 mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Kc=[NO2][N2O4]  ⟹  [N2O4]eq=0.1200.360=0.333 MK_c = \frac{[\text{NO}_2]}{[\text{N}_2\text{O}_4]} \implies [\text{N}_2\text{O}_4]_{\text{eq}} = \frac{0.120}{0.360} = 0.333\text{ M}

    Correct

    Kc=[NO2]2[N2O4]  ⟹  [N2O4]eq=(0.120)20.360=0.0400 MK_c = \frac{[\text{NO}_2]^2}{[\text{N}_2\text{O}_4]} \implies [\text{N}_2\text{O}_4]_{\text{eq}} = \frac{(0.120)^2}{0.360} = 0.0400\text{ M}

    In the balanced equation N2O4(g)⇌2NO2(g)\text{N}_2\text{O}_4(g) \rightleftharpoons 2\text{NO}_2(g), the stoichiometric coefficient of NO2\text{NO}_2 is 22. In the equilibrium constant expression, each concentration must be raised to the power of its stoichiometric coefficient, so the numerator must be [NO2]2[\text{NO}_2]^2 rather than [NO2][\text{NO}_2].

  2. Step 2

    Δ[N2O4]=0.1202=0.060 M  ⟹  [N2O4]0=0.333+0.060=0.393 M\Delta[\text{N}_2\text{O}_4] = \frac{0.120}{2} = 0.060\text{ M} \implies [\text{N}_2\text{O}_4]_0 = 0.333 + 0.060 = 0.393\text{ M}

    Correct

    Δ[N2O4]=0.1202=0.0600 M  ⟹  [N2O4]0=0.0400+0.0600=0.100 M\Delta[\text{N}_2\text{O}_4] = \frac{0.120}{2} = 0.0600\text{ M} \implies [\text{N}_2\text{O}_4]_0 = 0.0400 + 0.0600 = 0.100\text{ M}

    Your stoichiometric reasoning is completely correct: producing 2 mol2\text{ mol} of NO2\text{NO}_2 consumes 1 mol1\text{ mol} of N2O4\text{N}_2\text{O}_4, so Δ[N2O4]=0.0600 M\Delta[\text{N}_2\text{O}_4] = 0.0600\text{ M}. However, adding this change to your incorrect equilibrium concentration from Step 1 gives an incorrect initial concentration.

  3. Step 3

    n0=0.393 M×5.00 L=1.97 moln_0 = 0.393\text{ M} \times 5.00\text{ L} = 1.97\text{ mol}

    Correct

    n0=0.100 M×5.00 L=0.500 moln_0 = 0.100\text{ M} \times 5.00\text{ L} = 0.500\text{ mol}

    You correctly applied the relationship n=C⋅Vn = C \cdot V, but the result is affected by the incorrect initial concentration calculated in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the decomposition ratio between N2O4\text{N}_2\text{O}_4 and NO2\text{NO}_2 is 1:21:2.

You correctly related the initial, equilibrium, and consumed concentrations of N2O4\text{N}_2\text{O}_4.

You correctly multiplied molar concentration by the vessel volume to find the amount in moles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted stoichiometric power in equilibrium constant expression

You wrote [NO2][\text{NO}_2] in the numerator of KcK_c instead of [NO2]2[\text{NO}_2]^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the law of mass action rule that raises each species concentration to an exponent equal to its stoichiometric coefficient in the balanced chemical equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Law of Mass Action Exponents
  • For a general reaction aA+bB⇌cC+dDa\text{A} + b\text{B} \rightleftharpoons c\text{C} + d\text{D}, the concentration equilibrium constant is Kc=[C]c[D]d[A]a[B]bK_c = \frac{[\text{C}]^c [\text{D}]^d}{[\text{A}]^a [\text{B}]^b}.

  • Before substituting numerical values, always write down the general expression for KcK_c and double-check every exponent against the coefficients in the balanced chemical equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute [NO2]=0.120 M[\text{NO}_2] = 0.120\text{ M} and Kc=0.360K_c = 0.360 into Kc=[NO2]2[N2O4]eqK_c = \frac{[\text{NO}_2]^2}{[\text{N}_2\text{O}_4]_{\text{eq}}}: [N2O4]eq=(0.120)20.360=0.0400 M[\text{N}_2\text{O}_4]_{\text{eq}} = \frac{(0.120)^2}{0.360} = 0.0400\text{ M}.

  2. Use the 1:21:2 mole ratio to find the consumed N2O4\text{N}_2\text{O}_4: Δ[N2O4]=12[NO2]eq=0.0600 M\Delta[\text{N}_2\text{O}_4] = \frac{1}{2}[\text{NO}_2]_{\text{eq}} = 0.0600\text{ M}.

  3. Add the consumed amount to the equilibrium concentration: [N2O4]0=0.0400 M+0.0600 M=0.100 M[\text{N}_2\text{O}_4]_0 = 0.0400\text{ M} + 0.0600\text{ M} = 0.100\text{ M}.

  4. Multiply by the volume of the vessel: n0=0.100 M×5.00 L=0.500 moln_0 = 0.100\text{ M} \times 5.00\text{ L} = 0.500\text{ mol}.

Final answer

0.500 mol0.500\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing equilibrium constant expressions for reactions with coefficients other than 1.

  • Always verify that the stoichiometric coefficients appear both as exponents in KcK_c and as multiplicative factors in your ICE table change row.

OverviewACEpath Teacher's Diagnosis

02 The student assumes a 1:1 mole ratio between N2O4 and NO2 instead of 1:2, calculating the consumed concentration of N2O4 as 0.120 M instead of 0.0600 M, resulting in an initial amount of 0.800 mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Kc=[NOX2]2[NX2OX4]  ⟹  0.360=(0.120)2[NX2OX4]eq  ⟹  [NX2OX4]eq=0.01440.360=0.040 MK_c = \frac{[\ce{NO2}]^2}{[\ce{N2O4}]} \implies 0.360 = \frac{(0.120)^2}{[\ce{N2O4}]_{\text{eq}}} \implies [\ce{N2O4}]_{\text{eq}} = \frac{0.0144}{0.360} = 0.040\text{ M}

  2. Step 2

    Δ[NX2OX4]=[NOX2]=0.120 M\Delta[\ce{N2O4}] = [\ce{NO2}] = 0.120\text{ M}

    Correct

    Δ[NX2OX4]=12[NOX2]eq=12(0.120 M)=0.0600 M\Delta[\ce{N2O4}] = \frac{1}{2}[\ce{NO2}]_{\text{eq}} = \frac{1}{2}(0.120\text{ M}) = 0.0600\text{ M}

    According to the balanced equation NX2OX4(g)⇌2 NOX2(g)\ce{N2O4(g) <=> 2NO2(g)}, decomposing 1 mol1\text{ mol} of NX2OX4\ce{N2O4} produces 2 mol2\text{ mol} of NOX2\ce{NO2}. Therefore, the concentration of NX2OX4\ce{N2O4} consumed is half of the equilibrium concentration of NOX2\ce{NO2}, which is 0.0600 M0.0600\text{ M}, not 0.120 M0.120\text{ M}.

  3. Step 3

    [NX2OX4]0=0.040+0.120=0.160 M[\ce{N2O4}]_0 = 0.040 + 0.120 = 0.160\text{ M}

    Correct

    [NX2OX4]0=[NX2OX4]eq+Δ[NX2OX4]=0.0400 M+0.0600 M=0.100 M[\ce{N2O4}]_0 = [\ce{N2O4}]_{\text{eq}} + \Delta[\ce{N2O4}] = 0.0400\text{ M} + 0.0600\text{ M} = 0.100\text{ M}

    Your method of adding the consumed amount to the equilibrium amount is conceptually correct, but this step carries forward the incorrect change value.

  4. Step 4

    n0=0.160 M×5.00 L=0.800 moln_0 = 0.160\text{ M} \times 5.00\text{ L} = 0.800\text{ mol}

    Correct

    n0=[NX2OX4]0×V=0.100 M×5.00 L=0.500 moln_0 = [\ce{N2O4}]_0 \times V = 0.100\text{ M} \times 5.00\text{ L} = 0.500\text{ mol}

    You correctly multiplied your molar concentration by the vessel volume, but the numerical answer is incorrect due to the earlier stoichiometric error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated and solved the equilibrium expression for [NX2OX4]eq[\ce{N2O4}]_{\text{eq}}.

You recognized that initial concentration equals equilibrium concentration plus consumed concentration.

You correctly applied the relationship n=C⋅Vn = C \cdot V to convert molarity to total moles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric coefficient omission in ICE change row

You equated Δ[NX2OX4]\Delta[\ce{N2O4}] directly to [NOX2][\ce{NO2}] instead of dividing by the stoichiometric coefficient of 22.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the mole-ratio relationship between reactants and products during the reaction change phase, treating the molar conversion between NX2OX4\ce{N2O4} and NOX2\ce{NO2} as 1:11:1 rather than 1:21:2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometry of the Change Row
  • For a reaction aA⇌bBa\ce{A} \rightleftharpoons b\ce{B}, the change in concentration satisfies ∣Δ[A]∣a=∣Δ[B]∣b\frac{|\Delta[\ce{A}]|}{a} = \frac{|\Delta[\ce{B}]|}{b}.

  • Always write out the explicit stoichiometric ratio when converting formed product into consumed reactant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. From the balanced equation NX2OX4(g)⇌2 NOX2(g)\ce{N2O4(g) <=> 2NO2(g)}, the stoichiometric ratio of NX2OX4\ce{N2O4} consumed to NOX2\ce{NO2} produced is 1:21:2.

  2. Calculate the consumed concentration: Δ[NX2OX4]=12[NOX2]eq=12(0.120 M)=0.0600 M\Delta[\ce{N2O4}] = \frac{1}{2}[\ce{NO2}]_{\text{eq}} = \frac{1}{2}(0.120\text{ M}) = 0.0600\text{ M}.

  3. Compute the initial concentration: [NX2OX4]0=[NX2OX4]eq+Δ[NX2OX4]=0.0400 M+0.0600 M=0.100 M[\ce{N2O4}]_0 = [\ce{N2O4}]_{\text{eq}} + \Delta[\ce{N2O4}] = 0.0400\text{ M} + 0.0600\text{ M} = 0.100\text{ M}.

  4. Calculate the initial moles in the 5.00 L5.00\text{ L} vessel: n0=0.100 M×5.00 L=0.500 moln_0 = 0.100\text{ M} \times 5.00\text{ L} = 0.500\text{ mol}.

Final answer

0.500 mol0.500\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Construct an ICE table explicitly whenever working through equilibrium problems to keep coefficients tied to the change row.

  • Verify that every value in the change row is proportional to its stoichiometric coefficient in the balanced chemical equation.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the initial concentration of N2O4 correctly but stops without multiplying by the volume of 5.00 L, reporting the molarity 0.100 mol as the initial amount.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Kc=[NOX2]2[NX2OX4]  ⟹  0.360=(0.120)2[NX2OX4]eq  ⟹  [NX2OX4]eq=0.01440.360=0.040 MK_c = \frac{[\ce{NO2}]^2}{[\ce{N2O4}]} \implies 0.360 = \frac{(0.120)^2}{[\ce{N2O4}]_{\text{eq}}} \implies [\ce{N2O4}]_{\text{eq}} = \frac{0.0144}{0.360} = 0.040\text{ M}

  2. Step 2

    Δ[NX2OX4]=0.1202=0.060 M  ⟹  [NX2OX4]0=0.040+0.060=0.100 M\Delta [\ce{N2O4}] = \frac{0.120}{2} = 0.060\text{ M} \implies [\ce{N2O4}]_0 = 0.040 + 0.060 = 0.100\text{ M}

  3. Step 3

    n0=0.100 moln_0 = 0.100\text{ mol}

    Correct

    n0=[NX2OX4]0×V=0.100 M×5.00 L=0.500 moln_0 = [\ce{N2O4}]_0 \times V = 0.100\text{ M} \times 5.00\text{ L} = 0.500\text{ mol}

    You equated the molar concentration directly to the amount in moles without multiplying by the vessel volume (V=5.00 LV = 5.00\text{ L}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formulated the equilibrium constant expression Kc=[NOX2]2[NX2OX4]K_c = \frac{[\ce{NO2}]^2}{[\ce{N2O4}]}.

You correctly used reaction stoichiometry to relate Δ[NX2OX4]\Delta[\ce{N2O4}] to [NOX2]eq[\ce{NO2}]_{\text{eq}}.

You correctly calculated the initial molar concentration [NX2OX4]0=0.100 M[\ce{N2O4}]_0 = 0.100\text{ M}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit / Volume Conversion Omission

You treated molar concentration (M=mol/L\text{M} = \text{mol/L}) as the total mole quantity, omitting multiplication by the container volume.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing concentration (C=n/VC = n/V) with total amount of substance (nn), which is common when working through multi-step equilibrium problems where all intermediate work is done in molarity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Converting Concentration to Moles
  • Molarity is defined as C=nVC = \frac{n}{V}, meaning n=C×Vn = C \times V.

  • Always check the target unit in the prompt: if the question asks for moles, multiply the calculated molarity by the container volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the container volume given in the problem statement: V=5.00 LV = 5.00\text{ L}.

  2. Apply the relation between moles, concentration, and volume: n0=[NX2OX4]0×Vn_0 = [\ce{N2O4}]_0 \times V.

  3. Calculate: n0=0.100 mol/L×5.00 L=0.500 moln_0 = 0.100\text{ mol/L} \times 5.00\text{ L} = 0.500\text{ mol}.

Final answer

0.500 mol0.500\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Underline whether the problem asks for equilibrium concentration (M\text{M}) or amount of substance (mol\text{mol}) before starting your calculations.

  • Keep explicit units (mol/L\text{mol/L} vs. mol\text{mol}) attached to each numerical value in your final step to prevent confusing concentration with total moles.

Lock it in

Similar question

01

For the reaction 2NO(g)+O2(g)⇌2NO2(g)2\text{NO}(g) + \text{O}_2(g) \rightleftharpoons 2\text{NO}_2(g), an equilibrium mixture in a 2.00 L2.00\text{ L} container at a given temperature contains 0.200 M NO0.200\text{ M } \text{NO} and 0.100 M O20.100\text{ M } \text{O}_2. If Kc=25.0K_c = 25.0, what is the equilibrium concentration of NO2(g)\text{NO}_2(g)?

Answer

0.316 M0.316\text{ M}. Key steps: Write Kc=[NO2]2[NO]2[O2]K_c = \frac{[\text{NO}_2]^2}{[\text{NO}]^2 [\text{O}_2]}. Substitute known values: 25.0=[NO2]2(0.200)2(0.100)=[NO2]20.0040025.0 = \frac{[\text{NO}_2]^2}{(0.200)^2 (0.100)} = \frac{[\text{NO}_2]^2}{0.00400}. Thus, [NO2]2=25.0×0.00400=0.100[\text{NO}_2]^2 = 25.0 \times 0.00400 = 0.100, giving [NO2]=0.100≈0.316 M[\text{NO}_2] = \sqrt{0.100} \approx 0.316\text{ M}.

02

Phosgene decomposes according to COCl2(g)⇌CO(g)+Cl2(g)\text{COCl}_2(g) \rightleftharpoons \text{CO}(g) + \text{Cl}_2(g). In a 10.0 L10.0\text{ L} vessel at equilibrium, [CO]=[Cl2]=0.050 M[\text{CO}] = [\text{Cl}_2] = 0.050\text{ M} and Kc=8.33×10−4K_c = 8.33 \times 10^{-4}. Determine the initial moles of COCl2(g)\text{COCl}_2(g) originally placed in the vessel if only pure phosgene was introduced.

Answer

3.5 mol3.5\text{ mol}. Key steps: Kc=[CO][Cl2][COCl2]  ⟹  [COCl2]eq=(0.050)28.33×10−4=3.00 MK_c = \frac{[\text{CO}][\text{Cl}_2]}{[\text{COCl}_2]} \implies [\text{COCl}_2]_{\text{eq}} = \frac{(0.050)^2}{8.33 \times 10^{-4}} = 3.00\text{ M}. By 1:11:1 stoichiometry, Δ[COCl2]=0.050 M\Delta[\text{COCl}_2] = 0.050\text{ M}, so [COCl2]0=3.00+0.050=3.05 M[\text{COCl}_2]_0 = 3.00 + 0.050 = 3.05\text{ M}. Initial moles n0=3.05 M×10.0 L≈30.5 moln_0 = 3.05\text{ M} \times 10.0\text{ L} \approx 30.5\text{ mol} (or 31 mol31\text{ mol}).

03

At 500 K500\text{ K}, hydrogen iodide decomposes via 2HI(g)⇌H2(g)+I2(g)2\text{HI}(g) \rightleftharpoons \text{H}_2(g) + \text{I}_2(g) with Kc=0.0160K_c = 0.0160. A sample of pure HI\text{HI} is introduced into a sealed 2.50 L2.50\text{ L} flask. At equilibrium, spectroscopic measurement shows [I2]=0.0400 M[\text{I}_2] = 0.0400\text{ M}. Calculate the initial amount in moles of pure HI(g)\text{HI}(g) added to the flask.

Answer

1.00 mol1.00\text{ mol}. Key steps: From 1:11:1 product stoichiometry, [H2]eq=[I2]eq=0.0400 M[\text{H}_2]_{\text{eq}} = [\text{I}_2]_{\text{eq}} = 0.0400\text{ M}. Set up Kc=[H2][I2][HI]2  ⟹  0.0160=(0.0400)2[HI]2  ⟹  [HI]eq=0.001600.0160=0.316 MK_c = \frac{[\text{H}_2][\text{I}_2]}{[\text{HI}]^2} \implies 0.0160 = \frac{(0.0400)^2}{[\text{HI}]^2} \implies [\text{HI}]_{\text{eq}} = \sqrt{\frac{0.00160}{0.0160}} = 0.316\text{ M}. By stoichiometry, consuming 2x=2(0.0400)=0.0800 M2x = 2(0.0400) = 0.0800\text{ M} of HI\text{HI} yields [HI]0=0.316+0.0800=0.396 M[\text{HI}]_0 = 0.316 + 0.0800 = 0.396\text{ M} (yielding n0=0.396 M×2.50 L=0.99 mol≈1.00 moln_0 = 0.396\text{ M} \times 2.50\text{ L} = 0.99\text{ mol} \approx 1.00\text{ mol}).

Loading workspace…