Resources
An electrolytic cell is employed to electroplate pure copper onto an iron key from an aqueous acidic solution of . A steady electrical current of is passed through the cell for an unknown duration. After electrolysis, the dry iron key displays a measured mass increase of exactly of elemental copper (molar mass of , Faraday's constant ). Working backward from this deposited mass, determine: (a) the total charge in coulombs passed through the cell, and (b) the required electrolysis duration in minutes.
Answer and steps
Final answer
(a) ; (b) .
Steps
Identify the electrode half-reaction
In an electrolytic cell, reduction occurs at the cathode (the negative electrode connected to the power source). The iron key serves as the cathode where aqueous copper(II) ions are reduced to solid copper:
This half-reaction shows that depositing of elemental copper () requires of electrons ().
Calculate the moles of copper deposited
Use the measured mass increase and the molar mass of copper:
Determine the total charge passed ()
From the stoichiometric ratio (), find the total moles of electrons transferred:
Using Faraday's constant (), compute the total electrical charge :
Expressed to three significant figures:
Common Pitfall: Forgetting that each ion requires two electrons leads to an answer that is half the actual charge and time. Always write the balanced reduction half-reaction first to verify the electron-to-metal mole ratio.
Calculate the required duration in minutes ()
Electric charge is related to constant electric current () by :
Convert the time from seconds to minutes:
Typical errors
01 The student forgets that Cu²⁺ requires 2 electrons per atom reduced, incorrectly assuming a 1:1 electron-to-copper mole ratio, halving the calculated charge and time.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In copper(II) sulfate (), copper is in the oxidation state as . Reducing each copper ion requires of electrons, so .
- Step 3Correct
You correctly applied the relationship , but the result was halved due to the earlier missing factor of 2 in .
- Step 4Correct
You correctly divided charge by current to find time in seconds and converted seconds to minutes, but the value inherited the error from the charge calculation.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the mass of copper to moles using its molar mass.
You correctly set up and applied Faraday's equation .
You correctly related current, charge, and time using and converted seconds to minutes.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeAssuming copper is in the oxidation state () in instead of ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou did not determine the oxidation state of the metal cation from the chemical formula . Because the sulfate polyatomic ion is , copper must be , which requires two electrons per atom of copper deposited.
REASONING PATH
Your ACEpath teacher’s suggested approach- Deduce the cation charge from the formula
In an ionic compound , the total positive charge must balance the known charge of the anion (e.g., means is ).
Always determine the exact cation charge before writing the cathode reduction half-reaction.
- Write the balanced half-reaction
, where is the number of moles of electrons transferred per mole of metal formed.
Check that both charge and atoms are balanced so you multiply moles of metal by when finding moles of electrons.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the correct cathode reduction half-reaction: .
Calculate the moles of electrons transferred: .
Compute the total charge: .
Calculate the time required: .
(a) ; (b)
02 The student correctly calculates the duration in seconds but forgets to divide by 60 to convert seconds to minutes.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
Because , the formula yields time in seconds. To express the duration in minutes, you must divide the value by , rather than simply changing the unit symbol.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the mole ratio between electrons and copper from the cathode reduction half-reaction.
You accurately calculated the total charge passed using Faraday's constant.
You correctly applied to find the electrolysis time in seconds.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou found the exact elapsed time of , but wrote down without performing the unit conversion.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the implicit base units of electrical formulas: current is measured in amperes (), which directly yields time in seconds when computing . Converting to minutes requires dividing by .
REASONING PATH
Your ACEpath teacher’s suggested approach- Fundamental SI Base Unit for Electric Current
, meaning any formula relating charge and current () strictly outputs time in seconds ().
Always write down the unit immediately after evaluating before converting to larger time units.
- Unit Conversion Verification
.
Check the prompt's requested unit (minutes vs. seconds) and write out the dimensional factor explicitly.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the dimensional analysis conversion from seconds to minutes: .
Evaluate the quotient: (to three significant figures).
(a) ; (b)
03 The student divides by the stoichiometric electron coefficient instead of multiplying, taking n(e⁻) = n(Cu) / 2 instead of 2 × n(Cu).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because reduction of copper(II) requires two electrons per atom (), each mole of copper requires of electrons. You should multiply the moles of copper by , not divide by .
- Step 3Correct
Your formula is correct, but this numerical value is four times too small due to the earlier division error.
- Step 4Correct
Your physics and unit conversions are completely sound, but the final duration inherits the error from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the amount of copper in moles from its mass and molar mass.
You used the correct equation with Faraday's constant.
You accurately related charge, constant current, and time, including converting seconds to minutes.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided by the stoichiometric coefficient of rather than multiplying when converting moles of copper into moles of electrons.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the stoichiometric mole ratio: writing correctly means , but setting it up without explicit units often leads to dividing by instead of multiplying.
REASONING PATH
Your ACEpath teacher’s suggested approach- Electrode Half-Reaction Stoichiometry
For a reduction , of metal requires of electrons.
Always write down the half-reaction and use dimensional analysis with units: .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the reduction half-reaction: .
Multiply moles of copper by : .
Compute the total charge: .
Calculate the duration in seconds: .
Convert to minutes: .
(a) ; (b)
Lock it in
How do you determine the moles of electrons needed per mole of metal deposited during electrolysis?
Find the oxidation state of the metal cation in the salt (e.g., for in ). The half-reaction shows that .
Similar question
A solution of is electrolyzed with a steady current of to plate silver onto a spoon. If of elemental silver is deposited (, ), find: (a) the total charge passed, and (b) the time in minutes.
Answer
(a) ; (b) . Silver is , so (). . . .
An aqueous solution of gold(III) chloride, , is electrolyzed using a constant current of for . What mass of solid gold () is electroplated onto the cathode?
Answer
. Total charge . Moles of electrons . Since gold is , reduction is , so . Deposited mass .
Two electrolytic cells are connected in series so the exact same electrical charge passes through both. Cell 1 contains aqueous , and Cell 2 contains an unknown metal salt . During the experiment, of copper () deposits in Cell 1, while of metal () deposits in Cell 2. Determine the oxidation state of metal in its salt.
Answer
. In Cell 1, . Since copper is , moles of electrons passed . In Cell 2, . The electron-to-metal ratio is . Thus, the oxidation state is .