Resources

A solution is prepared by mixing 200.0 mL200.0\text{ mL} of 2.50×10−3 M Pb(NO3)22.50 \times 10^{-3}\text{ M } \text{Pb(NO}_3)_2 with 300.0 mL300.0\text{ mL} of an unknown sodium iodide (NaI\text{NaI}) solution at 25∘C25^\circ\text{C}. The solubility product constant for lead(II) iodide is Ksp(PbI2)=9.8×10−9K_{sp}(\text{PbI}_2) = 9.8 \times 10^{-9}. Calculate the maximum initial molar concentration of the NaI\text{NaI} solution, [extNaI]0[ ext{NaI}]_0, that can be used such that the system remains at the impending threshold of precipitation without any visible PbI2(s)\text{PbI}_2(s) forming (i.e., Qsp=KspQ_{sp} = K_{sp}).

Answer and steps

Final answer

Net ionic precipitation equilibrium: Pb2+(aq)+2I−(aq)⇌PbI2(s)\text{Pb}^{2+}(aq) + 2\text{I}^-(aq) \rightleftharpoons \text{PbI}_2(s). Maximum threshold concentration: [extNaI]0=5.22×10−3 M[ ext{NaI}]_0 = 5.22 \times 10^{-3}\text{ M}.

Steps

01

Write the Dissolution Equilibrium and the KspK_{sp} Expression

When lead(II) ions (PbX2+\ce{Pb^{2+}}) and iodide ions (IX−\ce{I^-}) are mixed, the sparingly soluble salt lead(II) iodide (PbIX2\ce{PbI2}) can precipitate according to the equilibrium:

PbIX2(s)⇌PbX2+(aq)+2 IX−(aq)\ce{PbI2(s) <=> Pb^{2+}(aq) + 2I^-(aq)}

The solubility product expression is:

Ksp=[PbX2+][IX−]2K_{sp} = [\ce{Pb^{2+}}][\ce{I^-}]^2

Precipitation is at its impending threshold when the ion product quotient equals the solubility product constant:

Qsp=[PbX2+][IX−]2=Ksp=9.8×10−9Q_{sp} = [\ce{Pb^{2+}}][\ce{I^-}]^2 = K_{sp} = 9.8 \times 10^{-9}


02

Calculate the Diluted Concentration of PbX2+\ce{Pb^{2+}}

Because the two solutions are mixed, their volumes add together.

  • Volume of Pb(NOX3)X2\ce{Pb(NO3)2} solution: V1=200.0 mLV_1 = 200.0\text{ mL}
  • Volume of NaI\ce{NaI} solution: V2=300.0 mLV_2 = 300.0\text{ mL}
  • Total solution volume: Vtotal=200.0 mL+300.0 mL=500.0 mLV_{\text{total}} = 200.0\text{ mL} + 300.0\text{ mL} = 500.0\text{ mL}

Since Pb(NOX3)X2\ce{Pb(NO3)2} is a strong electrolyte that dissociates completely into one PbX2+\ce{Pb^{2+}} ion per formula unit, the concentration of PbX2+\ce{Pb^{2+}} immediately after mixing is:

[PbX2+]=C1V1Vtotal=(2.50×10−3 M)(200.0 mL)500.0 mL=1.00×10−3 M[\ce{Pb^{2+}}] = \frac{C_1 V_1}{V_{\text{total}}} = \frac{(2.50 \times 10^{-3}\text{ M})(200.0\text{ mL})}{500.0\text{ mL}} = 1.00 \times 10^{-3}\text{ M}


03

Determine the Maximum Allowable Concentration of IX−\ce{I^-} in the Mixture

Substitute [PbX2+][\ce{Pb^{2+}}] into the threshold condition Qsp=KspQ_{sp} = K_{sp}:

(1.00×10−3 M)[IX−]2=9.8×10−9(1.00 \times 10^{-3}\text{ M})[\ce{I^-}]^2 = 9.8 \times 10^{-9}

[IX−]2=9.8×10−91.00×10−3=9.8×10−6 M2[\ce{I^-}]^2 = \frac{9.8 \times 10^{-9}}{1.00 \times 10^{-3}} = 9.8 \times 10^{-6}\text{ M}^2

[IX−]=9.8×10−6 M2≈3.13×10−3 M[\ce{I^-}] = \sqrt{9.8 \times 10^{-6}\text{ M}^2} \approx 3.13 \times 10^{-3}\text{ M}


04

Calculate the Initial Concentration [NaI]0[\ce{NaI}]_0

Sodium iodide completely dissociates in water: NaI(aq)→NaX+(aq)+IX−(aq)\ce{NaI(aq) -> Na^+(aq) + I^-(aq)}, meaning [IX−]0=[NaI]0[\ce{I^-}]_0 = [\ce{NaI}]_0.

Accounting for dilution during mixing:

[IX−]=[NaI]0⋅V2Vtotal[\ce{I^-}] = \frac{[\ce{NaI}]_0 \cdot V_2}{V_{\text{total}}}

Substitute the known values and solve for [NaI]0[\ce{NaI}]_0:

3.13×10−3 M=[NaI]0⋅300.0 mL500.0 mL3.13 \times 10^{-3}\text{ M} = [\ce{NaI}]_0 \cdot \frac{300.0\text{ mL}}{500.0\text{ mL}}

[NaI]0=3.13×10−3 M⋅500.0300.0≈5.22×10−3 M[\ce{NaI}]_0 = 3.13 \times 10^{-3}\text{ M} \cdot \frac{500.0}{300.0} \approx 5.22 \times 10^{-3}\text{ M}

Common Pitfall: Forgetting that both solutions dilute each other upon mixing. Using the initial volume or neglecting to square [IX−][\ce{I^-}] in the KspK_{sp} expression leads to incorrect concentrations.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the iodide concentration in the K_sp expression, using K_sp = [Pb²⁺][I⁻] instead of [Pb²⁺][I⁻]².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Vtotal=200.0 mL+300.0 mL=500.0 mL  ⟹  [Pb2+]=(2.50×10−3 M)(200.0 mL)500.0 mL=1.00×10−3 MV_{\text{total}} = 200.0\text{ mL} + 300.0\text{ mL} = 500.0\text{ mL} \implies [\text{Pb}^{2+}] = \frac{(2.50 \times 10^{-3}\text{ M})(200.0\text{ mL})}{500.0\text{ mL}} = 1.00 \times 10^{-3}\text{ M}

  2. Step 2

    Ksp=[Pb2+][I−]=9.8×10−9  ⟹  [I−]=9.8×10−91.00×10−3=9.8×10−6 MK_{sp} = [\text{Pb}^{2+}][\text{I}^-] = 9.8 \times 10^{-9} \implies [\text{I}^-] = \frac{9.8 \times 10^{-9}}{1.00 \times 10^{-3}} = 9.8 \times 10^{-6}\text{ M}

    Correct

    Ksp=[Pb2+][I−]2=9.8×10−9  ⟹  [I−]=9.8×10−91.00×10−3≈3.13×10−3 MK_{sp} = [\text{Pb}^{2+}][\text{I}^-]^2 = 9.8 \times 10^{-9} \implies [\text{I}^-] = \sqrt{\frac{9.8 \times 10^{-9}}{1.00 \times 10^{-3}}} \approx 3.13 \times 10^{-3}\text{ M}

    The dissociation of PbI2(s)\text{PbI}_2(s) produces two iodide ions per formula unit (PbI2(s)⇌Pb2+(aq)+2I−(aq)\text{PbI}_2(s) \rightleftharpoons \text{Pb}^{2+}(aq) + 2\text{I}^-(aq)), so the iodide term must be squared: Ksp=[Pb2+][I−]2K_{sp} = [\text{Pb}^{2+}][\text{I}^-]^2.

  3. Step 3

    [NaI]0=(9.8×10−6 M)(500.0 mL)300.0 mL=1.63×10−5 M[\text{NaI}]_0 = \frac{(9.8 \times 10^{-6}\text{ M})(500.0\text{ mL})}{300.0\text{ mL}} = 1.63 \times 10^{-5}\text{ M}

    Correct

    [NaI]0=(3.13×10−3 M)(500.0 mL)300.0 mL≈5.22×10−3 M[\text{NaI}]_0 = \frac{(3.13 \times 10^{-3}\text{ M})(500.0\text{ mL})}{300.0\text{ mL}} \approx 5.22 \times 10^{-3}\text{ M}

    Your dilution calculation is mathematically sound, but the final value is incorrect because it carried forward the unsquared iodide concentration from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You accounted for the additive total volume upon mixing two solutions.

You calculated the diluted lead(II) ion concentration accurately.

You correctly related the diluted iodide ion concentration back to the initial sodium iodide concentration using the inverse dilution ratio.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing stoichiometric exponent in equilibrium expression

You set up the solubility product expression as Ksp=[Pb2+][I−]K_{sp} = [\text{Pb}^{2+}][\text{I}^-] without squaring the iodide concentration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the stoichiometric coefficient of the ions when converting a chemical dissolution equation into an equilibrium constant (KspK_{sp}) or reaction quotient (QspQ_{sp}) expression.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the Dissociation Equation First
  • For any generic salt MpXq(s)⇌pMn+(aq)+qXm−(aq)\text{M}_p\text{X}_q(s) \rightleftharpoons p\text{M}^{n+}(aq) + q\text{X}^{m-}(aq), the solubility product expression is Ksp=[Mn+]p[Xm−]qK_{sp} = [\text{M}^{n+}]^p [\text{X}^{m-}]^q.

  • Always write out the balanced dissociation equation and explicitly verify that each ion's coefficient becomes its exponent in the KspK_{sp} expression before substituting numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the correct threshold condition: Qsp=[Pb2+][I−]2=Ksp=9.8×10−9Q_{sp} = [\text{Pb}^{2+}][\text{I}^-]^2 = K_{sp} = 9.8 \times 10^{-9}.

  2. Substitute [Pb2+]=1.00×10−3 M[\text{Pb}^{2+}] = 1.00 \times 10^{-3}\text{ M} and solve for [I−][\text{I}^-]: [I−]2=9.8×10−91.00×10−3=9.8×10−6 M2  ⟹  [I−]=9.8×10−6≈3.13×10−3 M[\text{I}^-]^2 = \frac{9.8 \times 10^{-9}}{1.00 \times 10^{-3}} = 9.8 \times 10^{-6}\text{ M}^2 \implies [\text{I}^-] = \sqrt{9.8 \times 10^{-6}} \approx 3.13 \times 10^{-3}\text{ M}.

  3. Apply the dilution equation to find [NaI]0[\text{NaI}]_0: [NaI]0=[I−]×VtotalVNaI=3.13×10−3 M×500.0 mL300.0 mL≈5.22×10−3 M[\text{NaI}]_0 = [\text{I}^-] \times \frac{V_{\text{total}}}{V_{\text{NaI}}} = 3.13 \times 10^{-3}\text{ M} \times \frac{500.0\text{ mL}}{300.0\text{ mL}} \approx 5.22 \times 10^{-3}\text{ M}.

Final answer

[NaI]0=5.22×10−3 M[\text{NaI}]_0 = 5.22 \times 10^{-3}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing KspK_{sp} expressions for 1:21:2 and 1:31:3 ionic compounds like CaF2\text{CaF}_2, Ag2CrO4\text{Ag}_2\text{CrO}_4, and Fe(OH)3\text{Fe(OH)}_3 before solving numerical problems.

  • Double-check that whenever an ion carries a subscript in the chemical formula (like the 22 in PbI2\text{PbI}_2), that subscript appears as an exponent in KspK_{sp}.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the dilution factor for the NaI solution and reports the equilibrium mixture concentration of iodide as the initial concentration [NaI]₀.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Vtotal=200.0 mL+300.0 mL=500.0 mL  ⟹  [PbX2+]=(2.50×10−3 M)(200.0 mL)500.0 mL=1.00×10−3 MV_{\text{total}} = 200.0\text{ mL} + 300.0\text{ mL} = 500.0\text{ mL} \implies [\ce{Pb^{2+}}] = \frac{(2.50 \times 10^{-3}\text{ M})(200.0\text{ mL})}{500.0\text{ mL}} = 1.00 \times 10^{-3}\text{ M}

  2. Step 2

    Ksp=[PbX2+][IX−]2=9.8×10−9  ⟹  [IX−]=9.8×10−91.00×10−3=3.13×10−3 MK_{sp} = [\ce{Pb^{2+}}][\ce{I^-}]^2 = 9.8 \times 10^{-9} \implies [\ce{I^-}] = \sqrt{\frac{9.8 \times 10^{-9}}{1.00 \times 10^{-3}}} = 3.13 \times 10^{-3}\text{ M}

  3. Step 3

    [NaI]0=[IX−]=3.13×10−3 M[\ce{NaI}]_0 = [\ce{I^-}] = 3.13 \times 10^{-3}\text{ M}

    Correct

    [NaI]0=[IX−]⋅VtotalVNaI=3.13×10−3 M⋅500.0 mL300.0 mL≈5.22×10−3 M[\ce{NaI}]_0 = [\ce{I^-}] \cdot \frac{V_{\text{total}}}{V_{\ce{NaI}}} = 3.13 \times 10^{-3}\text{ M} \cdot \frac{500.0\text{ mL}}{300.0\text{ mL}} \approx 5.22 \times 10^{-3}\text{ M}

    You set the initial concentration [NaI]0[\ce{NaI}]_0 equal to the concentration of iodide in the combined 500.0 mL500.0\text{ mL} solution. Because 300.0 mL300.0\text{ mL} of the stock NaI\ce{NaI} solution was diluted to 500.0 mL500.0\text{ mL}, its initial concentration before mixing must be greater than [IX−]mixture[\ce{I^-}]_{\text{mixture}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total solution volume after mixing.

You correctly accounted for the dilution of the lead(II) nitrate solution.

You correctly wrote the KspK_{sp} expression including the quadratic exponent for iodide and solved for the mixture iodide concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglected second-reactant dilution

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the calculated ion concentration [IX−][\ce{I^-}] from the KspK_{sp} expression as the stock concentration of the reactant, overlooking that both solutions dilute each other when mixed together.

REASONING PATH
Your ACEpath teacher’s suggested approach
Two-way dilution check
  • Whenever two solutions mix, every solute present experiences dilution by the new total volume: C1V1=CmixVtotalC_1 V_1 = C_{\text{mix}} V_{\text{total}}.

  • Always convert target mixture concentrations back to stock concentrations using [Stock]0=[Ion]mix×VtotalVstock[\text{Stock}]_0 = [\text{Ion}]_{\text{mix}} \times \frac{V_{\text{total}}}{V_{\text{stock}}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the dilution relation for iodide: M1V1=M2V2  ⟹  [NaI]0⋅(300.0 mL)=[IX−]mix⋅(500.0 mL)M_1 V_1 = M_2 V_2 \implies [\ce{NaI}]_0 \cdot (300.0\text{ mL}) = [\ce{I^-}]_{\text{mix}} \cdot (500.0\text{ mL}).

  2. Substitute [IX−]mix=3.13×10−3 M[\ce{I^-}]_{\text{mix}} = 3.13 \times 10^{-3}\text{ M}: [NaI]0=3.13×10−3 M×500.0 mL300.0 mL[\ce{NaI}]_0 = 3.13 \times 10^{-3}\text{ M} \times \frac{500.0\text{ mL}}{300.0\text{ mL}}.

  3. Evaluate the final value: [NaI]0≈5.22×10−3 M[\ce{NaI}]_0 \approx 5.22 \times 10^{-3}\text{ M}.

Final answer

[NaI]0=5.22×10−3 M[\ce{NaI}]_0 = 5.22 \times 10^{-3}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that mixing two liquid solutions always dilutes both solutes; calculate a dilution factor for each solution.

  • Practice identifying whether a calculated value represents the concentration in the combined equilibrium mixture or in the original stock bottle before mixing.

OverviewACEpath Teacher's Diagnosis

03 The student erroneously includes stoichiometric coefficients inside the brackets by writing [I⁻] = 2x and substituting (2[I⁻])² into K_sp, leading to an extra factor of 4.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Vtotal=200.0 mL+300.0 mL=500.0 mL  ⟹  [PbX2+]=(2.50×10−3 M)(200.0 mL)500.0 mL=1.00×10−3 MV_{\text{total}} = 200.0\text{ mL} + 300.0\text{ mL} = 500.0\text{ mL} \implies [\ce{Pb^{2+}}] = \frac{(2.50 \times 10^{-3}\text{ M})(200.0\text{ mL})}{500.0\text{ mL}} = 1.00 \times 10^{-3}\text{ M}

  2. Step 2

    Ksp=[PbX2+](2[IX−])2=4[PbX2+][IX−]2=9.8×10−9K_{sp} = [\ce{Pb^{2+}}](2[\ce{I^-}])^2 = 4[\ce{Pb^{2+}}][\ce{I^-}]^2 = 9.8 \times 10^{-9}

    Correct

    Ksp=[PbX2+][IX−]2=9.8×10−9K_{sp} = [\ce{Pb^{2+}}][\ce{I^-}]^2 = 9.8 \times 10^{-9}

    In an equilibrium expression, the stoichiometric coefficient is applied solely as an exponent, not as a multiplier inside the concentration term. By writing (2[IX−])2(2[\ce{I^-}])^2, you erroneously introduced a factor of 44.

  3. Step 3

    [IX−]=9.8×10−94×1.00×10−3=1.57×10−3 M[\ce{I^-}] = \sqrt{\frac{9.8 \times 10^{-9}}{4 \times 1.00 \times 10^{-3}}} = 1.57 \times 10^{-3}\text{ M}

    Correct

    [IX−]=9.8×10−91.00×10−3=3.13×10−3 M[\ce{I^-}] = \sqrt{\frac{9.8 \times 10^{-9}}{1.00 \times 10^{-3}}} = 3.13 \times 10^{-3}\text{ M}

    Your algebra was carried out consistently with your previous line, but the result was divided by 4=2\sqrt{4} = 2 due to the erroneous multiplier in the KspK_{sp} expression.

  4. Step 4

    [NaI]0=(1.57×10−3 M)(500.0 mL)300.0 mL=2.61×10−3 M[\ce{NaI}]_0 = \frac{(1.57 \times 10^{-3}\text{ M})(500.0\text{ mL})}{300.0\text{ mL}} = 2.61 \times 10^{-3}\text{ M}

    Correct

    [NaI]0=(3.13×10−3 M)(500.0 mL)300.0 mL=5.22×10−3 M[\ce{NaI}]_0 = \frac{(3.13 \times 10^{-3}\text{ M})(500.0\text{ mL})}{300.0\text{ mL}} = 5.22 \times 10^{-3}\text{ M}

    You applied the dilution equation correctly, but the propagated error from the previous steps caused the final answer to be half of the true value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the final total volume after mixing.

You properly diluted the lead(II) nitrate solution to determine [PbX2+][\ce{Pb^{2+}}].

You correctly set up the dilution formula to relate the equilibrium [IX−][\ce{I^-}] back to the initial [NaI]0[\ce{NaI}]_0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometry double-counting in equilibrium expression

You wrote (2[IX−])2(2[\ce{I^-}])^2 instead of [IX−]2[\ce{I^-}]^2, confusing molar solubility ss with actual ionic concentration [IX−][\ce{I^-}].

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the pure-water molar solubility substitution ([PbX2+]=s[\ce{Pb^{2+}}] = s, [IX−]=2s[\ce{I^-}] = 2s, giving Ksp=s(2s)2=4s3K_{sp} = s(2s)^2 = 4s^3) with the fundamental Law of Mass Action. When expressing KspK_{sp} directly in terms of ion concentrations, the stoichiometric coefficient appears only as a power: Ksp=[PbX2+][IX−]2K_{sp} = [\ce{Pb^{2+}}][\ce{I^-}]^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish $[\text{Ion}]$ from Molar Solubility $s$
  • For a salt AXm BXn(s)⇌m AXn+(aq)+n BXm−(aq)\ce{A_m B_n(s) <=> m A^{n+}(aq) + n B^{m-}(aq)}, Ksp=[AXn+]m[BXm−]nK_{sp} = [\ce{A^{n+}}]^m [\ce{B^{m-}}]^n. Never place stoichiometric coefficients inside the brackets around ion formulas.

  • Always write the raw law of mass action using brackets first: Ksp=[PbX2+][IX−]2K_{sp} = [\ce{Pb^{2+}}][\ce{I^-}]^2. Only multiply by stoichiometric coefficients if you are explicitly substituting an algebraic variable representing molar solubility ss.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the correct solubility product expression: Ksp=[PbX2+][IX−]2=9.8×10−9K_{sp} = [\ce{Pb^{2+}}][\ce{I^-}]^2 = 9.8 \times 10^{-9}.

  2. Substitute [PbX2+]=1.00×10−3 M[\ce{Pb^{2+}}] = 1.00 \times 10^{-3}\text{ M} and solve for [IX−][\ce{I^-}]: [IX−]2=9.8×10−91.00×10−3 M=9.80×10−6 M2  ⟹  [IX−]=3.13×10−3 M[\ce{I^-}]^2 = \frac{9.8 \times 10^{-9}}{1.00 \times 10^{-3}\text{ M}} = 9.80 \times 10^{-6}\text{ M}^2 \implies [\ce{I^-}] = 3.13 \times 10^{-3}\text{ M}.

  3. Calculate the required initial concentration [NaI]0[\ce{NaI}]_0 before mixing: [NaI]0=[IX−]⋅VtotalVinitial=(3.13×10−3 M)(500.0 mL)300.0 mL=5.22×10−3 M[\ce{NaI}]_0 = \frac{[\ce{I^-}] \cdot V_{\text{total}}}{V_{\text{initial}}} = \frac{(3.13 \times 10^{-3}\text{ M})(500.0\text{ mL})}{300.0\text{ mL}} = 5.22 \times 10^{-3}\text{ M}.

Final answer

[NaI]0=5.22×10−3 M[\ce{NaI}]_0 = 5.22 \times 10^{-3}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between the equilibrium constant expression in terms of actual concentrations ([A]m[B]n[\ce{A}]^m[\ce{B}]^n) versus the variable substitution for dissolving a pure salt into water ((ms)m(ns)n(ms)^m(ns)^n).

  • Practice setting up QspQ_{sp} expressions for mixing problems where the ions originate from separate soluble sources.

Lock it in

Similar question

01

A solution contains [Ag+]=1.0×10−4 M[\text{Ag}^+] = 1.0 \times 10^{-4}\text{ M}. If Ksp(Ag2SO4)=1.2×10−5K_{sp}(\text{Ag}_2\text{SO}_4) = 1.2 \times 10^{-5}, what is the maximum concentration of sulfate ions [SO42−][\text{SO}_4^{2-}] that can exist in this solution without initiating precipitation?

Answer

Net ionic equilibrium: Ag2SO4(s)⇌2Ag+(aq)+SO42−(aq)\text{Ag}_2\text{SO}_4(s) \rightleftharpoons 2\text{Ag}^+(aq) + \text{SO}_4^{2-}(aq). The KspK_{sp} expression is Ksp=[Ag+]2[SO42−]K_{sp} = [\text{Ag}^+]^2 [\text{SO}_4^{2-}]. Substitute the known values: 1.2×10−5=(1.0×10−4)2[SO42−]=(1.0×10−8)[SO42−]1.2 \times 10^{-5} = (1.0 \times 10^{-4})^2 [\text{SO}_4^{2-}] = (1.0 \times 10^{-8}) [\text{SO}_4^{2-}]. Solving yields [SO42−]=1.2×10−51.0×10−8=1.2×103 M[\text{SO}_4^{2-}] = \frac{1.2 \times 10^{-5}}{1.0 \times 10^{-8}} = 1.2 \times 10^3\text{ M} (the salt will not precipitate at any realistic sulfate concentration).

02

Equal volumes (100.0 mL100.0\text{ mL} each) of 4.0×10−3 M CaCl24.0 \times 10^{-3}\text{ M } \text{CaCl}_2 and an unknown KF\text{KF} solution are mixed at 25∘C25^\circ\text{C}. Given Ksp(CaF2)=4.0×10−11K_{sp}(\text{CaF}_2) = 4.0 \times 10^{-11}, calculate the minimum initial concentration of KF\text{KF}, [KF]0[\text{KF}]_0, required to begin precipitation.

Answer

Mixing equal volumes halves both concentrations: [Ca2+]=4.0×10−3 M2=2.0×10−3 M[\text{Ca}^{2+}] = \frac{4.0 \times 10^{-3}\text{ M}}{2} = 2.0 \times 10^{-3}\text{ M}. At the precipitation threshold, Qsp=[Ca2+][F−]2=Ksp=4.0×10−11Q_{sp} = [\text{Ca}^{2+}][\text{F}^-]^2 = K_{sp} = 4.0 \times 10^{-11}. Thus [F−]2=4.0×10−112.0×10−3=2.0×10−8 M2[\text{F}^-]^2 = \frac{4.0 \times 10^{-11}}{2.0 \times 10^{-3}} = 2.0 \times 10^{-8}\text{ M}^2, so [F−]=2.0×10−8≈1.41×10−4 M[\text{F}^-] = \sqrt{2.0 \times 10^{-8}} \approx 1.41 \times 10^{-4}\text{ M}. Accounting for the 1:21:2 dilution: [KF]0=2×[F−]=2×(1.41×10−4 M)≈2.8×10−4 M[\text{KF}]_0 = 2 \times [\text{F}^-] = 2 \times (1.41 \times 10^{-4}\text{ M}) \approx 2.8 \times 10^{-4}\text{ M}.

03

A chemist mixes 150.0 mL150.0\text{ mL} of 1.20×10−3 M Mg(NO3)21.20 \times 10^{-3}\text{ M } \text{Mg(NO}_3)_2 with 350.0 mL350.0\text{ mL} of an unknown NaOH\text{NaOH} solution. If Ksp(Mg(OH)2)=5.61×10−12K_{sp}(\text{Mg(OH)}_2) = 5.61 \times 10^{-12}, find the maximum initial molarity of NaOH\text{NaOH} such that no solid hydroxide precipitates.

Answer

Vtotal=150.0 mL+350.0 mL=500.0 mLV_{\text{total}} = 150.0\text{ mL} + 350.0\text{ mL} = 500.0\text{ mL}. Diluted magnesium concentration: [Mg2+]=(1.20×10−3 M)(150.0 mL)500.0 mL=3.60×10−4 M[\text{Mg}^{2+}] = \frac{(1.20 \times 10^{-3}\text{ M})(150.0\text{ mL})}{500.0\text{ mL}} = 3.60 \times 10^{-4}\text{ M}. The equilibrium is Mg(OH)2(s)⇌Mg2+(aq)+2OH−(aq)\text{Mg(OH)}_2(s) \rightleftharpoons \text{Mg}^{2+}(aq) + 2\text{OH}^-(aq), so Ksp=[Mg2+][OH−]2K_{sp} = [\text{Mg}^{2+}][\text{OH}^-]^2. Substitute: [OH−]2=5.61×10−123.60×10−4=1.558×10−8 M2  ⟹  [OH−]≈1.25×10−4 M[\text{OH}^-]^2 = \frac{5.61 \times 10^{-12}}{3.60 \times 10^{-4}} = 1.558 \times 10^{-8}\text{ M}^2 \implies [\text{OH}^-] \approx 1.25 \times 10^{-4}\text{ M}. Finally, reverse the dilution for NaOH\text{NaOH}: [NaOH]0=(1.25×10−4 M)×500.0 mL350.0 mL≈1.78×10−4 M[\text{NaOH}]_0 = (1.25 \times 10^{-4}\text{ M}) \times \frac{500.0\text{ mL}}{350.0\text{ mL}} \approx 1.78 \times 10^{-4}\text{ M}.

Loading workspace…