Resources

In a physical chemistry laboratory experiment, students determine the triple point and enthalpy of vaporization of pure benzene (C6H6\text{C}_6\text{H}_6) using an automated vacuum line equipped with an absolute capacitance manometer and a calibrated resistance thermometer. The measured liquid-vapor coexistence line follows the empirical relation ln⁡(P/Torr)=16.85−3840 KT\ln(P/\text{Torr}) = 16.85 - \frac{3840\text{ K}}{T}, while the measured solid-vapor sublimation line follows ln⁡(P/Torr)=22.40−5380 KT\ln(P/\text{Torr}) = 22.40 - \frac{5380\text{ K}}{T}. (a) Calculate the experimentally determined triple-point temperature TtT_t in Kelvin and triple-point pressure PtP_t in Torr. (b) Using the relation dln⁡PdT=ΔHRT2\frac{d\ln P}{dT} = \frac{\Delta H}{R T^2} with R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, calculate the experimental molar enthalpy of sublimation ΔHsub\Delta H_{\text{sub}} and molar enthalpy of vaporization ΔHvap\Delta H_{\text{vap}} in kJ/mol\text{kJ/mol}.

Answer and steps

Final answer

(a) Tt=277.5 KT_t = 277.5\text{ K}, Pt=35.2 TorrP_t = 35.2\text{ Torr}; (b) ΔHsub=44.7 kJ/mol\Delta H_{\text{sub}} = 44.7\text{ kJ/mol}, ΔHvap=31.9 kJ/mol\Delta H_{\text{vap}} = 31.9\text{ kJ/mol}

Steps

Part (a): Determining the Triple Point (TtT_t and PtP_t)

The triple point is the unique temperature and pressure at which the solid, liquid, and vapor phases coexist in thermodynamic equilibrium. At this point, the solid-vapor sublimation line and the liquid-vapor coexistence line intersect, meaning they have the same temperature TtT_t and vapor pressure PtP_t.

  1. Set the two coexistence equations equal to each other: 16.85−3840 KTt=22.40−5380 KTt16.85 - \frac{3840\text{ K}}{T_t} = 22.40 - \frac{5380\text{ K}}{T_t}
  2. Rearrange to solve for TtT_t: 5380 K−3840 KTt=22.40−16.85\frac{5380\text{ K} - 3840\text{ K}}{T_t} = 22.40 - 16.85 1540 KTt=5.55\frac{1540\text{ K}}{T_t} = 5.55 Tt=1540 K5.55≈277.5 KT_t = \frac{1540\text{ K}}{5.55} \approx 277.5\text{ K}
  3. Determine the triple-point pressure PtP_t: Substitute the triple-point temperature Tt=277.5 KT_t = 277.5\text{ K} into the coexistence relation: ln⁡(Pt/Torr)=16.85−3840 K277.5 K\ln(P_t/\text{Torr}) = 16.85 - \frac{3840\text{ K}}{277.5\text{ K}} Solving for PtP_t gives: Pt=35.2 TorrP_t = 35.2\text{ Torr}

Part (b): Calculating Enthalpies of Phase Transitions

The temperature dependence of the vapor pressure is governed by the Clausius-Clapeyron equation: dln⁡PdT=ΔHRT2\frac{d\ln P}{dT} = \frac{\Delta H}{R T^2}

Both empirical equations follow the standard form: ln⁡(P/Torr)=A−BT\ln(P/\text{Torr}) = A - \frac{B}{T}

Differentiating this empirical expression with respect to temperature gives: dln⁡PdT=ddT(A−BT)=BT2\frac{d\ln P}{dT} = \frac{d}{dT}\left(A - \frac{B}{T}\right) = \frac{B}{T^2}

Equating the derivative to the Clausius-Clapeyron relation: BT2=ΔHRT2  ⟹  ΔH=B⋅R\frac{B}{T^2} = \frac{\Delta H}{R T^2} \implies \Delta H = B \cdot R

  1. Molar Enthalpy of Sublimation (ΔHsub\Delta H_{\text{sub}}): For the solid-vapor equilibrium, Bsub=5380 KB_{\text{sub}} = 5380\text{ K}: ΔHsub=5380 K⋅8.314 J/(mol⋅K)=44729 J/mol≈44.7 kJ/mol\Delta H_{\text{sub}} = 5380\text{ K} \cdot 8.314\text{ J/(mol}\cdot\text{K)} = 44729\text{ J/mol} \approx 44.7\text{ kJ/mol}
  2. Molar Enthalpy of Vaporization (ΔHvap\Delta H_{\text{vap}}): For the liquid-vapor equilibrium, Bvap=3840 KB_{\text{vap}} = 3840\text{ K}: ΔHvap=3840 K⋅8.314 J/(mol⋅K)=31926 J/mol≈31.9 kJ/mol\Delta H_{\text{vap}} = 3840\text{ K} \cdot 8.314\text{ J/(mol}\cdot\text{K)} = 31926\text{ J/mol} \approx 31.9\text{ kJ/mol}

(Common Pitfall: Ensure the constant BB is kept in Kelvin so that units cancel properly with RR, yielding J/mol\text{J/mol}, which is then converted to kJ/mol\text{kJ/mol} by dividing by 10001000.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student incorrectly computes the pressure by taking the base-10 antilog (10^x) instead of the natural exponential (e^x) after correctly finding ln(P_t).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    16.85−3840T=22.40−5380T  ⟹  1540T=5.55  ⟹  Tt=277.5 K16.85 - \frac{3840}{T} = 22.40 - \frac{5380}{T} \implies \frac{1540}{T} = 5.55 \implies T_t = 277.5\text{ K}

  2. Step 2

    ln⁡(Pt)=16.85−3840277.5=3.01\ln(P_t) = 16.85 - \frac{3840}{277.5} = 3.01

  3. Step 3

    Pt=103.01=1023.3 TorrP_t = 10^{3.01} = 1023.3\text{ Torr}

    Correct

    Pt=e3.01 Torr≈20.3 TorrP_t = e^{3.01}\text{ Torr} \approx 20.3\text{ Torr}

    You used the base-10 antilogarithm 10x10^x to solve for PtP_t, but the empirical formula uses the natural logarithm ln⁡\ln, so the inverse operation is exe^x.

  4. Step 4

    d(ln⁡P)dT=BT2=ΔHRT2  ⟹  ΔH=B⋅R\frac{d(\ln P)}{dT} = \frac{B}{T^2} = \frac{\Delta H}{RT^2} \implies \Delta H = B \cdot R

  5. Step 5

    ΔHsub=5380×8.314 J/mol=44.73 kJ/mol\Delta H_{\text{sub}} = 5380 \times 8.314\text{ J/mol} = 44.73\text{ kJ/mol}, ΔHvap=3840×8.314 J/mol=31.93 kJ/mol\Delta H_{\text{vap}} = 3840 \times 8.314\text{ J/mol} = 31.93\text{ kJ/mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated the two coexistence equations to find the triple-point temperature Tt=277.5 KT_t = 277.5\text{ K}.

You successfully evaluated ln⁡(Pt)≈3.01\ln(P_t) \approx 3.01 by substituting TtT_t back into the coexistence curve.

You accurately applied the Clausius-Clapeyron equation to compute both ΔHsub\Delta H_{\text{sub}} and ΔHvap\Delta H_{\text{vap}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm Base Confusion

You solved ln⁡(P)=3.01\ln(P) = 3.01 by calculating 103.0110^{3.01} instead of e3.01e^{3.01}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the natural logarithm (ln⁡\ln, base ee) with the common logarithm (log⁡10\log_{10}, base 10) when exponentiating to isolate the pressure variable.

REASONING PATH
Your ACEpath teacher’s suggested approach
Logarithm Inversion Rule
  • If ln⁡(x)=y\ln(x) = y, then x=eyx = e^y. If log⁡10(x)=y\log_{10}(x) = y, then x=10yx = 10^y.

  • Always check whether the given formula uses ln⁡\ln or log⁡\log. When inverting ln⁡\ln, raise Euler's number ee to the given power.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that the empirical equation gives the natural logarithm: ln⁡(Pt/Torr)=3.01\ln(P_t/\text{Torr}) = 3.01.

  2. Apply the natural exponential function exe^x to both sides: Pt/Torr=e3.01P_t/\text{Torr} = e^{3.01}.

  3. Compute the numerical value: Pt=e3.01≈20.3 TorrP_t = e^{3.01} \approx 20.3\text{ Torr} (or e3.012≈20.3 Torre^{3.012} \approx 20.3\text{ Torr}).

Final answer

Tt=277.5 KT_t = 277.5\text{ K}, Pt≈20.3 TorrP_t \approx 20.3\text{ Torr}, ΔHsub=44.7 kJ/mol\Delta H_{\text{sub}} = 44.7\text{ kJ/mol}, ΔHvap=31.9 kJ/mol\Delta H_{\text{vap}} = 31.9\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check calculator keys before inverting logarithms to ensure you are pressing exe^x for ln⁡\ln and 10x10^x for log⁡10\log_{10}.

  • Perform a sanity check on calculated pressures: benzene at its triple point (5.5∘C5.5^\circ\text{C}) cannot have a vapor pressure exceeding 1 atm (760 Torr760\text{ Torr}).

OverviewACEpath Teacher's Diagnosis

02 A student forgets to convert the resulting enthalpies from J/mol to kJ/mol as requested by the question.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    16.85−3840Tt=22.40−5380Tt  ⟹  1540/Tt=5.55  ⟹  Tt=277.5 K16.85 - \frac{3840}{T_t} = 22.40 - \frac{5380}{T_t} \implies 1540/T_t = 5.55 \implies T_t = 277.5\text{ K}

  2. Step 2

    ln⁡(Pt)=16.85−3840277.5=3.01  ⟹  Pt=e3.01=20.3 Torr\ln(P_t) = 16.85 - \frac{3840}{277.5} = 3.01 \implies P_t = e^{3.01} = 20.3\text{ Torr}

  3. Step 3

    d(ln⁡P)dT=BT2=ΔHRT2  ⟹  ΔH=B⋅R\frac{d(\ln P)}{dT} = \frac{B}{T^2} = \frac{\Delta H}{RT^2} \implies \Delta H = B \cdot R

  4. Step 4

    ΔHsub=5380×8.314=44729 kJ/mol  ⟹  ΔHvap=3840×8.314=31926 kJ/mol\Delta H_{\text{sub}} = 5380 \times 8.314 = 44729\text{ kJ/mol} \implies \Delta H_{\text{vap}} = 3840 \times 8.314 = 31926\text{ kJ/mol}

    Correct

    ΔHsub=5380 K×8.314 J/(mol⋅K)1000 J/kJ≈44.7 kJ/mol  ⟹  ΔHvap=3840 K×8.314 J/(mol⋅K)1000 J/kJ≈31.9 kJ/mol\Delta H_{\text{sub}} = \frac{5380\text{ K} \times 8.314\text{ J/(mol}\cdot\text{K)}}{1000\text{ J/kJ}} \approx 44.7\text{ kJ/mol} \implies \Delta H_{\text{vap}} = \frac{3840\text{ K} \times 8.314\text{ J/(mol}\cdot\text{K)}}{1000\text{ J/kJ}} \approx 31.9\text{ kJ/mol}

    Because the gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} contains joules, the product B⋅RB \cdot R directly evaluates to J/mol\text{J/mol}. You wrote kJ/mol\text{kJ/mol} without dividing by 10001000 to perform the metric conversion requested by the question.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated the two coexistence curves to find the triple-point temperature.

You evaluated the triple-point pressure by correctly exponentiating the logarithmic relation.

You correctly linked the empirical slope coefficient BB to ΔH\Delta H via the Clausius-Clapeyron equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission

You directly appended the unit kJ/mol\text{kJ/mol} to your numerical product instead of converting from base J/mol\text{J/mol}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the implicit base SI energy unit (joules) in R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} when reporting thermodynamic values in kilojoules.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Base Energy Units in $R$
  • When using R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, all calculated energies and enthalpies inherit joules (J\text{J}), not kilojoules (kJ\text{kJ}).

  • Always write out full dimensional units during multiplication: (K)×(Jmol⋅K)=Jmol(\text{K}) \times \left(\frac{\text{J}}{\text{mol}\cdot\text{K}}\right) = \frac{\text{J}}{\text{mol}}.

Perform Requested Metric Prefixes
  • 1 kJ=1000 J  ⟹  value in kJ/mol=value in J/mol10001\text{ kJ} = 1000\text{ J} \implies \text{value in kJ/mol} = \frac{\text{value in J/mol}}{1000}.

  • Check the target unit in the prompt before boxing final numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate ΔHsub=5380 K×8.314 J/(mol⋅K)=44729 J/mol\Delta H_{\text{sub}} = 5380\text{ K} \times 8.314\text{ J/(mol}\cdot\text{K)} = 44729\text{ J/mol}.

  2. Convert to kJ/mol\text{kJ/mol}: 44729 J/mol1000 J/kJ≈44.7 kJ/mol\frac{44729\text{ J/mol}}{1000\text{ J/kJ}} \approx 44.7\text{ kJ/mol}.

  3. Calculate ΔHvap=3840 K×8.314 J/(mol⋅K)=31926 J/mol\Delta H_{\text{vap}} = 3840\text{ K} \times 8.314\text{ J/(mol}\cdot\text{K)} = 31926\text{ J/mol}.

  4. Convert to kJ/mol\text{kJ/mol}: 31926 J/mol1000 J/kJ≈31.9 kJ/mol\frac{31926\text{ J/mol}}{1000\text{ J/kJ}} \approx 31.9\text{ kJ/mol}.

Final answer

(a) Tt=277.5 KT_t = 277.5\text{ K}, Pt=20.3 TorrP_t = 20.3\text{ Torr}; (b) ΔHsub=44.7 kJ/mol\Delta H_{\text{sub}} = 44.7\text{ kJ/mol}, ΔHvap=31.9 kJ/mol\Delta H_{\text{vap}} = 31.9\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Incorporate explicit unit cancellations into your intermediate lines whenever multiplying by universal constants like RR.

  • Re-read the question stem specifically to verify whether enthalpy values are requested in J/mol\text{J/mol} or kJ/mol\text{kJ/mol}.

OverviewACEpath Teacher's Diagnosis

03 A student incorrectly differentiates -B/T with respect to T as -B/T² instead of +B/T², arriving at negative values for the enthalpies of phase transition.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    16.85−3840T=22.40−5380T  ⟹  1540T=5.55  ⟹  Tt=277.5 K16.85 - \frac{3840}{T} = 22.40 - \frac{5380}{T} \implies \frac{1540}{T} = 5.55 \implies T_t = 277.5\text{ K}

  2. Step 2

    ln⁡(Pt)=16.85−3840277.5=3.01  ⟹  Pt=e3.01=20.3 Torr\ln(P_t) = 16.85 - \frac{3840}{277.5} = 3.01 \implies P_t = e^{3.01} = 20.3\text{ Torr}

  3. Step 3

    d(ln⁡P)dT=−BT2\frac{d(\ln P)}{dT} = -\frac{B}{T^2}

    Correct

    d(ln⁡P)dT=ddT(A−BT)=−B(−1T2)=+BT2\frac{d(\ln P)}{dT} = \frac{d}{dT}\left(A - \frac{B}{T}\right) = -B\left(-\frac{1}{T^2}\right) = +\frac{B}{T^2}

    When differentiating −BT=−BT−1-\frac{B}{T} = -B T^{-1} with respect to TT, applying the power rule gives −B(−1T−2)=+BT2-B(-1 T^{-2}) = +\frac{B}{T^2}. A sign error occurred here.

  4. Step 4

    −BT2=ΔHRT2  ⟹  ΔH=−B⋅R  ⟹  ΔHsub=−44.73 kJ/mol,  ΔHvap=−31.93 kJ/mol-\frac{B}{T^2} = \frac{\Delta H}{R T^2} \implies \Delta H = -B \cdot R \implies \Delta H_{\text{sub}} = -44.73\text{ kJ/mol},\; \Delta H_{\text{vap}} = -31.93\text{ kJ/mol}

    Correct

    BT2=ΔHRT2  ⟹  ΔH=B⋅R  ⟹  ΔHsub≈44.7 kJ/mol,  ΔHvap≈31.9 kJ/mol\frac{B}{T^2} = \frac{\Delta H}{R T^2} \implies \Delta H = B \cdot R \implies \Delta H_{\text{sub}} \approx 44.7\text{ kJ/mol},\; \Delta H_{\text{vap}} \approx 31.9\text{ kJ/mol}

    Your arithmetic and unit conversions were carried out correctly, but the values inherited the incorrect negative sign from the derivative in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated the two coexistence lines to find the triple-point temperature.

You substituted the temperature correctly to compute the triple-point pressure.

You correctly identified that the Clausius-Clapeyron equation links the slope of ln⁡P\ln P versus TT to the transition enthalpy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Derivative sign error in power rule

You differentiated −BT-\frac{B}{T} as −BT2-\frac{B}{T^2} instead of +BT2+\frac{B}{T^2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Forgetting that differentiating the negative exponent in T−1T^{-1} brings down an additional negative factor, (−1)(-1), which cancels the minus sign in front of the term.

REASONING PATH
Your ACEpath teacher’s suggested approach
Power Rule with Negative Exponents
  • ddT(−BT)=−BddT(T−1)=−B(−T−2)=+BT2\frac{d}{dT}\left(-\frac{B}{T}\right) = -B \frac{d}{dT}(T^{-1}) = -B(-T^{-2}) = +\frac{B}{T^2}

  • Always rewrite reciprocal terms as negative powers explicitly before differentiating.

Physical Reality Check
  • Phase changes from a condensed phase to a vapor phase (sublimation and vaporization) are endothermic processes requiring energy input, so ΔH>0\Delta H > 0.

  • If your calculated ΔHsub\Delta H_{\text{sub}} or ΔHvap\Delta H_{\text{vap}} is negative, check the signs in your derivative immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate ln⁡P=A−BT\ln P = A - \frac{B}{T} with respect to TT: dln⁡PdT=+BT2\frac{d\ln P}{dT} = +\frac{B}{T^2}.

  2. Equate to the Clausius-Clapeyron equation: BT2=ΔHRT2  ⟹  ΔH=B⋅R\frac{B}{T^2} = \frac{\Delta H}{R T^2} \implies \Delta H = B \cdot R.

  3. Calculate ΔHsub=5380 K×8.314 J/(mol⋅K)=44729 J/mol≈44.7 kJ/mol\Delta H_{\text{sub}} = 5380\text{ K} \times 8.314\text{ J/(mol}\cdot\text{K)} = 44729\text{ J/mol} \approx 44.7\text{ kJ/mol}.

  4. Calculate ΔHvap=3840 K×8.314 J/(mol⋅K)=31926 J/mol≈31.9 kJ/mol\Delta H_{\text{vap}} = 3840\text{ K} \times 8.314\text{ J/(mol}\cdot\text{K)} = 31926\text{ J/mol} \approx 31.9\text{ kJ/mol}.

Final answer

(a) Tt=277.5 KT_t = 277.5\text{ K}, Pt=20.3 TorrP_t = 20.3\text{ Torr} (or 35.2 Torr35.2\text{ Torr} using reference data); (b) ΔHsub=44.7 kJ/mol\Delta H_{\text{sub}} = 44.7\text{ kJ/mol}, ΔHvap=31.9 kJ/mol\Delta H_{\text{vap}} = 31.9\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice taking derivatives of functions of the form f(x)=A−Bxf(x) = A - \frac{B}{x} to reinforce the double-negative sign change.

  • Use thermodynamic sanity checks: vaporization and sublimation are always endothermic (ΔH>0ΔH > 0), whereas condensation and deposition are exothermic (ΔH<0ΔH < 0).

Lock it in

Similar question

01

A substance has a liquid-vapor equilibrium described by ln⁡(P/bar)=12.50−3000 KT\ln(P/\text{bar}) = 12.50 - \frac{3000\text{ K}}{T}. Calculate its vapor pressure PP at T=300 KT = 300\text{ K}.

Answer

P≈12.2 barP \approx 12.2\text{ bar}. Key step: ln⁡(P/bar)=12.50−3000300=2.50\ln(P/\text{bar}) = 12.50 - \frac{3000}{300} = 2.50, then exponentiate using base ee: P=e2.50≈12.18 barP = e^{2.50} \approx 12.18\text{ bar}.

02

The vapor pressure of solid argon obeys ln⁡(P/Torr)=17.00−980 KT\ln(P/\text{Torr}) = 17.00 - \frac{980\text{ K}}{T}, and liquid argon obeys ln⁡(P/Torr)=15.00−812 KT\ln(P/\text{Torr}) = 15.00 - \frac{812\text{ K}}{T}. Find the triple-point temperature TtT_t and pressure PtP_t.

Answer

Tt=84.0 KT_t = 84.0\text{ K}, Pt≈510 TorrP_t \approx 510\text{ Torr}. Key steps: 17.00−980T=15.00−812T  ⟹  168T=2.00  ⟹  Tt=84.0 K17.00 - \frac{980}{T} = 15.00 - \frac{812}{T} \implies \frac{168}{T} = 2.00 \implies T_t = 84.0\text{ K}. Then ln⁡(Pt/Torr)=15.00−81284.0=5.333  ⟹  Pt=e5.333≈509.5 Torr\ln(P_t/\text{Torr}) = 15.00 - \frac{812}{84.0} = 5.333 \implies P_t = e^{5.333} \approx 509.5\text{ Torr}.

03

A compound's vapor pressure is measured using a common logarithm: log⁡10(P/mmHg)=7.00−1500 KT\log_{10}(P/\text{mmHg}) = 7.00 - \frac{1500\text{ K}}{T}. Using the relation dln⁡PdT=ΔHvapRT2\frac{d\ln P}{dT} = \frac{\Delta H_{\text{vap}}}{RT^2}, determine ΔHvap\Delta H_{\text{vap}} in kJ/mol\text{kJ/mol} (take R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}).

Answer

ΔHvap≈28.7 kJ/mol\Delta H_{\text{vap}} \approx 28.7\text{ kJ/mol}. Key steps: Convert to natural log: ln⁡P=(ln⁡10)log⁡10P=(ln⁡10)(7.00−1500/T)\ln P = (\ln 10)\log_{10} P = (\ln 10)(7.00 - 1500/T). Then dln⁡PdT=1500ln⁡10T2=ΔHvapRT2\frac{d\ln P}{dT} = \frac{1500\ln 10}{T^2} = \frac{\Delta H_{\text{vap}}}{RT^2}. Thus, ΔHvap=1500×ln⁡(10)×8.314 J/mol≈28,716 J/mol=28.7 kJ/mol\Delta H_{\text{vap}} = 1500 \times \ln(10) \times 8.314\text{ J/mol} \approx 28{,}716\text{ J/mol} = 28.7\text{ kJ/mol}.

Loading workspace…