Resources

A standard sample of hydrated magnesium sulfate has the chemical formula MgSO4⋅7H2O\text{MgSO}_4 \cdot 7\text{H}_2\text{O}. Given the atomic masses Mg=24.31 g/mol\text{Mg} = 24.31\text{ g/mol}, S=32.06 g/mol\text{S} = 32.06\text{ g/mol}, O=16.00 g/mol\text{O} = 16.00\text{ g/mol}, and H=1.008 g/mol\text{H} = 1.008\text{ g/mol}, calculate the total mass percent of water of crystallization (hydration) present in one mole of this compound. Express your answer to four significant figures.

Answer and steps

Final answer

51.17%51.17\%

Steps

01

Calculate the molar mass of the water component (7HX2O7\ce{H2O})

To find the mass percent of water of crystallization in hydrated magnesium sulfate (MgSOX4 ⋅ 7 HX2O\ce{MgSO4.7H2O}), determine the mass contributed by the water molecules relative to the total molar mass of the hydrate.

  1. Find the molar mass of a single water molecule (HX2O\ce{H2O}): Molar mass of HX2O=2(1.008 g/mol)+16.00 g/mol=2.016+16.00=18.016 g/mol\text{Molar mass of } \ce{H2O} = 2(1.008\text{ g/mol}) + 16.00\text{ g/mol} = 2.016 + 16.00 = 18.016\text{ g/mol} According to addition rules for significant figures (limiting to two decimal places based on 16.00 g/mol16.00\text{ g/mol}), this is 18.02 g/mol18.02\text{ g/mol}.
  2. Multiply by 77 for the seven water molecules in the formula: Mass of 7HX2O=7⋅18.02 g/mol=126.14 g/mol\text{Mass of } 7\ce{H2O} = 7 \cdot 18.02\text{ g/mol} = 126.14\text{ g/mol}

02

Calculate the molar mass of the anhydrous salt (MgSOX4\ce{MgSO4})

Using the provided atomic masses: Molar mass of MgSOX4=24.31 g/mol+32.06 g/mol+4(16.00 g/mol)\text{Molar mass of } \ce{MgSO4} = 24.31\text{ g/mol} + 32.06\text{ g/mol} + 4(16.00\text{ g/mol}) Molar mass of MgSOX4=24.31+32.06+64.00=120.37 g/mol\text{Molar mass of } \ce{MgSO4} = 24.31 + 32.06 + 64.00 = 120.37\text{ g/mol}


03

Calculate the total molar mass of the hydrate (MgSOX4 ⋅ 7 HX2O\ce{MgSO4.7H2O})

Add the mass of the anhydrous salt and the water of crystallization: Total molar mass=120.37 g/mol+126.14 g/mol=246.51 g/mol\text{Total molar mass} = 120.37\text{ g/mol} + 126.14\text{ g/mol} = 246.51\text{ g/mol}


04

Calculate the mass percent of water

Apply the mass percent formula: Mass % of HX2O=(Mass of 7HX2OTotal molar mass of MgSOX4 ⋅ 7 HX2O)⋅100%\text{Mass } \% \text{ of } \ce{H2O} = \left(\frac{\text{Mass of } 7\ce{H2O}}{\text{Total molar mass of } \ce{MgSO4.7H2O}}\right) \cdot 100\%

Mass % of HX2O=(126.14 g/mol246.51 g/mol)⋅100%≈51.1703%\text{Mass } \% \text{ of } \ce{H2O} = \left(\frac{126.14\text{ g/mol}}{246.51\text{ g/mol}}\right) \cdot 100\% \approx 51.1703\%

Rounding to four significant figures gives 51.17%51.17\%.

(Pitfall to avoid: Do not subtract water or treat the dot in MgSOX4 ⋅ 7 HX2O\ce{MgSO4.7H2O} as a multiplication sign in mass arithmetic; it indicates that the seven water molecules are bound into the crystal lattice and must be added to the total mass.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the mass of only one water molecule in the numerator instead of multiplying by the stoichiometric coefficient of seven.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Molar mass of H2O=2(1.008)+16.00=18.016 g/mol\text{Molar mass of } \text{H}_2\text{O} = 2(1.008) + 16.00 = 18.016\text{ g/mol}

  2. Step 2

    Molar mass of MgSO4=24.31+32.06+4(16.00)=120.37 g/mol\text{Molar mass of } \text{MgSO}_4 = 24.31 + 32.06 + 4(16.00) = 120.37\text{ g/mol}

  3. Step 3

    Total molar mass=120.37+7(18.016)=246.482 g/mol\text{Total molar mass} = 120.37 + 7(18.016) = 246.482\text{ g/mol}

  4. Step 4

    Mass percent=(18.016/246.482)×100%=7.309%\text{Mass percent} = (18.016 / 246.482) \times 100\% = 7.309\%

    Correct

    Mass percent=(7×18.016 g/mol246.482 g/mol)×100%=51.17%\text{Mass percent} = \left(\frac{7 \times 18.016\text{ g/mol}}{246.482\text{ g/mol}}\right) \times 100\% = 51.17\%

    You placed the mass of just one water molecule (18.016 g/mol18.016\text{ g/mol}) in the numerator. Because the hydrate contains seven water molecules per formula unit, you must include the total mass of all seven water molecules (7×18.016 g/mol=126.112 g/mol7 \times 18.016\text{ g/mol} = 126.112\text{ g/mol}) in the numerator.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the molar mass of single water molecules and anhydrous MgSO4\text{MgSO}_4.

You recognized that seven water molecules contribute to the total molar mass of the hydrate in the denominator.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted stoichiometric coefficient in numerator

You remembered to multiply water by 77 when summing the total hydrate mass, but forgot to carry that coefficient of 77 into the numerator when setting up the mass percent ratio.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete application of component mass in percent composition. When calculating the mass percent of a hydrate's water of crystallization, the numerator must represent the total mass contributed by all crystal water molecules (n⋅MH2On \cdot M_{\text{H}_2\text{O}}), not just the molar mass of a single H2O\text{H}_2\text{O} molecule.

REASONING PATH
Your ACEpath teacher’s suggested approach
Numerator Check
  • Mass % of H2O=(n×MH2OMhydrate)×100%\text{Mass } \% \text{ of } \text{H}_2\text{O} = \left(\frac{n \times M_{\text{H}_2\text{O}}}{M_{\text{hydrate}}}\right) \times 100\%

  • Always multiply the molar mass of water by the hydration coefficient nn in both the numerator and the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate total mass of water in one mole of hydrate: 7×18.016 g/mol=126.112 g/mol7 \times 18.016\text{ g/mol} = 126.112\text{ g/mol}.

  2. Set up the mass percent expression: Mass percent=(126.112 g/mol246.482 g/mol)×100%\text{Mass percent} = \left(\frac{126.112\text{ g/mol}}{246.482\text{ g/mol}}\right) \times 100\%.

  3. Compute and round to four significant figures: 51.17%51.17\%.

Final answer

51.17%51.17\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the general formula for mass percent of water in hydrates: ensure the coefficient nn appears in the numerator.

  • Perform a quick sanity check: hydrates with high water ratios (such as heptahydrates) often consist of roughly 40%–60%40\%\text{--}60\% water by mass, so a value under 10%10\% should immediately prompt a check for a missing coefficient.

OverviewACEpath Teacher's Diagnosis

02 The student divides the mass of water by the molar mass of anhydrous magnesium sulfate rather than the total molar mass of the hydrate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Mass of water=7×(2(1.008)+16.00)=126.112 g/mol\text{Mass of water} = 7 \times (2(1.008) + 16.00) = 126.112\text{ g/mol}

  2. Step 2

    Molar mass of MgSO4=24.31+32.06+64.00=120.37 g/mol\text{Molar mass of } \text{MgSO}_4 = 24.31 + 32.06 + 64.00 = 120.37\text{ g/mol}

  3. Step 3

    Mass percent of water=(126.112120.37)×100%=104.8%\text{Mass percent of water} = \left(\frac{126.112}{120.37}\right) \times 100\% = 104.8\%

    Correct

    Mass percent of water=(126.112 g/mol120.37 g/mol+126.112 g/mol)×100%=(126.112246.482)×100%≈51.17%\text{Mass percent of water} = \left(\frac{126.112\text{ g/mol}}{120.37\text{ g/mol} + 126.112\text{ g/mol}}\right) \times 100\% = \left(\frac{126.112}{246.482}\right) \times 100\% \approx 51.17\%

    You divided by the mass of the anhydrous salt alone (120.37 g/mol120.37\text{ g/mol}) instead of the total mass of the hydrate (246.48 g/mol246.48\text{ g/mol}). A mass percent represents a part over the whole compound, which must include the water molecules.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the combined molar mass of the seven water molecules.

You correctly determined the molar mass of anhydrous magnesium sulfate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect denominator in hydrate mass percent

No, this is a conceptual error regarding what constitutes the 'whole' compound in a hydrate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the anhydrous salt MgSO4\text{MgSO}_4 as the total sample mass rather than including the water of hydration in the denominator. In a hydrated crystal, the water molecules are part of the crystal lattice, so the total molar mass is Mass of anhydrous salt+Mass of water\text{Mass of anhydrous salt} + \text{Mass of water}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Part vs. Whole Definition
  • Mass %=(Mass of componentTotal mass of compound)×100%\text{Mass \%} = \left(\frac{\text{Mass of component}}{\text{Total mass of compound}}\right) \times 100\%

  • Always verify that the denominator includes all components of the formula, including the water of crystallization.

Reality Check on Percentages
  • The mass percent of any single component in a stable compound can never exceed 100%100\%.

  • If your calculated mass percent is greater than 100%100\%, immediately check whether you forgot to add all parts into the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total molar mass of the hydrate: Total molar mass=120.37 g/mol+126.112 g/mol=246.482 g/mol\text{Total molar mass} = 120.37\text{ g/mol} + 126.112\text{ g/mol} = 246.482\text{ g/mol}.

  2. Divide the mass of water by the total hydrate mass: Mass %=(126.112 g/mol246.482 g/mol)×100%\text{Mass \%} = \left(\frac{126.112\text{ g/mol}}{246.482\text{ g/mol}}\right) \times 100\%.

  3. Round to four significant figures: 51.17%51.17\%.

Final answer

51.17%51.17\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember to add the mass of water to the anhydrous salt to get the total molar mass of any hydrate.

  • Use the sanity check: any percentage over 100%100\% signals that the denominator is smaller than the numerator.

OverviewACEpath Teacher's Diagnosis

03 The student omits the four oxygen atoms in the sulfate group when determining the anhydrous salt molar mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Mass of 7H2O=7×18.016=126.112 g/mol\text{Mass of } 7\text{H}_2\text{O} = 7 \times 18.016 = 126.112\text{ g/mol}

  2. Step 2

    Molar mass of MgSO4=24.31+32.06=56.37 g/mol\text{Molar mass of } \text{MgSO}_4 = 24.31 + 32.06 = 56.37\text{ g/mol}

    Correct

    Molar mass of MgSO4=24.31+32.06+4(16.00)=120.37 g/mol\text{Molar mass of } \text{MgSO}_4 = 24.31 + 32.06 + 4(16.00) = 120.37\text{ g/mol}

    You omitted the four oxygen atoms from the sulfate anion (SO42−\text{SO}_4^{2-}). Remember to include 4×16.00 g/mol=64.00 g/mol4 \times 16.00\text{ g/mol} = 64.00\text{ g/mol} for the oxygen component.

  3. Step 3

    Total molar mass=56.37+126.112=182.482 g/mol\text{Total molar mass} = 56.37 + 126.112 = 182.482\text{ g/mol}

    Correct

    Total molar mass=120.37+126.112=246.482 g/mol\text{Total molar mass} = 120.37 + 126.112 = 246.482\text{ g/mol} (or 246.51 g/mol246.51\text{ g/mol})

    Your method of summing the anhydrous salt mass and the water mass was correct, but the result is affected by the missing oxygen mass from the previous step.

  4. Step 4

    Mass percent of water=(126.112182.482)×100%=69.11%\text{Mass percent of water} = \left(\frac{126.112}{182.482}\right) \times 100\% = 69.11\%

    Correct

    Mass percent of water=(126.112246.482)×100%=51.17%\text{Mass percent of water} = \left(\frac{126.112}{246.482}\right) \times 100\% = 51.17\%

    You applied the mass percent formula correctly and rounded appropriately, but the final numerical value is incorrect due to the propagated error from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the molar mass of the water component (7H2O7\text{H}_2\text{O}).

You correctly understood that the hydrate's total mass is the sum of the anhydrous salt and the water of crystallization.

You set up and evaluated the mass percent fraction using the correct ratio of water mass to total mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Polyatomic Subscripts

You added the atomic masses of magnesium and sulfur but overlooked the subscript 44 on oxygen in MgSO4\text{MgSO}_4.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete inventory of constituent elements when parsing a chemical formula containing polyatomic ions, leading to omitted subscript quantities during molar mass summation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inventory Every Element and Subscript
  • Every element symbol in a chemical formula must be paired with its subscript: MgSO4\text{MgSO}_4 consists of 1 Mg1\text{ Mg}, 1 S1\text{ S}, and 4 O4\text{ O}.

  • Write out a checklist of each element, its atom count, and its atomic mass before computing the total sum.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Molar mass of MgSO4=24.31+32.06+4(16.00)=120.37 g/mol\text{Molar mass of } \text{MgSO}_4 = 24.31 + 32.06 + 4(16.00) = 120.37\text{ g/mol}

  2. Total molar mass of MgSO4⋅7H2O=120.37+126.112=246.482 g/mol\text{Total molar mass of } \text{MgSO}_4 \cdot 7\text{H}_2\text{O} = 120.37 + 126.112 = 246.482\text{ g/mol}

  3. Mass percent of H2O=(126.112 g/mol246.482 g/mol)×100%≈51.1646%≈51.17%\text{Mass percent of } \text{H}_2\text{O} = \left(\frac{126.112\text{ g/mol}}{246.482\text{ g/mol}}\right) \times 100\% \approx 51.1646\% \approx 51.17\%

Final answer

51.17%51.17\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Before adding molar masses, write out each element's count explicitly (for example, Mg×1\text{Mg} \times 1, S×1\text{S} \times 1, O×4\text{O} \times 4).

  • Perform a quick sanity check on hydrate mass percentages: for salts with large polyatomic anions like sulfate, the anhydrous salt usually contributes roughly half or more of the total mass.

Lock it in

Similar question

01

Calculate the mass percent of water in copper(II) sulfate pentahydrate, CuSO4⋅5H2O\text{CuSO}_4 \cdot 5\text{H}_2\text{O}. Given: Cu=63.55 g/mol\text{Cu} = 63.55\text{ g/mol}, S=32.06 g/mol\text{S} = 32.06\text{ g/mol}, O=16.00 g/mol\text{O} = 16.00\text{ g/mol}, and H=1.008 g/mol\text{H} = 1.008\text{ g/mol}. Express your answer to four significant figures.

Answer

36.08%36.08\%. Key steps: M(CuSO4)=159.61 g/molM(\text{CuSO}_4) = 159.61\text{ g/mol}; M(5H2O)=5(18.016)=90.08 g/molM(5\text{H}_2\text{O}) = 5(18.016) = 90.08\text{ g/mol}; Mtotal=249.69 g/molM_{\text{total}} = 249.69\text{ g/mol}; Mass %=90.08249.69×100%=36.08%\text{Mass } \% = \frac{90.08}{249.69} \times 100\% = 36.08\%.

02

A 2.500 g2.500\text{ g} sample of washing soda, Na2CO3⋅10H2O\text{Na}_2\text{CO}_3 \cdot 10\text{H}_2\text{O}, is heated until all water of hydration is driven off. What mass of anhydrous Na2CO3\text{Na}_2\text{CO}_3 remains? (Molar masses: Na2CO3=105.99 g/mol\text{Na}_2\text{CO}_3 = 105.99\text{ g/mol}, H2O=18.016 g/mol\text{H}_2\text{O} = 18.016\text{ g/mol}). Express your answer to four significant figures.

Answer

0.9260 g0.9260\text{ g}. Key steps: Mtotal=105.99+10(18.016)=286.15 g/molM_{\text{total}} = 105.99 + 10(18.016) = 286.15\text{ g/mol}; Mass fraction of Na2CO3=105.99286.15≈0.3704\text{Mass fraction of } \text{Na}_2\text{CO}_3 = \frac{105.99}{286.15} \approx 0.3704; Remaining mass =2.500 g×0.3704=0.9260 g= 2.500\text{ g} \times 0.3704 = 0.9260\text{ g}.

03

A student heats 4.99 g4.99\text{ g} of a hydrated cobalt chloride salt, CoCl2⋅nH2O\text{CoCl}_2 \cdot n\text{H}_2\text{O}, leaving 2.73 g2.73\text{ g} of anhydrous CoCl2\text{CoCl}_2. Given molar masses CoCl2=129.84 g/mol\text{CoCl}_2 = 129.84\text{ g/mol} and H2O=18.02 g/mol\text{H}_2\text{O} = 18.02\text{ g/mol}, determine the integer value of nn.

Answer

n=6n = 6. Key steps: Mass of H2O=4.99 g−2.73 g=2.26 g\text{Mass of } \text{H}_2\text{O} = 4.99\text{ g} - 2.73\text{ g} = 2.26\text{ g}; n(CoCl2)=2.73129.84=0.02102 moln(\text{CoCl}_2) = \frac{2.73}{129.84} = 0.02102\text{ mol}; n(H2O)=2.2618.02=0.1254 moln(\text{H}_2\text{O}) = \frac{2.26}{18.02} = 0.1254\text{ mol}; ratio n=0.12540.02102≈5.97≈6n = \frac{0.1254}{0.02102} \approx 5.97 \approx 6.

Loading workspace…