Resources

An electric resistance heater transfers 850 J850\text{ J} of electrical energy into a gas enclosed in a piston-cylinder assembly. Concurrently, the gas expands from 1.50 L1.50\text{ L} to 4.20 L4.20\text{ L} against an ambient external pressure of 1.00 atm1.00\text{ atm}. A student applying the first law writes ΔU=q−w\Delta U = q - w while taking work as positive for expansion, whereas standard IUPAC convention defines ΔU=q+w\Delta U = q + w with w=−PextΔVw = -P_{\text{ext}}\Delta V. Avoid the sign convention trap by clearly stating the sign and numerical value of the heat transferred to the gas qq, the work done on the gas ww, and the net change in internal energy ΔU\Delta U (all in J\text{J}) according to IUPAC conventions. (1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J})

Answer and steps

Final answer

q=+850 Jq = +850\text{ J}, w=−274 Jw = -274\text{ J}, ΔU=+576 J\Delta U = +576\text{ J}

Steps

01

Determine the heat transferred to the gas (qq)

To determine the values of qq, ww, and ΔU\Delta U using the standard IUPAC convention, we track energy transfers from the perspective of the system (the gas):

  • Energy added to the system increases its internal energy and has a positive sign.
  • The electric resistance heater transfers 850 J850\text{ J} of energy into the gas, so: q=+850 Jq = +850\text{ J}
02

Calculate the expansion work done on the gas (ww)

  • Under the IUPAC convention, work done on the system increases its energy (w>0w > 0), while work done by the system (such as during expansion against an external pressure) decreases its energy (w<0w < 0).
  • The formula for pressure-volume work is: w=−PextΔVw = -P_{\text{ext}}\Delta V
  • Find the volume change ΔV\Delta V: ΔV=Vfinal−Vinitial=4.20 L−1.50 L=+2.70 L\Delta V = V_{\text{final}} - V_{\text{initial}} = 4.20\text{ L} - 1.50\text{ L} = +2.70\text{ L}
  • Calculate work in L⋅atm\text{L}\cdot\text{atm}: w=−(1.00 atm)(+2.70 L)=−2.70 L⋅atmw = -(1.00\text{ atm})(+2.70\text{ L}) = -2.70\text{ L}\cdot\text{atm}
  • Convert to Joules using 1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J}: w=−2.70 L⋅atm×101.325 J/(L⋅atm)≈−273.58 J≈−274 Jw = -2.70\text{ L}\cdot\text{atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm}) \approx -273.58\text{ J} \approx -274\text{ J}
03

Calculate the net change in internal energy (ΔU\Delta U)

  • According to the First Law of Thermodynamics: ΔU=q+w\Delta U = q + w
  • Substitute the values of qq and ww: ΔU=+850 J+(−274 J)=+576 J\Delta U = +850\text{ J} + (-274\text{ J}) = +576\text{ J}

Common Pitfall

A common source of error is mixing conventions: if defining work done by the system as wby=+PextΔVw_{\text{by}} = +P_{\text{ext}}\Delta V, the first law must be written as ΔU=q−wby\Delta U = q - w_{\text{by}}. Under the standard IUPAC convention, work is defined on the system (w=−PextΔVw = -P_{\text{ext}}\Delta V), and the first law is always ΔU=q+w\Delta U = q + w. Both methods yield the identical physical result: ΔU=+576 J\Delta U = +576\text{ J}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the IUPAC work sign convention and assigns a positive value to work done on the gas during expansion, resulting in an incorrect sign for w and an overestimate of ΔU.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Heat enters system: q=+850 J\text{Heat enters system: } q = +850\text{ J}

  2. Step 2

    ΔV=4.20 L−1.50 L=2.70 L  ⟹  w=Pext×ΔV=1.00 atm×2.70 L=2.70 L⋅atm  ⟹  w=2.70×101.325 J=+273.6 J\Delta V = 4.20\text{ L} - 1.50\text{ L} = 2.70\text{ L} \implies w = P_{\text{ext}} \times \Delta V = 1.00\text{ atm} \times 2.70\text{ L} = 2.70\text{ L}\cdot\text{atm} \implies w = 2.70 \times 101.325\text{ J} = +273.6\text{ J}

    Correct

    w=−PextΔV=−(1.00 atm)(2.70 L)=−2.70 L⋅atm≈−274 Jw = -P_{\text{ext}}\Delta V = -(1.00\text{ atm})(2.70\text{ L}) = -2.70\text{ L}\cdot\text{atm} \approx -274\text{ J}

    In standard IUPAC thermodynamic convention, work done on the system is defined as w=−PextΔVw = -P_{\text{ext}}\Delta V. Because the gas expands (ΔV>0\Delta V > 0), the gas does work on the surroundings and loses energy, meaning ww must be negative (−274 J-274\text{ J}).

  3. Step 3

    ΔU=q+w=850 J+273.6 J=+1123.6 J\Delta U = q + w = 850\text{ J} + 273.6\text{ J} = +1123.6\text{ J}

    Correct

    ΔU=q+w=850 J+(−274 J)=+576 J\Delta U = q + w = 850\text{ J} + (-274\text{ J}) = +576\text{ J}

    Your First Law formulation ΔU=q+w\Delta U = q + w is correct, but substituting the incorrect positive value of ww led to an incorrect value for ΔU\Delta U.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly assigned a positive sign to heat absorbed by the system (q=+850 Jq = +850\text{ J}).

You correctly calculated the volume change ΔV=+2.70 L\Delta V = +2.70\text{ L}.

You properly converted units from L⋅atm\text{L}\cdot\text{atm} to Joules using 101.325 J/(L⋅atm)101.325\text{ J}/(\text{L}\cdot\text{atm}).

You used the standard IUPAC First Law equation ΔU=q+w\Delta U = q + w.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
IUPAC Work Sign Convention Trap

You used the positive formula w=PextΔVw = P_{\text{ext}}\Delta V rather than the IUPAC convention formula w=−PextΔVw = -P_{\text{ext}}\Delta V.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the physics/engineering convention where work done by the system is positive (wby=PΔVw_{\text{by}} = P\Delta V, ΔU=q−w\Delta U = q - w) with the IUPAC chemical convention where all energy transfers are defined from the perspective of the system (w=−PextΔVw = -P_{\text{ext}}\Delta V, ΔU=q+w\Delta U = q + w).

REASONING PATH
Your ACEpath teacher’s suggested approach
IUPAC Work Definition
  • Under IUPAC convention, w=−PextΔVw = -P_{\text{ext}}\Delta V.

  • Always include the leading negative sign when calculating P-VP\text{-}V work done on a system.

Physical Sign Check for Work
  • Expansion (ΔV>0\Delta V > 0) pushes surroundings back   ⟹  \implies system loses energy   ⟹  w<0\implies w < 0. Compression (ΔV<0\Delta V < 0) compresses system   ⟹  \implies surroundings add energy   ⟹  w>0\implies w > 0.

  • Before adding ww to ΔU\Delta U, verify whether the system expanded or contracted to double-check the sign of ww.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the IUPAC definition of work: w=−PextΔVw = -P_{\text{ext}}\Delta V.

  2. Substitute Pext=1.00 atmP_{\text{ext}} = 1.00\text{ atm} and ΔV=4.20 L−1.50 L=+2.70 L\Delta V = 4.20\text{ L} - 1.50\text{ L} = +2.70\text{ L}: w=−(1.00 atm)(+2.70 L)=−2.70 L⋅atmw = -(1.00\text{ atm})(+2.70\text{ L}) = -2.70\text{ L}\cdot\text{atm}.

  3. Convert to Joules: w=−2.70 L⋅atm×101.325 J/(L⋅atm)≈−274 Jw = -2.70\text{ L}\cdot\text{atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm}) \approx -274\text{ J}.

  4. Calculate ΔU\Delta U: ΔU=q+w=+850 J+(−274 J)=+576 J\Delta U = q + w = +850\text{ J} + (-274\text{ J}) = +576\text{ J}.

Final answer

q=+850 Jq = +850\text{ J}, w=−274 Jw = -274\text{ J}, ΔU=+576 J\Delta U = +576\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the IUPAC pairing: always use ΔU=q+w\Delta U = q + w paired with w=−PextΔVw = -P_{\text{ext}}\Delta V.

  • Perform a physical reality check: if a gas expands against external pressure, it spends energy doing work, so internal energy must decrease unless compensated by heat.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert work from liter-atmospheres to joules before adding it to heat, yielding an incorrect numerical value for ΔU.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Heat absorbed by gas: q=+850 J\text{Heat absorbed by gas: } q = +850\text{ J}

  2. Step 2

    ΔV=4.20 L−1.50 L=2.70 L  ⟹  w=−PextΔV=−(1.00 atm)×(2.70 L)=−2.70 L⋅atm\Delta V = 4.20\text{ L} - 1.50\text{ L} = 2.70\text{ L} \implies w = -P_{\text{ext}}\Delta V = -(1.00\text{ atm})\times(2.70\text{ L}) = -2.70\text{ L}\cdot\text{atm}

  3. Step 3

    w=−2.70 Jw = -2.70\text{ J}

    Correct

    w=−2.70 L⋅atm×101.325 J/(L⋅atm)≈−274 Jw = -2.70\text{ L}\cdot\text{atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm}) \approx -274\text{ J}

    You replaced the unit L⋅atm\text{L}\cdot\text{atm} with J\text{J} without multiplying by the conversion factor 101.325 J/(L⋅atm)101.325\text{ J}/(\text{L}\cdot\text{atm}).

  4. Step 4

    ΔU=q+w=850 J+(−2.70 J)=+847.3 J\Delta U = q + w = 850\text{ J} + (-2.70\text{ J}) = +847.3\text{ J}

    Correct

    ΔU=q+w=+850 J+(−274 J)=+576 J\Delta U = q + w = +850\text{ J} + (-274\text{ J}) = +576\text{ J}

    Your First Law formula and arithmetic were correct, but the result was skewed by using unconverted work.

WHAT YOU DID WELL
Compliments from Your Teacher

You assigned the correct positive sign to heat absorbed by the system.

You used the standard IUPAC expression w=−PextΔVw = -P_{\text{ext}}\Delta V with the correct negative sign for expansion work.

You correctly recalled and set up the First Law equation ΔU=q+w\Delta U = q + w.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing unit conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated 1 L⋅atm1\text{ L}\cdot\text{atm} as directly interchangeable with 1 J1\text{ J}, skipping the dimensional conversion factor (1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J}) before combining work with heat.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Work Units
  • Pressure-volume work calculated with PP in atmospheres and VV in liters yields L⋅atm\text{L}\cdot\text{atm}, not Joules.

  • Always multiply the value in L⋅atm\text{L}\cdot\text{atm} by 101.325 J/(L⋅atm)101.325\text{ J}/(\text{L}\cdot\text{atm}) before adding it to energy terms in Joules.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert w=−2.70 L⋅atmw = -2.70\text{ L}\cdot\text{atm} to Joules: w=−2.70 L⋅atm×101.325 J/(L⋅atm)=−273.58 J≈−274 Jw = -2.70\text{ L}\cdot\text{atm} \times 101.325\text{ J}/(\text{L}\cdot\text{atm}) = -273.58\text{ J} \approx -274\text{ J}.

  2. Substitute the converted work into the First Law: ΔU=q+w=+850 J+(−274 J)=+576 J\Delta U = q + w = +850\text{ J} + (-274\text{ J}) = +576\text{ J}.

Final answer

q=+850 Jq = +850\text{ J}, w=−274 Jw = -274\text{ J}, ΔU=+576 J\Delta U = +576\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out units explicitly during intermediate algebra to catch unit mismatches before adding.

  • Remember the key thermodynamic conversion constant: 1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J}.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies heat entering the gas as heat lost by the system, setting q as negative and leading to an incorrect negative change in internal energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    q=−850 Jq = -850\text{ J}

    Correct

    q=+850 Jq = +850\text{ J}

    Energy is transferred into the gas by the heater. Under thermodynamic sign conventions, energy entering the system increases its internal energy and must have a positive sign (q>0q > 0).

  2. Step 2

    ΔV=4.20 L−1.50 L=2.70 L  ⟹  w=−Pext⋅ΔV=−(1.00 atm)⋅(2.70 L)  ⟹  w=−2.70⋅101.325 J=−273.6 J\Delta V = 4.20\text{ L} - 1.50\text{ L} = 2.70\text{ L} \implies w = -P_{\text{ext}} \cdot \Delta V = -(1.00\text{ atm}) \cdot (2.70\text{ L}) \implies w = -2.70 \cdot 101.325\text{ J} = -273.6\text{ J}

  3. Step 3

    ΔU=q+w=−850 J+(−273.6 J)=−1123.6 J\Delta U = q + w = -850\text{ J} + (-273.6\text{ J}) = -1123.6\text{ J}

    Correct

    ΔU=q+w=+850 J+(−274 J)=+576 J\Delta U = q + w = +850\text{ J} + (-274\text{ J}) = +576\text{ J}

    You correctly applied the First Law formula ΔU=q+w\Delta U = q + w, but the result was affected by the incorrect negative sign assigned to qq in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that gas expansion against external pressure means the system does work on the surroundings, leading to a negative value for ww.

You correctly converted pressure-volume units from L⋅atm\text{L}\cdot\text{atm} to Joules using the standard conversion factor.

You correctly set up the First Law equation ΔU=q+w\Delta U = q + w according to the standard IUPAC convention.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error for heat ($q$)

You assigned a negative sign to qq instead of a positive sign when energy was added to the gas.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely viewed the energy transfer from the perspective of the heater (which loses energy) rather than from the perspective of the system (the gas, which absorbs energy). In thermodynamics, all energy transfers must be signed strictly relative to the defined system.

REASONING PATH
Your ACEpath teacher’s suggested approach
System Perspective for Heat ($q$)
  • In thermodynamics, signs are always defined from the system's perspective: q>0q > 0 when heat enters the system (endothermic), and q<0q < 0 when heat leaves the system (exothermic).

  • Before writing qq, identify the system boundary and ask: 'Is energy entering or leaving this system?' If entering, write qq with a positive sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the system as the gas in the cylinder. Since the electric heater delivers energy into the gas, heat enters the system: q=+850 Jq = +850\text{ J}.

  2. Substitute the correct values of q=+850 Jq = +850\text{ J} and w=−274 Jw = -274\text{ J} into the First Law: ΔU=q+w=+850 J+(−274 J)\Delta U = q + w = +850\text{ J} + (-274\text{ J}).

  3. Compute the net change in internal energy: ΔU=+576 J\Delta U = +576\text{ J}.

Final answer

q=+850 Jq = +850\text{ J}, w=−274 Jw = -274\text{ J}, ΔU=+576 J\Delta U = +576\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always explicitly label your defined system (e.g., 'System = gas') at the start of thermodynamic problems.

  • Double-check that all energy transfers directed into the system have positive signs (q>0,w>0q > 0, w > 0) and all energy transfers leaving have negative signs (q<0,w<0q < 0, w < 0).

Lock it in

Similar question

01

A sample of gas absorbs 450 J450\text{ J} of heat from the surroundings while being compressed from 6.00 L6.00\text{ L} to 2.50 L2.50\text{ L} against a constant external pressure of 1.50 atm1.50\text{ atm}. Calculate qq, ww, and ΔU\Delta U in Joules under IUPAC convention (1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J}).

Answer

q=+450 Jq = +450\text{ J}, w=+532 Jw = +532\text{ J}, ΔU=+982 J\Delta U = +982\text{ J}. Key steps: ΔV=2.50−6.00=−3.50 L\Delta V = 2.50 - 6.00 = -3.50\text{ L}. w=−PextΔV=−(1.50 atm)(−3.50 L)=+5.25 L⋅atm=+531.96 J≈+532 Jw = -P_{\text{ext}}\Delta V = -(1.50\text{ atm})(-3.50\text{ L}) = +5.25\text{ L}\cdot\text{atm} = +531.96\text{ J} \approx +532\text{ J}. Heat absorbed means q=+450 Jq = +450\text{ J}. ΔU=q+w=450+532=+982 J\Delta U = q + w = 450 + 532 = +982\text{ J}.

02

An ideal gas releases 620 J620\text{ J} of heat to the surroundings while expanding from 1.00 L1.00\text{ L} to 5.00 L5.00\text{ L} against a constant external pressure of 2.00 atm2.00\text{ atm}. Determine qq, ww, and ΔU\Delta U in Joules (1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J}).

Answer

q=−620 Jq = -620\text{ J}, w=−811 Jw = -811\text{ J}, ΔU=−1431 J\Delta U = -1431\text{ J}. Key steps: Heat released means q=−620 Jq = -620\text{ J}. ΔV=+4.00 L\Delta V = +4.00\text{ L}. w=−(2.00 atm)(+4.00 L)=−8.00 L⋅atm=−8.00×101.325 J≈−811 Jw = -(2.00\text{ atm})(+4.00\text{ L}) = -8.00\text{ L}\cdot\text{atm} = -8.00 \times 101.325\text{ J} \approx -811\text{ J}. ΔU=q+w=−620+(−811)=−1431 J\Delta U = q + w = -620 + (-811) = -1431\text{ J}.

03

A cylinder fitted with a movable piston contains gas that undergoes a two-step process: (1) It expands from 2.00 L2.00\text{ L} to 4.00 L4.00\text{ L} at constant Pext=1.20 atmP_{\text{ext}} = 1.20\text{ atm} while absorbing 350 J350\text{ J} of heat; (2) It is then cooled at constant volume, releasing 180 J180\text{ J} of heat. Calculate the total work wtotalw_{\text{total}} and total change in internal energy ΔUtotal\Delta U_{\text{total}} in Joules.

Answer

wtotal=−243 Jw_{\text{total}} = -243\text{ J}, ΔUtotal=−73 J\Delta U_{\text{total}} = -73\text{ J}. Key steps: For step 1, w1=−(1.20 atm)(2.00 L)=−2.40 L⋅atm=−243.18 J≈−243 Jw_1 = -(1.20\text{ atm})(2.00\text{ L}) = -2.40\text{ L}\cdot\text{atm} = -243.18\text{ J} \approx -243\text{ J}, q1=+350 Jq_1 = +350\text{ J}. For step 2, ΔV2=0  ⟹  w2=0 J\Delta V_2 = 0 \implies w_2 = 0\text{ J}, q2=−180 Jq_2 = -180\text{ J}. Thus wtotal=−243 Jw_{\text{total}} = -243\text{ J}, qtotal=+350−180=+170 Jq_{\text{total}} = +350 - 180 = +170\text{ J}, and ΔUtotal=qtotal+wtotal=170−243=−73 J\Delta U_{\text{total}} = q_{\text{total}} + w_{\text{total}} = 170 - 243 = -73\text{ J}.

Loading workspace…