Resources

A two-step reaction proceeds via the mechanism: (1) A→I\text{A} \rightarrow \text{I} followed by (2) I→B\text{I} \rightarrow \text{B}, where I\text{I} is a reaction intermediate. The potential energy levels along the reaction coordinate are: reactants A\text{A} at 30.0 kJ/mol30.0\text{ kJ/mol}, first transition state (TS1\text{TS}_1) at 115.0 kJ/mol115.0\text{ kJ/mol}, intermediate I\text{I} at 65.0 kJ/mol65.0\text{ kJ/mol}, second transition state (TS2\text{TS}_2) at 95.0 kJ/mol95.0\text{ kJ/mol}, and final products B\text{B} at 10.0 kJ/mol10.0\text{ kJ/mol}. (a) Calculate the activation energy for each elementary forward step (Ea, 1E_{\text{a, 1}} and Ea, 2E_{\text{a, 2}}). (b) Identify the rate-determining step (RDS) for the forward mechanism and justify your choice. (c) Calculate the overall enthalpy change ΔHoverall\Delta H_{\text{overall}} for converting A\text{A} to B\text{B}.

Answer and steps

Final answer

(a) Ea, 1=85.0 kJ/molE_{\text{a, 1}} = 85.0\text{ kJ/mol}, Ea, 2=30.0 kJ/molE_{\text{a, 2}} = 30.0\text{ kJ/mol}; (b) Step 1 is the rate-determining step because it possesses the larger forward activation barrier (85.0 kJ/mol>30.0 kJ/mol85.0\text{ kJ/mol} > 30.0\text{ kJ/mol}); (c) ΔHoverall=−20.0 kJ/mol\Delta H_{\text{overall}} = -20.0\text{ kJ/mol}.

Steps

Part (a): Activation Energy of Each Elementary Step

The activation energy (EaE_{\text{a}}) for a forward elementary step is the difference in potential energy between the transition state of that step and the starting state immediately preceding it:

Ea=Etransition state−Estarting materialE_{\text{a}} = E_{\text{transition state}} - E_{\text{starting material}}

  1. For Step 1 (A→I\ce{A -> I}): The reaction starts from reactant A\ce{A} and proceeds through the first transition state (TS1\text{TS}_1). Ea, 1=E(TS1)−E(A)E_{\text{a, 1}} = E(\text{TS}_1) - E(\ce{A}) Ea, 1=115.0 kJ/mol−30.0 kJ/mol=85.0 kJ/molE_{\text{a, 1}} = 115.0\text{ kJ/mol} - 30.0\text{ kJ/mol} = 85.0\text{ kJ/mol}
  2. For Step 2 (I→B\ce{I -> B}): The starting point for this step is intermediate I\ce{I}, and it proceeds through the second transition state (TS2\text{TS}_2). Ea, 2=E(TS2)−E(I)E_{\text{a, 2}} = E(\text{TS}_2) - E(\ce{I}) Ea, 2=95.0 kJ/mol−65.0 kJ/mol=30.0 kJ/molE_{\text{a, 2}} = 95.0\text{ kJ/mol} - 65.0\text{ kJ/mol} = 30.0\text{ kJ/mol}

Common Pitfall: Do not calculate Ea, 2E_{\text{a, 2}} by subtracting the original reactant energy E(A)E(\ce{A}) from E(TS2)E(\text{TS}_2). Each elementary step's activation barrier is referenced from its own immediate local minimum (the intermediate I\ce{I}).


Part (b): Identifying the Rate-Determining Step (RDS)

The rate-determining step (RDS) is the slowest elementary step in the reaction mechanism, which controls the overall rate.

According to transition state theory and the Arrhenius relation, the step with the highest forward activation energy barrier has the smallest rate constant and proceeds the slowest:

  • Step 1: Ea, 1=85.0 kJ/molE_{\text{a, 1}} = 85.0\text{ kJ/mol}
  • Step 2: Ea, 2=30.0 kJ/molE_{\text{a, 2}} = 30.0\text{ kJ/mol}

Because Ea, 1>Ea, 2E_{\text{a, 1}} > E_{\text{a, 2}} (85.0 kJ/mol>30.0 kJ/mol85.0\text{ kJ/mol} > 30.0\text{ kJ/mol}), Step 1 is the rate-determining step.


Part (c): Overall Enthalpy Change (ΔHoverall\Delta H_{\text{overall}})

The overall enthalpy change depends only on the difference in potential energy between the final products (B\ce{B}) and the initial reactants (A\ce{A}), as enthalpy is a state function:

ΔHoverall=E(B)−E(A)\Delta H_{\text{overall}} = E(\ce{B}) - E(\ce{A})

ΔHoverall=10.0 kJ/mol−30.0 kJ/mol=−20.0 kJ/mol\Delta H_{\text{overall}} = 10.0\text{ kJ/mol} - 30.0\text{ kJ/mol} = -20.0\text{ kJ/mol}

The negative sign confirms that the overall transformation A→B\ce{A -> B} is exothermic by 20.0 kJ/mol20.0\text{ kJ/mol}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the activation energy of the second step relative to the initial reactants A instead of intermediate I, leading to an incorrect Ea,2 and incorrect RDS reasoning.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ea, 1=115.0−30.0=85.0 kJ/molE_{\text{a, 1}} = 115.0 - 30.0 = 85.0\text{ kJ/mol}

  2. Step 2

    Ea, 2=95.0−30.0=65.0 kJ/molE_{\text{a, 2}} = 95.0 - 30.0 = 65.0\text{ kJ/mol}

    Correct

    Ea, 2=E(TS2)−E(I)=95.0 kJ/mol−65.0 kJ/mol=30.0 kJ/molE_{\text{a, 2}} = E(\text{TS}_2) - E(\text{I}) = 95.0\text{ kJ/mol} - 65.0\text{ kJ/mol} = 30.0\text{ kJ/mol}

    You subtracted the energy of the initial reactant A\text{A} (30.0 kJ/mol30.0\text{ kJ/mol}) instead of the local intermediate I\text{I} (65.0 kJ/mol65.0\text{ kJ/mol}). Each elementary step's activation energy must be measured starting from its immediate preceding valley (starting material).

  3. Step 3

    Step 1 is the rate-determining step because it has a larger activation barrier of 85.0 kJ/mol compared to 65.0 kJ/mol.\text{Step 1 is the rate-determining step because it has a larger activation barrier of } 85.0\text{ kJ/mol} \text{ compared to } 65.0\text{ kJ/mol}.

    Correct

    Step 1 is the rate-determining step because Ea, 1=85.0 kJ/mol>Ea, 2=30.0 kJ/mol.\text{Step 1 is the rate-determining step because } E_{\text{a, 1}} = 85.0\text{ kJ/mol} > E_{\text{a, 2}} = 30.0\text{ kJ/mol}.

    Your identification of Step 1 as the rate-determining step is correct, and your logic that the step with the highest barrier is rate-limiting is sound. However, your comparison cited your incorrect value of 65.0 kJ/mol65.0\text{ kJ/mol} rather than the true barrier of 30.0 kJ/mol30.0\text{ kJ/mol}.

  4. Step 4

    ΔHoverall=10.0−30.0=−20.0 kJ/mol\Delta H_{\text{overall}} = 10.0 - 30.0 = -20.0\text{ kJ/mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the activation barrier Ea, 1E_{\text{a, 1}} for the first elementary step.

You correctly identified that the elementary step with the largest forward activation energy governs the overall reaction rate.

You correctly applied the state function property of enthalpy to compute ΔHoverall=E(products)−E(reactants)\Delta H_{\text{overall}} = E(\text{products}) - E(\text{reactants}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect activation energy reference state in multi-step mechanism

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the global initial reactant energy as the baseline reference for every subsequent elementary step, rather than referencing each elementary step's activation barrier from its own immediate local minimum (the intermediate).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference State for Elementary Activation Energies
  • For any forward elementary step X→Y\text{X} \rightarrow \text{Y} via transition state TS\text{TS}, Ea=E(TS)−E(X)E_{\text{a}} = E(\text{TS}) - E(\text{X}).

  • Always measure the barrier height upward from the local valley immediately preceding that specific peak, not from the beginning of the entire reaction coordinate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the starting species for elementary Step 2 (I→B\text{I} \rightarrow \text{B}), which is intermediate I\text{I} at 65.0 kJ/mol65.0\text{ kJ/mol}.

  2. Calculate Ea, 2=E(TS2)−E(I)=95.0 kJ/mol−65.0 kJ/mol=30.0 kJ/molE_{\text{a, 2}} = E(\text{TS}_2) - E(\text{I}) = 95.0\text{ kJ/mol} - 65.0\text{ kJ/mol} = 30.0\text{ kJ/mol}.

  3. Compare the two true elementary barriers: Ea, 1=85.0 kJ/molE_{\text{a, 1}} = 85.0\text{ kJ/mol} and Ea, 2=30.0 kJ/molE_{\text{a, 2}} = 30.0\text{ kJ/mol}.

  4. Conclude that Step 1 is the rate-determining step because 85.0 kJ/mol>30.0 kJ/mol85.0\text{ kJ/mol} > 30.0\text{ kJ/mol}.

Final answer

(a) Ea, 1=85.0 kJ/molE_{\text{a, 1}} = 85.0\text{ kJ/mol}, Ea, 2=30.0 kJ/molE_{\text{a, 2}} = 30.0\text{ kJ/mol}; (b) Step 1 is the rate-determining step because it has the larger forward activation barrier (85.0 kJ/mol>30.0 kJ/mol85.0\text{ kJ/mol} > 30.0\text{ kJ/mol}); (c) ΔHoverall=−20.0 kJ/mol\Delta H_{\text{overall}} = -20.0\text{ kJ/mol}.

NEXT STEPS
Final Takeaways from Your Teacher
  • On multi-step reaction coordinate diagrams, draw vertical arrows for each elementary step's EaE_{\text{a}} starting directly at that step's local trough.

  • Practice distinguishing overall thermodynamic changes (which compare final products to initial reactants) from individual kinetic barriers (which depend only on the immediate elementary transition state and local reactant).

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the rate-determining step by choosing the step with the highest transition state peak on the absolute energy scale rather than the largest individual activation barrier.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ea, 1=115.0−30.0=85.0 kJ/mol  ⟹  Ea, 2=95.0−65.0=30.0 kJ/molE_{\text{a, 1}} = 115.0 - 30.0 = 85.0\text{ kJ/mol} \implies E_{\text{a, 2}} = 95.0 - 65.0 = 30.0\text{ kJ/mol}

  2. Step 2

    Step 1 is the rate-determining step because TS1 has the highest potential energy at 115.0 kJ/mol.\text{Step 1 is the rate-determining step because TS1 has the highest potential energy at } 115.0\text{ kJ/mol.}

    Correct

    Step 1 is the rate-determining step because Ea, 1>Ea, 2 (85.0 kJ/mol>30.0 kJ/mol).\text{Step 1 is the rate-determining step because } E_{\text{a, 1}} > E_{\text{a, 2}} \text{ (}85.0\text{ kJ/mol} > 30.0\text{ kJ/mol}\text{).}

    While you named the correct step, your reasoning is flawed. The rate-determining step (RDS) is governed by the step with the largest activation energy barrier (EaE_{\text{a}}), not simply the transition state with the highest absolute potential energy.

  3. Step 3

    ΔHoverall=10.0−30.0=−20.0 kJ/mol\Delta H_{\text{overall}} = 10.0 - 30.0 = -20.0\text{ kJ/mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the activation energy for each elementary step.

You correctly determined the overall reaction enthalpy change from the initial reactants to the final products.

You identified Step 1 as the rate-determining step.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Justifying RDS by absolute transition state height

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You determined the rate-determining step by looking for the peak with the highest absolute potential energy on the vertical axis instead of comparing the local activation energy barriers (Ea=ETS−Epreceding minimumE_{\text{a}} = E_{\text{TS}} - E_{\text{preceding minimum}}). Although both point to Step 1 in this specific profile, this logic will fail whenever an intermediate sits at a high energy and a subsequent lower-peak step actually has a larger local barrier.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rate-Determining Step Rule
  • The rate-determining step (RDS) of a multi-step forward mechanism is the elementary step with the largest forward activation energy barrier (EaE_{\text{a}}), which corresponds to the smallest rate constant (kk).

  • Compare Ea, 1E_{\text{a, 1}} and Ea, 2E_{\text{a, 2}}, not the absolute energies of TS1\text{TS}_1 and TS2\text{TS}_2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the activation energy calculated for each individual elementary step: Ea, 1=85.0 kJ/molE_{\text{a, 1}} = 85.0\text{ kJ/mol} and Ea, 2=30.0 kJ/molE_{\text{a, 2}} = 30.0\text{ kJ/mol}.

  2. Since Ea, 1>Ea, 2E_{\text{a, 1}} > E_{\text{a, 2}}, Step 1 has the largest activation energy barrier and the smallest rate constant, making it the rate-determining step.

Final answer

Step 1 is the rate-determining step because it has the largest activation energy barrier (Ea, 1=85.0 kJ/mol>Ea, 2=30.0 kJ/molE_{\text{a, 1}} = 85.0\text{ kJ/mol} > E_{\text{a, 2}} = 30.0\text{ kJ/mol}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Always justify the rate-determining step by explicitly comparing individual EaE_{\text{a}} values rather than absolute transition state peak energies.

  • Practice drawing vertical double-headed arrows from each local well to its transition state peak to visually anchor EaE_{\text{a}} as a height difference.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts product energy from reactant energy instead of final minus initial, obtaining the incorrect sign for the overall enthalpy change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ea, 1=115.0−30.0=85.0 kJ/mol  ⟹  Ea, 2=95.0−65.0=30.0 kJ/molE_{\text{a, 1}} = 115.0 - 30.0 = 85.0\text{ kJ/mol} \implies E_{\text{a, 2}} = 95.0 - 65.0 = 30.0\text{ kJ/mol}

  2. Step 2

    Step 1 is the rate-determining step because Ea, 1 (85.0 kJ/mol)>Ea, 2 (30.0 kJ/mol)E_{\text{a, 1}}\ (85.0\text{ kJ/mol}) > E_{\text{a, 2}}\ (30.0\text{ kJ/mol}).

  3. Step 3

    ΔHoverall=E(reactants)−E(products)  ⟹  ΔHoverall=30.0−10.0=+20.0 kJ/mol\Delta H_{\text{overall}} = E(\text{reactants}) - E(\text{products}) \implies \Delta H_{\text{overall}} = 30.0 - 10.0 = +20.0\text{ kJ/mol}

    Correct

    ΔHoverall=E(products)−E(reactants)=10.0−30.0=−20.0 kJ/mol\Delta H_{\text{overall}} = E(\text{products}) - E(\text{reactants}) = 10.0 - 30.0 = -20.0\text{ kJ/mol}

    Any thermodynamic change Δ\Delta is defined as final state minus initial state (Eproducts−EreactantsE_{\text{products}} - E_{\text{reactants}}). Reversing this order made the reaction appear endothermic (+20.0 kJ/mol+20.0\text{ kJ/mol}) instead of exothermic (−20.0 kJ/mol-20.0\text{ kJ/mol}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the activation energy for each elementary step using its immediate preceding ground state.

You correctly recognized that the elementary step with the larger activation energy acts as the rate-determining step.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Enthalpy Formula Order

You wrote E(reactants)−E(products)E(\text{reactants}) - E(\text{products}) instead of E(products)−E(reactants)E(\text{products}) - E(\text{reactants}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the universal state-function definition of change ("Δ=final−initial""\Delta = \text{final} - \text{initial}") with average bond energy calculations (which use ∑Bonds Broken−∑Bonds Formed\sum \text{Bonds Broken} - \sum \text{Bonds Formed}, or reactants minus products).

REASONING PATH
Your ACEpath teacher’s suggested approach
State Function Sign Convention
  • For any thermodynamic change from potential energy or enthalpy diagrams, ΔH=Hfinal−Hinitial=E(products)−E(reactants)\Delta H = H_{\text{final}} - H_{\text{initial}} = E(\text{products}) - E(\text{reactants}).

  • Always subtract initial reactant energy from final product energy. Check visually: if the product curve ends lower than the reactant curve, ΔH\Delta H must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard definition of reaction enthalpy change: ΔHoverall=E(products)−E(reactants)\Delta H_{\text{overall}} = E(\text{products}) - E(\text{reactants}).

  2. Substitute the given potential energies: ΔHoverall=10.0 kJ/mol−30.0 kJ/mol=−20.0 kJ/mol\Delta H_{\text{overall}} = 10.0\text{ kJ/mol} - 30.0\text{ kJ/mol} = -20.0\text{ kJ/mol}.

Final answer

ΔHoverall=−20.0 kJ/mol\Delta H_{\text{overall}} = -20.0\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between calculating ΔH\Delta H from potential energy levels (final minus initial) versus calculating ΔH\Delta H from bond dissociation energies (reactants minus products).

  • Practice doing a quick visual check on reaction coordinate diagrams: downward overall slope means exothermic (ΔH<0\Delta H < 0), upward overall slope means endothermic (ΔH>0\Delta H > 0).

Lock it in

Similar question

01

A two-step reaction has energy levels: Reactants R=20 kJ/mol\text{R} = 20\text{ kJ/mol}, TS1=70 kJ/mol\text{TS}_1 = 70\text{ kJ/mol}, Intermediate I=45 kJ/mol\text{I} = 45\text{ kJ/mol}, TS2=80 kJ/mol\text{TS}_2 = 80\text{ kJ/mol}, Products P=15 kJ/mol\text{P} = 15\text{ kJ/mol}. Calculate Ea, 1E_{\text{a, 1}} and Ea, 2E_{\text{a, 2}}, and identify the rate-determining step.

Answer

Ea, 1=70−20=50 kJ/molE_{\text{a, 1}} = 70 - 20 = 50\text{ kJ/mol}; Ea, 2=80−45=35 kJ/molE_{\text{a, 2}} = 80 - 45 = 35\text{ kJ/mol}. Step 1 is rate-determining because Ea, 1>Ea, 2E_{\text{a, 1}} > E_{\text{a, 2}} (50 kJ/mol>35 kJ/mol50\text{ kJ/mol} > 35\text{ kJ/mol}).

02

Consider a two-step mechanism where Step 1 is endothermic: A=10 kJ/mol\text{A} = 10\text{ kJ/mol}, TS1=50 kJ/mol\text{TS}_1 = 50\text{ kJ/mol}, Intermediate I=30 kJ/mol\text{I} = 30\text{ kJ/mol}, TS2=85 kJ/mol\text{TS}_2 = 85\text{ kJ/mol}, and Products B=−10 kJ/mol\text{B} = -10\text{ kJ/mol}. (a) Calculate Ea, 1E_{\text{a, 1}} and Ea, 2E_{\text{a, 2}}. (b) Which step is rate-determining? (c) Calculate ΔH\Delta H for Step 1 and ΔHoverall\Delta H_{\text{overall}}.

Answer

(a) Ea, 1=50−10=40 kJ/molE_{\text{a, 1}} = 50 - 10 = 40\text{ kJ/mol}, Ea, 2=85−30=55 kJ/molE_{\text{a, 2}} = 85 - 30 = 55\text{ kJ/mol}. (b) Step 2 is rate-determining (55>40 kJ/mol55 > 40\text{ kJ/mol}). (c) ΔH1=30−10=+20 kJ/mol\Delta H_1 = 30 - 10 = +20\text{ kJ/mol}; ΔHoverall=−10−10=−20 kJ/mol\Delta H_{\text{overall}} = -10 - 10 = -20\text{ kJ/mol}.

03

A three-step reaction coordinate profile has species at energies: Reactant A=25 kJ/mol\text{A} = 25\text{ kJ/mol}, TS1=65 kJ/mol\text{TS}_1 = 65\text{ kJ/mol}, Intermediate I1=40 kJ/mol\text{I}_1 = 40\text{ kJ/mol}, TS2=90 kJ/mol\text{TS}_2 = 90\text{ kJ/mol}, Intermediate I2=30 kJ/mol\text{I}_2 = 30\text{ kJ/mol}, TS3=75 kJ/mol\text{TS}_3 = 75\text{ kJ/mol}, Product D=10 kJ/mol\text{D} = 10\text{ kJ/mol}. Determine the activation energy of each elementary step and state which step controls the overall reaction rate.

Answer

Ea, 1=65−25=40 kJ/molE_{\text{a, 1}} = 65 - 25 = 40\text{ kJ/mol}; Ea, 2=90−40=50 kJ/molE_{\text{a, 2}} = 90 - 40 = 50\text{ kJ/mol}; Ea, 3=75−30=45 kJ/molE_{\text{a, 3}} = 75 - 30 = 45\text{ kJ/mol}. Step 2 is the rate-determining step because it has the largest activation barrier (50 kJ/mol50\text{ kJ/mol}).

Loading workspace…