Resources
A standard high school and introductory college chemistry laboratory experiment determines the molar mass of an unknown volatile organic liquid using the Dumas vapor method. A clean, dry Erlenmeyer flask is capped with aluminum foil containing a microscopic pinhole. The flask assembly has an empty dry mass of . An excess of of the unknown liquid is injected, and the flask is immersed in a boiling water bath at . The liquid completely vaporizes, flushing all atmospheric air out of the pinhole until the interior contains only pure saturated vapor at an atmospheric barometric pressure of . The flask is removed from the bath, cooled to room temperature so the vapor fully condenses, and wiped dry. The mass of the flask assembly plus condensed liquid is . The actual internal volume of the flask, determined by completely filling it with water at (density ), is . Using and , calculate the experimental molar mass of the unknown volatile liquid in grams per mole ().
Answer and steps
Final answer
Steps
Determine the mass of the condensed vapor
To determine the molar mass of the unknown volatile liquid, we use the Ideal Gas Law applied to the vapor that completely filled the flask at the boiling water bath temperature and atmospheric pressure.
When the flask is heated, the liquid vaporizes and flushes out the air until the flask is filled entirely with the unknown vapor. Upon cooling, the vapor condenses back into liquid, and air re-enters the flask. Since both the initial empty assembly and the final assembly contain the flask and the room air filling its interior, the difference in mass gives the mass of the condensed vapor:
Convert experimental conditions to standard units
- Pressure ():
- Volume (): The vapor occupied the entire internal volume of the flask at the high temperature:
- Temperature (): Convert the temperature of the boiling water bath to Kelvin:
Calculate the experimental molar mass
The Ideal Gas Law relates pressure, volume, temperature, and moles:
Rearranging for the molar mass ():
Substitute the values into the equation:
Evaluating the numerator and denominator:
(Common Pitfall: Do not use the nominal flask volume of . Erlenmeyer flasks have approximate graduations; the true internal volume must be measured accurately, as determined here by the water calibration to be .)
Typical errors
01 The student uses the nominal flask volume of 250.0 mL instead of the experimentally calibrated internal volume of 272.4 mL, yielding an overestimated molar mass of 89.1 g/mol.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You used the nominal label volume of the Erlenmeyer flask () instead of the calibrated total internal volume (). Because the vapor expands to fill the entire flask up to the foil cap, you must use the total volume determined by the water calibration.
- Step 4Correct
Your rearrangement and calculation were carried out correctly based on your chosen volume, but the value was skewed by the incorrect volume from Step 3.
WHAT YOU DID WELL
Compliments from Your TeacherYou calculated the mass of the condensed vapor accurately.
You correctly converted both pressure and temperature to appropriate SI/gas law units.
You correctly rearranged the Ideal Gas Law to solve for molar mass as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the nominal flask size instead of the calibrated volume of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked that an Erlenmeyer flask's nominal marking indicates only an approximate liquid capacity below the neck, whereas vapor in the Dumas method fills the entire container up to the foil seal.
REASONING PATH
Your ACEpath teacher’s suggested approach- Vapor Fills the Entire Enclosure
In vapor density experiments, gaseous vapor expands to occupy the total enclosed volume, not the approximate printed line.
Always look for experimental calibration data (such as mass of water required to fill the flask) to find the true volume .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the calibrated volume to liters: .
Substitute into your molar mass formula: .
Evaluate the quotient: .
02 The student substitutes the boiling bath temperature in Celsius directly into the ideal gas equation without converting to Kelvin, yielding an incorrectly low molar mass of 21.8 g/mol.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Gas law calculations require the thermodynamic temperature in Kelvin because the ideal gas equation is based on an absolute temperature scale with zero thermal kinetic energy at .
- Step 4Correct
Your algebraic rearrangement of the ideal gas law was correct, but substituting instead of produced an incorrect final molar mass.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the condensed vapor mass from the difference in weighings.
You correctly identified and used the calibrated true volume () instead of the nominal flask size.
You correctly converted the pressure from to .
You correctly rearranged to solve for molar mass as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the temperature as without converting to Kelvin first.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn the ideal gas equation , the gas constant includes units of . Because the Celsius scale is not an absolute temperature scale, using Celsius directly scales the thermal energy term incorrectly by roughly a factor of in this temperature range.
REASONING PATH
Your ACEpath teacher’s suggested approach- Absolute Temperature Requirement
Every gas law relationship (, Charles's law, Graham's law, etc.) requires absolute temperature in Kelvin.
Always convert temperature immediately using before substituting into gas law formulas.
- Dimensional Analysis with Gas Constant R
The units of the ideal gas constant dictate that temperature must be in to cancel cleanly.
Write out full physical units during substitution to verify that cancels with .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the bath temperature to Kelvin: .
Substitute the absolute temperature along with your correct values into :
Evaluate the numerator: .
Evaluate the denominator: .
Divide to find molar mass: .
03 The student uses room temperature of 20.0 °C (293.15 K) instead of the vapor temperature of 99.2 °C (372.35 K) when calculating moles of gas occupying the flask, resulting in an underestimated molar mass of 64.4 g/mol.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You used , which was the room temperature of the water used solely to calibrate the flask volume. The gas completely filled the flask while submerged in the boiling water bath at , so must be .
- Step 4Correct
Your rearranged Ideal Gas Law formula and arithmetic execution were correct, but substituting the incorrect temperature caused your final molar mass to be underestimated.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly isolated the mass of the condensed vapor.
You properly converted barometric pressure into atmospheres and calibrated volume into liters.
You rearranged the Ideal Gas Law to solve for molar mass correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou selected the room temperature of the calibration liquid () rather than the temperature at which the vapor state actually existed and expanded to fill the container ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify When the Gas State Existed
In gas law problems, , , and must all describe the gas at the exact moment it fills the defined volume.
Ask yourself at what temperature the substance was an expanded vapor filling the flask, rather than looking at room or calibration conditions.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the boiling water bath temperature to Kelvin: .
Substitute the correct temperature into the molar mass equation: .
Calculate the resulting quotient: .
Lock it in
In a Dumas method molar mass experiment, why is the flask's nominal capacity (e.g., ) not used as the gas volume?
The vapor expands to fill the entire brim of the flask under the foil seal, which is significantly larger than the approximate nominal graduation line.
Similar question
A volatile liquid is tested via the Dumas method in a nominal flask. When completely filled with water at (density ), the water has a mass of . What volume (in liters) should be used for the gas calculation?
Answer
.
An unknown vapor sample of mass completely fills a calibrated flask of volume at and . Calculate the molar mass of the liquid ().
Answer
, , . .
A student performing the Dumas method forgets to wipe the outside of the flask dry before weighing the condensed liquid, leaving of water droplets on the outer glass surface. Does this systematic error make the experimental molar mass too high or too low? Explain using the formula .
Answer
Too high. The residual exterior water increases the measured final mass, leading to an artificially high calculated vapor mass (). Since is directly proportional to , the calculated molar mass will be too high.