Resources

A solid calcium carbonate cube of side length L0=1.20 cmL_0 = 1.20\text{ cm} reacts with excess 1.00 M HCl(aq)1.00\text{ M } \text{HCl}(aq) at 298 K298\text{ K}. Because the reaction is strictly surface-limited, the initial rate of CO2\text{CO}_2 evolution is directly proportional to the total external surface area of the solid reactant: Rate=k′′Atotal\text{Rate} = k'' A_{\text{total}}, where k′′=2.50×10−4 mol⋅s−1cm−2k'' = 2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\text{cm}^{-2}. The cube is crushed into N=8.00×103N = 8.00 \times 10^3 identical smaller cubes without any loss of mass. Calculate the new initial rate of gas evolution, Ratecrushed\text{Rate}_{\text{crushed}}, in mol⋅s−1\text{mol}\cdot\text{s}^{-1}.

Answer and steps

Final answer

Ratecrushed=4.32×10−2 mol⋅s−1\text{Rate}_{\text{crushed}} = 4.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}

Steps

01

Determine the dimensions of the smaller cubes

The original cube has side length L0=1.20 cmL_0 = 1.20\text{ cm}, so its total volume is: V0=L03=(1.20 cm)3=1.728 cm3V_0 = L_0^3 = (1.20\text{ cm})^3 = 1.728\text{ cm}^3

When the cube is divided into N=8.00×103N = 8.00 \times 10^3 identical smaller cubes of side length ll without mass loss, the total volume is conserved: Vtotal=N⋅l3=V0V_{\text{total}} = N \cdot l^3 = V_0

Solving for the side length ll of each small cube: l=L0N1/3=1.20 cm(8.00×103)1/3=1.20 cm20=0.0600 cml = \frac{L_0}{N^{1/3}} = \frac{1.20\text{ cm}}{(8.00 \times 10^3)^{1/3}} = \frac{1.20\text{ cm}}{20} = 0.0600\text{ cm}


02

Calculate the new total surface area

The initial surface area of a single cube of side length L0L_0 is: A0=6L02=6(1.20 cm)2=8.64 cm2A_0 = 6 L_0^2 = 6(1.20\text{ cm})^2 = 8.64\text{ cm}^2

The surface area of each smaller cube is: Asmall=6l2=6(0.0600 cm)2=2.16×10−2 cm2A_{\text{small}} = 6 l^2 = 6(0.0600\text{ cm})^2 = 2.16 \times 10^{-2}\text{ cm}^2

The total surface area of all NN smaller cubes is: Atotal=N⋅Asmall=(8.00×103)(2.16×10−2 cm2)=172.8 cm2A_{\text{total}} = N \cdot A_{\text{small}} = (8.00 \times 10^3)(2.16 \times 10^{-2}\text{ cm}^2) = 172.8\text{ cm}^2

Shortcut & Scaling Rule: When a solid of constant volume is divided into NN geometrically similar pieces, the total surface area scales as: Atotal=A0⋅N1/3=8.64 cm2×20=172.8 cm2A_{\text{total}} = A_0 \cdot N^{1/3} = 8.64\text{ cm}^2 \times 20 = 172.8\text{ cm}^2 A common pitfall is to multiply the original surface area directly by NN, forgetting that each individual fragment has a much smaller individual surface area than the original solid.


03

Compute the new initial reaction rate

Using the given rate relationship, Rate=k′′Atotal\text{Rate} = k'' A_{\text{total}}: Ratecrushed=(2.50×10−4 mol⋅s−1⋅cm−2)(172.8 cm2)\text{Rate}_{\text{crushed}} = (2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\cdot\text{cm}^{-2})(172.8\text{ cm}^2)

Ratecrushed=4.32×10−2 mol⋅s−1\text{Rate}_{\text{crushed}} = 4.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student scales the side length linearly with N instead of using the cube root for volume conservation, dividing L₀ directly by N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L1=1.20 cm8000=1.50×10−4 cmL_1 = \frac{1.20\text{ cm}}{8000} = 1.50 \times 10^{-4}\text{ cm}

    Correct

    l=L0N1/3=1.20 cm(8.00×103)1/3=0.0600 cml = \frac{L_0}{N^{1/3}} = \frac{1.20\text{ cm}}{(8.00 \times 10^3)^{1/3}} = 0.0600\text{ cm}

    When a 3D solid is crushed without mass loss, total volume is conserved (V0=Nl3V_0 = N l^3). Therefore, each linear dimension scales with the cube root of the number of pieces (l=L0/N1/3l = L_0 / N^{1/3}), not linearly (L0/NL_0 / N).

  2. Step 2

    Atotal=8000⋅6⋅(1.50×10−4 cm)2=1.08×10−3 cm2A_{\text{total}} = 8000 \cdot 6 \cdot (1.50 \times 10^{-4}\text{ cm})^2 = 1.08 \times 10^{-3}\text{ cm}^2

    Correct

    Atotal=N⋅6l2=(8.00×103)⋅6⋅(0.0600 cm)2=172.8 cm2A_{\text{total}} = N \cdot 6 l^2 = (8.00 \times 10^3) \cdot 6 \cdot (0.0600\text{ cm})^2 = 172.8\text{ cm}^2

    Your formula Atotal=N⋅6l2A_{\text{total}} = N \cdot 6l^2 was set up correctly, but the result was thrown off by the incorrect side length from Step 1. Notice that crushing a solid must always increase total surface area, whereas 1.08×10−3 cm21.08 \times 10^{-3}\text{ cm}^2 is smaller than the original cube's 8.64 cm28.64\text{ cm}^2.

  3. Step 3

    Ratecrushed=(2.50×10−4 mol⋅s−1cm−2)⋅(1.08×10−3 cm2)=2.70×10−7 mol⋅s−1\text{Rate}_{\text{crushed}} = (2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\text{cm}^{-2}) \cdot (1.08 \times 10^{-3}\text{ cm}^2) = 2.70 \times 10^{-7}\text{ mol}\cdot\text{s}^{-1}

    Correct

    Ratecrushed=k′′Atotal=(2.50×10−4 mol⋅s−1cm−2)⋅(172.8 cm2)=4.32×10−2 mol⋅s−1\text{Rate}_{\text{crushed}} = k'' A_{\text{total}} = (2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\text{cm}^{-2}) \cdot (172.8\text{ cm}^2) = 4.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}

    You correctly multiplied the given rate constant k′′k'' by your total surface area, but the numerical answer was affected by the earlier error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the formula A=6l2A = 6l^2 for the surface area of a cube and multiplied by NN to find the total area.

You correctly applied the surface-limited kinetics rate law Rate=k′′Atotal\text{Rate} = k'' A_{\text{total}} with proper unit tracking.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. volumetric scaling error

You divided the side length L0L_0 directly by N=8000N = 8000 as if dividing a 1D line segment into NN parts.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing 1D linear scaling with 3D volumetric scaling when dividing a solid into smaller geometric fragments. Because volume scales as L3L^3, dividing the total volume into NN equal volumes requires taking the cube root of NN to find the side length of each piece.

REASONING PATH
Your ACEpath teacher’s suggested approach
Volume Conservation Check
  • Vtotal=N⋅l3=L03  ⟹  l=L0N1/3V_{\text{total}} = N \cdot l^3 = L_0^3 \implies l = \frac{L_0}{N^{1/3}}

  • Always equate total volume before and after crushing to solve for the new linear dimension before calculating surface area.

Physical Reality Sanity Check
  • Dividing or crushing a solid reactant must always increase the total exposed surface area, thereby increasing the reaction rate.

  • Compare your new total surface area to the original area A0=6L02=8.64 cm2A_0 = 6 L_0^2 = 8.64\text{ cm}^2; if Atotal<A0A_{\text{total}} < A_0, recheck your scaling exponent.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply volume conservation: Vsmall=V0N=(1.20 cm)38.00×103=2.16×10−4 cm3V_{\text{small}} = \frac{V_0}{N} = \frac{(1.20\text{ cm})^3}{8.00 \times 10^3} = 2.16 \times 10^{-4}\text{ cm}^3.

  2. Find the side length of each small cube: l=(2.16×10−4 cm3)1/3=0.0600 cml = (2.16 \times 10^{-4}\text{ cm}^3)^{1/3} = 0.0600\text{ cm}.

  3. Calculate the total surface area: Atotal=N⋅6l2=8000⋅6⋅(0.0600 cm)2=172.8 cm2A_{\text{total}} = N \cdot 6l^2 = 8000 \cdot 6 \cdot (0.0600\text{ cm})^2 = 172.8\text{ cm}^2.

  4. Calculate the new rate: Ratecrushed=(2.50×10−4 mol⋅s−1cm−2)(172.8 cm2)=4.32×10−2 mol⋅s−1\text{Rate}_{\text{crushed}} = (2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\text{cm}^{-2})(172.8\text{ cm}^2) = 4.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}.

Final answer

Ratecrushed=4.32×10−2 mol⋅s−1\text{Rate}_{\text{crushed}} = 4.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice volume-to-length scaling by always writing out V=N⋅l3V = N \cdot l^3 explicitly.

  • Verify that the total surface area after pulverization scales by N1/3N^{1/3} relative to the initial surface area (Anew=A0⋅N1/3A_{\text{new}} = A_0 \cdot N^{1/3}).

OverviewACEpath Teacher's Diagnosis

02 The student assumes total surface area increases by a factor of N rather than N^(1/3), multiplying the original cube's surface area directly by N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    A0=6⋅(1.20 cm)2=8.64 cm2A_0 = 6 \cdot (1.20\text{ cm})^2 = 8.64\text{ cm}^2

  2. Step 2

    Atotal=8000⋅8.64 cm2=69120 cm2A_{\text{total}} = 8000 \cdot 8.64\text{ cm}^2 = 69120\text{ cm}^2

    Correct

    l=L0N1/3=0.0600 cm  ⟹  Atotal=N⋅6l2=A0⋅N1/3=172.8 cm2l = \frac{L_0}{N^{1/3}} = 0.0600\text{ cm} \implies A_{\text{total}} = N \cdot 6l^2 = A_0 \cdot N^{1/3} = 172.8\text{ cm}^2

    You multiplied the original cube's surface area directly by N=8000N = 8000. Because the total volume is conserved, dividing the solid into 80008000 smaller cubes reduces each side length by a factor of 80003=20\sqrt[3]{8000} = 20, which makes the total surface area increase by a factor of N1/3=20N^{1/3} = 20, not NN.

  3. Step 3

    Ratecrushed=(2.50×10−4 mol⋅s−1cm−2)⋅(69120 cm2)=17.28 mol⋅s−1\text{Rate}_{\text{crushed}} = (2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\text{cm}^{-2}) \cdot (69120\text{ cm}^2) = 17.28\text{ mol}\cdot\text{s}^{-1}

    Correct

    Ratecrushed=(2.50×10−4 mol⋅s−1cm−2)(172.8 cm2)=4.32×10−2 mol⋅s−1\text{Rate}_{\text{crushed}} = (2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\text{cm}^{-2})(172.8\text{ cm}^2) = 4.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}

    You evaluated the rate equation correctly using your calculated area, but the numerical answer is incorrect due to the surface area error from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the surface area of the initial cube.

You correctly recognized that the reaction rate is proportional to the total exposed surface area.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Surface area scaling with division

You treated each small fragment as having the full surface area of the original cube.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total count of fragments NN with the surface area multiplication factor. When volume is conserved, fragment side lengths decrease by N1/3N^{1/3}, so total surface area scales as Atotal=A0×N1/3A_{\text{total}} = A_0 \times N^{1/3}, not A0×NA_0 \times N.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conserve Volume Before Finding Area
  • For NN identical cubes formed from one initial cube of volume V0V_0, Vsmall=V0/NV_{\text{small}} = V_0 / N, which means side length l=L0/N1/3l = L_0 / N^{1/3}.

  • Always find the side length of an individual fragment from volume conservation before calculating the total surface area.

Scaling Law Shortcut
  • Total surface area scales as Atotal=A0⋅N1/3A_{\text{total}} = A_0 \cdot N^{1/3} when an object is divided into NN geometrically similar fragments.

  • Multiply the initial surface area by N3\sqrt[3]{N}, never by NN directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the side length of one small cube: l=1.20 cm(8.00×103)1/3=1.20 cm20=0.0600 cml = \frac{1.20\text{ cm}}{(8.00 \times 10^3)^{1/3}} = \frac{1.20\text{ cm}}{20} = 0.0600\text{ cm}.

  2. Calculate total surface area: Atotal=8000×6(0.0600 cm)2=172.8 cm2A_{\text{total}} = 8000 \times 6(0.0600\text{ cm})^2 = 172.8\text{ cm}^2.

  3. Calculate the crushed reaction rate: Ratecrushed=(2.50×10−4 mol⋅s−1cm−2)(172.8 cm2)=4.32×10−2 mol⋅s−1\text{Rate}_{\text{crushed}} = (2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\text{cm}^{-2})(172.8\text{ cm}^2) = 4.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}.

Final answer

4.32×10−2 mol⋅s−14.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how geometric scaling relates volume (L3L^3) and surface area (L2L^2) during subdivision.

  • Practice using the scaling relationship Atotal=A0⋅N1/3A_{\text{total}} = A_0 \cdot N^{1/3} for solid reactants divided into smaller particles.

OverviewACEpath Teacher's Diagnosis

03 The student correctly finds the side length of the smaller cube but calculates the surface area using only one face instead of all six faces of the cubes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L1=1.20 cm(8000)1/3=0.0600 cmL_1 = \frac{1.20\text{ cm}}{(8000)^{1/3}} = 0.0600\text{ cm}

  2. Step 2

    Atotal=8000⋅(0.0600 cm)2=28.8 cm2A_{\text{total}} = 8000 \cdot (0.0600\text{ cm})^2 = 28.8\text{ cm}^2

    Correct

    Atotal=N⋅(6l2)=8000⋅6⋅(0.0600 cm)2=172.8 cm2A_{\text{total}} = N \cdot (6 l^2) = 8000 \cdot 6 \cdot (0.0600\text{ cm})^2 = 172.8\text{ cm}^2

    A cube has 6 external faces, each with area l2l^2. The surface area of each small cube is 6l26l^2, so the total surface area should include a factor of 6.

  3. Step 3

    Ratecrushed=(2.50×10−4 mol⋅s−1cm−2)⋅(28.8 cm2)=7.20×10−3 mol⋅s−1\text{Rate}_{\text{crushed}} = (2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\text{cm}^{-2}) \cdot (28.8\text{ cm}^2) = 7.20 \times 10^{-3}\text{ mol}\cdot\text{s}^{-1}

    Correct

    Ratecrushed=(2.50×10−4 mol⋅s−1cm−2)⋅(172.8 cm2)=4.32×10−2 mol⋅s−1\text{Rate}_{\text{crushed}} = (2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\text{cm}^{-2}) \cdot (172.8\text{ cm}^2) = 4.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}

    You correctly multiplied your calculated surface area by the surface-rate constant k′′k'', but the value was affected by the missing factor of 6 in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the total volume to the number of cubes to find the smaller side length ll.

You correctly used the rate equation Rate=k′′Atotal\text{Rate} = k'' A_{\text{total}} with consistent units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted number of faces in total surface area calculation

You used l2l^2 (the area of a single square face) instead of 6l26l^2 for the surface area of a 3D cube.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the surface area of a 3D polyhedron with the area of a single 2D cross-section or face when summing up particulate surface areas.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Cube Geometry
  • The total surface area of any cube with side length ll is A=6l2A = 6l^2, because it has six congruent square faces.

  • Whenever working with 3D shapes in kinetics, check whether you are using the total 3D surface area (6l26l^2 for cubes, 4πr24\pi r^2 for spheres) rather than a 2D cross-section.

Use the Scaling Shortcut
  • When a solid of initial surface area A0A_0 is divided into NN identical geometrically similar pieces, the new total surface area scales as Atotal=A0⋅N1/3A_{\text{total}} = A_0 \cdot N^{1/3}.

  • Double-check your calculation using Atotal=A0⋅N1/3=6(1.20 cm)2⋅(8000)1/3=8.64 cm2×20=172.8 cm2A_{\text{total}} = A_0 \cdot N^{1/3} = 6(1.20\text{ cm})^2 \cdot (8000)^{1/3} = 8.64\text{ cm}^2 \times 20 = 172.8\text{ cm}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include all 6 faces for each of the 8.00×1038.00 \times 10^3 cubes: Atotal=8.00×103×6×(0.0600 cm)2=172.8 cm2A_{\text{total}} = 8.00 \times 10^3 \times 6 \times (0.0600\text{ cm})^2 = 172.8\text{ cm}^2.

  2. Substitute the corrected total area into the rate law: Ratecrushed=(2.50×10−4 mol⋅s−1cm−2)(172.8 cm2)=4.32×10−2 mol⋅s−1\text{Rate}_{\text{crushed}} = (2.50 \times 10^{-4}\text{ mol}\cdot\text{s}^{-1}\text{cm}^{-2})(172.8\text{ cm}^2) = 4.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}.

Final answer

4.32×10−2 mol⋅s−14.32 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric surface area formulas for common 3D shapes: cubes (6l26l^2), rectangular prisms (2(lw+lh+wh)2(lw+lh+wh)), and spheres (4πr24\pi r^2).

  • Practice using the scaling relationship Atotal=A0⋅N1/3A_{\text{total}} = A_0 \cdot N^{1/3} to rapidly verify subdivided surface area calculations.

Lock it in

Similar question

01

A spherical catalytic pellet of radius R0=0.60 cmR_0 = 0.60\text{ cm} is ground into N=2.70×104N = 2.70 \times 10^4 identical smaller spherical particles. What is the radius rr of each small particle?

Answer

r=0.020 cmr = 0.020\text{ cm}. Key steps: Volume conservation gives N⋅43πr3=43πR03N \cdot \frac{4}{3}\pi r^3 = \frac{4}{3}\pi R_0^3, so r=R0N1/3=0.60 cm(2.70×104)1/3=0.60 cm30=0.020 cmr = \frac{R_0}{N^{1/3}} = \frac{0.60\text{ cm}}{(2.70 \times 10^4)^{1/3}} = \frac{0.60\text{ cm}}{30} = 0.020\text{ cm}.

02

A solid zinc cube with side length L0=2.0 cmL_0 = 2.0\text{ cm} reacts with acid at an initial rate of 1.5×10−3 mol⋅s−11.5 \times 10^{-3}\text{ mol}\cdot\text{s}^{-1}. If the cube is sliced into N=1000N = 1000 identical small cubes, what is the new initial reaction rate, assuming the rate is directly proportional to external surface area?

Answer

Ratenew=1.5×10−2 mol⋅s−1\text{Rate}_{\text{new}} = 1.5 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}. Key steps: Area scales as Atotal=A0⋅N1/3=A0⋅(1000)1/3=10A0A_{\text{total}} = A_0 \cdot N^{1/3} = A_0 \cdot (1000)^{1/3} = 10 A_0. Since rate is directly proportional to area, Ratenew=10×(1.5×10−3 mol⋅s−1)=1.5×10−2 mol⋅s−1\text{Rate}_{\text{new}} = 10 \times (1.5 \times 10^{-3}\text{ mol}\cdot\text{s}^{-1}) = 1.5 \times 10^{-2}\text{ mol}\cdot\text{s}^{-1}.

03

A cylindrical magnesium rod has initial surface area A0A_0 and volume V0V_0. It is pulverized into NN smaller, geometrically similar micro-cylinders without loss of mass. Express the new total surface area AtotalA_{\text{total}} in terms of A0A_0 and NN, and explain why crushing a solid increases its heterogeneous reaction rate.

Answer

Atotal=A0⋅N1/3A_{\text{total}} = A_0 \cdot N^{1/3}. Key steps: For any geometrically similar 3D shape of characteristic dimension LL, volume scales as L3L^3 and surface area as L2L^2. Conservation of volume gives l=L0N−1/3l = L_0 N^{-1/3}. The area of each piece is a=a0N−2/3a = a_0 N^{-2/3}, so total area is N⋅a=a0N1/3N \cdot a = a_0 N^{1/3}. In heterogeneous kinetics, reaction occurs at the solid-liquid interface; exposing interior atoms directly increases the frequency of effective collisions per second.

Loading workspace…