Resources

An ionic compound formed between tin and oxygen contains tin in its higher common oxidation state (tin(IV) oxide). Determine the chemical formula of this compound and calculate the total number of oxygen atoms present in a sample containing 3.25×10223.25 \times 10^{22} formula units of the compound.

Answer and steps

Final answer

Chemical formula: SnO2\text{SnO}_2; Number of oxygen atoms: 6.50×10226.50 \times 10^{22} atoms

Steps

01

Determine the Chemical Formula of Tin(IV) Oxide

  1. Identify the constituent ions and their charges:

    • The Roman numeral (IV)(\text{IV}) indicates that tin has an oxidation state of +4+4, forming the cation SnX4+\ce{Sn^{4+}}.
    • Oxygen belongs to Group 16 and typically gains two electrons to form the oxide anion, OX2−\ce{O^{2-}}.
  2. Balance the charges for electrical neutrality:

    • A stable ionic compound must have a net charge of zero.
    • One SnX4+\ce{Sn^{4+}} ion contributes a +4+4 charge.
    • Each OX2−\ce{O^{2-}} ion contributes a −2-2 charge: Total negative charge needed=−4\text{Total negative charge needed} = -4 Number of oxide ions=42=2\text{Number of oxide ions} = \frac{4}{2} = 2
    • Thus, the ratio of tin ions to oxide ions is 1:21 : 2.
  3. Write the empirical formula:

    • The chemical formula is SnOX2\ce{SnO2}.

Common Pitfall: Using the "criss-cross" method directly can lead to SnX2OX4\ce{Sn2O4}. Because ionic compounds are represented by empirical formulas, subscripts must always be simplified to the lowest whole-number ratio (2:42:4 reduces to 1:21:2).


02

Calculate the Total Number of Oxygen Atoms

  1. Relate the formula unit to constituent atoms:

    • From the formula SnOX2\ce{SnO2}, each formula unit contains 22 oxygen atoms: 1 formula unit of SnOX2⟶2 atoms of O1\text{ formula unit of }\ce{SnO2} \longrightarrow 2\text{ atoms of }\ce{O}
  2. Calculate the total oxygen atoms:

    • Multiply the number of formula units by the stoichiometric ratio: Number of O atoms=(3.25×1022 formula units)×2 O atoms1 formula unit\text{Number of O atoms} = (3.25 \times 10^{22}\text{ formula units}) \times \frac{2\text{ O atoms}}{1\text{ formula unit}} Number of O atoms=6.50×1022 atoms\text{Number of O atoms} = 6.50 \times 10^{22}\text{ atoms}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the Roman numeral IV as a subscript rather than the ionic charge, writing the formula as Sn₄O₂ (or Sn₂O) and incorrectly using a 1:1 ratio for oxygen.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    SnX4+ and OX2−\ce{Sn^{4+}}\text{ and }\ce{O^{2-}}

  2. Step 2

    SnX4O=SnX2O\cancel{\ce{Sn4O}} = \ce{Sn2O}

    Correct

    SnOX2\ce{SnO2}

    To achieve electrical neutrality, one SnX4+\ce{Sn^{4+}} ion (+4+4) balances two OX2−\ce{O^{2-}} ions (−4-4). When applying the criss-cross rule, the magnitude of the cation charge becomes the subscript of the anion: SnX2OX4\ce{Sn2O4}, which simplifies to the empirical formula SnOX2\ce{SnO2}.

  3. Step 3

    1 O atom per formula unit  ⟹  Total O atoms=3.25×1022×1=3.25×10221\text{ O atom per formula unit} \implies \text{Total O atoms} = 3.25 \times 10^{22} \times 1 = 3.25 \times 10^{22}

    Correct

    2 O atoms per formula unit  ⟹  Total O atoms=3.25×1022×2=6.50×1022 atoms2\text{ O atoms per formula unit} \implies \text{Total O atoms} = 3.25 \times 10^{22} \times 2 = 6.50 \times 10^{22}\text{ atoms}

    Your multiplication was set up logically based on your formula, but because the correct formula unit SnOX2\ce{SnO2} contains 22 oxygen atoms, the total count should be (3.25×1022)×2=6.50×1022(3.25 \times 10^{22}) \times 2 = 6.50 \times 10^{22} atoms.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly interpreted the Roman numeral (IV) as a +4+4 charge on the tin ion.

You correctly identified the oxide ion as having a −2-2 charge.

You followed through with consistent stoichiometric multiplication from your chemical formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Subscript Inversion / Charge Balancing

You assigned the higher subscript to tin instead of oxygen when balancing the +4+4 and −2-2 charges.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When using charge magnitudes to write an ionic formula, the charge of the cation dictates the required quantity of the anion, not the cation itself. Inverting the subscript placement led to an unneutral compound with a 2:12:1 metal-to-nonmetal ratio instead of the neutral 1:21:2 ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Net Charge Zero Check
  • The sum of positive and negative charges in an ionic formula must equal zero: (count of cations×q+)+(count of anions×q−)=0(\text{count of cations} \times q_+) + (\text{count of anions} \times q_-) = 0.

  • Before finalizing any ionic formula, multiply each subscript by its ion's charge to ensure (1×+4)+(2×−2)=0(1 \times +4) + (2 \times -2) = 0.

Criss-Cross Direction
  • In the criss-cross method, the magnitude of the cation's charge moves across to become the anion's subscript, and vice versa.

  • Check that the +4+4 on SnX4+\ce{Sn^{4+}} crosses over to O\ce{O}, yielding OX4\ce{O4}, and the −2-2 on OX2−\ce{O^{2-}} crosses to Sn\ce{Sn}, yielding SnX2\ce{Sn2} before reducing to SnOX2\ce{SnO2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Balance the charges: 1(SnX4+)+2(OX2−)=1(+4)+2(−2)=01(\ce{Sn^{4+}}) + 2(\ce{O^{2-}}) = 1(+4) + 2(-2) = 0.

  2. Write the empirical formula: SnOX2\ce{SnO2}.

  3. Determine oxygen atoms per formula unit: Each formula unit of SnOX2\ce{SnO2} contains 22 oxygen atoms.

  4. Multiply by the sample size: Total O atoms=(3.25×1022 formula units)×2 O atoms/formula unit=6.50×1022 atoms\text{Total O atoms} = (3.25 \times 10^{22}\text{ formula units}) \times 2\text{ O atoms/formula unit} = 6.50 \times 10^{22}\text{ atoms}.

Final answer

Chemical formula: SnOX2\ce{SnO2}; Number of oxygen atoms: 6.50×1022 atoms6.50 \times 10^{22}\text{ atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify electrical neutrality by calculating the net charge of your proposed formula.

  • Practice writing formulas for metals with variable oxidation states such as lead(IV) and titanium(IV).

OverviewACEpath Teacher's Diagnosis

02 The student confuses tin(IV) with tin(II), leading to the formula SnO and finding half the correct number of oxygen atoms.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Tin ion=SnX2+, Oxide ion=OX2−\text{Tin ion} = \ce{Sn^{2+}}, \text{ Oxide ion} = \ce{O^{2-}}

    Correct

    Tin(IV) ion=SnX4+, Oxide ion=OX2−\text{Tin(IV) ion} = \ce{Sn^{4+}}, \text{ Oxide ion} = \ce{O^{2-}}

    You correctly determined that an oxide ion carries a −2-2 charge (OX2−\ce{O^{2-}}). However, the Roman numeral (IV)(\text{IV}) indicates an oxidation state of +4+4, which corresponds to the cation SnX4+\ce{Sn^{4+}}, not SnX2+\ce{Sn^{2+}}.

  2. Step 2

    Formula=SnO\text{Formula} = \ce{SnO}

    Correct

    Formula=SnOX2\text{Formula} = \ce{SnO2}

    Because of the initial charge mistake, you combined SnX2+\ce{Sn^{2+}} and OX2−\ce{O^{2-}} in a 1:11:1 ratio. Combining SnX4+\ce{Sn^{4+}} with OX2−\ce{O^{2-}} requires two oxide ions to achieve electrical neutrality (+4+2(−2)=0+4 + 2(-2) = 0), giving the formula SnOX2\ce{SnO2}.

  3. Step 3

    Number of O atoms=3.25×1022×1=3.25×1022 atoms\text{Number of O atoms} = 3.25 \times 10^{22} \times 1 = 3.25 \times 10^{22}\text{ atoms}

    Correct

    Number of O atoms=3.25×1022×2=6.50×1022 atoms\text{Number of O atoms} = 3.25 \times 10^{22} \times 2 = 6.50 \times 10^{22}\text{ atoms}

    You correctly understood that you must multiply the number of formula units by the subscript of oxygen. Because the correct formula is SnOX2\ce{SnO2}, each formula unit contains 22 oxygen atoms rather than 11.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the oxide ion carries a −2-2 charge (OX2−\ce{O^{2-}}).

You correctly applied the principle of electrical neutrality to balance the ions you wrote.

You correctly set up the multiplication between formula units and the oxygen subscript to find the total atom count.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Nomenclature Roman Numeral Confusion

You read the Roman numeral (IV)(\text{IV}) as 22 instead of 44.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused Roman numeral symbols for oxidation states, writing SnX2+\ce{Sn^{2+}} (tin(II)) when the problem specified tin(IV) (SnX4+\ce{Sn^{4+}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Roman Numeral Translation
  • In Stock system nomenclature, the Roman numeral in parentheses denotes the exact positive charge of the metal cation: (I)=+1(\text{I}) = +1, (II)=+2(\text{II}) = +2, (III)=+3(\text{III}) = +3, (IV)=+4(\text{IV}) = +4, (V)=+5(\text{V}) = +5, (VI)=+6(\text{VI}) = +6.

  • Always convert Roman numerals to Arabic numbers before writing the cation formula (e.g., IV→4→SnX4+\text{IV} \rightarrow 4 \rightarrow \ce{Sn^{4+}}).

Charge Balance Check
  • The net charge of a neutral ionic compound must equal zero: n(cation charge)+m(anion charge)=0n(\text{cation charge}) + m(\text{anion charge}) = 0.

  • Verify: 1(+4)+2(−2)=01(+4) + 2(-2) = 0, confirming that tin(IV) oxide is SnOX2\ce{SnO2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Translate the name: tin(IV) indicates tin with an oxidation state of +4+4, forming SnX4+\ce{Sn^{4+}}. Oxide is OX2−\ce{O^{2-}}.

  2. Balance the charges: one SnX4+\ce{Sn^{4+}} ion (+4+4) balances two OX2−\ce{O^{2-}} ions (2×−2=−42 \times -2 = -4). The chemical formula is SnOX2\ce{SnO2}.

  3. Calculate oxygen atoms: each formula unit of SnOX2\ce{SnO2} has 22 oxygen atoms, so 3.25×1022×2=6.50×1022 oxygen atoms3.25 \times 10^{22} \times 2 = 6.50 \times 10^{22}\text{ oxygen atoms}.

Final answer

Chemical formula: SnOX2\ce{SnO2}; Number of oxygen atoms: 6.50×1022 atoms6.50 \times 10^{22}\text{ atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Roman numerals used in chemical nomenclature, specifically distinguishing II\text{II} (2), IV\text{IV} (4), and VI\text{VI} (6).

  • Practice writing ionic formulas for multivalent transition and post-transition metals (such as Sn\ce{Sn}, Pb\ce{Pb}, and Fe\ce{Fe}).

  • Always double-check that the subscript ratio matches the charges before calculating stoichiometric quantities.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to simplify the empirical subscript ratio when crisscrossing ionic charges, writing Sn₂O₄ instead of SnO₂, which leads to multiplying by 4 oxygen atoms per formula unit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    SnX4++OX2−  ⟹  Formula=SnX2OX4\ce{Sn^{4+} + O^{2-}} \implies \text{Formula} = \ce{Sn2O4}

    Correct

    SnOX2\ce{SnO2}

    You correctly determined that tin is SnX4+\ce{Sn^{4+}} and oxygen is OX2−\ce{O^{2-}}. However, ionic formulas must always be expressed as empirical formulas with the lowest whole-number ratio of ions. The ratio 2:42:4 reduces to 1:21:2, giving SnOX2\ce{SnO2}.

  2. Step 2

    4 O atoms per formula unit  ⟹  Total O atoms=3.25×1022×4=1.30×10234\text{ O atoms per formula unit} \implies \text{Total O atoms} = 3.25 \times 10^{22} \times 4 = 1.30 \times 10^{23}

    Correct

    2 O atoms per formula unit  ⟹  Total O atoms=3.25×1022×2=6.50×10222\text{ O atoms per formula unit} \implies \text{Total O atoms} = 3.25 \times 10^{22} \times 2 = 6.50 \times 10^{22}

    Your arithmetic and multiplication steps were completely correct based on your formula, but because the formula unit is SnOX2\ce{SnO2}, each formula unit contains 22 oxygen atoms rather than 44.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the charges of both ions as SnX4+\ce{Sn^{4+}} and OX2−\ce{O^{2-}}.

You correctly set up the stoichiometric multiplication using formula units to find the total atom count.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unreduced Ionic Subscripts

Writing unreduced subscripts directly from the criss-cross method without dividing by the greatest common divisor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Ionic compounds form continuous crystal lattices rather than discrete molecules, so their chemical formulas must always be written as empirical formulas (the simplest whole-number ratio of ions).

REASONING PATH
Your ACEpath teacher’s suggested approach
Simplifying Ionic Subscripts
  • Ionic compounds are represented by empirical formulas; subscripts must always be divided by their greatest common factor.

  • After criss-crossing ion charges, check if both subscripts share a common factor (like 22 and 44) and simplify them to the lowest whole-number ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Reduce the ion ratio 2:42:4 by dividing both subscripts by 22 to get the empirical formula SnOX2\ce{SnO2}.

  2. Identify that each formula unit of SnOX2\ce{SnO2} contains 22 oxygen atoms.

  3. Multiply the number of formula units by 22: (3.25×1022)×2=6.50×1022(3.25 \times 10^{22}) \times 2 = 6.50 \times 10^{22} atoms.

Final answer

Chemical formula: SnOX2\ce{SnO2}; Number of oxygen atoms: 6.50×10226.50 \times 10^{22} atoms

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check whether the subscripts in an ionic compound can be simplified by dividing by a common factor.

  • Practice writing formulas for transition and post-transition metals with +4+4 charges paired with Group 16 anions (−2-2).

Lock it in

Similar question

01

Write the chemical formula for lead(IV) oxide and calculate the number of oxygen atoms in a sample containing 1.50×10231.50 \times 10^{23} formula units of the compound.

Answer

Formula: PbOX2\ce{PbO2}. Total oxygen atoms: 2×(1.50×1023)=3.00×1023 atoms2 \times (1.50 \times 10^{23}) = 3.00 \times 10^{23}\text{ atoms}.

02

Manganese forms an oxide in which manganese has a +4+4 oxidation state. Write the empirical formula for manganese(IV) oxide and find the total number of ions (cations plus anions) present in 4.00×10214.00 \times 10^{21} formula units of this compound.

Answer

Formula: MnOX2\ce{MnO2}. Each formula unit consists of 1 Mn4+1\text{ Mn}^{4+} ion and 2 O2−2\text{ O}^{2-} ions, giving 33 ions per formula unit. Total ions: 3×(4.00×1021)=1.20×1022 ions3 \times (4.00 \times 10^{21}) = 1.20 \times 10^{22}\text{ ions}.

03

A 0.250 mol0.250\text{ mol} sample of an unknown metal oxide MxOy\ce{M}_x\ce{O}_y contains the metal in a +4+4 oxidation state and oxygen in a −2-2 oxidation state. Determine the formula of the compound and calculate the total number of oxygen atoms in the sample using Avogadro's number (NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}).

Answer

Formula: Balancing +4+4 with −2-2 requires a 1:21:2 ratio, giving MOX2\ce{MO2}. Moles of oxygen atoms: 0.250 mol×2=0.500 mol0.250\text{ mol} \times 2 = 0.500\text{ mol}. Total oxygen atoms: 0.500 mol×6.022×1023 mol−1=3.01×1023 atoms0.500\text{ mol} \times 6.022 \times 10^{23}\text{ mol}^{-1} = 3.01 \times 10^{23}\text{ atoms}.

Loading workspace…