Resources

The critical point marks the thermodynamic threshold where the distinct phase boundary between liquid and gas ceases to exist. Carbon dioxide has a critical temperature of Tc=304.1 KT_{\text{c}} = 304.1\text{ K} (31.0∘C31.0^\circ\text{C}), a critical pressure of Pc=72.8 atmP_{\text{c}} = 72.8\text{ atm}, and a critical density of ρc=0.468 g/cm3\rho_{\text{c}} = 0.468\text{ g/cm}^3. Given the van der Waals constants for CO2\text{CO}_2 are a=3.59 L2⋅atm/mol2a = 3.59\text{ L}^2\cdot\text{atm/mol}^2 and b=0.0427 L/molb = 0.0427\text{ L/mol}, and M=44.01 g/molM = 44.01\text{ g/mol}: (a) calculate the theoretical critical molar volume predicted directly by the van der Waals parameter bb (Vc, vdW=3bV_{\text{c, vdW}} = 3b) versus the experimental critical molar volume derived from ρc\rho_{\text{c}}, and (b) explain, at the molecular level, why the meniscus separating liquid and gas vanishes exactly at and above this threshold.

Answer and steps

Final answer

(a) Vc, vdW=3b=3(0.0427 L/mol)=0.128 L/mol=128 cm3/molV_{\text{c, vdW}} = 3b = 3(0.0427\text{ L/mol}) = 0.128\text{ L/mol} = 128\text{ cm}^3\text{/mol}; from experimental density, Vc, exp=Mρc=44.01 g/mol0.468 g/cm3=94.0 cm3/molV_{\text{c, exp}} = \frac{M}{\rho_{\text{c}}} = \frac{44.01\text{ g/mol}}{0.468\text{ g/cm}^3} = 94.0\text{ cm}^3\text{/mol}. (b) Below TcT_{\text{c}}, intermolecular attractive forces maintain a high-density liquid with distinct short-range cohesive order separated by a surface tension boundary from a low-density, disordered vapor. At T=TcT = T_{\text{c}}, average kinetic energy (kBTk_{\text{B}} T) exactly overcomes the cohesive attraction responsible for surface tension, causing liquid density to decrease and vapor density to increase until they equalize, eliminating the meniscus and creating a single supercritical fluid phase.

Steps

Part (a): Calculating Theoretical and Experimental Critical Molar Volumes

  1. Theoretical Critical Molar Volume from van der Waals Equation: According to the van der Waals model of a real gas, the critical molar volume VcV_{\text{c}} depends solely on the excluded volume parameter bb: Vc, vdW=3bV_{\text{c, vdW}} = 3b Substituting the given value of b=0.0427 L/molb = 0.0427\text{ L/mol}: Vc, vdW=3⋅0.0427 L/mol=0.128 L/mol=128 cm3/molV_{\text{c, vdW}} = 3 \cdot 0.0427\text{ L/mol} = 0.128\text{ L/mol} = 128\text{ cm}^3\text{/mol}
  2. Experimental Critical Molar Volume from Critical Density: The experimental critical molar volume Vc, expV_{\text{c, exp}} is obtained from the molar mass MM and the critical density ρc\rho_{\text{c}}: Vc, exp=MρcV_{\text{c, exp}} = \frac{M}{\rho_{\text{c}}} Substituting M=44.01 g/molM = 44.01\text{ g/mol} and ρc=0.468 g/cm3\rho_{\text{c}} = 0.468\text{ g/cm}^3: Vc, exp=44.01 g/mol0.468 g/cm3≈94.0 cm3/mol=0.0940 L/molV_{\text{c, exp}} = \frac{44.01\text{ g/mol}}{0.468\text{ g/cm}^3} \approx 94.0\text{ cm}^3\text{/mol} = 0.0940\text{ L/mol}

Note: The theoretical van der Waals value overestimates the actual critical volume because the simple hard-sphere assumption in the van der Waals model oversimplifies molecular compressibility and attraction near the critical region.


Part (b): Molecular-Level Explanation of the Vanishing Meniscus

  1. Conditions Below the Critical Temperature (T<TcT < T_{\text{c}}):

    • Intermolecular attractive forces (such as London dispersion forces in COX2\ce{CO2}) dominate over thermal kinetic energy, pulling molecules in the liquid phase into close proximity.
    • This dense packing creates a sharp difference in density between the liquid and vapor phases (ρliquid≫ρvapor\rho_{\text{liquid}} \gg \rho_{\text{vapor}}).
    • Molecules at the liquid surface experience a net inward cohesive pull, generating surface tension, which forms the visible physical boundary (the meniscus).
  2. Reaching the Critical Point (T=TcT = T_{\text{c}}, P=PcP = P_{\text{c}}):

    • As the system is heated in a closed container, the average molecular kinetic energy increases, causing the liquid to expand and its density to decrease. Simultaneously, the vapor pressure rises dramatically, forcing gas molecules closer together and increasing vapor density.
    • At the critical point, the thermal kinetic energy (kBTk_{\text{B}}T) sufficiently disrupts the cohesive forces that sustain surface tension.
    • The densities of the liquid and vapor become identical (ρliquid=ρvapor=ρc\rho_{\text{liquid}} = \rho_{\text{vapor}} = \rho_{\text{c}}), causing surface tension to fall to zero. Without an energetic penalty or density contrast between phases, the meniscus disappears, forming a single, continuous supercritical fluid phase.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the density formula when calculating experimental molar volume, multiplying density by molar mass instead of dividing.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Vc, vdW=3b=3×0.0427 L/mol=0.1281 L/molV_{\text{c, vdW}} = 3b = 3 \times 0.0427\text{ L/mol} = 0.1281\text{ L/mol}

  2. Step 2

    Vc, exp=M×ρc=44.01 g/mol×0.468 g/cm3=20.60 g2/mol⋅cm3V_{\text{c, exp}} = M \times \rho_{\text{c}} = 44.01\text{ g/mol} \times 0.468\text{ g/cm}^3 = 20.60\text{ g}^2/\text{mol}\cdot\text{cm}^3

    Correct

    Vc, exp=Mρc=44.01 g/mol0.468 g/cm3≈94.0 cm3/mol=0.0940 L/molV_{\text{c, exp}} = \frac{M}{\rho_{\text{c}}} = \frac{44.01\text{ g/mol}}{0.468\text{ g/cm}^3} \approx 94.0\text{ cm}^3\text{/mol} = 0.0940\text{ L/mol}

    Molar volume represents volume per mole (cm3/mol\text{cm}^3/\text{mol}), which requires dividing molar mass MM (g/mol\text{g/mol}) by density ρ\rho (g/cm3\text{g/cm}^3). Multiplying them gave units of g2/(mol⋅cm3)\text{g}^2/(\text{mol}\cdot\text{cm}^3) instead of volume per mole.

  3. Step 3

    As temperature increases, liquid density decreases and gas density increases. At the critical point, both phases reach the same density, so surface tension becomes zero and the meniscus vanishes.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the excluded volume parameter bb to determine the theoretical critical volume.

You clearly articulated how density equalization between liquid and vapor causes surface tension to drop to zero and eliminates the meniscus.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Inversion in Dimensional Analysis

You set Vm=M×ρV_{\text{m}} = M \times \rho instead of Vm=MρV_{\text{m}} = \frac{M}{\rho}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated density as a multiplier rather than a conversion factor between mass and volume, failing to verify that the units cancel to yield volume per mole (cm3/mol\text{cm}^3/\text{mol} or L/mol\text{L/mol}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Dimensional Check
  • Molar volume must have dimensions of volumeamount of substance\frac{\text{volume}}{\text{amount of substance}} (such as cm3/mol\text{cm}^3/\text{mol} or L/mol\text{L/mol}).

  • Always check units before completing calculations: g/molg/cm3=cm3mol\frac{\text{g}/\text{mol}}{\text{g}/\text{cm}^3} = \frac{\text{cm}^3}{\text{mol}}.

Molar Mass and Density Relationship
  • Density ρ=massvolume=MVm\text{Density } \rho = \frac{\text{mass}}{\text{volume}} = \frac{M}{V_{\text{m}}}, which rearranges to Vm=MρV_{\text{m}} = \frac{M}{\rho}.

  • Isolate VmV_{\text{m}} algebraically from ρ=MVm\rho = \frac{M}{V_{\text{m}}} by dividing MM by ρ\rho.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the definition of molar volume: Vc, exp=MρcV_{\text{c, exp}} = \frac{M}{\rho_{\text{c}}}.

  2. Substitute the given values: Vc, exp=44.01 g/mol0.468 g/cm3≈94.04 cm3/molV_{\text{c, exp}} = \frac{44.01\text{ g/mol}}{0.468\text{ g/cm}^3} \approx 94.04\text{ cm}^3/\text{mol}.

  3. Convert to liters per mole to compare directly with Vc, vdWV_{\text{c, vdW}}: 94.04 cm3/mol=0.0940 L/mol94.04\text{ cm}^3/\text{mol} = 0.0940\text{ L/mol}.

Final answer

(a) Vc, vdW=0.128 L/molV_{\text{c, vdW}} = 0.128\text{ L/mol} (128 cm3/mol128\text{ cm}^3\text{/mol}), Vc, exp=0.0940 L/molV_{\text{c, exp}} = 0.0940\text{ L/mol} (94.0 cm3/mol94.0\text{ cm}^3\text{/mol}). (b) Heating equalizes liquid and gas densities at TcT_{\text{c}}, reducing surface tension to zero and causing the meniscus to vanish.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out dimensional units explicitly during substitution to ensure the resulting unit matches the desired physical quantity.

  • Practice converting between density, molar mass, and molar volume for real gases and liquids.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers the relation between critical volume and the van der Waals parameter as Vc = b instead of 3b.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Vc,vdW=b=0.0427 L/molV_{\text{c,vdW}} = b = 0.0427\text{ L/mol}

    Correct

    Vc,vdW=3b=3(0.0427 L/mol)=0.128 L/mol=128 cm3/molV_{\text{c,vdW}} = 3b = 3(0.0427\text{ L/mol}) = 0.128\text{ L/mol} = 128\text{ cm}^3\text{/mol}

    You set the theoretical critical molar volume equal to bb instead of 3b3b. In the van der Waals equation of state, setting the first and second derivatives of pressure with respect to volume equal to zero at the critical point yields Vc=3bV_{\text{c}} = 3b.

  2. Step 2

    Vc,exp=Mρc=44.01 g/mol0.468 g/cm3=94.04 cm3/mol=0.09404 L/molV_{\text{c,exp}} = \frac{M}{\rho_{\text{c}}} = \frac{44.01\text{ g/mol}}{0.468\text{ g/cm}^3} = 94.04\text{ cm}^3\text{/mol} = 0.09404\text{ L/mol}

  3. Step 3

    Heating causes the liquid density to drop while pressure increases gas density. At the critical point, liquid and gas become indistinguishable in density, causing the meniscus to disappear.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the experimental critical molar volume from molar mass and density.

You clearly explained how thermal expansion and rising vapor pressure equalize phase densities at the critical point.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula recall error for van der Waals critical volume

You equated the critical molar volume directly to the excluded volume parameter bb rather than multiplying by the factor of 3.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the finite excluded volume parameter bb (the minimum theoretical volume occupied by one mole of molecules at infinite pressure) with the critical molar volume Vc=3bV_{\text{c}} = 3b, which accounts for both excluded volume and the critical inflection point conditions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Critical Volume Factor
  • For a van der Waals fluid, critical conditions (∂P∂V)T=0\left(\frac{\partial P}{\partial V}\right)_{T} = 0 and (∂2P∂V2)T=0\left(\frac{\partial^2 P}{\partial V^2}\right)_{T} = 0 yield (V−b)3=0(V - b)^3 = 0, leading to Vc=3bV_{\text{c}} = 3b.

  • Always multiply the excluded volume parameter bb by 3 when calculating the van der Waals critical volume.

Physical Meaning of b versus Vc
  • The parameter bb represents the excluded volume per mole, while VcV_{\text{c}} is the volume at which the gas and liquid phases merge.

  • Check that Vc>bV_{\text{c}} > b; molecules at the critical point still have free space to move, so VcV_{\text{c}} must be significantly larger than the hard-core excluded volume bb.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute b=0.0427 L/molb = 0.0427\text{ L/mol} into Vc, vdW=3bV_{\text{c, vdW}} = 3b.

  2. Vc, vdW=3×0.0427 L/mol=0.1281 L/mol=128.1 cm3/molV_{\text{c, vdW}} = 3 \times 0.0427\text{ L/mol} = 0.1281\text{ L/mol} = 128.1\text{ cm}^3\text{/mol}.

Final answer

Vc, vdW=0.128 L/mol=128 cm3/molV_{\text{c, vdW}} = 0.128\text{ L/mol} = 128\text{ cm}^3\text{/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of the critical constants (Vc=3bV_{\text{c}} = 3b, Pc=a27b2P_{\text{c}} = \frac{a}{27b^2}, Tc=8a27RbT_{\text{c}} = \frac{8a}{27Rb}) from the cubic expansion of the van der Waals equation.

  • Practice checking problem prompts carefully, as formulas provided in the question text are meant to be applied directly.

OverviewACEpath Teacher's Diagnosis

03 The student attributes the disappearance of the meniscus to complete chemical decomposition or ionization of the molecules rather than equal phase densities and zero surface tension.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Vc, vdW=3b=3×0.0427 L/mol=0.1281 L/molV_{\text{c, vdW}} = 3b = 3 \times 0.0427\text{ L/mol} = 0.1281\text{ L/mol}

  2. Step 2

    Vc, exp=Mρc=44.01 g/mol0.468 g/cm3=94.04 cm3/mol=0.09404 L/molV_{\text{c, exp}} = \frac{M}{\rho_{\text{c}}} = \frac{44.01\text{ g/mol}}{0.468\text{ g/cm}^3} = 94.04\text{ cm}^3\text{/mol} = 0.09404\text{ L/mol}

  3. Step 3

    At the critical point, the thermal energy is so large that the covalent bonds in CO2\text{CO}_2 break apart. The molecules dissociate into carbon and oxygen atoms, so the meniscus disappears because CO2\text{CO}_2 no longer exists as a molecule.

    Correct

    At T=TcT = T_{\text{c}}, increasing thermal kinetic energy expands the liquid (lowering its density) while high vapor pressure compresses the gas (increasing its density). At TcT_{\text{c}}, ρliquid=ρvapor\rho_{\text{liquid}} = \rho_{\text{vapor}}, surface tension vanishes, and the phase boundary disappears while the CO2\text{CO}_2 molecules remain chemically intact.

    Reaching the critical temperature affects intermolecular interactions, not intramolecular covalent bonds. Carbon dioxide molecules remain intact at 31.0∘C31.0^\circ\text{C}; the meniscus disappears because the densities of the liquid and vapor phases become identical, causing the surface tension to drop to zero.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the van der Waals relation Vc, vdW=3bV_{\text{c, vdW}} = 3b to calculate the theoretical critical molar volume.

You correctly related molar mass and experimental critical density to find Vc, expV_{\text{c, exp}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing intermolecular phase transitions with intramolecular chemical dissociation

You treated the critical threshold as a chemical decomposition reaction rather than a physical phase transition.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated high thermal kinetic energy overcoming weak intermolecular cohesive forces with the much higher energy required to break strong covalent chemical bonds. At Tc=31.0∘CT_{\text{c}} = 31.0^\circ\text{C} (304.1 K304.1\text{ K}), thermal energy (kBTk_{\text{B}}T) is far too small to break C=O\text{C=O} double bonds (bond dissociation energy ≈800 kJ/mol\approx 800\text{ kJ/mol}). Instead, thermal expansion decreases liquid density while increasing vapor pressure increases gas density until both phases merge into a single supercritical fluid with zero surface tension.

REASONING PATH
Your ACEpath teacher’s suggested approach
Intermolecular vs. Intramolecular Energy Scales
  • Phase transitions involve overcoming intermolecular forces (dispersion, dipole-dipole), which require tens of kJ/mol\text{kJ/mol}, whereas breaking covalent bonds requires hundreds of kJ/mol\text{kJ/mol}.

  • Check whether the stated process is physical (a change in packing/state) or chemical (breaking bonds) before describing molecular behavior.

Physical Cause of the Vanishing Meniscus
  • A meniscus exists only when two contacting phases have different densities and a non-zero interfacial surface tension.

  • Explain the vanishing meniscus in terms of converging phase densities (ρliquid=ρvapor\rho_{\text{liquid}} = \rho_{\text{vapor}}) and surface tension falling to zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. As temperature rises toward TcT_{\text{c}} in a sealed vessel, thermal kinetic energy causes the liquid phase to expand, decreasing ρliquid\rho_{\text{liquid}}.

  2. Concurrently, the rate of vaporization increases, driving up vapor density ρvapor\rho_{\text{vapor}}.

  3. At T=TcT = T_{\text{c}}, the average thermal kinetic energy overcomes net cohesive intermolecular attractions at the liquid surface, causing surface tension to vanish.

  4. Because ρliquid=ρvapor=ρc\rho_{\text{liquid}} = \rho_{\text{vapor}} = \rho_{\text{c}}, the refractive index and density differences disappear, eliminating the phase boundary and forming a single supercritical fluid of intact CO2\text{CO}_2 molecules.

Final answer

(a) Vc, vdW=0.128 L/molV_{\text{c, vdW}} = 0.128\text{ L/mol}, Vc, exp=0.0940 L/molV_{\text{c, exp}} = 0.0940\text{ L/mol}; (b) Below TcT_{\text{c}}, liquid and vapor have distinct densities and non-zero surface tension creates a meniscus. At TcT_{\text{c}}, thermal motion overcomes cohesive forces, liquid and gas densities equalize, surface tension drops to zero, and the meniscus vanishes while CO2\text{CO}_2 molecules remain chemically intact.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the energy distinction between intermolecular forces (e.g., London dispersion) and intramolecular covalent bonds.

  • Practice sketching phase density curves ρ\rho vs. TT for liquid and vapor in a sealed container approaching TcT_{\text{c}}.

Lock it in

Similar question

01

Liquid water at 4∘C4^\circ\text{C} has a density of ρ=1.00 g/cm3\rho = 1.00\text{ g/cm}^3 and a molar mass of M=18.02 g/molM = 18.02\text{ g/mol}. Calculate the molar volume of liquid water in cm3/mol\text{cm}^3/\text{mol} and in L/mol\text{L/mol}.

Answer

Vm=Mρ=18.02 g/mol1.00 g/cm3=18.02 cm3/mol=0.01802 L/molV_{\text{m}} = \frac{M}{\rho} = \frac{18.02\text{ g/mol}}{1.00\text{ g/cm}^3} = 18.02\text{ cm}^3/\text{mol} = 0.01802\text{ L/mol}.

02

Methane (CH4\text{CH}_4, M=16.04 g/molM = 16.04\text{ g/mol}) has a critical density of ρc=0.162 g/cm3\rho_{\text{c}} = 0.162\text{ g/cm}^3 and a van der Waals constant b=0.0428 L/molb = 0.0428\text{ L/mol}. Compare the van der Waals theoretical critical molar volume (Vc, vdW=3bV_{\text{c, vdW}} = 3b) to the experimental critical molar volume derived from ρc\rho_{\text{c}}.

Answer

Vc, vdW=3(0.0428 L/mol)=0.1284 L/mol=128.4 cm3/molV_{\text{c, vdW}} = 3(0.0428\text{ L/mol}) = 0.1284\text{ L/mol} = 128.4\text{ cm}^3/\text{mol}. Vc, exp=Mρc=16.04 g/mol0.162 g/cm3≈99.0 cm3/mol=0.0990 L/molV_{\text{c, exp}} = \frac{M}{\rho_{\text{c}}} = \frac{16.04\text{ g/mol}}{0.162\text{ g/cm}^3} \approx 99.0\text{ cm}^3/\text{mol} = 0.0990\text{ L/mol}. The van der Waals equation overestimates VcV_{\text{c}} by about 30%30\%.

03

Argon (M=39.95 g/molM = 39.95\text{ g/mol}) has a critical molar volume of Vc=74.6 cm3/molV_{\text{c}} = 74.6\text{ cm}^3/\text{mol}. (a) Determine its critical density ρc\rho_{\text{c}} in g/cm3\text{g/cm}^3. (b) Using the van der Waals approximation Vc≈3bV_{\text{c}} \approx 3b, estimate the excluded volume parameter bb in L/mol\text{L/mol}.

Answer

(a) ρc=MVc=39.95 g/mol74.6 cm3/mol≈0.535 g/cm3\rho_{\text{c}} = \frac{M}{V_{\text{c}}} = \frac{39.95\text{ g/mol}}{74.6\text{ cm}^3/\text{mol}} \approx 0.535\text{ g/cm}^3. (b) b=Vc3=74.6 cm3/mol3≈24.87 cm3/mol=0.0249 L/molb = \frac{V_{\text{c}}}{3} = \frac{74.6\text{ cm}^3/\text{mol}}{3} \approx 24.87\text{ cm}^3/\text{mol} = 0.0249\text{ L/mol}.

Loading workspace…