Resources

Consider a standard galvanic Daniell cell: Zn(s)∣Zn2+(aq, 1.00 M)∥Cu2+(aq, 1.00 M)∣Cu(s)\text{Zn(s)} \mid \text{Zn}^{2+}\text{(aq, }1.00\text{ M)} \parallel \text{Cu}^{2+}\text{(aq, }1.00\text{ M)} \mid \text{Cu(s)} with Ecell∘=+1.10 VE^\circ_{\text{cell}} = +1.10\text{ V} at 298 K298\text{ K}. An external adjustable DC power supply is connected to the electrodes such that its positive terminal is wired to the copper electrode and its negative terminal is wired to the zinc electrode. (a) State the precise critical threshold voltage VextV_{\text{ext}} at which current flow halts and the cell transitions from a discharging galvanic cell to an electrolytic cell. (b) Predict the chemical reaction that occurs at the copper electrode when Vext=1.50 VV_{\text{ext}} = 1.50\text{ V}, and identify whether the copper electrode acts as an anode or a cathode in this forced state.

Answer and steps

Final answer

(a) Critical threshold Vext=1.10 VV_{\text{ext}} = 1.10\text{ V} (current ceases at Vext=1.10 VV_{\text{ext}} = 1.10\text{ V}; electrolytic operation begins for Vext>1.10 VV_{\text{ext}} > 1.10\text{ V}); (b) Oxidation occurs: Cu(s)→Cu2+(aq)+2e−\text{Cu(s)} \rightarrow \text{Cu}^{2+}\text{(aq)} + 2e^-, making the copper electrode the anode.

Steps

Part (a): Determining the Critical Threshold Voltage

  1. Spontaneous Cell Behavior (Galvanic State): In the standard Daniell cell, zinc has a more negative standard reduction potential (E∘=−0.76 VE^\circ = -0.76\text{ V}) than copper (E∘=+0.34 VE^\circ = +0.34\text{ V}): Ecell∘=Ecathode∘−Eanode∘=0.34 V−(−0.76 V)=+1.10 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.34\text{ V} - (-0.76\text{ V}) = +1.10\text{ V} Under spontaneous conditions, electrons flow externally from the zinc electrode (anode, negative) to the copper electrode (cathode, positive).
  2. Opposing External Voltage (VextV_{\text{ext}}): An external direct-current power supply is wired in direct opposition: its positive terminal is connected to the Cu\ce{Cu} electrode and its negative terminal is connected to the Zn\ce{Zn} electrode. This opposing potential creates a back-electromotive force (EMF) that counteracts the cell's natural driving potential:

    • When Vext<1.10 VV_{\text{ext}} < 1.10\text{ V}: The cell still discharges spontaneously as a galvanic cell, though at a reduced rate.
    • When Vext=1.10 VV_{\text{ext}} = 1.10\text{ V}: The applied potential exactly cancels the cell's standard EMF (Vext=Ecell∘V_{\text{ext}} = E^\circ_{\text{cell}}). The net driving voltage across the circuit is zero, so no chemical reaction occurs and current flow completely halts.
    • When Vext>1.10 VV_{\text{ext}} > 1.10\text{ V}: The external potential overcomes the cell's natural EMF, driving the reverse non-spontaneous reaction and operating as an electrolytic cell.

Therefore, the critical threshold voltage at which current halts and the operational mode transitions is: Vext=1.10 VV_{\text{ext}} = 1.10\text{ V}


Part (b): Electrode Process and Identity at Vext=1.50 VV_{\text{ext}} = 1.50\text{ V}

  1. Direction of Electron Flow: Because Vext=1.50 V>1.10 VV_{\text{ext}} = 1.50\text{ V} > 1.10\text{ V}, the circuit operates in an electrolytic state. The external power source forces electrons out of the copper electrode (connected to the positive terminal of the power supply) and injects electrons into the zinc electrode (connected to the negative terminal).
  2. Half-Reaction at the Copper Electrode: Because electrons are withdrawn from the copper electrode, solid copper undergoes oxidation: Cu(s)→CuX2+(aq)+2 eX−\ce{Cu(s) -> Cu^{2+}(aq) + 2e^-}
  3. Designation as Anode or Cathode: By universal electrochemical convention:

    • Anode: The electrode where oxidation occurs.
    • Cathode: The electrode where reduction occurs.

    Because oxidation takes place at the copper electrode during electrolytic operation, the copper electrode acts as the anode (carrying a positive sign in an electrolytic cell).

Common Pitfall to Avoid: Do not identify anodes and cathodes by fixed polarity signs alone (++ or −-), because polarities reverse between galvanic and electrolytic modes. Instead, always associate the anode with oxidation and the cathode with reduction.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that an external voltage opposing the cell potential drives the reverse reaction once it exceeds the standard cell potential, assuming copper still undergoes reduction as in the galvanic mode.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ecell∘=1.10 V  ⟹  Vext=1.10 VE^\circ_{\text{cell}} = 1.10\text{ V} \implies V_{\text{ext}} = 1.10\text{ V}

  2. Step 2

    Vext=1.50 VV_{\text{ext}} = 1.50\text{ V} provides extra driving potential for reduction   ⟹  Cu2+(aq)+2e−→Cu(s)\implies \text{Cu}^{2+}\text{(aq)} + 2e^- \rightarrow \text{Cu(s)}

    Correct

    Cu(s)→Cu2+(aq)+2e−\text{Cu(s)} \rightarrow \text{Cu}^{2+}\text{(aq)} + 2e^-

    Because the positive terminal of the external supply is wired to copper, applying Vext=1.50 V>1.10 VV_{\text{ext}} = 1.50\text{ V} > 1.10\text{ V} overcomes the spontaneous cell potential and forces electrons out of the copper electrode, causing copper oxidation rather than reduction.

  3. Step 3

    Copper electrode acts as cathode

    Correct

    Copper electrode acts as anode

    Because you concluded that reduction takes place at the copper electrode, you designated it as the cathode. However, since the forced reaction oxidizes copper, the copper electrode acts as the anode.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the critical threshold voltage opposing the standard cell potential is 1.10 V1.10\text{ V}.

You correctly applied the definition that the site of reduction is called the cathode.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reverse Reaction Direction in Electrolytic Mode

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that an external voltage greater than the cell potential enhances the natural galvanic reaction direction, overlooking that connecting like polarities in opposition forces the non-spontaneous reverse redox reaction once Vext>Ecell∘V_{\text{ext}} > E^\circ_{\text{cell}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Opposing Voltage
  • An opposing external DC source (+ to ++ \text{ to } +, − to −- \text{ to } -) counteracts the cell's natural EMF. When Vext>Ecell∘V_{\text{ext}} > E^\circ_{\text{cell}}, the cell operates electrolytically and runs in reverse.

  • Compare VextV_{\text{ext}} to Ecell∘E^\circ_{\text{cell}}. If Vext>Ecell∘V_{\text{ext}} > E^\circ_{\text{cell}}, flip the spontaneous cell reaction to find the forced half-reactions.

Anode and Cathode Definitions
  • Anode is always the site of oxidation (An Ox), and cathode is always the site of reduction (Red Cat), regardless of whether the cell is galvanic or electrolytic.

  • Identify the half-reaction occurring at the electrode first; if oxidation occurs, label that electrode as the anode.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that wiring the positive terminal of the external DC supply to the copper electrode pulls electrons away from copper when Vext>1.10 VV_{\text{ext}} > 1.10\text{ V}.

  2. Write the forced oxidation half-reaction at the copper electrode: Cu(s)→Cu2+(aq)+2e−\text{Cu(s)} \rightarrow \text{Cu}^{2+}\text{(aq)} + 2e^-.

  3. Apply the electrochemical convention (oxidation occurs at the anode) to classify the copper electrode as the anode in this electrolytic state.

Final answer

(a) Vext=1.10 VV_{\text{ext}} = 1.10\text{ V}; (b) Reaction: \text{Cu(s)} \rightarrow \text{Cu}^{2+}\text{(aq)} + 2e^-}; Electrode role: anode

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how connecting an opposing external voltage changes cell behavior across the three regimes: Vext<Ecell∘V_{\text{ext}} < E^\circ_{\text{cell}}, Vext=Ecell∘V_{\text{ext}} = E^\circ_{\text{cell}}, and Vext>Ecell∘V_{\text{ext}} > E^\circ_{\text{cell}}.

  • Practice identifying anode versus cathode strictly by the chemical process (oxidation vs. reduction) rather than by electrode material or fixed sign conventions.

OverviewACEpath Teacher's Diagnosis

02 The student correctly identifies the reversed half-reaction as oxidation of copper but defines anode and cathode by galvanic electrode polarities, incorrectly concluding that the copper electrode is the cathode.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Vext=1.10 VV_{\text{ext}} = 1.10\text{ V}

  2. Step 2

    Vext>1.10 V reverses the cell reaction  ⟹  Cu(s)→Cu2+(aq)+2e−V_{\text{ext}} > 1.10\text{ V} \text{ reverses the cell reaction} \implies \text{Cu(s)} \rightarrow \text{Cu}^{2+}\text{(aq)} + 2e^-

  3. Step 3

    Copper is the positive electrode, so it acts as cathode\text{Copper is the positive electrode, so it acts as cathode}

    Correct

    Copper is the anode because oxidation occurs at the anode\text{Copper is the anode because oxidation occurs at the anode}

    You determined the electrode designation from electrical polarity rather than the chemical half-reaction. Anode and cathode are defined by reaction type: the anode is always the site of oxidation, regardless of whether the cell is galvanic or electrolytic.

WHAT YOU DID WELL
Compliments from Your Teacher

You found the exact critical threshold voltage where net current ceases.

You deduced that an external voltage greater than 1.10 V1.10\text{ V} forces the non-spontaneous oxidation of copper.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electrode definition by polarity instead of redox process

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the cathode with the positive terminal (the sign convention of a spontaneous galvanic cell) instead of using the universal electrochemical definition where the anode is always the site of oxidation and the cathode is always the site of reduction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define by Process, Not Polarity
  • Anode = Oxidation (An Ox); Cathode = Reduction (Red Cat) across all electrochemical systems.

  • Always determine whether the electrode undergoes loss of electrons (oxidation) or gain of electrons (reduction) before assigning anode or cathode.

Polarity Signs Switch Between Cell Types
  • In a galvanic cell, the anode is negative and the cathode is positive; in an electrolytic cell, the anode is positive and the cathode is negative.

  • Never rely on the sign (++ or −-) to label the anode or cathode without checking whether the cell is discharging or being driven externally.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that copper atoms lose electrons, which is an oxidation half-reaction.

  2. Apply the universal electrochemical definition: oxidation occurs at the anode.

  3. Conclude that the copper electrode acts as the anode in this electrolytic cell.

Final answer

(a) Vext=1.10 VV_{\text{ext}} = 1.10\text{ V}; (b) Reaction: Cu(s)→Cu2+(aq)+2e−\text{Cu(s)} \rightarrow \text{Cu}^{2+}\text{(aq)} + 2e^-; Copper electrode acts as the anode.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic 'An Ox, Red Cat' so you always identify electrodes by the half-reaction occurring on them.

  • Practice tracking how external power supplies flip terminal polarities relative to oxidation and reduction sites in electrolytic cells.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the critical threshold voltage with zero net potential from an unpowered short circuit, stating the threshold voltage is 0 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Current halts at equilibrium where potential is zero ⟹Vext=0 V\Longrightarrow V_{\text{ext}} = 0\text{ V}

    Correct

    Vext=Ecell∘=1.10 VV_{\text{ext}} = E^\circ_{\text{cell}} = 1.10\text{ V}

    Current halts when the opposing external voltage completely balances the cell's standard electromotive force (Enet=Ecell∘−Vext=0E_{\text{net}} = E^\circ_{\text{cell}} - V_{\text{ext}} = 0). That requires an applied voltage of Vext=1.10 VV_{\text{ext}} = 1.10\text{ V}, not 0 V0\text{ V}.

  2. Step 2

    At 1.50 V>1.10 V1.50\text{ V} > 1.10\text{ V}, the cell operates in reverse as an electrolytic cell ⟹Cu(s)→Cu2+(aq)+2e−\Longrightarrow \text{Cu(s)} \rightarrow \text{Cu}^{2+}\text{(aq)} + 2e^-

  3. Step 3

    Oxidation occurs at the copper electrode, so it acts as the anode

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly compared the applied voltage 1.50 V1.50\text{ V} to 1.10 V1.10\text{ V} to deduce that the cell operates as an electrolytic cell.

You wrote the correct half-reaction for the oxidation of copper.

You correctly identified the copper electrode as the anode based on the occurrence of oxidation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Opposing Voltage Threshold Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the net circuit potential being zero with the required value of the external opposing voltage itself. Current halts when the external power supply produces a back-EMF equal in magnitude to the cell's natural EMF (Vext=Ecell∘=1.10 VV_{\text{ext}} = E^\circ_{\text{cell}} = 1.10\text{ V}), not when the external power supply is turned off (Vext=0 VV_{\text{ext}} = 0\text{ V}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Balancing Opposing Potentials
  • When an external DC source is wired in opposition to a galvanic cell, the net driving potential is Enet=Ecell−VextE_{\text{net}} = E_{\text{cell}} - V_{\text{ext}}. Current flow halts when Enet=0E_{\text{net}} = 0.

  • Set Vext=EcellV_{\text{ext}} = E_{\text{cell}} to find the null-current transition point, rather than setting Vext=0V_{\text{ext}} = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the net potential across the opposing circuit to zero: Enet=Ecell∘−Vext=0E_{\text{net}} = E^\circ_{\text{cell}} - V_{\text{ext}} = 0.

  2. Substitute the cell's standard potential: 1.10 V−Vext=01.10\text{ V} - V_{\text{ext}} = 0.

  3. Solve for the critical applied threshold: Vext=1.10 VV_{\text{ext}} = 1.10\text{ V}.

Final answer

(a) Critical threshold Vext=1.10 VV_{\text{ext}} = 1.10\text{ V}; (b) Oxidation occurs: Cu(s)→Cu2+(aq)+2e−\text{Cu(s)} \rightarrow \text{Cu}^{2+}\text{(aq)} + 2e^-, making the copper electrode the anode.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how an external power supply opposes a spontaneous galvanic cell using Kirchhoff's voltage law (Enet=Ecell−VextE_{\text{net}} = E_{\text{cell}} - V_{\text{ext}}).

  • Practice identifying cell behavior across all three voltage regimes: Vext<EcellV_{\text{ext}} < E_{\text{cell}} (galvanic), Vext=EcellV_{\text{ext}} = E_{\text{cell}} (equilibrium/halt), and Vext>EcellV_{\text{ext}} > E_{\text{cell}} (electrolytic).

Lock it in

Similar question

01

A standard Daniell cell has Ecell∘=1.10 VE^\circ_{\text{cell}} = 1.10\text{ V}. If an opposing DC power supply is connected (+ to Cu+\text{ to } \text{Cu}, − to Zn-\text{ to } \text{Zn}) with an applied potential of Vext=0.80 VV_{\text{ext}} = 0.80\text{ V}, state whether the cell operates in galvanic or electrolytic mode and write the half-reaction occurring at the copper electrode.

Answer

Because Vext=0.80 V<1.10 VV_{\text{ext}} = 0.80\text{ V} < 1.10\text{ V}, the cell remains in galvanic mode. Reduction of copper ions still occurs at the copper electrode: Cu2+(aq)+2e−→Cu(s)\text{Cu}^{2+}\text{(aq)} + 2e^- \rightarrow \text{Cu(s)}.

02

An electrochemical cell Ni(s)∣Ni2+(aq)∥Ag+(aq)∣Ag(s)\text{Ni(s)} \mid \text{Ni}^{2+}\text{(aq)} \parallel \text{Ag}^+\text{(aq)} \mid \text{Ag(s)} has Ecell∘=+1.05 VE^\circ_{\text{cell}} = +1.05\text{ V}. An opposing external power supply with Vext=1.40 VV_{\text{ext}} = 1.40\text{ V} is wired with its positive terminal to silver and negative terminal to nickel. Identify the reaction at the nickel electrode and state whether nickel acts as the anode or cathode.

Answer

Since Vext=1.40 V>1.05 VV_{\text{ext}} = 1.40\text{ V} > 1.05\text{ V}, the cell is driven electrolytically in reverse. Nickel ions are reduced at the nickel electrode: Ni2+(aq)+2e−→Ni(s)\text{Ni}^{2+}\text{(aq)} + 2e^- \rightarrow \text{Ni(s)}, making the nickel electrode the cathode.

03

During the recharging of a lead-acid battery, an external charger forces current against the spontaneous cell potential of 2.05 V2.05\text{ V} per cell. At the positive plate, solid PbSO4\text{PbSO}_4 is converted back to PbO2\text{PbO}_2. Determine whether the oxidation state of lead increases or decreases at the positive plate during recharge, and identify whether this plate serves as the anode or cathode.

Answer

Lead changes from +2+2 in PbSO4\text{PbSO}_4 to +4+4 in PbO2\text{PbO}_2, which is an increase in oxidation state (oxidation). Since oxidation occurs at the positive plate during recharge, it functions as the anode.

Loading workspace…