Resources
The successive ionization energies of an unknown Period 3 element are given as follows: , , , . (a) Identify the element based on valence electron valence-shell transitions. (b) When element reacts completely with solid elemental sulfur (assuming standard states to form an ionic binary compound), write the empirical formula of the resulting compound and the ground-state electron configuration of both constituent ions in the lattice.
Answer and steps
Final answer
(a) Magnesium (); (b) Empirical formula: ; Cation configuration: (or ); Anion configuration: (or ).
Steps
Identify Element from Successive Ionization Energies
Ionization energy is the energy required to remove an electron from a gaseous atom or ion. Examining the successive values gives:
Calculate the ratio or increase between consecutive steps:
There is a massive jump between and (an increase of more than ). This indicates that the first two electrons are relatively easy to remove because they reside in the outermost valence shell, while the third electron is removed from a much closer, fully filled, inner core shell (noble gas core).
Therefore, element possesses valence electrons and belongs to Group 2 (alkaline earth metals).
Since is in Period 3, the element with two valence electrons () is magnesium ().
Determine the Empirical Formula with Sulfur
- Ion formed by : Magnesium readily loses its two valence electrons to achieve the stable electron configuration of neon, forming the magnesium cation:
- Ion formed by : Sulfur is in Group 16 (Period 3) with valence electrons (). It requires additional electrons to achieve a stable octet, forming the sulfide anion:
- Compound formation: To maintain electrical neutrality in the crystal lattice, the cations and anions combine in a ratio:
Thus, the empirical formula of the compound is (magnesium sulfide).
Common Pitfall: Do not simply assume formulas based on prefixes or diatomic states like ; ionic formulas are dictated by the lowest whole-number ratio of balanced ionic charges.
Write the Ground-State Electron Configurations of the Constituent Ions
- Magnesium ion (): Neutral has electrons: . Removing two valence electrons leaves electrons:
- Sulfide ion (): Neutral has electrons: . Adding two electrons gives electrons:
Typical errors
01 The student misidentifies the large jump as occurring after IE₃ rather than between IE₂ and IE₃, incorrectly deducing that the element has 3 valence electrons (Al).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
and The largest jump occurs between and , so has valence electrons Period 3 element with valence electrons is .
Correct(a factor of ) is the largest jump, indicating valence electrons Element is magnesium ().
Comparing consecutive ionization energies reveals that the jump from to is (more than a five-fold increase), whereas from to the increase is only (a factor of ). The massive surge after removing electrons signifies breaking into an inner core shell, so belongs to Group 2.
- Step 2
forms and forms Empirical formula:
Correctforms and forms Empirical formula:
Your charge-balancing method was executed properly, but because element is , it forms a cation (), resulting in a ratio with , giving .
- Step 3Correct
You correctly determined the sulfide electron configuration and the neon-core configuration, but the cation is , not .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that sulfur forms the sulfide anion with an octet configuration of .
You correctly balanced ionic charges to construct an electrically neutral empirical formula based on your chosen cation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou noted the large magnitude of () and assumed the jump occurred between and , overlooking the much larger proportional increase between and .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating high absolute values of ionization energy with the primary core-electron jump, rather than calculating the consecutive difference or ratio () to locate the boundary between valence and core electrons.
REASONING PATH
Your ACEpath teacher’s suggested approach- Locating the Valence-to-Core Transition
The removal of the first core electron requires a dramatic jump in energy ( to or greater relative to the previous ), whereas removing electrons within the same shell only shows modest, gradual increases.
Always compute consecutive differences or ratios . The number of valence electrons equals immediately preceding the dramatic jump.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate consecutive ratios: , , .
The primary core jump occurs between and , establishing valence electrons for Period 3 element , which is .
Combine and to yield the empirical formula .
Write ground-state electron configurations: and .
(a) Magnesium (); (b) Empirical formula: ; Cation configuration: ; Anion configuration:
02 The student identifies the element correctly as magnesium but writes the electron configurations of the neutral atoms instead of the constituent ions.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Large jump from () to () Element has valence electrons Element is
- Step 2
and combine to form Empirical formula:
- Step 3
and
Correct(or ); (or )
You wrote the electron configurations for neutral and neutral rather than the constituent ions ( and ) present in the ionic lattice.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the valence electron count from the large jump between successive ionization energies.
You matched the Period 3 Group 2 element to magnesium.
You determined the correct empirical formula of the binary ionic compound as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote the electron configurations of the neutral parent atoms rather than adjusting for the electrons lost or gained by the lattice ions.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the prompt's explicit requirement for the constituent ions in the lattice, resulting in writing neutral ground-state configurations out of habit.
REASONING PATH
Your ACEpath teacher’s suggested approach- Inspect the requested species
Lattice constituents in ionic compounds are charged ions, not neutral atoms.
Always check whether the prompt asks for neutral atoms or ions before writing out configurations.
- Adjust electron counts for net charge
Cations lose electrons from their highest energy orbitals (), whereas anions gain electrons into their valence shell to achieve an octet.
Remove two valence electrons for () and add two electrons for ().
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the constituent ions in the lattice: the magnesium cation and the sulfide anion .
Determine the electron count for : a neutral atom has electrons (), so loses its two valence electrons to leave electrons, giving (or ).
Determine the electron count for : a neutral atom has electrons (), so gains two electrons into the subshell to total electrons, giving (or ).
;
03 The student deduces the correct element and ions but erroneously uses crossover subscript notation without reducing to the simplest integer ratio for an empirical formula, writing Mg₂S₂.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Big leap between and shows valence electrons. Element is magnesium ().
- Step 2
Ions are and . Crossing charges gives formula .
CorrectYou correctly determined the ionic charges of and , but an empirical formula must represent the simplest whole-number ratio of ions in the lattice. Dividing both subscripts by gives the empirical formula .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the large jump between the second and third ionization energies as evidence of two valence electrons.
You accurately identified element as magnesium based on its period and group.
You correctly identified the individual ions formed, and .
You wrote the correct ground-state electron configurations for both ions.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou relied mechanically on the criss-cross method for balancing ionic charges without applying the definition of an empirical formula, which requires reducing the ion subscripts to their lowest whole-number ratio.
REASONING PATH
Your ACEpath teacher’s suggested approach- Definition of Empirical Formula in Ionic Compounds
Ionic compounds form continuous three-dimensional crystal lattices rather than discrete molecules; their chemical formulas are empirical formulas and must always be expressed as the lowest integer ratio of cations to anions.
Whenever applying the criss-cross rule, check whether the resulting subscripts share a common factor (such as , , or ) and reduce them to their simplest whole-number ratio.
CORRECTED PATH
ACEpath Teacher's DemonstrationNotice that both ions have equal and opposite charges ( and ), meaning they balance in a ratio: .
Reduce the crossed subscripts by dividing by their greatest common divisor () to obtain the empirical formula .
(a) Magnesium (); (b) Empirical formula: ; Cation: ; Anion:
Lock it in
How do you identify the number of valence electrons from a table of successive ionization energies?
Find the largest proportional jump between consecutive values (). The element has valence electrons.
Similar question
An unknown Period 2 element has successive ionization energies: , , , . Identify element and write the formula of its oxide.
Answer
shows a massive jump between and (), indicating valence electrons. In Period 2, the element is Boron (). Its stable oxide is .
A main-group element has successive ionization energies: , , . When reacts with chlorine gas, identify the empirical formula of the product and explain using valence-shell electron transitions why does not form under standard conditions.
Answer
The huge jump occurs between and (), showing valence electron (alkali metal, e.g., ). The formula is . does not form because removing a second electron requires disrupting a stable noble-gas core (), which lattice energy cannot thermodynamically compensate.
Element belongs to Period 3. Its first five ionization energies are: and . (a) Identify element . (b) Predict whether forms a stable binary ionic nitride, and if so, give its empirical formula and the ground-state electron configuration of the nitride ion.
Answer
(a) The jump occurs between and (), giving valence electrons is Aluminum (). (b) loses electrons to form , and nitrogen gains electrons to form . They combine in a ratio to form aluminum nitride, . The ground-state electron configuration of is (isoelectronic with ).