Resources

An industrial effluent contains dissolved hydrazine at a concentration of 48.0 mg/L48.0\text{ mg/L} (48.0 ppm48.0\text{ ppm}, assuming density 1.00 g/mL1.00\text{ g/mL}). Hydrazine is destroyed by oxidation with iodate in acidic medium according to the unbalanced skeleton: N2H4(aq)+IO3−(aq)→N2(g)+I−(aq)\text{N}_2\text{H}_4(aq) + \text{IO}_3^-(aq) \rightarrow \text{N}_2(g) + \text{I}^-(aq). (a) Balance the redox equation with lowest integer coefficients in acidic solution. (b) Calculate the volume in milliliters of 0.0250 M KIO30.0250\text{ M } \text{KIO}_3 required to completely react with 500.0 mL500.0\text{ mL} of this wastewater.

Answer and steps

Final answer

(a) 3N2H4(aq)+2IO3−(aq)→3N2(g)+2I−(aq)+6H2O(l)3\text{N}_2\text{H}_4(aq) + 2\text{IO}_3^-(aq) \rightarrow 3\text{N}_2(g) + 2\text{I}^-(aq) + 6\text{H}_2\text{O}(l); (b) 20.0 mL20.0\text{ mL} of 0.0250 M KIO30.0250\text{ M } \text{KIO}_3

Steps

01

Write and balance the oxidation half-reaction

Part (a): Balance the Redox Equation in Acidic Solution

To balance the skeleton equation using the half-reaction method: NX2HX4(aq)+IOX3X−(aq)→NX2(g)+IX−(aq)\ce{N2H4(aq) + IO3^-(aq) -> N2(g) + I^-(aq)}

Hydrazine (NX2HX4\ce{N2H4}) is oxidized to molecular nitrogen (NX2\ce{N2}):

  1. Balance nitrogen atoms: Nitrogen is already balanced (22 atoms on each side).
  2. Balance hydrogen atoms with HX+\ce{H+}: Add 4HX+4\ce{H+} to the right: NX2HX4(aq)→NX2(g)+4 HX+(aq)\ce{N2H4(aq) -> N2(g) + 4H+(aq)}
  3. Balance electrical charge with electrons (eX−\ce{e-}): The left side has a charge of 00, and the right side has a charge of +4+4. Add 4eX−4\ce{e-} to the right: NX2HX4(aq)→NX2(g)+4 HX+(aq)+4 eX−\ce{N2H4(aq) -> N2(g) + 4H+(aq) + 4e-}
02

Write and balance the reduction half-reaction

Iodate (IOX3X−\ce{IO3^-}) is reduced to iodide (IX−\ce{I-}):

  1. Balance iodine atoms: Iodine is already balanced (11 atom on each side).
  2. Balance oxygen atoms with HX2O\ce{H2O}: Add 3HX2O3\ce{H2O} to the right: IOX3X−(aq)→IX−(aq)+3 HX2O(l)\ce{IO3^-(aq) -> I^-(aq) + 3H2O(l)}
  3. Balance hydrogen atoms with HX+\ce{H+}: Add 6HX+6\ce{H+} to the left: IOX3X−(aq)+6 HX+(aq)→IX−(aq)+3 HX2O(l)\ce{IO3^-(aq) + 6H+(aq) -> I^-(aq) + 3H2O(l)}
  4. Balance electrical charge with electrons (eX−\ce{e-}): The left side has a charge of +5+5 (−1+6(+1)-1 + 6(+1)), and the right side has a charge of −1-1. Add 6eX−6\ce{e-} to the left: IOX3X−(aq)+6 HX+(aq)+6 eX−→IX−(aq)+3 HX2O(l)\ce{IO3^-(aq) + 6H+(aq) + 6e- -> I^-(aq) + 3H2O(l)}
03

Equalize electron transfer and combine half-reactions

The oxidation produces 4eX−4\ce{e-} per molecule, and the reduction consumes 6eX−6\ce{e-}. The least common multiple of 44 and 66 is 1212.

  • Multiply the oxidation half-reaction by 33: 3NX2HX4(aq)→3 NX2(g)+12 HX+(aq)+12 eX−3\ce{N2H4(aq) -> 3N2(g) + 12H+(aq) + 12e-}
  • Multiply the reduction half-reaction by 22: 2IOX3X−(aq)+12 HX+(aq)+12 eX−→2 IX−(aq)+6 HX2O(l)2\ce{IO3^-(aq) + 12H+(aq) + 12e- -> 2I^-(aq) + 6H2O(l)}

Add the two half-reactions together: 3NX2HX4(aq)+2 IOX3X−(aq)+12 HX+(aq)+12 eX−→3 NX2(g)+2 IX−(aq)+12 HX+(aq)+12 eX−+6 HX2O(l)3\ce{N2H4(aq) + 2IO3^-(aq) + 12H+(aq) + 12e- -> 3N2(g) + 2I^-(aq) + 12H+(aq) + 12e- + 6H2O(l)}

Cancel the identical 12eX−12\ce{e-} and 12HX+12\ce{H+} from both sides: 3NX2HX4(aq)+2 IOX3X−(aq)→3 NX2(g)+2 IX−(aq)+6 HX2O(l)3\ce{N2H4(aq) + 2IO3^-(aq) -> 3N2(g) + 2I^-(aq) + 6H2O(l)}


Part (b): Calculate the Required Volume of KIOX3\ce{KIO3} Solution

01

Find the mass and moles of hydrazine in the sample

  1. Volume of wastewater sample: V=500.0 mL=0.5000 LV = 500.0\text{ mL} = 0.5000\text{ L}
  2. Mass of NX2HX4\ce{N2H4}: mass=48.0 mg/L⋅0.5000 L=24.0 mg=0.0240 g\text{mass} = 48.0\text{ mg/L} \cdot 0.5000\text{ L} = 24.0\text{ mg} = 0.0240\text{ g}
  3. Molar mass of NX2HX4\ce{N2H4}: M(NX2HX4)=2(14.01 g/mol)+4(1.008 g/mol)≈32.05 g/molM(\ce{N2H4}) = 2(14.01\text{ g/mol}) + 4(1.008\text{ g/mol}) \approx 32.05\text{ g/mol}
  4. Moles of NX2HX4\ce{N2H4}: n(NX2HX4)=0.0240 g32.05 g/mol=7.488×10−4 mol≈7.50×10−4 moln(\ce{N2H4}) = \frac{0.0240\text{ g}}{32.05\text{ g/mol}} = 7.488 \times 10^{-4}\text{ mol} \approx 7.50 \times 10^{-4}\text{ mol}
02

Relate moles of NX2HX4\ce{N2H4} to moles of IOX3X−\ce{IO3^-}

From the balanced equation, the stoichiometric ratio is: n(IOX3X−)n(NX2HX4)=23\frac{n(\ce{IO3^-})}{n(\ce{N2H4})} = \frac{2}{3}

Calculate the required moles of IOX3X−\ce{IO3^-}: n(IOX3X−)=23⋅(7.50×10−4 mol)=5.00×10−4 moln(\ce{IO3^-}) = \frac{2}{3} \cdot (7.50 \times 10^{-4}\text{ mol}) = 5.00 \times 10^{-4}\text{ mol}

03

Calculate the volume of 0.0250 M KIO30.0250\text{ M KIO3}

Using the molarity formula V=nMV = \frac{n}{M}: V(KIOX3)=5.00×10−4 mol0.0250 mol/L=0.0200 L=20.0 mLV(\ce{KIO3}) = \frac{5.00 \times 10^{-4}\text{ mol}}{0.0250\text{ mol/L}} = 0.0200\text{ L} = 20.0\text{ mL}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the stoichiometric mole ratio between iodate and hydrazine, multiplying by 3/2 instead of 2/3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NX2HX4→NX2+4 HX++4 eX−  ⟹  IOX3X−+6 HX++6 eX−→IX−+3 HX2O  ⟹  3NX2HX4(aq)+2IOX3X−(aq)→3NX2(g)+2IX−(aq)+6HX2O(l)\ce{N2H4 -> N2 + 4H+ + 4e-} \implies \ce{IO3- + 6H+ + 6e- -> I- + 3H2O} \implies 3\ce{N2H4(aq)} + 2\ce{IO3-(aq)} \rightarrow 3\ce{N2(g)} + 2\ce{I-(aq)} + 6\ce{H2O(l)}

  2. Step 2

    mass NX2HX4=48.0 mg/L×0.5000 L=24.0 mg=0.0240 g  ⟹  n(NX2HX4)=0.0240 g32.05 g/mol=7.49×10−4 mol\text{mass } \ce{N2H4} = 48.0\text{ mg/L} \times 0.5000\text{ L} = 24.0\text{ mg} = 0.0240\text{ g} \implies n(\ce{N2H4}) = \frac{0.0240\text{ g}}{32.05\text{ g/mol}} = 7.49 \times 10^{-4}\text{ mol}

  3. Step 3

    n(KIOX3)=7.49×10−4 mol×(32)=1.12×10−3 moln(\ce{KIO3}) = 7.49 \times 10^{-4}\text{ mol} \times \left(\frac{3}{2}\right) = 1.12 \times 10^{-3}\text{ mol}

    Correct

    n(KIOX3)=7.49×10−4 mol NX2HX4×2 mol IOX3X−3 mol NX2HX4=5.00×10−4 moln(\ce{KIO3}) = 7.49 \times 10^{-4}\text{ mol } \ce{N2H4} \times \frac{2\text{ mol } \ce{IO3^-}}{3\text{ mol } \ce{N2H4}} = 5.00 \times 10^{-4}\text{ mol}

    You inverted the stoichiometric mole ratio. Because the equation requires 2 mol IOX3X−2\text{ mol } \ce{IO3^-} for every 3 mol NX2HX43\text{ mol } \ce{N2H4}, you must multiply by 23\frac{2}{3} rather than 32\frac{3}{2}.

  4. Step 4

    V=1.12×10−3 mol0.0250 M=45.0 mLV = \frac{1.12 \times 10^{-3}\text{ mol}}{0.0250\text{ M}} = 45.0\text{ mL}

    Correct

    V=5.00×10−4 mol0.0250 mol/L=0.0200 L=20.0 mLV = \frac{5.00 \times 10^{-4}\text{ mol}}{0.0250\text{ mol/L}} = 0.0200\text{ L} = 20.0\text{ mL}

    Your molarity division method is mathematically correct, but the numerical answer is incorrect due to the inverted mole ratio in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You successfully separated and balanced both the oxidation and reduction half-reactions in acidic solution.

You correctly calculated the mass and molar amount of hydrazine present in the wastewater sample.

You used the correct relationship between molarity, moles, and solution volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric ratio inversion

You accidentally placed the hydrazine coefficient in the numerator and the iodate coefficient in the denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Setting up mole ratios without explicit chemical labels often causes upside-down conversion factors. Writing the target substance in the numerator and the given substance in the denominator ensures units cancel properly.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Ratio Setup
  • moles desired=moles given×coefficient of desiredcoefficient of given\text{moles desired} = \text{moles given} \times \frac{\text{coefficient of desired}}{\text{coefficient of given}}

  • Always write down the full unit with the chemical formula (e.g., 2 mol IOX3X−3 mol NX2HX4\frac{2\text{ mol } \ce{IO3^-}}{3\text{ mol } \ce{N2H4}}) so you can verify that the given species cancels out.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct mole ratio: n(KIOX3)=7.488×10−4 mol NX2HX4×2 mol IOX3X−3 mol NX2HX4=4.992×10−4 moln(\ce{KIO3}) = 7.488 \times 10^{-4}\text{ mol } \ce{N2H4} \times \frac{2\text{ mol } \ce{IO3^-}}{3\text{ mol } \ce{N2H4}} = 4.992 \times 10^{-4}\text{ mol}

  2. Calculate the volume of titrant: V=4.992×10−4 mol0.0250 mol/L=0.01997 L=20.0 mLV = \frac{4.992 \times 10^{-4}\text{ mol}}{0.0250\text{ mol/L}} = 0.01997\text{ L} = 20.0\text{ mL}

Final answer

(a) 3NX2HX4(aq)+2IOX3X−(aq)→3NX2(g)+2IX−(aq)+6HX2O(l)3\ce{N2H4}(aq) + 2\ce{IO3-}(aq) \rightarrow 3\ce{N2}(g) + 2\ce{I-}(aq) + 6\ce{H2O}(l); (b) 20.0 mL20.0\text{ mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include chemical species names in the units of every stoichiometric conversion factor to prevent accidental inversion.

  • Perform a quick mental sanity check: since hydrazine has a coefficient of 33 and iodate has a coefficient of 22, you need fewer moles of iodate than hydrazine.

OverviewACEpath Teacher's Diagnosis

02 The student balances the equation by assuming a 1:1 mole ratio of reactants without balancing electron transfer, leading to an incorrect stoichiometric calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N2H4(aq)+IO3−(aq)→N2(g)+I−(aq)+2H2O(l)\text{N}_2\text{H}_4(aq) + \text{IO}_3^-(aq) \rightarrow \text{N}_2(g) + \text{I}^-(aq) + 2\text{H}_2\text{O}(l)

    Correct

    3N2H4(aq)+2IO3−(aq)→3N2(g)+2I−(aq)+6H2O(l)3\text{N}_2\text{H}_4(aq) + 2\text{IO}_3^-(aq) \rightarrow 3\text{N}_2(g) + 2\text{I}^-(aq) + 6\text{H}_2\text{O}(l)

    You attempted to balance the reaction by inspection without balancing charge or electrons transferred. Your equation has 33 oxygen atoms on the left but only 22 on the right. In acidic medium, you must separate the process into oxidation and reduction half-reactions, balance oxygen with H2O\text{H}_2\text{O}, balance hydrogen with H+\text{H}^+, and equalize the electrons lost (4e−4e^- per N2H4\text{N}_2\text{H}_4) and gained (6e−6e^- per IO3−\text{IO}_3^-).

  2. Step 2

    mass N2H4=48.0 mg/L×0.5000 L=24.0 mg=0.0240 g  ⟹  n(N2H4)=0.0240 g32.05 g/mol=7.49×10−4 mol\text{mass } \text{N}_2\text{H}_4 = 48.0\text{ mg/L} \times 0.5000\text{ L} = 24.0\text{ mg} = 0.0240\text{ g} \implies n(\text{N}_2\text{H}_4) = \frac{0.0240\text{ g}}{32.05\text{ g/mol}} = 7.49 \times 10^{-4}\text{ mol}

  3. Step 3

    n(KIO3)=n(N2H4)=7.49×10−4 moln(\text{KIO}_3) = n(\text{N}_2\text{H}_4) = 7.49 \times 10^{-4}\text{ mol}

    Correct

    n(KIO3)=23n(N2H4)=23(7.49×10−4 mol)=4.99×10−4 moln(\text{KIO}_3) = \frac{2}{3} n(\text{N}_2\text{H}_4) = \frac{2}{3}(7.49 \times 10^{-4}\text{ mol}) = 4.99 \times 10^{-4}\text{ mol}

    Your 1:11:1 mole ratio followed consistently from your unbalanced equation in Step 1, but the correctly balanced equation requires a 2:32:3 mole ratio of IO3−\text{IO}_3^- to N2H4\text{N}_2\text{H}_4.

  4. Step 4

    V=7.49×10−4 mol0.0250 M=0.0300 L=30.0 mLV = \frac{7.49 \times 10^{-4}\text{ mol}}{0.0250\text{ M}} = 0.0300\text{ L} = 30.0\text{ mL}

    Correct

    V=4.99×10−4 mol0.0250 mol/L=0.0200 L=20.0 mLV = \frac{4.99 \times 10^{-4}\text{ mol}}{0.0250\text{ mol/L}} = 0.0200\text{ L} = 20.0\text{ mL}

    You correctly applied the molarity formula V=nMV = \frac{n}{M}, but the numerical value was affected by the incorrect mole quantity from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted the volume of wastewater from milliliters to liters.

You correctly calculated the mass and molar amount of hydrazine.

You correctly applied the molarity relationship to find volume from moles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unbalanced Redox Electron Transfer

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You balanced a redox reaction by ad-hoc inspection of atoms rather than using the systematic half-reaction method, neglecting conservation of charge and electron transfer equality.

REASONING PATH
Your ACEpath teacher’s suggested approach
Half-Reaction Electron Accounting
  • Total electrons lost in the oxidation half-reaction must equal total electrons gained in the reduction half-reaction before combining.

  • Write separate oxidation and reduction half-reactions, balance O\text{O} with H2O\text{H}_2\text{O} and H\text{H} with H+\text{H}^+, balance net charge with e−e^-, and multiply by integers to cancel all electrons.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the balanced stoichiometric ratio from part (a): 3N2H4∼2IO3−3\text{N}_2\text{H}_4 \sim 2\text{IO}_3^-.

  2. Calculate required moles of KIO3\text{KIO}_3: n(KIO3)=23×(7.49×10−4 mol)=4.993×10−4 moln(\text{KIO}_3) = \frac{2}{3} \times (7.49 \times 10^{-4}\text{ mol}) = 4.993 \times 10^{-4}\text{ mol}.

  3. Compute volume: V=4.993×10−4 mol0.0250 mol/L=0.0200 L=20.0 mLV = \frac{4.993 \times 10^{-4}\text{ mol}}{0.0250\text{ mol/L}} = 0.0200\text{ L} = 20.0\text{ mL}.

Final answer

(a) 3N2H4(aq)+2IO3−(aq)→3N2(g)+2I−(aq)+6H2O(l)3\text{N}_2\text{H}_4(aq) + 2\text{IO}_3^-(aq) \rightarrow 3\text{N}_2(g) + 2\text{I}^-(aq) + 6\text{H}_2\text{O}(l); (b) 20.0 mL20.0\text{ mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always split complex redox equations into separate oxidation and reduction half-reactions instead of balancing by inspection.

  • Verify that both total atom counts and net electric charges are identical on both sides of the final equation.

  • Double-check the stoichiometric mole ratio in titration problems before calculating required reagent volumes.

OverviewACEpath Teacher's Diagnosis

03 The student uses the total concentration value without accounting for the 500.0 mL sample volume, effectively calculating the amount of titrant needed for 1.00 L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NX2HX4→NX2+4 HX++4 eX−  ⟹  IOX3X−+6 HX++6 eX−→IX−+3 HX2O  ⟹  3NX2HX4(aq)+2IOX3X−(aq)→3NX2(g)+2IX−(aq)+6HX2O(l)\ce{N2H4 -> N2 + 4H+ + 4e-} \implies \ce{IO3- + 6H+ + 6e- -> I- + 3H2O} \implies 3\ce{N2H4}(aq) + 2\ce{IO3-}(aq) \rightarrow 3\ce{N2}(g) + 2\ce{I-}(aq) + 6\ce{H2O}(l)

  2. Step 2

    mass NX2HX4=48.0 mg=0.0480 g  ⟹  n(NX2HX4)=0.0480 g32.05 g/mol=1.50×10−3 mol\text{mass } \ce{N2H4} = 48.0\text{ mg} = 0.0480\text{ g} \implies n(\ce{N2H4}) = \frac{0.0480\text{ g}}{32.05\text{ g/mol}} = 1.50 \times 10^{-3}\text{ mol}

    Correct

    mass=(48.0 mg/L)(0.5000 L)=24.0 mg=0.0240 g  ⟹  n(NX2HX4)=0.0240 g32.05 g/mol=7.49×10−4 mol\text{mass} = (48.0\text{ mg/L})(0.5000\text{ L}) = 24.0\text{ mg} = 0.0240\text{ g} \implies n(\ce{N2H4}) = \frac{0.0240\text{ g}}{32.05\text{ g/mol}} = 7.49 \times 10^{-4}\text{ mol}

    You treated the concentration 48.0 mg/L48.0\text{ mg/L} as the total mass present, forgetting to multiply by the wastewater sample volume of 500.0 mL500.0\text{ mL} (0.5000 L0.5000\text{ L}).

  3. Step 3

    n(KIOX3)=(23)×1.50×10−3 mol=1.00×10−3 moln(\ce{KIO3}) = \left(\frac{2}{3}\right) \times 1.50 \times 10^{-3}\text{ mol} = 1.00 \times 10^{-3}\text{ mol}

    Correct

    n(KIOX3)=(23)×7.49×10−4 mol=5.00×10−4 moln(\ce{KIO3}) = \left(\frac{2}{3}\right) \times 7.49 \times 10^{-4}\text{ mol} = 5.00 \times 10^{-4}\text{ mol}

    You applied the correct stoichiometric ratio of 2:32:3, but your result was affected by the initial mass error.

  4. Step 4

    V=1.00×10−3 mol0.0250 M=0.0400 L=40.0 mLV = \frac{1.00 \times 10^{-3}\text{ mol}}{0.0250\text{ M}} = 0.0400\text{ L} = 40.0\text{ mL}

    Correct

    V=5.00×10−4 mol0.0250 M=0.0200 L=20.0 mLV = \frac{5.00 \times 10^{-4}\text{ mol}}{0.0250\text{ M}} = 0.0200\text{ L} = 20.0\text{ mL}

    Your molarity formula and unit conversions were executed properly, but the numerical answer is doubled because of the earlier sample volume omission.

WHAT YOU DID WELL
Compliments from Your Teacher

You balanced both half-reactions and the overall redox equation completely and accurately.

You used the correct molar mass of hydrazine (32.05 g/mol32.05\text{ g/mol}) to find moles.

You correctly used the 2:32:3 stoichiometric ratio from your balanced reaction.

You correctly applied V=nMV = \frac{n}{M} to find the titrant volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted sample volume in concentration conversion

You equated a concentration in mg/L\text{mg/L} directly to the absolute mass in milligrams without scaling by the actual volume of the sample.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing an intensive quantity (concentration, mg/L\text{mg/L}) with an extensive quantity (absolute mass, mg\text{mg}). In titration and stoichiometry problems, always multiply concentration by the specific aliquot/sample volume before calculating moles.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the units of the given value
  • Concentration (mg/L)×Volume (L)=Mass (mg)\text{Concentration } (\text{mg/L}) \times \text{Volume } (\text{L}) = \text{Mass } (\text{mg})

  • Whenever a concentration is provided, immediately multiply by the sample volume VsampleV_{\text{sample}} to find the mass or moles present in that specific portion.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the actual mass of NX2HX4\ce{N2H4} in 500.0 mL500.0\text{ mL}: mass=48.0 mg/L×0.5000 L=24.0 mg=0.0240 g\text{mass} = 48.0\text{ mg/L} \times 0.5000\text{ L} = 24.0\text{ mg} = 0.0240\text{ g}.

  2. Convert to moles: n(NX2HX4)=0.0240 g32.05 g/mol=7.488×10−4 moln(\ce{N2H4}) = \frac{0.0240\text{ g}}{32.05\text{ g/mol}} = 7.488 \times 10^{-4}\text{ mol}.

  3. Use the stoichiometric ratio (2IOX3X−:3NX2HX42\ce{IO3-} : 3\ce{N2H4}): n(KIOX3)=23×7.488×10−4 mol=4.992×10−4 moln(\ce{KIO3}) = \frac{2}{3} \times 7.488 \times 10^{-4}\text{ mol} = 4.992 \times 10^{-4}\text{ mol}.

  4. Find the required titrant volume: V=4.992×10−4 mol0.0250 mol/L=0.01997 L≈20.0 mLV = \frac{4.992 \times 10^{-4}\text{ mol}}{0.0250\text{ mol/L}} = 0.01997\text{ L} \approx 20.0\text{ mL}.

Final answer

20.0 mL20.0\text{ mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before dividing by molar mass, verify that your starting quantity is in grams rather than grams per liter.

  • Circle both the sample volume and the titrant concentration in the prompt to ensure every given quantity is used in your dimensional analysis chain.

Lock it in

Similar question

01

A 250.0 mL250.0\text{ mL} water sample contains 32.0 mg/L32.0\text{ mg/L} of dissolved hydrazine (NX2HX4\ce{N2H4}, molar mass 32.05 g/mol32.05\text{ g/mol}). Calculate the volume in milliliters of 0.0100 M KIOX30.0100\text{ M } \ce{KIO3} needed to oxidize the hydrazine completely according to: 3NX2HX4+2IOX3X−→3NX2+2IX−+6HX2O3\ce{N2H4} + 2\ce{IO3-} \rightarrow 3\ce{N2} + 2\ce{I-} + 6\ce{H2O}.

Answer

Mass of NX2HX4=32.0 mg/L×0.2500 L=8.00 mg=0.00800 g\ce{N2H4} = 32.0\text{ mg/L} \times 0.2500\text{ L} = 8.00\text{ mg} = 0.00800\text{ g}. Moles of NX2HX4=0.00800 g32.05 g/mol=2.496×10−4 mol\ce{N2H4} = \frac{0.00800\text{ g}}{32.05\text{ g/mol}} = 2.496 \times 10^{-4}\text{ mol}. Required moles of IOX3X−=2.496×10−4 mol×23=1.664×10−4 mol\ce{IO3^-} = 2.496 \times 10^{-4}\text{ mol} \times \frac{2}{3} = 1.664 \times 10^{-4}\text{ mol}. Volume of KIOX3=1.664×10−4 mol0.0100 mol/L=0.01664 L=16.6 mL\ce{KIO3} = \frac{1.664 \times 10^{-4}\text{ mol}}{0.0100\text{ mol/L}} = 0.01664\text{ L} = 16.6\text{ mL}.

02

An acidic solution containing iron(II) is titrated with dichromate: 6FeX2+(aq)+CrX2OX7X2−(aq)+14HX+(aq)→6FeX3+(aq)+2CrX3+(aq)+7HX2O(l)6\ce{Fe^2+}(aq) + \ce{Cr2O7^2-}(aq) + 14\ce{H+}(aq) \rightarrow 6\ce{Fe^3+}(aq) + 2\ce{Cr^3+}(aq) + 7\ce{H2O}(l). If 35.00 mL35.00\text{ mL} of 0.0200 M KX2CrX2OX70.0200\text{ M } \ce{K2Cr2O7} reaches the equivalence point, how many grams of FeX2+\ce{Fe^2+} (molar mass 55.85 g/mol55.85\text{ g/mol}) were in the sample?

Answer

Moles of CrX2OX7X2−=0.03500 L×0.0200 mol/L=7.00×10−4 mol\ce{Cr2O7^2-} = 0.03500\text{ L} \times 0.0200\text{ mol/L} = 7.00 \times 10^{-4}\text{ mol}. Moles of FeX2+=7.00×10−4 mol CrX2OX7X2−×6 mol FeX2+1 mol CrX2OX7X2−=4.20×10−3 mol\ce{Fe^2+} = 7.00 \times 10^{-4}\text{ mol } \ce{Cr2O7^2-} \times \frac{6\text{ mol } \ce{Fe^2+}}{1\text{ mol } \ce{Cr2O7^2-}} = 4.20 \times 10^{-3}\text{ mol}. Mass of FeX2+=4.20×10−3 mol×55.85 g/mol=0.235 g\ce{Fe^2+} = 4.20 \times 10^{-3}\text{ mol} \times 55.85\text{ g/mol} = 0.235\text{ g}.

03

A 100.0 mL100.0\text{ mL} waste stream contains nitrite ions (NOX2X−\ce{NO2^-}, molar mass 46.01 g/mol46.01\text{ g/mol}). The nitrite is titrated with 0.0500 M KMnOX40.0500\text{ M } \ce{KMnO4} in acidic solution: 5NOX2X−+2MnOX4X−+6HX+→5NOX3X−+2MnX2++3HX2O5\ce{NO2^-} + 2\ce{MnO4^-} + 6\ce{H^+} \rightarrow 5\ce{NO3^-} + 2\ce{Mn^2+} + 3\ce{H2O}. If 16.40 mL16.40\text{ mL} of the permanganate solution is required, calculate the concentration of nitrite in the waste stream in mg/L\text{mg/L}.

Answer

Moles of MnOX4X−=0.01640 L×0.0500 mol/L=8.20×10−4 mol\ce{MnO4^-} = 0.01640\text{ L} \times 0.0500\text{ mol/L} = 8.20 \times 10^{-4}\text{ mol}. Moles of NOX2X−=8.20×10−4 mol MnOX4X−×5 mol NOX2X−2 mol MnOX4X−=2.05×10−3 mol\ce{NO2^-} = 8.20 \times 10^{-4}\text{ mol } \ce{MnO4^-} \times \frac{5\text{ mol } \ce{NO2^-}}{2\text{ mol } \ce{MnO4^-}} = 2.05 \times 10^{-3}\text{ mol}. Mass of NOX2X−=2.05×10−3 mol×46.01 g/mol=0.09432 g=94.32 mg\ce{NO2^-} = 2.05 \times 10^{-3}\text{ mol} \times 46.01\text{ g/mol} = 0.09432\text{ g} = 94.32\text{ mg}. Concentration =94.32 mg0.1000 L=943 mg/L= \frac{94.32\text{ mg}}{0.1000\text{ L}} = 943\text{ mg/L}.

Loading workspace…