Resources

The first ionization energy of potassium is 418.8 kJ/mol418.8\text{ kJ/mol}. (a) Convert this ionization energy into units of electron-volts per atom (1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J}, NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}). (b) Calculate the maximum wavelength λ\lambda in nanometers (nm\text{nm}) of an incident photon capable of ionizing a gaseous ground-state potassium atom, using Planck's constant h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s} and the speed of light c=2.998×108 m/sc = 2.998 \times 10^8\text{ m/s}. Round each value to three significant figures.

Answer and steps

Final answer

(a) IE1=4.34 eV/atomIE_1 = 4.34\text{ eV/atom}; (b) λmax=286 nm\lambda_{\text{max}} = 286\text{ nm}

Steps

Part (a): Converting Ionization Energy to eV/atom\text{eV/atom}

  1. Find the ionization energy per single atom in joules (J\text{J}): The given ionization energy is on a molar basis: IE1=418.8 kJ/mol=418.8×103 J/molIE_1 = 418.8\text{ kJ/mol} = 418.8 \times 10^3\text{ J/mol}

    Divide by Avogadro's constant (NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}) to determine the energy needed to remove an electron from a single potassium atom: Eatom=418.8×103 J/mol6.022×1023 atoms/mol≈6.955×10−19 J/atomE_{\text{atom}} = \frac{418.8 \times 10^3\text{ J/mol}}{6.022 \times 10^{23}\text{ atoms/mol}} \approx 6.955 \times 10^{-19}\text{ J/atom}

  2. Convert joules to electron-volts (eV\text{eV}): Using the conversion factor 1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J}: IE1=6.955×10−19 J/atom1.602×10−19 J/eV≈4.341 eV/atomIE_1 = \frac{6.955 \times 10^{-19}\text{ J/atom}}{1.602 \times 10^{-19}\text{ J/eV}} \approx 4.341\text{ eV/atom}

    Rounding to three significant figures gives: IE1=4.34 eV/atomIE_1 = 4.34\text{ eV/atom}


Part (b): Calculating the Maximum Wavelength (λmax\lambda_{\text{max}}) for Ionization

  1. Relate photon energy to wavelength: According to Planck's equation, the energy of a photon is inversely proportional to its wavelength: E=hcλE = \frac{hc}{\lambda}

    To ionize the atom, the photon must supply at least the energy required to remove the outermost electron (E≥EatomE \ge E_{\text{atom}}). Consequently, the minimum required photon energy corresponds to the maximum allowable wavelength: λmax=hcEatom\lambda_{\text{max}} = \frac{hc}{E_{\text{atom}}}

  2. Substitute the given constants and compute λmax\lambda_{\text{max}}:

    • h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s}
    • c=2.998×108 m/sc = 2.998 \times 10^8\text{ m/s}
    • Eatom=6.955×10−19 JE_{\text{atom}} = 6.955 \times 10^{-19}\text{ J}

    λmax=(6.626×10−34 J⋅s)(2.998×108 m/s)6.955×10−19 J\lambda_{\text{max}} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(2.998 \times 10^8\text{ m/s})}{6.955 \times 10^{-19}\text{ J}} λmax=1.9865×10−25 J⋅m6.955×10−19 J≈2.856×10−7 m\lambda_{\text{max}} = \frac{1.9865 \times 10^{-25}\text{ J}\cdot\text{m}}{6.955 \times 10^{-19}\text{ J}} \approx 2.856 \times 10^{-7}\text{ m}

  3. Convert meters to nanometers (nm\text{nm}): Since 1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}: λmax=2.856×10−7 m×109 nm1 m≈285.6 nm\lambda_{\text{max}} = 2.856 \times 10^{-7}\text{ m} \times \frac{10^9\text{ nm}}{1\text{ m}} \approx 285.6\text{ nm}

    Rounding to three significant figures gives: λmax=286 nm\lambda_{\text{max}} = 286\text{ nm}

(Note: Be careful to calculate photon properties using the energy of a single atom in joules, rather than the molar value in kilojoules.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert kilojoules to joules when calculating the energy per atom, resulting in an energy that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Energy per atom=418.86.022×1023=6.955×10−22 J\text{Energy per atom} = \frac{418.8}{6.022 \times 10^{23}} = 6.955 \times 10^{-22}\text{ J}

    Correct

    Eatom=418.8×103 J/mol6.022×1023 mol−1=6.955×10−19 JE_{\text{atom}} = \frac{418.8 \times 10^3\text{ J/mol}}{6.022 \times 10^{23}\text{ mol}^{-1}} = 6.955 \times 10^{-19}\text{ J}

    You divided the ionization energy by Avogadro's number, but the given value was 418.8 kJ/mol418.8\text{ kJ/mol}, not J/mol\text{J/mol}. You need to multiply by 103 J/kJ10^3\text{ J/kJ} before labeling the resulting energy per atom in joules.

  2. Step 2

    Energy in eV=6.955×10−22 J1.602×10−19 J/eV=0.00434 eV\text{Energy in eV} = \frac{6.955 \times 10^{-22}\text{ J}}{1.602 \times 10^{-19}\text{ J/eV}} = 0.00434\text{ eV}

    Correct

    IE1=6.955×10−19 J1.602×10−19 J/eV=4.34 eVIE_1 = \frac{6.955 \times 10^{-19}\text{ J}}{1.602 \times 10^{-19}\text{ J/eV}} = 4.34\text{ eV}

    You applied the conversion factor between joules and electron-volts correctly, but the result is off by a factor of 10310^3 because of the uncorrected energy from Step 1.

  3. Step 3

    λ=hcE  ⟹  λ=6.626×10−34×2.998×1086.955×10−22  ⟹  λ=2.856×10−4 m=2.86×105 nm\lambda = \frac{hc}{E} \implies \lambda = \frac{6.626 \times 10^{-34} \times 2.998 \times 10^8}{6.955 \times 10^{-22}} \implies \lambda = 2.856 \times 10^{-4}\text{ m} = 2.86 \times 10^5\text{ nm}

    Correct

    λmax=(6.626×10−34 J⋅s)(2.998×108 m/s)6.955×10−19 J=2.856×10−7 m=286 nm\lambda_{\text{max}} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(2.998 \times 10^8\text{ m/s})}{6.955 \times 10^{-19}\text{ J}} = 2.856 \times 10^{-7}\text{ m} = 286\text{ nm}

    You correctly used the de Broglie/Planck relation λ=hcE\lambda = \frac{hc}{E} and correctly converted meters to nanometers, but substituting the incorrect energy gave a wavelength that is 10001000 times too large.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly divided by Avogadro's number to find the energy associated with a single atom.

You used the correct conversion factor (1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J}) to convert energy to electron-volts.

You correctly identified and rearranged the photon energy formula λ=hcE\lambda = \frac{hc}{E}.

You accurately converted meters to nanometers by multiplying by 109 nm/m10^9\text{ nm/m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion: kJ to J

You dropped the metric prefix kilo- when substituting 418.8 kJ/mol418.8\text{ kJ/mol}, labeling the quotient directly as joules instead of kilojoules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking metric prefixes during unit cancellation between macroscopic quantities (kJ/mol\text{kJ/mol}) and microscopic quantum equations (which require SI base units, J\text{J}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Thermodynamic Quantities to SI Base Units
  • Thermodynamic and thermochemical values are standardly tabulated in kJ/mol\text{kJ/mol}, but Planck's constant (hh) and the electron-volt conversion factor use joules (J\text{J}). Always multiply kilojoules by 10310^3 to get joules before computing photon properties.

  • Check every energy value for the prefix k\text{k} before substituting it into E=hνE = h\nu or E=hcλE = \frac{hc}{\lambda}.

Reasonableness Check on Atomic Scale Values
  • First ionization energies for neutral atoms typically range between 3 eV3\text{ eV} and 25 eV25\text{ eV} (10−19 J10^{-19}\text{ J} to 10−18 J10^{-18}\text{ J}), and ionizing photons typically lie in the ultraviolet or soft X-ray region (50 nm50\text{ nm} to 400 nm400\text{ nm}).

  • If your calculated ionization energy is around 0.004 eV0.004\text{ eV} or your ionizing wavelength is in the infrared/microwave range (105 nm10^5\text{ nm}), immediately check for a missing factor of 10001000.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Eatom=418.8×103 J/mol6.022×1023 atoms/mol=6.955×10−19 J/atomE_{\text{atom}} = \frac{418.8 \times 10^3\text{ J/mol}}{6.022 \times 10^{23}\text{ atoms/mol}} = 6.955 \times 10^{-19}\text{ J/atom}

  2. Energy in eV=6.955×10−19 J1.602×10−19 J/eV=4.341 eV≈4.34 eV\text{Energy in eV} = \frac{6.955 \times 10^{-19}\text{ J}}{1.602 \times 10^{-19}\text{ J/eV}} = 4.341\text{ eV} \approx 4.34\text{ eV}

  3. λmax=hcEatom=(6.626×10−34 J⋅s)(2.998×108 m/s)6.955×10−19 J=2.856×10−7 m\lambda_{\text{max}} = \frac{hc}{E_{\text{atom}}} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(2.998 \times 10^8\text{ m/s})}{6.955 \times 10^{-19}\text{ J}} = 2.856 \times 10^{-7}\text{ m}

  4. λmax=2.856×10−7 m×109 nm/m≈286 nm\lambda_{\text{max}} = 2.856 \times 10^{-7}\text{ m} \times 10^9\text{ nm/m} \approx 286\text{ nm}

Final answer

(a) 4.34 eV/atom4.34\text{ eV/atom}; (b) 286 nm286\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out full unit fractions explicitly (e.g., 418.8 kJ1 mol×1000 J1 kJ×1 mol6.022×1023 atoms\frac{418.8\text{ kJ}}{1\text{ mol}} \times \frac{1000\text{ J}}{1\text{ kJ}} \times \frac{1\text{ mol}}{6.022 \times 10^{23}\text{ atoms}}) instead of substituting numbers without units.

  • Memorize the benchmark that typical single-atom valence electron transitions and ionizations correspond to a few electron-volts (1–10 eV1\text{--}10\text{ eV}) and UV/visible wavelengths.

OverviewACEpath Teacher's Diagnosis

02 The student uses the molar ionization energy directly instead of the single-atom energy in the photon wavelength equation, producing an erroneously short wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Energy per atom=418800 J/mol6.022×1023 mol−1=6.955×10−19 J  ⟹  Energy in eV=6.955×10−19 J1.602×10−19 J/eV=4.34 eV\text{Energy per atom} = \frac{418800\text{ J/mol}}{6.022 \times 10^{23}\text{ mol}^{-1}} = 6.955 \times 10^{-19}\text{ J} \implies \text{Energy in eV} = \frac{6.955 \times 10^{-19}\text{ J}}{1.602 \times 10^{-19}\text{ J/eV}} = 4.34\text{ eV}

  2. Step 2

    E=418.8 kJ=418800 J  ⟹  λ=hcE=(6.626×10−34)(2.998×108)418800E = 418.8\text{ kJ} = 418800\text{ J} \implies \lambda = \frac{hc}{E} = \frac{(6.626 \times 10^{-34})(2.998 \times 10^8)}{418800}

    Correct

    λmax=hcEatom=(6.626×10−34 J⋅s)(2.998×108 m/s)6.955×10−19 J\lambda_{\text{max}} = \frac{hc}{E_{\text{atom}}} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(2.998 \times 10^8\text{ m/s})}{6.955 \times 10^{-19}\text{ J}}

    A single incident photon interacts with and ionizes a single potassium atom, so EE must be the ionization energy per atom (6.955×10−19 J6.955 \times 10^{-19}\text{ J}), not the energy per mole (418800 J418800\text{ J}).

  3. Step 3

    λ=4.74×10−22 nm\lambda = 4.74 \times 10^{-22}\text{ nm}

    Correct

    λmax=2.856×10−7 m=286 nm\lambda_{\text{max}} = 2.856 \times 10^{-7}\text{ m} = 286\text{ nm}

    Using the molar energy instead of the single-atom energy caused your final calculated wavelength to be many orders of magnitude too small.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the molar ionization energy into joules per individual atom.

You correctly applied the conversion factor between joules and electron-volts to obtain 4.34 eV4.34\text{ eV}.

You correctly identified the inverse relation λ=hcE\lambda = \frac{hc}{E} between photon energy and wavelength.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Molar vs. Molecular Scale Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused macroscopic molar energy (J/mol\text{J/mol}) with microscopic single-photon/single-atom energy (J/atom\text{J/atom}) when setting up the Planck-Einstein relation E=hcλE = \frac{hc}{\lambda}. Because photoionization is a 1-to-1 event (one photon ejects one electron from one atom), the energy EE in E=hcλE = \frac{hc}{\lambda} must always represent the energy of a single photon and single atom.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scale Matching in Quantum Equations
  • The Planck-Einstein relation E=hν=hcλE = h\nu = \frac{hc}{\lambda} applies on a per-photon basis; it can only be paired directly with single-atom or single-molecule energies, never with macroscopic molar values.

  • Before substituting into λ=hcE\lambda = \frac{hc}{E}, always check your energy unit: if it contains 'per mole', divide by NAN_A first.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the energy required to ionize a single atom calculated in part (a): Eatom=6.955×10−19 JE_{\text{atom}} = 6.955 \times 10^{-19}\text{ J}.

  2. Substitute this single-atom energy into the wavelength equation: λmax=hcEatom=(6.626×10−34 J⋅s)(2.998×108 m/s)6.955×10−19 J≈2.856×10−7 m\lambda_{\text{max}} = \frac{hc}{E_{\text{atom}}} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(2.998 \times 10^8\text{ m/s})}{6.955 \times 10^{-19}\text{ J}} \approx 2.856 \times 10^{-7}\text{ m}.

  3. Convert the result from meters to nanometers: λmax=2.856×10−7 m×109 nm/m≈286 nm\lambda_{\text{max}} = 2.856 \times 10^{-7}\text{ m} \times 10^9\text{ nm/m} \approx 286\text{ nm}.

Final answer

(a) IE1=4.34 eV/atomIE_1 = 4.34\text{ eV/atom}; (b) λmax=286 nm\lambda_{\text{max}} = 286\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your calculated wavelength against physical intuition: electromagnetic radiation capable of ionizing outer electrons typically lies in the ultraviolet or visible region (100–800 nm100\text{–}800\text{ nm}), whereas 10−22 nm10^{-22}\text{ nm} is smaller than an atomic nucleus.

  • Practice setting up conversion chains where you write explicit unit fractions like 1 mol6.022×1023 photons\frac{1\text{ mol}}{6.022 \times 10^{23}\text{ photons}} to make sure molar units cancel out before using E=hcλE = \frac{hc}{\lambda}.

OverviewACEpath Teacher's Diagnosis

03 The student substitutes the energy in units of electron-volts directly into λ = hc/E where Planck's constant is in joule-seconds, causing a unit mismatch.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E=418.8×103 J6.022×1023=6.955×10−19 JE = \frac{418.8 \times 10^3\text{ J}}{6.022 \times 10^{23}} = 6.955 \times 10^{-19}\text{ J}

  2. Step 2

    E in eV=6.955×10−191.602×10−19=4.34 eVE\text{ in eV} = \frac{6.955 \times 10^{-19}}{1.602 \times 10^{-19}} = 4.34\text{ eV}

  3. Step 3

    λ=hcE  ⟹  λ=6.626×10−34×2.998×1084.34\lambda = \frac{hc}{E} \implies \lambda = \frac{6.626 \times 10^{-34} \times 2.998 \times 10^8}{4.34}

    Correct

    λmax=hcE=(6.626×10−34 J⋅s)(2.998×108 m/s)6.955×10−19 J\lambda_{\text{max}} = \frac{hc}{E} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(2.998 \times 10^8\text{ m/s})}{6.955 \times 10^{-19}\text{ J}}

    You recalled the formula λ=hcE\lambda = \frac{hc}{E} correctly, but you substituted E=4.34 eVE = 4.34\text{ eV} in the denominator instead of E=6.955×10−19 JE = 6.955 \times 10^{-19}\text{ J}. Because hh is given in J⋅s\text{J}\cdot\text{s}, the energy must also be in joules for the units of energy to cancel.

  4. Step 4

    λ=4.577×10−26 m=4.58×10−17 nm\lambda = 4.577 \times 10^{-26}\text{ m} = 4.58 \times 10^{-17}\text{ nm}

    Correct

    λmax=2.856×10−7 m=286 nm\lambda_{\text{max}} = 2.856 \times 10^{-7}\text{ m} = 286\text{ nm}

    Your conversion from meters to nanometers used the correct factor, but the numerical value was affected by using energy in eV\text{eV} in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted the molar ionization energy to energy per atom correctly.

You used the electron-volt conversion factor correctly to obtain 4.34 eV4.34\text{ eV}.

You identified the inverse relationship between photon energy and wavelength, λ=hcE\lambda = \frac{hc}{E}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Mismatch in Photon Energy Equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the energy expressed in electron-volts directly into λ=hcE\lambda = \frac{hc}{E} without ensuring that its energy unit matched the energy unit of Planck's constant (hh in J⋅s\text{J}\cdot\text{s}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency Check
  • In λ=hcE\lambda = \frac{hc}{E}, if hh is in J⋅s\text{J}\cdot\text{s} and cc is in m/s\text{m/s}, then EE must be in joules (J\text{J}) to yield λ\lambda in meters (m\text{m}).

  • Always write out explicit units beside each variable during substitution: (J⋅s)(m/s)J=m\frac{(\text{J}\cdot\text{s})(\text{m/s})}{\text{J}} = \text{m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute E=6.955×10−19 JE = 6.955 \times 10^{-19}\text{ J} into λmax=hcE\lambda_{\text{max}} = \frac{hc}{E}:

  2. λmax=(6.626×10−34 J⋅s)(2.998×108 m/s)6.955×10−19 J≈2.856×10−7 m\lambda_{\text{max}} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(2.998 \times 10^8\text{ m/s})}{6.955 \times 10^{-19}\text{ J}} \approx 2.856 \times 10^{-7}\text{ m}

  3. Convert meters to nanometers by multiplying by 109 nm/m10^9\text{ nm/m}:

  4. λmax=2.856×10−7 m×109 nm1 m=285.6 nm≈286 nm\lambda_{\text{max}} = 2.856 \times 10^{-7}\text{ m} \times \frac{10^9\text{ nm}}{1\text{ m}} = 285.6\text{ nm} \approx 286\text{ nm}

Final answer

(a) IE1=4.34 eV/atomIE_1 = 4.34\text{ eV/atom}; (b) λmax=286 nm\lambda_{\text{max}} = 286\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before evaluating expressions with physical constants, write down the units of each variable and check that the base units cancel properly.

  • Remember that hc≈1240 eV⋅nmhc \approx 1240\text{ eV}\cdot\text{nm}; if you choose to work with energy in eV\text{eV}, you can use that combined constant directly to find wavelength in nanometers.

Lock it in

Similar question

01

The first ionization energy of sodium is 495.8 kJ/mol495.8\text{ kJ/mol}. Calculate the energy required to ionize a single sodium atom in joules (J\text{J}) and in electron-volts (eV\text{eV}). Round both to three significant figures.

Answer

Eatom=495.8×103 J/mol6.022×1023 mol−1=8.233×10−19 J≈8.23×10−19 JE_{\text{atom}} = \frac{495.8 \times 10^3\text{ J/mol}}{6.022 \times 10^{23}\text{ mol}^{-1}} = 8.233 \times 10^{-19}\text{ J} \approx 8.23 \times 10^{-19}\text{ J}. In eV\text{eV}: 8.233×10−19 J1.602×10−19 J/eV=5.139 eV≈5.14 eV\frac{8.233 \times 10^{-19}\text{ J}}{1.602 \times 10^{-19}\text{ J/eV}} = 5.139\text{ eV} \approx 5.14\text{ eV}.

02

The threshold wavelength to eject a photoelectron from a cesium surface is 653 nm653\text{ nm}. Determine the work function of cesium in both eV/atom\text{eV/atom} and kJ/mol\text{kJ/mol}. (h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s}, c=2.998×108 m/sc = 2.998 \times 10^8\text{ m/s})

Answer

Energy per atom: E=hcλ=(6.626×10−34)(2.998×108)653×10−9 m=3.042×10−19 J=1.90 eV/atomE = \frac{hc}{\lambda} = \frac{(6.626 \times 10^{-34})(2.998 \times 10^8)}{653 \times 10^{-9}\text{ m}} = 3.042 \times 10^{-19}\text{ J} = 1.90\text{ eV/atom}. In kJ/mol\text{kJ/mol}: Emolar=(3.042×10−19 J)×(6.022×1023 mol−1)×10−3 kJ/J=183 kJ/molE_{\text{molar}} = (3.042 \times 10^{-19}\text{ J}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) \times 10^{-3}\text{ kJ/J} = 183\text{ kJ/mol}.

03

A gaseous sample of lithium atoms (IE1=520.2 kJ/molIE_1 = 520.2\text{ kJ/mol}) is irradiated with light of wavelength 200.0 nm200.0\text{ nm}. Determine whether photoionization occurs, and if so, calculate the maximum kinetic energy (in eV\text{eV}) of the ejected photoelectron.

Answer

Energy of 200.0 nm200.0\text{ nm} photon: Ephoton=hcλ=1.9865×10−25 J⋅m200.0×10−9 m=9.932×10−19 J=6.200 eVE_{\text{photon}} = \frac{hc}{\lambda} = \frac{1.9865 \times 10^{-25}\text{ J}\cdot\text{m}}{200.0 \times 10^{-9}\text{ m}} = 9.932 \times 10^{-19}\text{ J} = 6.200\text{ eV}. Energy to ionize one Li atom: IE1=520.2×1036.022×1023=8.638×10−19 J=5.392 eVIE_1 = \frac{520.2 \times 10^3}{6.022 \times 10^{23}} = 8.638 \times 10^{-19}\text{ J} = 5.392\text{ eV}. Since Ephoton>IE1E_{\text{photon}} > IE_1, photoionization occurs. Maximum kinetic energy: KEmax=6.200 eV−5.392 eV=0.808 eVKE_{\text{max}} = 6.200\text{ eV} - 5.392\text{ eV} = 0.808\text{ eV}.

Loading workspace…