Resources
In a closed, rigid vessel held at , of volatile liquid acetone (, molar mass ) is introduced into evacuated space. At , the equilibrium vapor pressure of acetone is . Coupling the ideal gas law (, with ) and dynamic phase equilibrium principles, calculate the remaining mass of liquid acetone in grams at equilibrium.
Answer and steps
Final answer
Steps
Understand the Dynamic Phase Equilibrium
When a volatile liquid is injected into an evacuated, closed container, it evaporates until the rate of evaporation equals the rate of condensation. At dynamic equilibrium:
- The gas phase exerts a fixed partial pressure equal to the equilibrium vapor pressure () at that temperature, provided there is sufficient liquid present.
- The total moles of acetone are partitioned between the vapor phase and the liquid phase:
Convert Units to Match the Ideal Gas Constant
To use , convert the temperature and pressure into kelvins and atmospheres:
- Absolute Temperature ():
- Equilibrium Vapor Pressure ():
(Note: The volume of the liquid acetone is very small compared to the vessel, so the gas volume is taken as .)
Calculate Moles of Acetone in the Vapor Phase
Apply the ideal gas law () to find the moles of acetone vapor, , needed to reach the equilibrium vapor pressure:
Determine Remaining Liquid Moles and Mass
Subtract the moles in the vapor phase from the total initial moles to find the remaining liquid moles:
Because , liquid acetone is indeed present at equilibrium, confirming that the pressure inside reaches the full vapor pressure of .
Convert the remaining moles of liquid acetone to mass using its molar mass ():
Typical errors
01 The student calculates the mass of acetone present in the vapor phase rather than subtracting it from the initial total to find the remaining liquid mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You converted the vapor moles directly to mass, giving the mass of acetone vapor () rather than the remaining liquid acetone ().
WHAT YOU DID WELL
Compliments from Your TeacherYou accurately converted the given temperature into kelvins and pressure into atmospheres.
You set up and evaluated the ideal gas law correctly to determine the amount of substance in the vapor phase.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou stopped after calculating the mass of the evaporated acetone rather than finding the remaining liquid.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the quantity derived from the gas law () with the requested quantity () in a two-phase closed system.
REASONING PATH
Your ACEpath teacher’s suggested approach- Phase Mass Balance
In a closed system with liquid and vapor in equilibrium: .
Always subtract the vapor moles from the initial moles to determine the moles of liquid remaining.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind remaining liquid moles: .
Multiply by molar mass: .
02 The student uses temperature in Celsius directly in the ideal gas equation instead of converting to Kelvin.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used directly. The ideal gas constant requires absolute temperature in kelvins: .
- Step 3Correct
Your subtraction step follows the correct mole balance , but the result is negative because was calculated with an incorrect temperature.
- Step 4Correct
You correctly multiplied moles by molar mass, but the final numerical value carries forward the error from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the equilibrium vapor pressure from to .
You correctly identified the ideal gas equation to determine the moles of vapor.
You used the correct conservation of mass relationship .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou forgot to convert the temperature from degrees Celsius to kelvins before evaluating .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the unit requirements embedded in the gas constant , where temperature must always be expressed on the absolute Kelvin scale ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Alignment with the Gas Constant
The ideal gas constant has units of kelvins () in the denominator, never degrees Celsius.
Always convert temperature immediately: .
- Physical Reality Check
Mass and mole quantities in a physical system can never be negative.
If your remaining moles or mass evaluate to a negative number, stop and verify whether your vapor calculation overestimated the gas phase.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert temperature to kelvins: .
Calculate vapor moles: .
Find remaining liquid moles: .
Convert remaining moles to grams: .
03 The student forgets to convert pressure from mmHg to atm when applying the ideal gas constant R.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used directly without converting it to atmospheres, whereas requires pressure in .
- Step 3Correct
Your mole-balance logic was sound, but subtracting the inflated vapor mole value produced an impossible negative quantity of liquid.
- Step 4Correct
You multiplied by the molar mass correctly, but the result carried forward the earlier unit error.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted the Celsius temperature to absolute temperature in kelvins correctly.
You correctly recognized that the moles of remaining liquid equal initial total moles minus vapor moles.
You applied the correct molar mass factor to convert moles of acetone into grams.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou forgot to divide by before substituting it into .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou paired numerical values from the prompt into the ideal gas law without verifying that the pressure unit matched the pressure dimension of the chosen gas constant .
REASONING PATH
Your ACEpath teacher’s suggested approach- Match units to R
When using , pressure must be expressed in atmospheres ().
Divide pressure in or by before computing moles.
- Physical sanity check
Mass and mole quantities in closed physical systems cannot be negative.
If your calculated liquid moles are negative, check whether all volatile liquid evaporated or whether an erroneous pressure unit inflated .
CORRECTED PATH
ACEpath Teacher's DemonstrationLock it in
In a closed container containing a liquid and its vapor at equilibrium, how are the moles of liquid () related to the initial total moles ()?
, where is calculated using at the equilibrium vapor pressure.
Similar question
A evacuated flask at receives of liquid ethanol (). At equilibrium, ethanol's vapor pressure is . Calculate the mass of liquid ethanol remaining at equilibrium. ()
Answer
. First, and . Moles of vapor: . Remaining liquid: . Mass of liquid: .
A rigid chamber at contains of liquid water (). The vapor pressure of water at is . Determine whether any liquid water remains at equilibrium, and if so, calculate its remaining mass.
Answer
liquid remains. Total moles introduced: . Vapor pressure: ; . Moles needed to saturate: , so liquid remains. Mass remaining: .
A sealed container held at has an unknown volatile liquid (). When of the liquid is added, of liquid remains at equilibrium. Assuming the liquid volume is negligible, calculate the equilibrium vapor pressure of this substance in at .
Answer
. Mass evaporated: . Moles of vapor: . Using with : . Convert to : .