Resources

An elementary gas-phase isomerization reaction proceeds along a reaction coordinate where the initial reactant state sits at an energy level of 62.0 kJ/mol62.0\text{ kJ/mol}. The reaction is endothermic with a standard reaction enthalpy of ΔH=+38.0 kJ/mol\Delta H = +38.0\text{ kJ/mol}. If the activation energy of the forward direction is measured to be 84.0 kJ/mol84.0\text{ kJ/mol}, determine the absolute potential energy of the transition state (ETSE_{\text{TS}}) and the activation energy of the reverse reaction (Ea, reverseE_{\text{a, reverse}}).

Answer and steps

Final answer

ETS=146.0 kJ/molE_{\text{TS}} = 146.0\text{ kJ/mol}, Ea, reverse=46.0 kJ/molE_{\text{a, reverse}} = 46.0\text{ kJ/mol}.

Steps

01

Calculate the Potential Energy of the Transition State (ETSE_{\text{TS}})

To determine the energy values along the reaction coordinate, we use the relationships between the energy levels of the reactants, products, transition state, and the activation energy barriers.

The forward activation energy (Ea, forwardE_{\text{a, forward}}) represents the energy barrier that reactants must overcome to reach the transition state:

Ea, forward=ETS−EreactantsE_{\text{a, forward}} = E_{\text{TS}} - E_{\text{reactants}}

Rearranging to solve for the absolute potential energy of the transition state:

ETS=Ereactants+Ea, forwardE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}}

Substitute the given values:

ETS=62.0 kJ/mol+84.0 kJ/mol=146.0 kJ/molE_{\text{TS}} = 62.0\text{ kJ/mol} + 84.0\text{ kJ/mol} = 146.0\text{ kJ/mol}


02

Calculate the Activation Energy of the Reverse Reaction (Ea, reverseE_{\text{a, reverse}})

Method 1: Using the Enthalpy Change (ΔH\Delta H)

For an elementary reaction, the net enthalpy change equals the difference between the forward and reverse activation energies:

ΔH=Ea, forward−Ea, reverse\Delta H = E_{\text{a, forward}} - E_{\text{a, reverse}}

Rearranging for Ea, reverseE_{\text{a, reverse}}:

Ea, reverse=Ea, forward−ΔHE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H

Substitute the given values:

Ea, reverse=84.0 kJ/mol−38.0 kJ/mol=46.0 kJ/molE_{\text{a, reverse}} = 84.0\text{ kJ/mol} - 38.0\text{ kJ/mol} = 46.0\text{ kJ/mol}

Method 2: Using the Product Energy Level

First, find the absolute energy of the products:

Eproducts=Ereactants+ΔH=62.0 kJ/mol+38.0 kJ/mol=100.0 kJ/molE_{\text{products}} = E_{\text{reactants}} + \Delta H = 62.0\text{ kJ/mol} + 38.0\text{ kJ/mol} = 100.0\text{ kJ/mol}

Then, calculate the reverse activation energy as the barrier from products to the transition state:

Ea, reverse=ETS−Eproducts=146.0 kJ/mol−100.0 kJ/mol=46.0 kJ/molE_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}} = 146.0\text{ kJ/mol} - 100.0\text{ kJ/mol} = 46.0\text{ kJ/mol}

Common Pitfall: For an endothermic reaction, ΔH>0\Delta H > 0, meaning the products sit higher in energy than the reactants (Eproducts>EreactantsE_{\text{products}} > E_{\text{reactants}}). Consequently, the reverse activation energy must be smaller than the forward activation energy (Ea, reverse<Ea, forwardE_{\text{a, reverse}} < E_{\text{a, forward}}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sign relationship between activation energies and enthalpy change by adding ΔH to the forward activation energy instead of subtracting it, yielding an incorrect reverse activation energy of 122.0 kJ/mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ETS=62.0+84.0  ⟹  ETS=146.0 kJ/molE_{\text{TS}} = 62.0 + 84.0 \implies E_{\text{TS}} = 146.0\text{ kJ/mol}

  2. Step 2

    Ea, reverse=Ea, forward+ΔH  ⟹  Ea, reverse=84.0+38.0  ⟹  Ea, reverse=122.0 kJ/molE_{\text{a, reverse}} = E_{\text{a, forward}} + \Delta H \implies E_{\text{a, reverse}} = 84.0 + 38.0 \implies E_{\text{a, reverse}} = 122.0\text{ kJ/mol}

    Correct

    Ea, reverse=Ea, forward−ΔH=84.0−38.0=46.0 kJ/molE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H = 84.0 - 38.0 = 46.0\text{ kJ/mol}

    Because the overall reaction is endothermic (ΔH=Ea, forward−Ea, reverse\Delta H = E_{\text{a, forward}} - E_{\text{a, reverse}}), the reverse activation energy must be smaller than the forward barrier: Ea, reverse=Ea, forward−ΔHE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the transition state energy to the reactant ground state and the forward activation energy.

You performed accurate arithmetic in your initial sum to get 146.0 kJ/mol146.0\text{ kJ/mol}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula sign error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the sign relationship between reaction enthalpy and activation energies. For any elementary step, ΔH=Ea, forward−Ea, reverse\Delta H = E_{\text{a, forward}} - E_{\text{a, reverse}}. In an endothermic reaction (ΔH>0\Delta H > 0), products sit higher in energy than reactants, which means the reverse barrier from products to transition state must be shorter than the forward barrier.

REASONING PATH
Your ACEpath teacher’s suggested approach
Enthalpy and Barrier Height Relationship
  • ΔH=Ea, forward−Ea, reverse\Delta H = E_{\text{a, forward}} - E_{\text{a, reverse}}, which rearranges to Ea, reverse=Ea, forward−ΔHE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H.

  • Check the sign of ΔH\Delta H: if ΔH>0\Delta H > 0 (endothermic), ensure Ea, reverse<Ea, forwardE_{\text{a, reverse}} < E_{\text{a, forward}}; if ΔH<0\Delta H < 0 (exothermic), ensure Ea, reverse>Ea, forwardE_{\text{a, reverse}} > E_{\text{a, forward}}.

Two-Step Energy Diagram Verification
  • Eproducts=Ereactants+ΔHE_{\text{products}} = E_{\text{reactants}} + \Delta H, and Ea, reverse=ETS−EproductsE_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}}.

  • Calculate the product energy level first (62.0+38.0=100.0 kJ/mol62.0 + 38.0 = 100.0\text{ kJ/mol}), then subtract it from ETSE_{\text{TS}} (146.0−100.0=46.0 kJ/mol146.0 - 100.0 = 46.0\text{ kJ/mol}) to confirm your result visually.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange the fundamental relationship ΔH=Ea, forward−Ea, reverse\Delta H = E_{\text{a, forward}} - E_{\text{a, reverse}} to isolate the reverse activation energy: Ea, reverse=Ea, forward−ΔHE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H.

  2. Substitute the given forward activation energy and enthalpy change: Ea, reverse=84.0 kJ/mol−38.0 kJ/mol=46.0 kJ/molE_{\text{a, reverse}} = 84.0\text{ kJ/mol} - 38.0\text{ kJ/mol} = 46.0\text{ kJ/mol}.

Final answer

ETS=146.0 kJ/molE_{\text{TS}} = 146.0\text{ kJ/mol}, Ea, reverse=46.0 kJ/molE_{\text{a, reverse}} = 46.0\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick potential energy diagram before writing formulas to visually inspect whether the reverse barrier should be taller or shorter than the forward barrier.

  • Practice rearranging ΔH=Ea, forward−Ea, reverse\Delta H = E_{\text{a, forward}} - E_{\text{a, reverse}} for both exothermic and endothermic systems.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the activation energy as relative to the reference zero rather than the reactant state, subtracting the initial reactant energy from the forward activation energy to get E_TS = 22.0 kJ/mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ETS=Ea, forward−Ereactants  ⟹  ETS=84.0−62.0=22.0 kJ/molE_{\text{TS}} = E_{\text{a, forward}} - E_{\text{reactants}} \implies E_{\text{TS}} = 84.0 - 62.0 = 22.0\text{ kJ/mol}

    Correct

    ETS=Ereactants+Ea, forward=62.0+84.0=146.0 kJ/molE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}} = 62.0 + 84.0 = 146.0\text{ kJ/mol}

    The forward activation energy is the height of the barrier starting from the reactant energy level up to the transition state peak (Ea, forward=ETS−EreactantsE_{\text{a, forward}} = E_{\text{TS}} - E_{\text{reactants}}). Solving for the transition state energy requires adding the forward activation energy to the reactant energy, not subtracting it.

  2. Step 2

    Ea, reverse=Ea, forward−ΔH  ⟹  Ea, reverse=84.0−38.0=46.0 kJ/molE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H \implies E_{\text{a, reverse}} = 84.0 - 38.0 = 46.0\text{ kJ/mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the relationship between reaction enthalpy and forward/reverse activation energies to calculate Ea, reverseE_{\text{a, reverse}}.

You maintained correct units and arithmetic across your substitution steps.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign/algebraic inversion in transition state definition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the activation energy as an absolute energy value rather than a relative height above the reactant baseline, leading to an inverted subtraction (ETS=Ea−EreactantsE_{\text{TS}} = E_{\text{a}} - E_{\text{reactants}} instead of ETS=Ereactants+EaE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Transition State Peak Definition
  • The transition state represents the highest potential energy on the profile, so its absolute energy must be greater than the reactant energy: ETS=Ereactants+Ea, forwardE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}}.

  • Sketch a simple energy coordinate curve before writing algebraic formulas to verify whether you need to add or subtract heights.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the fundamental definition of forward activation energy: Ea, forward=ETS−EreactantsE_{\text{a, forward}} = E_{\text{TS}} - E_{\text{reactants}}.

  2. Isolate ETSE_{\text{TS}} by adding EreactantsE_{\text{reactants}} to both sides: ETS=Ereactants+Ea, forwardE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}}.

  3. Substitute the known values: ETS=62.0 kJ/mol+84.0 kJ/mol=146.0 kJ/molE_{\text{TS}} = 62.0\text{ kJ/mol} + 84.0\text{ kJ/mol} = 146.0\text{ kJ/mol}.

Final answer

ETS=146.0 kJ/molE_{\text{TS}} = 146.0\text{ kJ/mol}, Ea, reverse=46.0 kJ/molE_{\text{a, reverse}} = 46.0\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how potential energy diagrams represent barriers as vertical differences from an initial plateau.

  • Practice identifying whether a transition state energy should be higher or lower than the reactants before calculating.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the product energy level with the reverse activation energy, calculating E_products = 100.0 kJ/mol and reporting it as E_a,reverse.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ETS=62.0+84.0=146.0 kJ/molE_{\text{TS}} = 62.0 + 84.0 = 146.0\text{ kJ/mol}

  2. Step 2

    Ea, reverse=Ereactants+ΔH  ⟹  Ea, reverse=62.0+38.0  ⟹  Ea, reverse=100.0 kJ/molE_{\text{a, reverse}} = E_{\text{reactants}} + \Delta H \implies E_{\text{a, reverse}} = 62.0 + 38.0 \implies E_{\text{a, reverse}} = 100.0\text{ kJ/mol}

    Correct

    Eproducts=Ereactants+ΔH=100.0 kJ/mol  ⟹  Ea, reverse=ETS−Eproducts=146.0 kJ/mol−100.0 kJ/mol=46.0 kJ/molE_{\text{products}} = E_{\text{reactants}} + \Delta H = 100.0\text{ kJ/mol} \implies E_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}} = 146.0\text{ kJ/mol} - 100.0\text{ kJ/mol} = 46.0\text{ kJ/mol}

    You calculated Ereactants+ΔHE_{\text{reactants}} + \Delta H, which represents the absolute energy level of the products (EproductsE_{\text{products}}), not the reverse activation energy. The reverse activation energy is the barrier height from the products up to the transition state: Ea, reverse=ETS−Eproducts=46.0 kJ/molE_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}} = 46.0\text{ kJ/mol} (or Ea, forward−ΔHE_{\text{a, forward}} - \Delta H).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the relationship between the reactant baseline, forward activation energy, and transition state energy.

You correctly calculated the sum 62.0+38.0=100.0 kJ/mol62.0 + 38.0 = 100.0\text{ kJ/mol}, which accurately gives the potential energy of the products.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing state energy level with activation energy barrier

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the absolute potential energy of the final state (EproductsE_{\text{products}}) with the energy barrier required for the reverse reaction (Ea, reverseE_{\text{a, reverse}}). Activation energies are always relative vertical differences measured from a ground state up to the transition state peak.

REASONING PATH
Your ACEpath teacher’s suggested approach
State Energy vs. Barrier Height
  • Eproducts=Ereactants+ΔHE_{\text{products}} = E_{\text{reactants}} + \Delta H, whereas Ea, reverse=ETS−EproductsE_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}}.

  • Always verify whether an energy quantity represents an absolute baseline level on the y-axis or a vertical difference between two levels.

Activation Energy Enthalpy Identity
  • For an elementary step, ΔH=Ea, forward−Ea, reverse\Delta H = E_{\text{a, forward}} - E_{\text{a, reverse}}.

  • Rearrange the identity directly to find Ea, reverse=Ea, forward−ΔHE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H to bypass the absolute product energy step.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that your value 100.0 kJ/mol100.0\text{ kJ/mol} is the absolute energy of the products: Eproducts=100.0 kJ/molE_{\text{products}} = 100.0\text{ kJ/mol}.

  2. Calculate the reverse activation barrier from the product level to the transition state: Ea, reverse=ETS−Eproducts=146.0 kJ/mol−100.0 kJ/mol=46.0 kJ/molE_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}} = 146.0\text{ kJ/mol} - 100.0\text{ kJ/mol} = 46.0\text{ kJ/mol}.

Final answer

ETS=146.0 kJ/molE_{\text{TS}} = 146.0\text{ kJ/mol}, Ea, reverse=46.0 kJ/molE_{\text{a, reverse}} = 46.0\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick potential energy curve before writing equations, marking EreactantsE_{\text{reactants}}, EproductsE_{\text{products}}, and ETSE_{\text{TS}} on the vertical axis.

  • Double-check that every activation energy arrow points from a well (reactants or products) up to the peak (transition state).

Lock it in

Similar question

01

An elementary step has an initial reactant energy of 45.0 kJ/mol45.0\text{ kJ/mol}, a forward activation energy of 65.0 kJ/mol65.0\text{ kJ/mol}, and a reaction enthalpy of ΔH=+20.0 kJ/mol\Delta H = +20.0\text{ kJ/mol}. Calculate ETSE_{\text{TS}} and Ea, reverseE_{\text{a, reverse}}.

Answer

ETS=110.0 kJ/molE_{\text{TS}} = 110.0\text{ kJ/mol}, Ea, reverse=45.0 kJ/molE_{\text{a, reverse}} = 45.0\text{ kJ/mol}. Steps: ETS=45.0+65.0=110.0 kJ/molE_{\text{TS}} = 45.0 + 65.0 = 110.0\text{ kJ/mol}. Ea, reverse=Ea, forward−ΔH=65.0−20.0=45.0 kJ/molE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H = 65.0 - 20.0 = 45.0\text{ kJ/mol} (or Eproducts=45.0+20.0=65.0 kJ/molE_{\text{products}} = 45.0 + 20.0 = 65.0\text{ kJ/mol}, then 110.0−65.0=45.0 kJ/mol110.0 - 65.0 = 45.0\text{ kJ/mol}).

02

A reaction has a transition state potential energy of 180.0 kJ/mol180.0\text{ kJ/mol} and an exothermic enthalpy change of ΔH=−50.0 kJ/mol\Delta H = -50.0\text{ kJ/mol}. If the product energy level is 70.0 kJ/mol70.0\text{ kJ/mol}, find the reactant energy level, Ea, forwardE_{\text{a, forward}}, and Ea, reverseE_{\text{a, reverse}}.

Answer

Ereactants=120.0 kJ/molE_{\text{reactants}} = 120.0\text{ kJ/mol}, Ea, forward=60.0 kJ/molE_{\text{a, forward}} = 60.0\text{ kJ/mol}, Ea, reverse=110.0 kJ/molE_{\text{a, reverse}} = 110.0\text{ kJ/mol}. Steps: Ereactants=Eproducts−ΔH=70.0−(−50.0)=120.0 kJ/molE_{\text{reactants}} = E_{\text{products}} - \Delta H = 70.0 - (-50.0) = 120.0\text{ kJ/mol}. Ea, forward=180.0−120.0=60.0 kJ/molE_{\text{a, forward}} = 180.0 - 120.0 = 60.0\text{ kJ/mol}. Ea, reverse=180.0−70.0=110.0 kJ/molE_{\text{a, reverse}} = 180.0 - 70.0 = 110.0\text{ kJ/mol}.

03

A catalyzed pathway lowers the transition state energy of an endothermic reaction by 30.0 kJ/mol30.0\text{ kJ/mol}. If the uncatalyzed forward and reverse activation energies are 95.0 kJ/mol95.0\text{ kJ/mol} and 55.0 kJ/mol55.0\text{ kJ/mol} respectively, determine ΔH\Delta H and both activation energies for the catalyzed pathway.

Answer

ΔH=+40.0 kJ/mol\Delta H = +40.0\text{ kJ/mol}, Ea, forward, cat=65.0 kJ/molE_{\text{a, forward, cat}} = 65.0\text{ kJ/mol}, Ea, reverse, cat=25.0 kJ/molE_{\text{a, reverse, cat}} = 25.0\text{ kJ/mol}. Steps: A catalyst lowers the transition state energy equally for both directions without altering ΔH\Delta H: ΔH=95.0−55.0=+40.0 kJ/mol\Delta H = 95.0 - 55.0 = +40.0\text{ kJ/mol}. Ea, forward, cat=95.0−30.0=65.0 kJ/molE_{\text{a, forward, cat}} = 95.0 - 30.0 = 65.0\text{ kJ/mol}. Ea, reverse, cat=55.0−30.0=25.0 kJ/molE_{\text{a, reverse, cat}} = 55.0 - 30.0 = 25.0\text{ kJ/mol} (note 65.0−25.0=40.0 kJ/mol65.0 - 25.0 = 40.0\text{ kJ/mol}).

Loading workspace…