Resources

In an organic qualitative analysis laboratory, a student tests three unlabelled bottles (Labeled X, Y, and Z), each containing a pure, liquid unbranched 6-carbon aliphatic hydrocarbon. The student performs two standardized chemical tests: Test 1 involves adding drops of a 0.050 M Br2/CH2Cl20.050\text{ M } \text{Br}_2 / \text{CH}_2\text{Cl}_2 solution in the absence of light; Test 2 involves adding cold, neutral aqueous potassium permanganate (KMnO4\text{KMnO}_4, Baeyer's reagent). Sample X shows no color change in either test. Sample Y rapidly discharges the red-brown color of Br2\text{Br}_2 without evolution of HBr\text{HBr} gas, and turns KMnO4\text{KMnO}_4 from purple to a brown precipitate (MnO2\text{MnO}_2). Quantitative titration of 0.0100 mol0.0100\text{ mol} of Sample Z consumes exactly 0.0200 mol0.0200\text{ mol} of Br2\text{Br}_2 before the reddish color persists. (a) Classify samples X, Y, and Z as an alkane, an alkene, or an alkyne. (b) Write the molecular formula for each sample. (c) Provide the structural feature in Sample Z responsible for the 1:21:2 stoichiometric consumption of Br2\text{Br}_2.

Answer and steps

Final answer

(a) Sample X is an alkane; Sample Y is an alkene; Sample Z is an alkyne; (b) Sample X is C6H14\text{C}_6\text{H}_{14}; Sample Y is C6H12\text{C}_6\text{H}_{12}; Sample Z is C6H10\text{C}_6\text{H}_{10}; (c) The presence of a carbon-carbon triple bond (C≡C\text{C}\equiv\text{C}), which consists of two mutually perpendicular π\pi bonds, allowing two successive electrophilic halogen addition reactions to form a 1,1,2,2-tetrabromoalkane.

Steps

Part (a): Classification of Samples X, Y, and Z

  1. Analyzing Sample X:

    • Bromine test (BrX2 / CHX2ClX2\ce{Br2 / CH2Cl2} in the dark): Alkanes only undergo free-radical halogen substitution in the presence of ultraviolet light or heat; in the dark, they do not react with molecular bromine.
    • Baeyer's test (cold, neutral aqueous KMnOX4\ce{KMnO4}): Saturated hydrocarbons lack electron-rich π\pi bonds and do not reduce permanganate ions.
    • Because Sample X shows no reaction in either test, it is saturated and is therefore classified as an alkane.
  2. Analyzing Sample Y:

    • The rapid decolourization of the reddish-brown bromine solution in the dark without the evolution of acidic HBr\ce{HBr} gas indicates an electrophilic addition across an unsaturated carbon-carbon multiple bond rather than a substitution reaction.
    • The oxidation by cold neutral KMnOX4\ce{KMnO4} to form a brown precipitate of manganese(IV) oxide (MnOX2\ce{MnO2}) and a vicinal diol confirms unsaturation.
    • Because Sample Z is definitively shown by quantitative titration to possess two degrees of unsaturation from a triple bond (see below), Sample Y represents the mono-unsaturated species and is classified as an alkene.
  3. Analyzing Sample Z:

    • The quantitative reaction of 0.0100 mol0.0100\text{ mol} of Sample Z consumes exactly 0.0200 mol0.0200\text{ mol} of BrX2\ce{Br2}: Mole ratio=n(BrX2)n(Sample Z)=0.0200 mol0.0100 mol=2\text{Mole ratio} = \frac{n(\ce{Br2})}{n(\text{Sample Z})} = \frac{0.0200\text{ mol}}{0.0100\text{ mol}} = 2
    • A 1:21:2 stoichiometric ratio of hydrocarbon to halogen demonstrates that two molecules of BrX2\ce{Br2} add to each hydrocarbon molecule. This is characteristic of an alkyne.

Part (b): Molecular Formulae

Each sample is an unbranched, acyclic aliphatic hydrocarbon containing n=6n = 6 carbon atoms:

  • Sample X (alkane): Follows the general formula CnH2n+2\ce{C}_n\ce{H}_{2n+2}. C6H2(6)+2=CX6HX14\ce{C}_6\ce{H}_{2(6)+2} = \ce{C6H14}
  • Sample Y (alkene): Contains one double bond and follows the general formula CnH2n\ce{C}_n\ce{H}_{2n}. C6H2(6)=CX6HX12\ce{C}_6\ce{H}_{2(6)} = \ce{C6H12}
  • Sample Z (alkyne): Contains one triple bond and follows the general formula CnH2n−2\ce{C}_n\ce{H}_{2n-2}. C6H2(6)−2=CX6HX10\ce{C}_6\ce{H}_{2(6)-2} = \ce{C6H10}

Part (c): Structural Feature of Sample Z Responsible for the 1:21:2 Ratio

The stoichiometric consumption of two molar equivalents of BrX2\ce{Br2} per mole of hydrocarbon is due to the presence of a carbon-carbon triple bond (C≡C\ce{C\equiv C}).

  • A carbon-carbon triple bond consists of one strong σ\sigma bond and two mutually perpendicular π\pi bonds.
  • Each π\pi bond has high electron density and undergoes electrophilic addition:
    1. The first π\pi bond reacts with 1 mol1\text{ mol} of BrX2\ce{Br2} to yield a 1,2-dibromoalkene intermediate.
    2. The remaining π\pi bond reacts with a second 1 mol1\text{ mol} of BrX2\ce{Br2} to yield a 1,1,2,2-tetrabromoalkane.
  • Thus, the two reactive π\pi bonds enable the addition of two moles of BrX2\ce{Br2} per mole of alkyne.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the 1:2 hydrocarbon to bromine stoichiometric ratio as meaning each mole of hydrocarbon contains half a mole of bromine-reactive double bonds, classifying Z as an alkene with fewer reactive sites instead of an alkyne with two pi bonds.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    X does not react with Br2\text{Br}_2 or MnO4\text{MnO}_4, so X is an alkane.

  2. Step 2

    Y decolorizes Br2\text{Br}_2 and forms MnO2\text{MnO}_2, so Y is an alkyne. ⟹ Z reacts in a 1:2 ratio with Br2\text{Br}_2, meaning it consumes less reagent per unsaturation, so Z is an alkene.

    Correct

    A 1:21:2 mole ratio of hydrocarbon to Br2\text{Br}_2 (0.0100 mol:0.0200 mol0.0100\text{ mol} : 0.0200\text{ mol}) means each mole of Sample Z adds two moles of Br2\text{Br}_2, which is characteristic of an alkyne ( −C≡C− \,-\text{C}\equiv\text{C}-\,). Therefore, Sample Z is an alkyne and Sample Y is an alkene.

    Consuming two moles of Br2\text{Br}_2 per mole of hydrocarbon means the molecule possesses two reactive π\pi bonds capable of successive electrophilic halogen addition. Thus, Sample Z is the alkyne and Sample Y is the alkene.

  3. Step 3

    X: C6H14\text{C}_6\text{H}_{14} ⟹ Y: C6H10\text{C}_6\text{H}_{10} ⟹ Z: C6H12\text{C}_6\text{H}_{12}

    Correct

    X: C6H14\text{C}_6\text{H}_{14} (alkane, CnH2n+2\text{C}_n\text{H}_{2n+2}) ⟹ Y: C6H12\text{C}_6\text{H}_{12} (alkene, CnH2n\text{C}_n\text{H}_{2n}) ⟹ Z: C6H10\text{C}_6\text{H}_{10} (alkyne, CnH2n−2\text{C}_n\text{H}_{2n-2})

    You applied the correct homologous series formulas to your chosen classifications, but because Y and Z were swapped in part (a), their formulas are swapped here as well.

  4. Step 4

    Sample Z contains one carbon-carbon double bond (C=C\text{C}=\text{C}).

    Correct

    Sample Z contains a carbon-carbon triple bond (C≡C\text{C}\equiv\text{C}), composed of one σ\sigma bond and two mutually perpendicular π\pi bonds.

    Because Sample Z is an alkyne rather than an alkene, the structural feature responsible for adding two equivalents of Br2\text{Br}_2 is a carbon-carbon triple bond containing two π\pi bonds.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified Sample X as an alkane based on its negative reaction with bromine and Baeyer's reagent.

You correctly applied the general molecular formulas CnH2n+2\text{C}_n\text{H}_{2n+2}, CnH2n\text{C}_n\text{H}_{2n}, and CnH2n−2\text{C}_n\text{H}_{2n-2} to 6-carbon chains.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric ratio inversion in electrophilic addition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You interpreted the 1:21:2 hydrocarbon-to-halogen mole ratio as meaning Sample Z consumed less reagent per site of unsaturation, rather than recognizing that one mole of hydrocarbon consumed two moles of halogen because it possesses two reactive π\pi bonds.

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpreting halogen titration ratios
  • An alkene possesses one π\pi bond and adds Br2\text{Br}_2 in a 1:11:1 molar ratio (RCH=CHR′+Br2→RCHBr−CHBrR′\text{RCH}=\text{CHR}' + \text{Br}_2 \rightarrow \text{RCHBr}-\text{CHBrR}'). An alkyne possesses two π\pi bonds and adds Br2\text{Br}_2 in a 1:21:2 molar ratio (RC≡CR′+2Br2→RCBr2−CBr2R′\text{RC}\equiv\text{CR}' + 2\text{Br}_2 \rightarrow \text{RCBr}_2-\text{CBr}_2\text{R}').

  • Always set up the ratio as n(reagent added)n(hydrocarbon)\frac{n(\text{reagent added})}{n(\text{hydrocarbon})}. A value of 22 directly indicates two addition steps across two π\pi bonds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the titration stoichiometry: n(Br2)n(Z)=0.0200 mol0.0100 mol=2\frac{n(\text{Br}_2)}{n(\text{Z})} = \frac{0.0200\text{ mol}}{0.0100\text{ mol}} = 2.

  2. Deduce that Sample Z undergoes two additions of Br2\text{Br}_2, establishing it as an alkyne with a −C≡C−-\text{C}\equiv\text{C}- group.

  3. Classify Sample Y as the alkene since it reacts positively with Br2\text{Br}_2 and KMnO4\text{KMnO}_4 but does not take up two equivalents.

  4. Assign molecular formulas using n=6n = 6: Sample X is C6H14\text{C}_6\text{H}_{14}, Sample Y is C6H12\text{C}_6\text{H}_{12}, and Sample Z is C6H10\text{C}_6\text{H}_{10}.

Final answer

(a) X is an alkane, Y is an alkene, Z is an alkyne; (b) X: C6H14\text{C}_6\text{H}_{14}, Y: C6H12\text{C}_6\text{H}_{12}, Z: C6H10\text{C}_6\text{H}_{10}; (c) A carbon-carbon triple bond (C≡C\text{C}\equiv\text{C}) containing two π\pi bonds.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice calculating mole ratios of halogen consumed per mole of unsaturated reactant.

  • Review how alkenes and alkynes undergo stepwise electrophilic addition reactions with halogens.

OverviewACEpath Teacher's Diagnosis

02 The student applies the general formula of an alkene to an alkyne by confusing the degree of unsaturation of a triple bond with that of a double bond, resulting in an incorrect molecular formula for Z.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    X: alkane, Y: alkene, Z: alkyne

  2. Step 2

    X: CnH2n+2=C6H14\text{C}_n\text{H}_{2n+2} = \text{C}_6\text{H}_{14} ⟹ Y: CnH2n=C6H12\text{C}_n\text{H}_{2n} = \text{C}_6\text{H}_{12} ⟹ Z: CnH2n=C6H12\text{C}_n\text{H}_{2n} = \text{C}_6\text{H}_{12}

    Correct

    X: CnH2n+2=C6H14\text{C}_n\text{H}_{2n+2} = \text{C}_6\text{H}_{14}; Y: CnH2n=C6H12\text{C}_n\text{H}_{2n} = \text{C}_6\text{H}_{12}; Z: CnH2n−2=C6H10\text{C}_n\text{H}_{2n-2} = \text{C}_6\text{H}_{10}

    You used the correct general formulas for the alkane and alkene, but for the alkyne (Sample Z), you reused the alkene formula CnH2n\text{C}_n\text{H}_{2n} instead of CnH2n−2\text{C}_n\text{H}_{2n-2}, yielding C6H12\text{C}_6\text{H}_{12} instead of C6H10\text{C}_6\text{H}_{10}.

  3. Step 3

    A carbon-carbon triple bond (C≡C\text{C}\equiv\text{C}) containing two pi bonds that each add one Br2\text{Br}_2 molecule.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified all three hydrocarbons based on their reaction observations and titration stoichiometry.

You accurately determined the molecular formulas for the alkane and the alkene.

You clearly explained how the two π\pi bonds of the triple bond account for the 1:21:2 molar consumption of bromine.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Alkene formula applied to alkyne

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the degree of unsaturation of an alkyne with a single double bond, incorrectly reusing CnH2n\text{C}_n\text{H}_{2n} instead of subtracting four hydrogen atoms from the saturated parent formula (CnH2n−2\text{C}_n\text{H}_{2n-2}) for the two π\pi bonds.

REASONING PATH
Your ACEpath teacher’s suggested approach
Acyclic Hydrocarbon General Formulas
  • For an acyclic aliphatic hydrocarbon with nn carbons: an alkane has formula CnH2n+2\text{C}_n\text{H}_{2n+2}, a mono-alkene has CnH2n\text{C}_n\text{H}_{2n}, and a mono-alkyne has CnH2n−2\text{C}_n\text{H}_{2n-2}.

  • Each additional π\pi bond removes two hydrogen atoms from the formula; since a triple bond has two π\pi bonds, subtract four hydrogens from 2n+22n+2 to get 2n−22n-2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify Sample Z as an unbranched acyclic alkyne with n=6n = 6 carbons.

  2. Apply the general formula for an acyclic mono-alkyne: CnH2n−2\text{C}_n\text{H}_{2n-2}.

  3. Calculate the number of hydrogen atoms: 2(6)−2=102(6) - 2 = 10.

Final answer

Sample Z is C6H10\text{C}_6\text{H}_{10}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between degrees of unsaturation (index of hydrogen deficiency) and the general formulas of alkanes, alkenes, and alkynes.

  • Practice calculating molecular formulas from carbon counts across various homologous series.

OverviewACEpath Teacher's Diagnosis

03 The student attributes the 1:2 stoichiometry to two separate, isolated carbon-carbon double bonds in a diene rather than recognizing the classification requirement of an alkane, alkene, or alkyne.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    X is an alkane   ⟹  \implies Y is an alkene   ⟹  \implies Z is an alkyne

  2. Step 2

    X: C6H14  ⟹  Y: C6H12  ⟹  Z: C6H10\text{X: } \text{C}_6\text{H}_{14} \implies \text{Y: } \text{C}_6\text{H}_{12} \implies \text{Z: } \text{C}_6\text{H}_{10}

  3. Step 3

    Two separated carbon-carbon double bonds (C=C\text{C}=\text{C}) that each react with one equivalent of Br2\text{Br}_2.

    Correct

    A carbon-carbon triple bond (C≡C\text{C}\equiv\text{C}) containing two mutually perpendicular π\pi bonds, allowing two successive electrophilic additions of Br2\text{Br}_2.

    Because you classified Sample Z as an alkyne, its structural feature is a carbon-carbon triple bond (C≡C\text{C}\equiv\text{C}), not two isolated double bonds (a diene). The triple bond contains one σ\sigma bond and two π\pi bonds, enabling it to add two molar equivalents of Br2\text{Br}_2 to form a 1,1,2,2-tetrabromoalkane.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly matched the chemical test results to the saturated, mono-unsaturated, and di-unsaturated classes of hydrocarbons.

You correctly determined the molecular formulas for 6-carbon unbranched alkane, alkene, and alkyne molecules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing alkyne triple bonds with diene double bonds

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You understood that consuming two molar equivalents of Br2\text{Br}_2 requires two π\pi bonds, but you visualized them as two separate C=C\text{C}=\text{C} double bonds rather than recognizing that a single C≡C\text{C}\equiv\text{C} triple bond in an alkyne already supplies the two π\pi bonds.

REASONING PATH
Your ACEpath teacher’s suggested approach
Bonding in alkynes
  • A carbon-carbon triple bond (C≡C\text{C}\equiv\text{C}) consists of one σ\sigma bond and two mutually perpendicular π\pi bonds.

  • When a compound is classified as an alkyne, attribute multiple halogen additions directly to its single triple bond rather than proposing multiple separate double bonds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that Sample Z is an alkyne, meaning it contains a carbon-carbon triple bond (C≡C\text{C}\equiv\text{C}).

  2. Note that a triple bond possesses two orthogonal π\pi bonds, each capable of undergoing electrophilic addition with one equivalent of Br2\text{Br}_2.

  3. Conclude that addition of the first mole gives a 1,2-dibromoalkene, and addition of the second mole gives a 1,1,2,2-tetrabromoalkane.

Final answer

The structural feature in Sample Z is a carbon-carbon triple bond (C≡C\text{C}\equiv\text{C}) consisting of two reactive π\pi bonds.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the orbital hybridization and bonding framework of alkynes (spsp hybridization, one σ\sigma bond, and two π\pi bonds).

  • Practice writing step-by-step halogen addition mechanisms for alkynes through the dibromoalkene intermediate to the tetrabromoalkane.

Lock it in

Similar question

01

A 0.025 mol0.025\text{ mol} sample of an unbranched 5-carbon hydrocarbon reacts completely with exactly 0.025 mol0.025\text{ mol} of Br2\text{Br}_2 in CH2Cl2\text{CH}_2\text{Cl}_2 without light. Identify the family of this hydrocarbon and state its molecular formula.

Answer

Alkene; C5H10\text{C}_5\text{H}_{10}. The molar ratio n(Br2)n(hydrocarbon)=0.025 mol0.025 mol=1\frac{n(\text{Br}_2)}{n(\text{hydrocarbon})} = \frac{0.025\text{ mol}}{0.025\text{ mol}} = 1, which corresponds to one C=C\text{C}=\text{C} double bond. For an acyclic alkene with n=5n = 5, the formula is C5H2(5)=C5H10\text{C}_5\text{H}_{2(5)} = \text{C}_5\text{H}_{10}.

02

Hydrocarbon A and Hydrocarbon B are both unbranched 4-carbon hydrocarbons. In an analytical titration, 1.08 g1.08\text{ g} of Hydrocarbon A consumes 0.040 mol0.040\text{ mol} of Br2\text{Br}_2, whereas 1.12 g1.12\text{ g} of Hydrocarbon B consumes 0.020 mol0.020\text{ mol} of Br2\text{Br}_2. Identify both hydrocarbons as an alkane, alkene, or alkyne, and write their molecular formulas.

Answer

Hydrocarbon A is an alkyne (C4H6\text{C}_4\text{H}_6); Hydrocarbon B is an alkene (C4H8\text{C}_4\text{H}_8). Key steps: M(C4H6)=54 g/molM(\text{C}_4\text{H}_6) = 54\text{ g/mol}, so 1.08 g=0.020 mol1.08\text{ g} = 0.020\text{ mol}; ratio =0.040 mol0.020 mol=2= \frac{0.040\text{ mol}}{0.020\text{ mol}} = 2 (alkyne). M(C4H8)=56 g/molM(\text{C}_4\text{H}_8) = 56\text{ g/mol}, so 1.12 g=0.020 mol1.12\text{ g} = 0.020\text{ mol}; ratio =0.020 mol0.020 mol=1= \frac{0.020\text{ mol}}{0.020\text{ mol}} = 1 (alkene).

03

An open-chain hydrocarbon with molecular formula C5H8\text{C}_5\text{H}_8 is treated with excess bromine liquid in the absence of light. Write the molecular formula of the fully brominated product and determine the mass of Br2\text{Br}_2 (M=159.8 g/molM = 159.8\text{ g/mol}) consumed by 3.40 g3.40\text{ g} of this hydrocarbon.

Answer

Product formula: C5H8Br4\text{C}_5\text{H}_8\text{Br}_4; Mass of Br2\text{Br}_2 consumed: 16.0 g16.0\text{ g}. Key steps: C5H8\text{C}_5\text{H}_8 fits CnH2n−2\text{C}_n\text{H}_{2n-2}, having two degrees of unsaturation (an alkyne or diene), thus consuming 2 mol Br22\text{ mol } \text{Br}_2 per mole of hydrocarbon. n(hydrocarbon)=3.40 g68.12 g/mol≈0.0499 moln(\text{hydrocarbon}) = \frac{3.40\text{ g}}{68.12\text{ g/mol}} \approx 0.0499\text{ mol}; n(Br2)=2×0.0499=0.0998 moln(\text{Br}_2) = 2 \times 0.0499 = 0.0998\text{ mol}; mass=0.0998 mol×159.8 g/mol≈16.0 g\text{mass} = 0.0998\text{ mol} \times 159.8\text{ g/mol} \approx 16.0\text{ g}.

Loading workspace…