Resources

Consider the thermodynamic definition of electron affinity (EAEA): X(g)+e−→X−(g)X(g) + e^- \rightarrow X^-(g) with ΔHea=−EA\Delta H_{\text{ea}} = -EA. (a) State whether the first electron affinity (EA1EA_1) of fluorine is positive or negative under the convention where energy released corresponds to EA>0EA > 0. (b) Nitrogen has EA1≤0 kJ/molEA_1 \le 0\text{ kJ/mol} while carbon has EA1=+122 kJ/molEA_1 = +122\text{ kJ/mol}. Write the ground-state electron configuration of the gaseous negative ions C−(g)\text{C}^-(g) and N−(g)\text{N}^-(g) and explain the sign difference based on Hund's rule and exchange energy.

Answer and steps

Final answer

(a) Positive (EA1=+328 kJ/molEA_1 = +328\text{ kJ/mol}, corresponding to an exothermic process ΔHea=−328 kJ/mol\Delta H_{\text{ea}} = -328\text{ kJ/mol}); (b) C−=1s22s22p3\text{C}^- = 1s^2 2s^2 2p^3 (adds electron into empty 2pz2p_z orbital, achieving a stable half-filled 2p32p^3 subshell with maximum exchange stabilization); N−=1s22s22p4\text{N}^- = 1s^2 2s^2 2p^4 (requires pairing an electron into an already half-filled 2p32p^3 subshell, where strong inter-electronic pairing repulsion outweighs additional nuclear attraction, resulting in an endothermic/unfavorable process).

Steps

Part (a): Sign of the First Electron Affinity of Fluorine

  1. Thermodynamic Convention: The reaction for the first electron affinity is: F(g)+eX−→FX−(g)\ce{F(g) + e^- -> F^-(g)} Under the stated convention, electron affinity (EAEA) is defined such that ΔHea=−EA\Delta H_{\text{ea}} = -EA. Therefore, an exothermic process (where energy is released and ΔHea<0\Delta H_{\text{ea}} < 0) yields a positive value for EAEA (EA>0EA > 0).
  2. Application to Fluorine: Fluorine has a high effective nuclear charge (ZeffZ_{\text{eff}}) and needs only one electron to complete its valence shell and attain a stable noble gas configuration ([Ne]\ce{[Ne]}). Gaining an electron releases a substantial amount of energy (ΔHea=−328 kJ/mol\Delta H_{\text{ea}} = -328\text{ kJ/mol}). Consequently, under this sign convention: EA1(F)=+328 kJ/mol>0 (Positive)EA_1(\ce{F}) = +328\text{ kJ/mol} > 0\text{ (Positive)}

Part (b): Electron Configurations and Anion Stability of Carbon vs. Nitrogen

  1. Ground-State Electron Configurations:

    • Neutral atoms: C:1s22s22p2\ce{C}: 1s^2 2s^2 2p^2 N:1s22s22p3\ce{N}: 1s^2 2s^2 2p^3
    • Gaseous anions:
      • Adding an electron to carbon populates the remaining vacant 2p2p orbital: CX−:1s22s22p3\ce{C^-}: 1s^2 2s^2 2p^3
      • Adding an electron to nitrogen forces the incoming electron into an already singly occupied 2p2p orbital: NX−:1s22s22p4\ce{N^-}: 1s^2 2s^2 2p^4
  2. Exchange Energy and Hund's Rule Analysis:

    • Exchange stabilization: According to Hund's rule, electrons with parallel spins in degenerate orbitals undergo quantum-mechanical exchange, which lowers the energy of the system. The number of exchange pairs among nn electrons with parallel spins is given by: K=n(n−1)2K = \frac{n(n-1)}{2}
    • For Carbon (C→CX−\ce{C -> C^-}):

      • In neutral C\ce{C} (2p22p^2), there are 22 parallel electrons, yielding K=2(1)2=1K = \frac{2(1)}{2} = 1 exchange interaction.
      • In CX−\ce{C^-} (2p32p^3), there are 33 parallel electrons with each occupying a separate degenerate 2p2p orbital (2px12py12pz12p_x^1 2p_y^1 2p_z^1), giving K=3(2)2=3K = \frac{3(2)}{2} = 3 exchange interactions.
      • The added electron experiences no pairing repulsion (occupies an empty orbital) and gains an extra 22 exchange interactions, creating a particularly stable half-filled 2p32p^3 subshell. Thus, energy is released (EA1=+122 kJ/molEA_1 = +122\text{ kJ/mol}).
    • For Nitrogen (N→NX−\ce{N -> N^-}):

      • Neutral nitrogen already possesses a stable, half-filled 2p32p^3 subshell with maximal exchange energy (33 parallel electrons, K=3K = 3).
      • Forming NX−\ce{N^-} (2p42p^4) forces the incoming electron to pair with an electron already present in one of the 2p2p orbitals. Because the 2p2p orbitals are relatively compact, this introduces significant electron-electron Coulombic repulsion (pairing energy).
      • The destabilizing electron-electron repulsion outweighs the attraction from the nitrogen nucleus and any marginal exchange stabilization, making electron attachment energetically unfavorable/non-spontaneous (ΔHea≥0\Delta H_{\text{ea}} \ge 0, so EA1≤0 kJ/molEA_1 \le 0\text{ kJ/mol}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student confuses the convention where exothermic processes have ΔH < 0 with EA, incorrectly concluding that fluorine has a negative electron affinity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔH is negative because energy is released  ⟹  EA1 of fluorine is negative\Delta H\text{ is negative because energy is released} \implies EA_1\text{ of fluorine is negative}

    Correct

    ΔHea<0  ⟹  EA1>0 (positive)\Delta H_{\text{ea}} < 0 \implies EA_1 > 0\text{ (positive)}

    You correctly recognized that electron gain by fluorine releases energy (exothermic, so ΔHea<0\Delta H_{\text{ea}} < 0). However, the problem explicitly defines ΔHea=−EA\Delta H_{\text{ea}} = -EA, meaning that when energy is released, EAEA is positive (EA>0EA > 0).

  2. Step 2

    C−:1s22s22p3,N−:1s22s22p4\text{C}^-: 1s^2 2s^2 2p^3, \quad \text{N}^-: 1s^2 2s^2 2p^4

  3. Step 3

    Adding an electron to C forms a half-filled 2p3 subshell, increasing parallel spins from 2 to 3 and gaining exchange energy, so EA1>0.  ⟹  Neutral N already has a half-filled 2p3 subshell with maximum exchange stabilization; adding an electron forces pairing and interelectronic repulsion, making EA1≤0.\text{Adding an electron to C forms a half-filled } 2p^3 \text{ subshell, increasing parallel spins from 2 to 3 and gaining exchange energy, so } EA_1 > 0. \implies \text{Neutral N already has a half-filled } 2p^3 \text{ subshell with maximum exchange stabilization; adding an electron forces pairing and interelectronic repulsion, making } EA_1 \le 0.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that adding an electron to gaseous fluorine is an exothermic process where energy is released.

You accurately wrote the ground-state electron configurations for C−\text{C}^- and extN− ext{N}^-.

You clearly articulated how exchange energy and pairing repulsion explain the sign difference between the electron affinities of carbon and nitrogen.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Thermodynamic Sign Convention Confusion

You equated the sign of electron affinity (EAEA) directly with ΔHea\Delta H_{\text{ea}}, overlooking the negative sign in the relationship ΔHea=−EA\Delta H_{\text{ea}} = -EA.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the thermodynamic convention where system heat release is negative (ΔH<0\Delta H < 0) with the atomic physics/chemistry definition of electron affinity where energy released is reported as a positive affinity value (EA>0EA > 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Enthalpy vs. Electron Affinity
  • By convention, ΔHea=−EA\Delta H_{\text{ea}} = -EA. An exothermic process has ΔHea<0\Delta H_{\text{ea}} < 0, which corresponds to EA>0EA > 0.

  • Whenever an electron-gain process releases energy, set ΔHea\Delta H_{\text{ea}} as negative and EAEA as positive under the positive-release convention.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For fluorine, electron attachment is exothermic because energy is released: ΔHea=−328 kJ/mol<0\Delta H_{\text{ea}} = -328\text{ kJ/mol} < 0.

  2. Substitute ΔHea\Delta H_{\text{ea}} into the definition: EA1=−ΔHea=−(−328 kJ/mol)=+328 kJ/mol>0EA_1 = -\Delta H_{\text{ea}} = -(-328\text{ kJ/mol}) = +328\text{ kJ/mol} > 0.

Final answer

(a) Positive (EA1>0EA_1 > 0); (b) C−:1s22s22p3\text{C}^-: 1s^2 2s^2 2p^3, N−:1s22s22p4\text{N}^-: 1s^2 2s^2 2p^4

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between ΔHea\Delta H_{\text{ea}} and EAEA across different chemistry textbooks and exam boards.

  • Practice converting between enthalpy of electron attachment (always ≤0\le 0 for favorable processes) and electron affinity values.

OverviewACEpath Teacher's Diagnosis

02 A student removes electrons instead of adding them when writing the negative ion configurations, leading to the incorrect configurations of cations.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    EA1 of fluorine is positiveEA_1\text{ of fluorine is positive}

  2. Step 2

    C−:1s22s22p1  ⟹  N−:1s22s22p2\text{C}^-: 1s^2 2s^2 2p^1 \implies \text{N}^-: 1s^2 2s^2 2p^2

    Correct

    C−:1s22s22p3  ⟹  N−:1s22s22p4\text{C}^-: 1s^2 2s^2 2p^3 \implies \text{N}^-: 1s^2 2s^2 2p^4

    You removed an electron from neutral carbon (1s22s22p21s^2 2s^2 2p^2) and nitrogen (1s22s22p31s^2 2s^2 2p^3) to produce cation configurations (C+\text{C}^+ and N+\text{N}^+) instead of adding an electron to form the gaseous anions C−\text{C}^- and N−\text{N}^-.

  3. Step 3

    Removing an electron from N leaves 2p2, which loses exchange energy compared to 2p3, so EA1≤0.  ⟹  Removing an electron from C leaves 2p1, so it has less repulsion and EA1=+122 kJ/mol.\text{Removing an electron from N leaves } 2p^2\text{, which loses exchange energy compared to } 2p^3\text{, so } EA_1 \le 0. \implies \text{Removing an electron from C leaves } 2p^1\text{, so it has less repulsion and } EA_1 = +122\text{ kJ/mol}.

    Correct

    Adding an electron to C\text{C} populates the empty 2pz2p_z orbital to yield a stable half-filled 2p32p^3 configuration with maximum exchange stabilization (K=3K = 3), releasing energy (EA1=+122 kJ/molEA_1 = +122\text{ kJ/mol}). Adding an electron to N\text{N} forces pairing into an already singly occupied 2p2p orbital (2p42p^4), introducing strong inter-electronic pairing repulsion that outweighs nuclear attraction, resulting in an unfavorable process (EA1≤0 kJ/molEA_1 \le 0\text{ kJ/mol}).

    Because your configurations were based on removing electrons, your explanation evaluated ionization stability rather than the energetics of gaining an electron.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the first electron affinity of fluorine is positive under the energy-released convention.

You correctly recalled the concept of exchange energy in relation to the stability of the half-filled 2p32p^3 subshell.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Anion Formation with Ionization

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused electron affinity (adding an electron to form an anion X−X^-) with ionization energy (removing an electron to form a cation X+X^+), which caused you to subtract valence electrons instead of adding them.

REASONING PATH
Your ACEpath teacher’s suggested approach
Anion vs. Cation Formation
  • Anions (X−X^-) are formed by adding an electron (X+e−→X−X + e^- \rightarrow X^-), increasing the electron count by 11. Cations (X+X^+) are formed by removing an electron (X→X++e−X \rightarrow X^+ + e^-).

  • Always verify the charge of the target species before writing configurations: negative charge means +1+1 electron; positive charge means −1-1 electron.

Electron Affinity and Subshell Energetics
  • Electron affinity measures the energy change when adding an electron. Half-filled subshells (p3p^3, d5d^5) maximize exchange energy; adding an electron to an already half-filled subshell introduces pairing repulsion.

  • Analyze whether the incoming electron occupies an empty orbital (gaining exchange energy) or pairs with an existing electron (incurring pairing repulsion).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the ground-state electron configurations of neutral C\text{C} (1s22s22p21s^2 2s^2 2p^2) and neutral N\text{N} (1s22s22p31s^2 2s^2 2p^3).

  2. Add one electron to form each anion: C−\text{C}^- becomes 1s22s22p31s^2 2s^2 2p^3 and N−\text{N}^- becomes 1s22s22p41s^2 2s^2 2p^4.

  3. Evaluate Hund's rule: C−\text{C}^- places the extra electron in an empty 2p2p orbital with parallel spin, increasing exchange interactions from 11 to 33 (K=n(n−1)2K = \frac{n(n-1)}{2}) without pairing repulsion, making EA1>0EA_1 > 0.

  4. Evaluate N−\text{N}^-: the extra electron must pair in an already occupied 2p2p orbital, introducing strong inter-electronic repulsion that makes electron attachment unfavorable, so EA1≤0EA_1 \le 0.

Final answer

(a) Positive; (b) C−:1s22s22p3\text{C}^-: 1s^2 2s^2 2p^3, N−:1s22s22p4\text{N}^-: 1s^2 2s^2 2p^4. Adding an electron to C\text{C} creates a stable half-filled 2p32p^3 subshell with increased exchange stabilization (EA1>0EA_1 > 0), whereas adding an electron to N\text{N} introduces substantial electron-electron pairing repulsion into the compact 2p2p subshell (EA1≤0EA_1 \le 0).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definitions of ionization energy versus electron affinity to keep the direction of electron transfer clear.

  • Practice drawing orbital box diagrams before and after electron addition to visualize exchange pairs and pairing repulsion.

OverviewACEpath Teacher's Diagnosis

03 A student incorrectly believes pairing an electron increases exchange energy because it creates a pair, reversing the exchange energy argument.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    EA1 of fluorine is positiveEA_1\text{ of fluorine is positive}

  2. Step 2

    C−:1s22s22p3  ⟹  N−:1s22s22p4\text{C}^-: 1s^2 2s^2 2p^3 \implies \text{N}^-: 1s^2 2s^2 2p^4

  3. Step 3

    For C, forming 2p3 gives 3 unpaired electrons, which cannot exchange, so energy is released only from nuclear attraction.\text{For C, forming } 2p^3 \text{ gives 3 unpaired electrons, which cannot exchange, so energy is released only from nuclear attraction.}

    Correct

    In forming C−\text{C}^- (2p32p^3), the added electron enters an empty degenerate 2p2p orbital with parallel spin. This increases the number of parallel-spin exchange pairs from K=2(1)2=1K = \frac{2(1)}{2} = 1 in neutral C\text{C} (2p22p^2) to K=3(2)2=3K = \frac{3(2)}{2} = 3 in C−\text{C}^-, releasing substantial exchange stabilization energy without any pairing repulsion.

    You stated that unpaired parallel electrons cannot exchange. In quantum mechanics, exchange energy arises specifically between electrons with parallel spins in degenerate orbitals. Moving from 2p22p^2 to 2p32p^3 increases the number of exchange pairs from 11 to 33, providing extra stabilization.

  4. Step 4

    In N−, adding an electron creates a pair, but paired electrons lose exchange energy because exchange only occurs between parallel spins.  ⟹  For N, pairing electrons decreases exchange stabilization, which requires energy and causes EA1≤0.\text{In } \text{N}^-, \text{ adding an electron creates a pair, but paired electrons lose exchange energy because exchange only occurs between parallel spins.} \implies \text{For N, pairing electrons decreases exchange stabilization, which requires energy and causes } EA_1 \le 0.

    Correct

    In neutral N\text{N} (2p32p^3), there are already 33 parallel electrons with maximal exchange stabilization (K=3K = 3). In N−\text{N}^- (2p42p^4), the 33 parallel spin-up electrons still exchange (K=3K = 3), so exchange energy is not lost; rather, forcing an electron into an already occupied 2p2p orbital introduces severe Coulombic pairing repulsion, which outweighs the nuclear attraction and makes EA1≤0EA_1 \le 0.

    You stated that pairing electrons decreases exchange stabilization. The 33 parallel electrons in N−\text{N}^- still retain their 33 exchange interactions. The unfavorable sign of EA1EA_1 for nitrogen is caused by inter-electronic Coulombic pairing repulsion in the compact 2p2p orbital, not by a decrease in exchange energy.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the first electron affinity of fluorine is positive.

You correctly wrote the ground-state electron configurations of C−\text{C}^- and N−\text{N}^-.

You recognized that exchange energy involves electrons with parallel spins.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misconception of Exchange Energy and Pairing Repulsion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that unpaired electrons with parallel spins cannot undergo exchange and that pairing an electron destroys existing parallel exchange interactions, rather than recognizing that exchange stabilization is maximized among parallel spins (K=n(n−1)2K = \frac{n(n-1)}{2}) and that pairing introduces destabilizing Coulombic repulsion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exchange Energy Condition
  • Exchange energy is a stabilizing quantum-mechanical phenomenon that occurs exclusively between electrons with identical (parallel) spins occupying degenerate orbitals, with the number of interactions given by K=n(n−1)2K = \frac{n(n-1)}{2}.

  • Count the number of parallel-spin pairs in degenerate orbitals before and after electron attachment; a higher KK means greater exchange stabilization.

Origin of Anion Destabilization in Nitrogen
  • Adding a fourth electron to a half-filled p3p^3 subshell does not reduce existing parallel-spin exchange interactions; instead, it introduces inter-electron Coulombic pairing energy in a single orbital.

  • Attribute the endothermic nature of electron addition to half-filled subshells to orbital pairing repulsion exceeding effective nuclear attraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that for neutral C\text{C} (2p22p^2), the number of exchange interactions between parallel spins is K=2(1)2=1K = \frac{2(1)}{2} = 1.

  2. Adding an electron into the empty 2pz2p_z orbital produces C−\text{C}^- (2p32p^3), where all 33 electrons have parallel spins, yielding K=3(2)2=3K = \frac{3(2)}{2} = 3 exchange interactions. This gain of 22 exchange interactions provides significant stabilization (EA1=+122 kJ/molEA_1 = +122\text{ kJ/mol}).

  3. For neutral N\text{N} (2p32p^3), the subshell already has maximum exchange stabilization (K=3K = 3).

  4. Adding an electron to form N−\text{N}^- (2p42p^4) preserves those 33 spin-up exchange interactions but forces two electrons to occupy the same compact 2p2p orbital. The resulting Coulombic pairing repulsion exceeds the nuclear attraction, resulting in an unfavorable process (EA1≤0 kJ/molEA_1 \le 0\text{ kJ/mol}).

Final answer

(a) Positive; (b) C−:1s22s22p3\text{C}^-: 1s^2 2s^2 2p^3 achieves a half-filled subshell with maximum exchange stabilization (33 exchange pairs vs. 11 in C\text{C}) and no pairing repulsion, making EA1>0EA_1 > 0; N−:1s22s22p4\text{N}^-: 1s^2 2s^2 2p^4 forces electron pairing into a compact 2p2p orbital, introducing strong Coulombic pairing repulsion that outweighs nuclear attraction, making EA1≤0EA_1 \le 0.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Hund's rule and the formula for exchange pairs K=n(n−1)2K = \frac{n(n-1)}{2} to see how parallel spins lower total electronic energy.

  • Distinguish clearly between exchange energy (stabilizing, between parallel spins) and pairing energy (destabilizing, Coulombic repulsion between opposite spins in the same spatial orbital).

  • Practice explaining periodic anomalies in ionization energy and electron affinity across the second period (e.g., Be vs. B, N vs. O).

Lock it in

Similar question

01

Chlorine has an electron attachment enthalpy of ΔHea=−349 kJ/mol\Delta H_{\text{ea}} = -349\text{ kJ/mol}. Under the convention ΔHea=−EA\Delta H_{\text{ea}} = -EA, state whether EA1(Cl)EA_1(\text{Cl}) is positive or negative, and give its numerical value.

Answer

EA1(Cl)EA_1(\text{Cl}) is positive, with a value of +349 kJ/mol+349\text{ kJ/mol} because EA=−ΔHea=−(−349 kJ/mol)=+349 kJ/molEA = -\Delta H_{\text{ea}} = -(-349\text{ kJ/mol}) = +349\text{ kJ/mol}.

02

Oxygen has EA1=+141 kJ/molEA_1 = +141\text{ kJ/mol} and EA2=−744 kJ/molEA_2 = -744\text{ kJ/mol}. Write the chemical equation for the process corresponding to EA2EA_2 and state whether this second step is exothermic or endothermic.

Answer

Equation: O−(g)+e−→O2−(g)\text{O}^-(g) + e^- \rightarrow \text{O}^{2-}(g). Because EA2=−744 kJ/molEA_2 = -744\text{ kJ/mol}, ΔHea,2=−EA2=+744 kJ/mol>0\Delta H_{\text{ea}, 2} = -EA_2 = +744\text{ kJ/mol} > 0, making the process endothermic due to electron-ion Coulombic repulsion.

03

Phosphorus has EA1=+72 kJ/molEA_1 = +72\text{ kJ/mol} while silicon has EA1=+134 kJ/molEA_1 = +134\text{ kJ/mol}. Using ground-state valence configurations and exchange energy considerations, explain why silicon has a larger positive electron affinity than phosphorus.

Answer

Valence configurations: Si\text{Si} is 3s23p23s^2 3p^2 and forms Si−\text{Si}^- (3s23p33s^2 3p^3), gaining a stable half-filled subshell with an increase from 11 to 33 exchange pairs without pairing repulsion. In contrast, P\text{P} (3s23p33s^2 3p^3) already has maximum exchange stabilization (33 pairs); forming P−\text{P}^- (3s23p43s^2 3p^4) forces electron pairing into a compact 3p3p orbital, introducing inter-electronic repulsion that reduces net energy release.

Loading workspace…