Resources
An unknown Period 3 main-group element reacts vigorously with excess liquid water at to produce an alkaline solution and a flammable diatomic gas. A sample of produces of dry gas collected at and . Given that element reacts via the general equation , determine the molar mass of , identify element , and explain whether its second ionization energy () is expected to be substantially higher or lower than its first ionization energy () based on core vs. valence electron configurations.
Answer and steps
Final answer
Molar mass ; Element is sodium (). Moles of . Moles of . Molar mass , confirming sodium (). Because removal of a second electron disrupts the stable noble-gas core , () is drastically higher (nearly 10 times higher) than ().
Steps
Calculate the moles of hydrogen gas produced
The gas collected is hydrogen (). Assuming ideal gas behavior, use the ideal gas law:
Convert the volume from milliliters to liters:
Substitute the given values using the ideal gas constant :
Determine the moles and molar mass of element
From the balanced chemical equation:
The stoichiometric ratio between and is :
Now calculate the molar mass () of element using its mass ():
Identify element
On the periodic table, the Period 3 main-group element with a molar mass of approximately is sodium (), an alkali metal in Group 1.
Compare the first and second ionization energies
The ground-state electron configuration of neutral sodium is:
- First Ionization Energy (): Removing the first electron removes the single valence electron from the outermost subshell: Because this electron is shielded by the inner core electrons and lies further from the nucleus, is relatively low ().
- Second Ionization Energy (): Removing a second electron requires pulling an electron from the stable, fully filled core shell ( orbital of the neon configuration): Core electrons experience a significantly higher effective nuclear charge () and are much closer to the nucleus.
Consequently, is expected to be substantially higher (nearly an order of magnitude greater) than .
Typical errors
01 The student ignores the 2:1 stoichiometric ratio between X and H₂, assuming a 1:1 mole ratio and obtaining double the correct molar mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
From the balanced equation , two moles of element react for every one mole of produced. You assumed a 1:1 ratio instead of multiplying by 2.
- Step 3Correct
You divided the given mass by your calculated moles correctly, but the result was doubled due to the stoichiometric error in Step 2.
- Step 4Correct
A molar mass of corresponds to sodium (), which is in Period 3. Scandium () is in Period 4 and is a transition metal, not a Period 3 main-group element.
- Step 5Correct
Because element is actually sodium (Group 1), its second electron is removed from the core shell rather than a valence subshell, making drastically higher (nearly an order of magnitude larger) than .
WHAT YOU DID WELL
Compliments from Your TeacherYou converted the volume to liters and correctly applied the ideal gas equation to determine the moles of dry gas.
You used the correct relationship between sample mass and moles to calculate molar mass.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the moles of element directly to the moles of without applying the mole ratio from the balanced chemical equation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking stoichiometric mole ratios when converting between products and reactants in gas stoichiometry problems, which propagated into molar mass calculation and periodic trend analysis.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Balanced Equation Coefficients
In any reaction , the mole conversion is .
Circle the stoichiometric coefficient of the unknown reactant and the measured product before relating their mole quantities.
- Validate Against Periodic Table Constraints
Main-group Period 3 elements run from sodium () to argon ().
Ensure the identified element matches all stated constraints (period, group classification, and typical physical/chemical properties).
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the mole ratio from : .
Calculate the molar mass: .
Identify element : Period 3 alkali metal with molar mass is sodium ().
Evaluate ionization energies: Neutral sodium is . Removing the first electron leaves stable . The second electron must be pulled from the tightly bound noble-gas core, so is substantially higher than .
Molar mass ; Element is sodium (); is substantially higher than because the second ionization removes an electron from the stable core.
02 The student forgets to convert the gas volume from milliliters to liters when using the gas constant in L·atm/(mol·K), resulting in an erroneous mole value and an impossibly small molar mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You substituted directly without converting milliliters to liters (). Because is expressed in , volume must be in liters.
- Step 2Correct
You correctly applied the mole ratio of to , but the calculated value was thrown off by the incorrect mole value from Step 1.
- Step 3Correct
You correctly divided the sample mass by the moles of , but using instead of gave a molar mass that was times too low.
- Step 4Correct
Because the computed molar mass was unphysical, you were unable to identify element as sodium and evaluate its successive ionization energies.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly chose the ideal gas law to relate pressure, volume, and temperature to moles of gas.
You correctly identified and applied the stoichiometric ratio between element and from the balanced equation.
You correctly used the definition of molar mass as sample mass divided by moles of substance.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked that the units of the gas constant dictate the required units of all other variables in . When using , volume must be converted from milliliters to liters before substitution.
REASONING PATH
Your ACEpath teacher’s suggested approach- Match variables to the units of the gas constant
In , when , volume must be in liters (), pressure in atmospheres (), and temperature in kelvins ().
Write down each variable with explicit units and convert by dividing by before plugging numbers into your calculator.
- Assess the physical plausibility of calculated molar masses
No stable chemical element has a molar mass below (hydrogen). A Period 3 element must have a molar mass between () and ().
If a calculated molar mass is off by a factor of , immediately check your gas volume and mass unit conversions.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert volume to liters: .
Calculate moles of hydrogen gas: .
Determine moles of : .
Calculate molar mass of : , identifying as sodium ().
Compare ionization energies: Sodium has valence configuration . The first ionization removes the valence electron, while the second ionization removes a core electron from the stable shell, so is substantially higher than .
Molar mass is ; element is sodium (); is substantially higher than because the second electron is removed from a stable noble-gas core ().
03 The student confuses the trend of successive ionization energies, incorrectly believing that I₂ is lower than I₁ due to increased electron-electron repulsion or stability arguments.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
Successive ionization energies always increase because each subsequent electron is removed from an ion with an increasing net positive charge. Furthermore, neutral sodium has the configuration , so removing the first electron already produces the stable noble-gas configuration . Removing a second electron requires pulling an electron from this tightly bound core shell (), leading to a massive increase in ionization energy ().
WHAT YOU DID WELL
Compliments from Your TeacherYou converted the volume to liters and calculated the moles of gas using the ideal gas law correctly.
You applied the mole ratio between sodium and hydrogen accurately.
You correctly calculated the molar mass and identified sodium from the periodic table.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou reversed the relationship between and , stating that is lower instead of substantially higher.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused which species possesses the noble-gas configuration and overlooked that successive ionization energies must always increase. Neutral sodium () achieves a stable noble-gas configuration when forming , meaning already has a full octet. Removing a second electron disrupts this stable core shell and pulls against a higher effective nuclear charge, causing to spike dramatically.
REASONING PATH
Your ACEpath teacher’s suggested approach- Always Remember: Successive Ionization Energies Increase
holds universally for every element because each electron is removed from an increasingly positive cation.
Never predict that a higher ionization energy () is less than a lower one ().
- Identify Core vs. Valence Shells
A massive jump between successive ionization energies occurs when the electron being removed switches from a valence shell to an inner core shell.
Write out the electron configurations of the neutral atom and each successive cation to identify which removal breaks a stable noble-gas core.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the electron configuration of neutral sodium: .
The first ionization removes the single valence electron: , yielding the stable core configuration .
The second ionization removes an electron from the stable noble-gas core: .
Because core electrons experience much greater effective nuclear charge and reside closer to the nucleus, breaking the noble-gas configuration requires a massive amount of energy.
is substantially higher than .
Lock it in
When given a balanced chemical equation , what is the stoichiometric relationship between moles of and moles of ?
. Always multiply moles of product by the stoichiometric ratio .
Similar question
A sample of a Period 3 alkaline earth metal reacts completely with excess hydrochloric acid according to the equation , generating of dry at and . Determine the molar mass of , identify the element, and state whether the major jump in successive ionization energy occurs at or .
Answer
Moles of . From the ratio, moles of . Molar mass , identifying as magnesium (). Because has two valence electrons (), and remove valence electrons, while removes a core electron; therefore, the huge jump occurs at .
A sample of an unknown main-group metal reacts with excess hot water to produce an insoluble hydroxide and gas via . If of gas is collected, calculate the molar mass of , identify the element, and explain why its fourth ionization energy () is vastly greater than its third ().
Answer
Using the mole ratio, . Molar mass , which is aluminum (). Aluminum has the ground-state configuration . Removing the first three electrons empties the valence shell; removing a fourth electron requires breaking into the stable noble-gas core, causing a massive jump in .
A student measures of an alkali metal from Period 2 or Period 3 and reacts it with excess water: . If of dry is collected at and , calculate the experimental molar mass of , identify the element, and explain whether would be greater for this element or for sodium.
Answer
. . Molar mass , confirming lithium (). Removing the second electron from pulls from a core orbital, whereas for it pulls from a core orbital. Because electrons are closer to the nucleus with less shielding, is significantly higher than .