Resources

The hydrolytic breakdown of a bio-pharmaceutical compound XX is monitored in a 250.0 mL250.0\text{ mL} physiological buffer solution. At t=0.00 ht = 0.00\text{ h}, the solution contains 135.0 mg135.0\text{ mg} of compound XX (molar mass =180.0 g⋅mol−1= 180.0\text{ g}\cdot\text{mol}^{-1}). After an incubation period of 3.50 h3.50\text{ h}, the amount of unreacted compound XX remaining is determined to be 54.0 mg54.0\text{ mg}. Calculate the average rate of disappearance of compound XX over this time interval, expressing your answer in units of μmol⋅L−1⋅min−1\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

Answer and steps

Final answer

8.57 μmol⋅L−1⋅min−18.57\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

Steps

01

Determine the amount of compound XX consumed

The rate of disappearance of a reactant is defined as the change in its concentration over time:

Rate=−Δ[X]Δt=−ΔnXV⋅Δt\text{Rate} = -\frac{\Delta [X]}{\Delta t} = \frac{-\Delta n_X}{V \cdot \Delta t}

First, find the change in mass (Δm\Delta m) of compound XX:

Δm=mfinal−minitial=54.0 mg−135.0 mg=−81.0 mg\Delta m = m_{\text{final}} - m_{\text{initial}} = 54.0\text{ mg} - 135.0\text{ mg} = -81.0\text{ mg}

Thus, the mass of XX consumed is 81.0 mg81.0\text{ mg}. Convert this mass to micromoles (μmol\mu\text{mol}) using its molar mass (M=180.0 g⋅mol−1=180.0 mg⋅mmol−1M = 180.0\text{ g}\cdot\text{mol}^{-1} = 180.0\text{ mg}\cdot\text{mmol}^{-1}):

Moles consumed=81.0 mg180.0 mg⋅mmol−1=0.450 mmol=450 μmol\text{Moles consumed} = \frac{81.0\text{ mg}}{180.0\text{ mg}\cdot\text{mmol}^{-1}} = 0.450\text{ mmol} = 450\text{ }\mu\text{mol}


02

Calculate the change in molar concentration (Δ[X]\Delta [X])

The volume of the buffer solution is V=250.0 mL=0.2500 LV = 250.0\text{ mL} = 0.2500\text{ L}.

Calculate the decrease in concentration of XX:

Δ[X]=−Moles consumedV=−450 μmol0.2500 L=−1800 μmol⋅L−1\Delta [X] = \frac{-\text{Moles consumed}}{V} = \frac{-450\text{ }\mu\text{mol}}{0.2500\text{ L}} = -1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}


03

Convert the time interval to minutes

The incubation period is given in hours, but the required unit is minutes:

Δt=3.50 h×60 min⋅h−1=210 min\Delta t = 3.50\text{ h} \times 60\text{ min}\cdot\text{h}^{-1} = 210\text{ min}


04

Calculate the average rate of disappearance

Apply the definition of the average rate of disappearance:

Rate=−Δ[X]Δt=−−1800 μmol⋅L−1210 min≈8.57 μmol⋅L−1⋅min−1\text{Rate} = -\frac{\Delta [X]}{\Delta t} = -\frac{-1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}}{210\text{ min}} \approx 8.57\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

Common Pitfall: Reaction rates of disappearance are conventionally reported as positive quantities, which is why the negative sign in −Δ[X]Δt-\frac{\Delta [X]}{\Delta t} is necessary when Δ[X]\Delta [X] is negative. Also, ensure consistent unit conversions (converting hours to minutes, milligrams to micromoles, and milliliters to liters) before computing the final rate.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the elapsed time from hours to minutes, calculating the rate per hour instead of per minute.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mass reacted=135.0 mg−54.0 mg=81.0 mg  ⟹  moles reacted=0.0810 g180.0 g/mol=0.000450 mol=450 μmol\text{mass reacted} = 135.0\text{ mg} - 54.0\text{ mg} = 81.0\text{ mg} \implies \text{moles reacted} = \frac{0.0810\text{ g}}{180.0\text{ g/mol}} = 0.000450\text{ mol} = 450\text{ }\mu\text{mol}

  2. Step 2

    Δ[X]=450 μmol0.2500 L=1800 μmol/L\Delta [X] = \frac{450\text{ }\mu\text{mol}}{0.2500\text{ L}} = 1800\text{ }\mu\text{mol/L}

  3. Step 3

    rate=1800 μmol/L3.50 h=514 μmol⋅L−1⋅min−1\text{rate} = \frac{1800\text{ }\mu\text{mol/L}}{3.50\text{ h}} = 514\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

    Correct

    rate=1800 μmol⋅L−13.50 h×60 min⋅h−1=1800 μmol⋅L−1210 min≈8.57 μmol⋅L−1⋅min−1\text{rate} = \frac{1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}}{3.50\text{ h} \times 60\text{ min}\cdot\text{h}^{-1}} = \frac{1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}}{210\text{ min}} \approx 8.57\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

    You divided by 3.50 h3.50\text{ h} instead of converting hours to minutes (3.50 h=210 min3.50\text{ h} = 210\text{ min}), even though your final written unit was in min−1\text{min}^{-1}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the consumed mass of compound XX.

You accurately converted milligrams to micromoles using the molar mass.

You properly converted the volume from milliliters to liters to find the change in molarity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Time Unit Conversion

You substituted time in hours into the denominator while writing the unit as per minute.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked aligning the given time unit (h\text{h}) with the requested rate unit (min−1\text{min}^{-1}) before carrying out the division.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Target Units Before Calculating
  • Always verify that every measured quantity matches the specific units requested in the final answer (e.g., μmol\mu\text{mol}, L\text{L}, and min\text{min}) before computing the quotient.

  • Convert the time interval explicitly first: Δt=3.50 h×60 min⋅h−1=210 min\Delta t = 3.50\text{ h} \times 60\text{ min}\cdot\text{h}^{-1} = 210\text{ min}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the incubation time from hours to minutes: Δt=3.50 h×60 min⋅h−1=210 min\Delta t = 3.50\text{ h} \times 60\text{ min}\cdot\text{h}^{-1} = 210\text{ min}.

  2. Divide the change in concentration by the time in minutes: Rate=1800 μmol⋅L−1210 min≈8.57 μmol⋅L−1⋅min−1\text{Rate} = \frac{1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}}{210\text{ min}} \approx 8.57\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

Final answer

8.57 μmol⋅L−1⋅min−18.57\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out dimensional analysis explicitly with units canceling out in every denominator step.

  • Review whether time is requested in seconds, minutes, or hours before performing final divisions in chemical kinetics problems.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the rate using the remaining amount of compound X instead of the amount that reacted.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    moles remaining=0.0540 g180.0 g/mol=0.000300 mol=300 μmol\text{moles remaining} = \frac{0.0540\text{ g}}{180.0\text{ g/mol}} = 0.000300\text{ mol} = 300\text{ }\mu\text{mol}

    Correct

    Δm=135.0 mg−54.0 mg=81.0 mg  ⟹  Δn=0.0810 g180.0 g⋅mol−1=4.50×10−4 mol=450 μmol\Delta m = 135.0\text{ mg} - 54.0\text{ mg} = 81.0\text{ mg} \implies \Delta n = \frac{0.0810\text{ g}}{180.0\text{ g}\cdot\text{mol}^{-1}} = 4.50 \times 10^{-4}\text{ mol} = 450\text{ }\mu\text{mol}

    Reaction rate depends on the change in amount (Δn=nfinal−ninitialΔn = n_{\text{final}} - n_{\text{initial}}) or the amount consumed. You converted only the final unreacted mass (54.0 mg54.0\text{ mg}) to moles instead of finding the amount of XX that reacted (135.0 mg−54.0 mg=81.0 mg135.0\text{ mg} - 54.0\text{ mg} = 81.0\text{ mg}).

  2. Step 2

    [X]=300 μmol0.2500 L=1200 μmol/L[X] = \frac{300\text{ }\mu\text{mol}}{0.2500\text{ L}} = 1200\text{ }\mu\text{mol/L}

    Correct

    ∣Δ[X]∣=450 μmol0.2500 L=1800 μmol⋅L−1|\Delta [X]| = \frac{450\text{ }\mu\text{mol}}{0.2500\text{ L}} = 1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}

    You correctly converted milliliters to liters and applied the concentration formula C=nVC = \frac{n}{V}, but this step inherited the incorrect quantity from step 1.

  3. Step 3

    Δt=3.50×60 min=210 min\Delta t = 3.50 \times 60\text{ min} = 210\text{ min}

  4. Step 4

    rate=1200 μmol/L210 min=5.71 μmol⋅L−1⋅min−1\text{rate} = \frac{1200\text{ }\mu\text{mol/L}}{210\text{ min}} = 5.71\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

    Correct

    rate=−Δ[X]Δt=1800 μmol⋅L−1210 min≈8.57 μmol⋅L−1⋅min−1\text{rate} = -\frac{\Delta [X]}{\Delta t} = \frac{1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}}{210\text{ min}} \approx 8.57\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

    You correctly divided concentration by elapsed time, but the value was affected by the initial choice of remaining mass instead of consumed mass.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted units of mass, volume, and time correctly.

You correctly used the molar mass to convert grams to moles.

You accurately divided molar quantity by volume to obtain concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Remaining amount used instead of change in amount

You set up the rate using the final unreacted amount of reactant rather than the amount that actually disappeared.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the instantaneous or remaining concentration [A]t[A]_t with the change in concentration over an interval Δ[A]=[A]t−[A]0\Delta [A] = [A]_t - [A]_0. The rate of disappearance measures how much substance is consumed per unit time, not how much substance remains.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Rate as Change Over Time
  • Rate of disappearance=−Δ[A]Δt=[A]initial−[A]finalΔt\text{Rate of disappearance} = -\frac{\Delta [A]}{\Delta t} = \frac{[A]_{\text{initial}} - [A]_{\text{final}}}{\Delta t}

  • Always subtract the final amount from the initial amount to determine how much was consumed before dividing by volume and time.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the mass of XX consumed: Δm=135.0 mg−54.0 mg=81.0 mg\Delta m = 135.0\text{ mg} - 54.0\text{ mg} = 81.0\text{ mg}.

  2. Convert the consumed mass to micromoles: nconsumed=81.0 mg180.0 mg⋅mmol−1=0.450 mmol=450 μmoln_{\text{consumed}} = \frac{81.0\text{ mg}}{180.0\text{ mg}\cdot\text{mmol}^{-1}} = 0.450\text{ mmol} = 450\text{ }\mu\text{mol}.

  3. Calculate the change in molarity: ∣Δ[X]∣=450 μmol0.2500 L=1800 μmol⋅L−1|\Delta [X]| = \frac{450\text{ }\mu\text{mol}}{0.2500\text{ L}} = 1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}.

  4. Divide by the elapsed time in minutes: Rate=1800 μmol⋅L−1210 min≈8.57 μmol⋅L−1⋅min−1\text{Rate} = \frac{1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}}{210\text{ min}} \approx 8.57\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

Final answer

8.57 μmol⋅L−1⋅min−18.57\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before dividing by time, always write down Δ[A]=[A]t−[A]0\Delta [A] = [A]_t - [A]_0 to ensure you are calculating the amount lost rather than the amount left over.

  • Highlight whether the problem specifies an 'amount remaining' or an 'amount consumed' during data extraction.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the rate of change in total amount of substance rather than concentration, omitting the solution volume.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mass reacted\text{mass reacted} = 135.0 mg\text{ mg} - 54.0 mg\text{ mg} = 81.0 mg\text{ mg}   ⟹  \implies amount reacted\text{amount reacted} = 0.0810 g180.0 g/mol\frac{0.0810\text{ g}}{180.0\text{ g/mol}} = 450\text{ }$$\mu$$\text{mol}

  2. Step 2

    Δ\Delta t = 3.50 ×\times 60 min\text{ min} = 210 min\text{ min}

  3. Step 3

    rate\text{rate} = 450 μmol210 min\frac{450\text{ }\mu\text{mol}}{210\text{ min}} = 2.14\text{ }$$\mu$$\text{mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{min}^{-1}$$

    Correct

    rate\text{rate} = -Δ[X]Δt\frac{\Delta [X]}{\Delta t} = 450 μmol0.2500 L×210 min\frac{450\text{ }\mu\text{mol}}{0.2500\text{ L} \times 210\text{ min}} ≈\approx 8.57\text{ }$$\mu$$\text{mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{min}^{-1}$$

    You divided the moles reacted by time alone without dividing by the solution volume (V=250.0 mL=0.2500 LV = 250.0\text{ mL} = 0.2500\text{ L}). Although you wrote L−1\text{L}^{-1} in your final unit, the numerical value represents μmol⋅min−1\mu\text{mol}\cdot\text{min}^{-1}.

WHAT YOU DID WELL
Compliments from Your Teacher

You found the consumed mass of compound XX accurately.

You converted the consumed mass to micromoles using the correct molar mass.

You accurately converted the incubation time into minutes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Solution Volume in Rate Calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the rate of change of molar amount (Δn/Δt\Delta n / \Delta t) with the chemical reaction rate in solution, which is defined as the change in molar concentration over time (−Δ[X]/Δt=−Δn/(V⋅Δt)-\Delta [X] / \Delta t = -\Delta n / (V \cdot \Delta t)).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reaction Rate vs. Amount Rate
  • Rate=−Δ[X]Δt=−ΔnXV⋅Δt\text{Rate} = -\frac{\Delta [X]}{\Delta t} = \frac{-\Delta n_X}{V \cdot \Delta t}

  • Always verify that the numerator represents concentration (amount/V\text{amount} / V) rather than just total amount before dividing by elapsed time.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the buffer volume to liters: V=250.0 mL=0.2500 LV = 250.0\text{ mL} = 0.2500\text{ L}.

  2. Calculate the decrease in concentration: Δ[X]=−450 μmol0.2500 L=−1800 μmol⋅L−1\Delta [X] = -\frac{450\text{ }\mu\text{mol}}{0.2500\text{ L}} = -1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}.

  3. Compute the average rate of disappearance: Rate=−Δ[X]Δt=−−1800 μmol⋅L−1210 min≈8.57 μmol⋅L−1⋅min−1\text{Rate} = -\frac{\Delta [X]}{\Delta t} = -\frac{-1800\text{ }\mu\text{mol}\cdot\text{L}^{-1}}{210\text{ min}} \approx 8.57\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

Final answer

8.57\text{ }$$\mu$$\text{mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{min}^{-1}$$

NEXT STEPS
Final Takeaways from Your Teacher
  • Include volume explicitly in your formula setup: Rate=ΔnV⋅Δt\text{Rate} = \frac{\Delta n}{V \cdot \Delta t}.

  • Check your units at each step to ensure that L−1\text{L}^{-1} comes from an actual division by liters rather than being appended at the end.

Lock it in

Similar question

01

A decomposition reaction occurs in a 500.0 mL500.0\text{ mL} flask. Over an interval of 1.25 h1.25\text{ h}, the amount of reactant decreases by 0.150 mmol0.150\text{ mmol}. Calculate the average rate of disappearance of the reactant in μmol⋅L−1⋅min−1\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

Answer

4.00 μmol⋅L−1⋅min−14.00\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}. Convert moles to micromoles: 0.150 mmol=150 μmol0.150\text{ mmol} = 150\text{ }\mu\text{mol}. Concentration change: Δ[A]=150 μmol0.5000 L=300 μmol⋅L−1\Delta [A] = \frac{150\text{ }\mu\text{mol}}{0.5000\text{ L}} = 300\text{ }\mu\text{mol}\cdot\text{L}^{-1}. Time conversion: Δt=1.25 h×60 min⋅h−1=75.0 min\Delta t = 1.25\text{ h} \times 60\text{ min}\cdot\text{h}^{-1} = 75.0\text{ min}. Average rate: 300 μmol⋅L−175.0 min=4.00 μmol⋅L−1⋅min−1\frac{300\text{ }\mu\text{mol}\cdot\text{L}^{-1}}{75.0\text{ min}} = 4.00\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

02

The concentration of an antibiotic in a 100.0 mL100.0\text{ mL} test tube drops from 2.40×10−3 M2.40\times 10^{-3}\text{ M} to 6.00×10−4 M6.00\times 10^{-4}\text{ M} over a period of 45.0 min45.0\text{ min}. Determine the average rate of degradation in mmol⋅L−1⋅h−1\text{mmol}\cdot\text{L}^{-1}\cdot\text{h}^{-1}.

Answer

2.40 mmol⋅L−1⋅h−12.40\text{ mmol}\cdot\text{L}^{-1}\cdot\text{h}^{-1}. Concentration change: Δ[C]=(2.40−0.60)×10−3 M=1.80×10−3 mol⋅L−1=1.80 mmol⋅L−1\Delta [C] = (2.40 - 0.60)\times 10^{-3}\text{ M} = 1.80\times 10^{-3}\text{ mol}\cdot\text{L}^{-1} = 1.80\text{ mmol}\cdot\text{L}^{-1}. Time conversion: 45.0 min=45.060 h=0.750 h45.0\text{ min} = \frac{45.0}{60}\text{ h} = 0.750\text{ h}. Average rate: 1.80 mmol⋅L−10.750 h=2.40 mmol⋅L−1⋅h−1\frac{1.80\text{ mmol}\cdot\text{L}^{-1}}{0.750\text{ h}} = 2.40\text{ mmol}\cdot\text{L}^{-1}\cdot\text{h}^{-1}.

03

A drug substance YY (M=250.0 g⋅mol−1M = 250.0\text{ g}\cdot\text{mol}^{-1}) degrades in an aqueous solution of volume 2.00 L2.00\text{ L}. Initially, 500.0 mg500.0\text{ mg} of YY is present. After 8.00 h8.00\text{ h}, 125.0 mg125.0\text{ mg} remains. Find the average rate of disappearance of YY in units of μmol⋅L−1⋅s−1\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

Answer

0.0260 μmol⋅L−1⋅s−10.0260\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}. Mass reacted: 500.0 mg−125.0 mg=375.0 mg500.0\text{ mg} - 125.0\text{ mg} = 375.0\text{ mg}. Moles reacted: 375.0 mg250.0 mg/mmol=1.500 mmol=1500 μmol\frac{375.0\text{ mg}}{250.0\text{ mg/mmol}} = 1.500\text{ mmol} = 1500\text{ }\mu\text{mol}. Concentration change: Δ[Y]=1500 μmol2.00 L=750 μmol⋅L−1\Delta [Y] = \frac{1500\text{ }\mu\text{mol}}{2.00\text{ L}} = 750\text{ }\mu\text{mol}\cdot\text{L}^{-1}. Time conversion to seconds: Δt=8.00 h×3600 s⋅h−1=28800 s\Delta t = 8.00\text{ h} \times 3600\text{ s}\cdot\text{h}^{-1} = 28800\text{ s}. Average rate: 750 μmol⋅L−128800 s≈0.0260 μmol⋅L−1⋅s−1\frac{750\text{ }\mu\text{mol}\cdot\text{L}^{-1}}{28800\text{ s}} \approx 0.0260\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

Loading workspace…