Resources

An industrial wastewater stream contains dissolved sulfate ions at a concentration of 480.0 ppm480.0\text{ ppm} (defined as mg of SO42−\text{mg of SO}_4^{2-} per liter of solution, with solution density ρ=1.000 g/mL\rho = 1.000\text{ g/mL}). To remediate the effluent, a chemical technician mixes 250.0 L250.0\text{ L} of this wastewater with excess aqueous barium chloride, inducing the quantitative precipitation reaction: Ba2+(aq)+SO42−(aq)→BaSO4(s)\text{Ba}^{2+}(aq) + \text{SO}_4^{2-}(aq) \rightarrow \text{BaSO}_4(s). Given the standard molar enthalpies of formation ΔHf∘[Ba2+(aq)]=−537.6 kJ/mol\Delta H_f^\circ[\text{Ba}^{2+}(aq)] = -537.6\text{ kJ/mol}, ΔHf∘[SO42−(aq)]=−909.3 kJ/mol\Delta H_f^\circ[\text{SO}_4^{2-}(aq)] = -909.3\text{ kJ/mol}, and ΔHf∘[BaSO4(s)]=−1473.2 kJ/mol\Delta H_f^\circ[\text{BaSO}_4(s)] = -1473.2\text{ kJ/mol}, and the molar mass of sulfate SO42−=96.06 g/mol\text{SO}_4^{2-} = 96.06\text{ g/mol}, calculate the total heat exchanged qq in kilojoules upon complete precipitation.

Answer and steps

Final answer

q=−32.85 kJq = -32.85\text{ kJ} (releasing 32.85 kJ32.85\text{ kJ} of heat)

Steps

01

Find the number of moles of sulfate ions (SOX4X2−\ce{SO4^{2-}})

The concentration of sulfate ions is given as 480.0 ppm480.0\text{ ppm}, defined as milligrams of SOX4X2−\ce{SO4^{2-}} per liter of solution:

Mass concentration=480.0 mg/L=0.4800 g/L\text{Mass concentration} = 480.0\text{ mg/L} = 0.4800\text{ g/L}

Multiply the concentration by the total solution volume to find the total mass of sulfate ions:

m(SOX4X2−)=0.4800 g/L⋅250.0 L=120.0 gm(\ce{SO4^{2-}}) = 0.4800\text{ g/L} \cdot 250.0\text{ L} = 120.0\text{ g}

Convert this mass to moles using the molar mass M=96.06 g/molM = 96.06\text{ g/mol}:

n(SOX4X2−)=120.0 g96.06 g/mol≈1.2492 moln(\ce{SO4^{2-}}) = \frac{120.0\text{ g}}{96.06\text{ g/mol}} \approx 1.2492\text{ mol}

Because barium chloride is in excess, the complete precipitation of sulfate determines the extent of reaction:

nrxn=1.2492 moln_{\text{rxn}} = 1.2492\text{ mol}


02

Calculate the standard molar enthalpy of reaction (ΔHrxn∘\Delta H_{\text{rxn}}^\circ)

The precipitation reaction is:

BaX2+(aq)+SOX4X2−(aq)→BaSOX4(s)\ce{Ba^{2+}(aq) + SO4^{2-}(aq) -> BaSO4(s)}

Using the standard molar enthalpies of formation (ΔHf∘\Delta H_f^\circ):

ΔHrxn∘=∑ΔHf∘(products)−∑ΔHf∘(reactants)\Delta H_{\text{rxn}}^\circ = \sum \Delta H_f^\circ(\text{products}) - \sum \Delta H_f^\circ(\text{reactants})

ΔHrxn∘=ΔHf∘[BaSOX4(s)]−(ΔHf∘[BaX2+(aq)]+ΔHf∘[SOX4X2−(aq)])\Delta H_{\text{rxn}}^\circ = \Delta H_f^\circ[\ce{BaSO4(s)}] - \left(\Delta H_f^\circ[\ce{Ba^{2+}(aq)}] + \Delta H_f^\circ[\ce{SO4^{2-}}(aq)]\right)

Substitute the given numerical values:

ΔHrxn∘=−1473.2 kJ/mol−(−537.6 kJ/mol+(−909.3 kJ/mol))\Delta H_{\text{rxn}}^\circ = -1473.2\text{ kJ/mol} - \left(-537.6\text{ kJ/mol} + (-909.3\text{ kJ/mol})\right)

ΔHrxn∘=−1473.2 kJ/mol−(−1446.9 kJ/mol)=−26.3 kJ/mol\Delta H_{\text{rxn}}^\circ = -1473.2\text{ kJ/mol} - (-1446.9\text{ kJ/mol}) = -26.3\text{ kJ/mol}


03

Calculate the total heat exchanged (qq)

At constant pressure, the heat exchanged qq corresponds to the total enthalpy change:

q=nrxn⋅ΔHrxn∘q = n_{\text{rxn}} \cdot \Delta H_{\text{rxn}}^\circ

q=1.2492 mol⋅(−26.3 kJ/mol)≈−32.85 kJq = 1.2492\text{ mol} \cdot (-26.3\text{ kJ/mol}) \approx -32.85\text{ kJ}

The negative sign signifies that the precipitation process is exothermic, releasing 32.85 kJ32.85\text{ kJ} of thermal energy to the surroundings.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts products from reactants when calculating the enthalpy of reaction, reversing the sign of ΔH° and concluding that the reaction absorbs 32.85 kJ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mass of SO42−=480.0 mg/L×250.0 L=120.0 g  ⟹  n(SO42−)=120.0 g96.06 g/mol=1.2492 mol\text{mass of SO}_4^{2-} = 480.0\text{ mg/L} \times 250.0\text{ L} = 120.0\text{ g} \implies n(\text{SO}_4^{2-}) = \frac{120.0\text{ g}}{96.06\text{ g/mol}} = 1.2492\text{ mol}

  2. Step 2

    ΔHrxn∘=ΔHf∘(reactants)−ΔHf∘(products)  ⟹  ΔHrxn∘=(−537.6+−909.3)−(−1473.2)=+26.3 kJ/mol\Delta H_{\text{rxn}}^\circ = \Delta H_f^\circ(\text{reactants}) - \Delta H_f^\circ(\text{products}) \implies \Delta H_{\text{rxn}}^\circ = (-537.6 + -909.3) - (-1473.2) = +26.3\text{ kJ/mol}

    Correct

    ΔHrxn∘=∑ΔHf∘(products)−∑ΔHf∘(reactants)=−1473.2 kJ/mol−(−537.6 kJ/mol+(−909.3 kJ/mol))=−26.3 kJ/mol\Delta H_{\text{rxn}}^\circ = \sum \Delta H_f^\circ(\text{products}) - \sum \Delta H_f^\circ(\text{reactants}) = -1473.2\text{ kJ/mol} - (-537.6\text{ kJ/mol} + (-909.3\text{ kJ/mol})) = -26.3\text{ kJ/mol}

    Hess's Law with standard enthalpies of formation requires taking the sum of products minus the sum of reactants: ΔHrxn∘=∑ΔHf∘(products)−∑ΔHf∘(reactants)\Delta H_{\text{rxn}}^\circ = \sum \Delta H_f^\circ(\text{products}) - \sum \Delta H_f^\circ(\text{reactants}). Subtracting products from reactants reverses the sign.

  3. Step 3

    q=1.2492 mol×26.3 kJ/mol=+32.85 kJq = 1.2492\text{ mol} \times 26.3\text{ kJ/mol} = +32.85\text{ kJ}

    Correct

    q=n⋅ΔHrxn∘=1.2492 mol×(−26.3 kJ/mol)=−32.85 kJq = n \cdot \Delta H_{\text{rxn}}^\circ = 1.2492\text{ mol} \times (-26.3\text{ kJ/mol}) = -32.85\text{ kJ}

    Your multiplication was mechanically correct, but the sign carried over the error from Step 2. The reaction is exothermic, releasing 32.85 kJ32.85\text{ kJ} (q=−32.85 kJq = -32.85\text{ kJ}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total mass of dissolved sulfate in the effluent.

You accurately converted the mass of sulfate to moles using its molar mass.

You correctly set up the heat exchange formula as q=n⋅ΔHrxn∘q = n \cdot \Delta H_{\text{rxn}}^\circ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Enthalpy of Formation Formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the standard enthalpy of formation formula (∑ΔHf∘(products)−∑ΔHf∘(reactants)\sum \Delta H_f^\circ(\text{products}) - \sum \Delta H_f^\circ(\text{reactants})) with the bond enthalpy formula (∑BE(reactants)−∑BE(products)\sum \text{BE}(\text{reactants}) - \sum \text{BE}(\text{products})). Because enthalpy is a state function defined as final minus initial, formation enthalpies must always be evaluated as products minus reactants.

REASONING PATH
Your ACEpath teacher’s suggested approach
Products Minus Reactants
  • When using standard molar enthalpies of formation: ΔHrxn∘=∑nΔHf∘(products)−∑mΔHf∘(reactants)\Delta H_{\text{rxn}}^\circ = \sum n\Delta H_f^\circ(\text{products}) - \sum m\Delta H_f^\circ(\text{reactants}).

  • Always write the expanded formula with products first before plugging in numerical values.

Sign Check for Precipitation
  • Precipitation reactions typically form stable crystalline ionic lattices from hydrated ions, which is an energetically favorable (exothermic) process with ΔHrxn∘<0\Delta H_{\text{rxn}}^\circ < 0.

  • Verify whether your calculated ΔH\Delta H sign matches the physical nature of the process.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct Hess's Law formula: ΔHrxn∘=ΔHf∘[BaSO4(s)]−(ΔHf∘[Ba2+(aq)]+ΔHf∘[SO42−(aq)])\Delta H_{\text{rxn}}^\circ = \Delta H_f^\circ[\text{BaSO}_4(s)] - (\Delta H_f^\circ[\text{Ba}^{2+}(aq)] + \Delta H_f^\circ[\text{SO}_4^{2-}(aq)])

  2. Substitute the standard enthalpies of formation: ΔHrxn∘=−1473.2−(−537.6+(−909.3))=−26.3 kJ/mol\Delta H_{\text{rxn}}^\circ = -1473.2 - (-537.6 + (-909.3)) = -26.3\text{ kJ/mol}

  3. Multiply by moles of reaction: q=1.2492 mol×(−26.3 kJ/mol)=−32.85 kJq = 1.2492\text{ mol} \times (-26.3\text{ kJ/mol}) = -32.85\text{ kJ}

Final answer

q=−32.85 kJq = -32.85\text{ kJ} (releasing 32.85 kJ32.85\text{ kJ} of heat)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that formation enthalpies always follow 'final minus initial' (products minus reactants).

  • Contrast this with bond energies, which follow 'bonds broken minus bonds formed' (reactants minus products).

  • Double-check that exothermic processes carry a negative value for ΔH\Delta H and qq.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert milligrams to grams when determining the moles of sulfate, resulting in a value that is 1000 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mass of SO42−=480.0 mg/L×250.0 L=120000 mg\text{mass of SO}_4^{2-} = 480.0\text{ mg/L} \times 250.0\text{ L} = 120000\text{ mg}

  2. Step 2

    n(SO42−)=12000096.06=1249.2 moln(\text{SO}_4^{2-}) = \frac{120000}{96.06} = 1249.2\text{ mol}

    Correct

    n(SOX4X2−)=120.0 g96.06 g/mol≈1.2492 moln(\ce{SO4^{2-}}) = \frac{120.0\text{ g}}{96.06\text{ g/mol}} \approx 1.2492\text{ mol}

    Because molar mass is expressed in g/mol\text{g/mol}, the mass must be in grams before dividing. Dividing 120000 mg120000\text{ mg} by 96.06 g/mol96.06\text{ g/mol} yields 1249.2 mmol1249.2\text{ mmol}, or 1.2492 mol1.2492\text{ mol}.

  3. Step 3

    ΔHrxn∘=−1473.2−(−537.6−909.3)=−26.3 kJ/mol\Delta H_{\text{rxn}}^\circ = -1473.2 - (-537.6 - 909.3) = -26.3\text{ kJ/mol}

  4. Step 4

    q=1249.2 mol×(−26.3 kJ/mol)=−32854 kJq = 1249.2\text{ mol} \times (-26.3\text{ kJ/mol}) = -32854\text{ kJ}

    Correct

    q=n⋅ΔHrxn∘=1.2492 mol×(−26.3 kJ/mol)≈−32.85 kJq = n \cdot \Delta H_{\text{rxn}}^\circ = 1.2492\text{ mol} \times (-26.3\text{ kJ/mol}) \approx -32.85\text{ kJ}

    Your formula and multiplication are correct, but your result inherits the factor-of-10001000 discrepancy from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total mass of dissolved sulfate ions from the given concentration and volume.

You correctly applied standard molar enthalpies of formation to determine ΔHrxn∘=−26.3 kJ/mol\Delta H_{\text{rxn}}^\circ = -26.3\text{ kJ/mol}.

You used the correct relationship between heat, moles of reaction, and reaction enthalpy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit mismatch in molar conversion

You forgot to convert milligrams to grams before dividing by the molar mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking dimensional cancellation when applying n=m/Mn = m / M. Since molar mass is tabulated in g/mol\text{g/mol}, a numerator expressed in mg\text{mg} produces millimoles (mmol\text{mmol}) rather than moles (mol\text{mol}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Mass Units with Molar Mass
  • n=mMn = \frac{m}{M} requires mm and MM to share the same mass base unit, typically grams (g\text{g}).

  • Always convert mg\text{mg} to g\text{g} by multiplying by 10−3 g/mg10^{-3}\text{ g/mg} before dividing by a molar mass given in g/mol\text{g/mol}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the mass of sulfate to grams: m=120000 mg×10−3 g/mg=120.0 gm = 120000\text{ mg} \times 10^{-3}\text{ g/mg} = 120.0\text{ g}.

  2. Compute the true moles of sulfate: n=120.0 g96.06 g/mol≈1.2492 moln = \frac{120.0\text{ g}}{96.06\text{ g/mol}} \approx 1.2492\text{ mol}.

  3. Recalculate the heat exchanged: q=1.2492 mol×(−26.3 kJ/mol)≈−32.85 kJq = 1.2492\text{ mol} \times (-26.3\text{ kJ/mol}) \approx -32.85\text{ kJ}.

Final answer

q=−32.85 kJq = -32.85\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include explicit units in every intermediate fraction to confirm that units cancel cleanly.

  • Check whether dividing milligrams by grams per mole was recorded as moles or millimoles.

OverviewACEpath Teacher's Diagnosis

03 The student mismanages the signs of negative enthalpies of formation during subtraction, adding the reactants instead of subtracting them.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mass of SO42−=480.0 mg/L×250.0 L=120.0 g\text{mass of } \text{SO}_4^{2-} = 480.0\text{ mg/L} \times 250.0\text{ L} = 120.0\text{ g}

  2. Step 2

    n(SO42−)=120.0 g/96.06 g/mol=1.2492 moln(\text{SO}_4^{2-}) = 120.0\text{ g} / 96.06\text{ g/mol} = 1.2492\text{ mol}

  3. Step 3

    ΔHrxn∘=−1473.2−537.6−909.3=−2920.1 kJ/mol\Delta H^\circ_{\text{rxn}} = -1473.2 - 537.6 - 909.3 = -2920.1\text{ kJ/mol}

    Correct

    ΔHrxn∘=−1473.2−(−537.6+(−909.3))=−26.3 kJ/mol\Delta H^\circ_{\text{rxn}} = -1473.2 - (-537.6 + (-909.3)) = -26.3\text{ kJ/mol}

    You subtracted the positive numerical values of the reactants' enthalpies instead of subtracting their negative values. The formula is ∑ΔHf∘(products)−∑ΔHf∘(reactants)\sum \Delta H_f^\circ(\text{products}) - \sum \Delta H_f^\circ(\text{reactants}), which requires −1473.2−(−537.6−909.3)=−1473.2+1446.9=−26.3 kJ/mol-1473.2 - (-537.6 - 909.3) = -1473.2 + 1446.9 = -26.3\text{ kJ/mol}.

  4. Step 4

    q=1.2492 mol×(−2920.1 kJ/mol)=−3648 kJq = 1.2492\text{ mol} \times (-2920.1\text{ kJ/mol}) = -3648\text{ kJ}

    Correct

    q=1.2492 mol×(−26.3 kJ/mol)≈−32.85 kJq = 1.2492\text{ mol} \times (-26.3\text{ kJ/mol}) \approx -32.85\text{ kJ}

    You carried your incorrect enthalpy value into the final heat calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the mass of sulfate from its concentration in parts per million.

You converted mass to moles using the molar mass accurately.

You correctly identified that the total heat exchanged is found by multiplying moles reacted by the molar enthalpy of reaction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Hess's Law / Enthalpy of Formation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You dropped the double negative when subtracting negative standard enthalpies of formation, subtracting positive magnitudes rather than subtracting negative values.

REASONING PATH
Your ACEpath teacher’s suggested approach
Apply Enthalpy of Formation Formula
  • ΔHrxn∘=∑npΔHf∘(products)−∑nrΔHf∘(reactants)\Delta H^\circ_{\text{rxn}} = \sum n_p \Delta H_f^\circ(\text{products}) - \sum n_r \Delta H_f^\circ(\text{reactants})

  • Always place parentheses around the reactant sum: ΔHrxn∘=ΔHf∘[product]−(ΔHf∘[reactant1]+ΔHf∘[reactant2])\Delta H^\circ_{\text{rxn}} = \Delta H_f^\circ[\text{product}] - (\Delta H_f^\circ[\text{reactant}_1] + \Delta H_f^\circ[\text{reactant}_2]) before inserting negative values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ΔHrxn∘=−1473.2 kJ/mol−[(−537.6 kJ/mol)+(−909.3 kJ/mol)]=−1473.2−(−1446.9)=−26.3 kJ/mol\Delta H^\circ_{\text{rxn}} = -1473.2\text{ kJ/mol} - [(-537.6\text{ kJ/mol}) + (-909.3\text{ kJ/mol})] = -1473.2 - (-1446.9) = -26.3\text{ kJ/mol}

  2. q=n⋅ΔHrxn∘=1.2492 mol×(−26.3 kJ/mol)=−32.85 kJq = n \cdot \Delta H^\circ_{\text{rxn}} = 1.2492\text{ mol} \times (-26.3\text{ kJ/mol}) = -32.85\text{ kJ}

Final answer

q=−32.85 kJq = -32.85\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write explicit grouping parentheses around all reactant formation enthalpies before substituting values.

  • Review subtracting negative numbers: subtracting a negative quantity is equivalent to adding its absolute value.

Lock it in

Similar question

01

Calculate ΔHrxn∘\Delta H_{\text{rxn}}^\circ for the neutralization reaction H+(aq)+OH−(aq)→H2O(l)\text{H}^+(aq) + \text{OH}^-(aq) \rightarrow \text{H}_2\text{O}(l) given ΔHf∘[H+(aq)]=0 kJ/mol\Delta H_f^\circ[\text{H}^+(aq)] = 0\text{ kJ/mol}, ΔHf∘[OH−(aq)]=−230.0 kJ/mol\Delta H_f^\circ[\text{OH}^-(aq)] = -230.0\text{ kJ/mol}, and Δ\Delta H_f^∘\circ[H\text{H}2O\text{O}(l)] = -285.8 kJ/mol\text{ kJ/mol}$.

Answer

ΔHrxn∘=−55.8 kJ/mol\Delta H_{\text{rxn}}^\circ = -55.8\text{ kJ/mol}. Using ΔHrxn∘=∑ΔHf∘(products)−∑ΔHf∘(reactants)=−285.8−(0+(−230.0))=−55.8 kJ/mol\Delta H_{\text{rxn}}^\circ = \sum \Delta H_f^\circ(\text{products}) - \sum \Delta H_f^\circ(\text{reactants}) = -285.8 - (0 + (-230.0)) = -55.8\text{ kJ/mol}.

02

A solution containing 0.0500 mol0.0500\text{ mol} of Ag+(aq)\text{Ag}^+(aq) is mixed with excess Cl−(aq)\text{Cl}^-(aq) to precipitate AgCl(s)\text{AgCl}(s). Given ΔHf∘[Ag+(aq)]=+105.6 kJ/mol\Delta H_f^\circ[\text{Ag}^+(aq)] = +105.6\text{ kJ/mol}, ΔHf∘[Cl−(aq)]=−167.2 kJ/mol\Delta H_f^\circ[\text{Cl}^-(aq)] = -167.2\text{ kJ/mol}, and ΔHf∘[AgCl(s)]=−127.0 kJ/mol\Delta H_f^\circ[\text{AgCl}(s)] = -127.0\text{ kJ/mol}, calculate the heat exchanged qq in kilojoules.

Answer

q=−3.27 kJq = -3.27\text{ kJ}. First, ΔHrxn∘=ΔHf∘[AgCl(s)]−(ΔHf∘[Ag+]+ΔHf∘[Cl−])=−127.0−(105.6−167.2)=−65.4 kJ/mol\Delta H_{\text{rxn}}^\circ = \Delta H_f^\circ[\text{AgCl}(s)] - (\Delta H_f^\circ[\text{Ag}^+] + \Delta H_f^\circ[\text{Cl}^-]) = -127.0 - (105.6 - 167.2) = -65.4\text{ kJ/mol}. Then, q=n⋅ΔHrxn∘=0.0500 mol×(−65.4 kJ/mol)=−3.27 kJq = n \cdot \Delta H_{\text{rxn}}^\circ = 0.0500\text{ mol} \times (-65.4\text{ kJ/mol}) = -3.27\text{ kJ}.

03

An industrial stream of 500.0 L500.0\text{ L} with 320.0 ppm320.0\text{ ppm} of Ca2+\text{Ca}^{2+} (M=40.08 g/molM = 40.08\text{ g/mol}) is treated with excess carbonate to precipitate CaCO3(s)\text{CaCO}_3(s). Given ΔHf∘[Ca2+(aq)]=−542.8 kJ/mol\Delta H_f^\circ[\text{Ca}^{2+}(aq)] = -542.8\text{ kJ/mol}, ΔHf∘[CO32−(aq)]=−677.1 kJ/mol\Delta H_f^\circ[\text{CO}_3^{2-}(aq)] = -677.1\text{ kJ/mol}, and ΔHf∘[CaCO3(s)]=−1207.6 kJ/mol\Delta H_f^\circ[\text{CaCO}_3(s)] = -1207.6\text{ kJ/mol}, determine the total heat exchanged qq in kilojoules.

Answer

q=+4.91 kJq = +4.91\text{ kJ} (endothermic, absorbs 4.91 kJ4.91\text{ kJ}). Moles of Ca2+=0.3200 g/L×500.0 L40.08 g/mol=3.992 mol\text{Ca}^{2+} = \frac{0.3200\text{ g/L} \times 500.0\text{ L}}{40.08\text{ g/mol}} = 3.992\text{ mol}. ΔHrxn∘=−1207.6−(−542.8+(−677.1))=−1207.6−(−1219.9)=+12.3 kJ/mol\Delta H_{\text{rxn}}^\circ = -1207.6 - (-542.8 + (-677.1)) = -1207.6 - (-1219.9) = +12.3\text{ kJ/mol}. Total heat q=3.992 mol×(+12.3 kJ/mol)=+4.91 kJq = 3.992\text{ mol} \times (+12.3\text{ kJ/mol}) = +4.91\text{ kJ}.

Loading workspace…