Resources

A student learning quantum mechanics hypothesizes: 'Because energy levels in an atom converge at higher principal quantum numbers (n→∞n \to \infty), heating a metal salt to twice its flame temperature will shift its emission spectral lines to shorter, more energetic wavelengths (blue-shifting the discrete atomic lines).' (a) Critically evaluate this hypothesis and explain why atomic emission lines do NOT change their characteristic wavelengths when temperature increases. (b) Explain what property of the spectral lines does change when temperature increases from T1=1800 KT_1 = 1800\text{ K} to T2=2500 KT_2 = 2500\text{ K}. (c) Using the Boltzmann distribution ratio N2N1=g2g1e−ΔEkBT\frac{N_2}{N_1} = \frac{g_2}{g_1} e^{-\frac{\Delta E}{k_B T}}, calculate the relative increase in the excited-state population fraction for the sodium 3p3p state (ΔE=3.37×10−19 J\Delta E = 3.37 \times 10^{-19}\text{ J}, with statistical degeneracy ratio g2g1=3\frac{g_2}{g_1} = 3) between T1=1800 KT_1 = 1800\text{ K} and T2=2500 KT_2 = 2500\text{ K} (kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}).

Answer and steps

Final answer

(a) The hypothesis is fundamentally incorrect: the wavelengths of discrete atomic emission lines are fixed quantum properties determined solely by the invariant energy difference ΔE=Eupper−Elower\Delta E = E_{\text{upper}} - E_{\text{lower}} between quantized electronic eigenstates (E=hcλE = \frac{hc}{\lambda}); (b) Higher temperature increases the thermal population of the excited state (increasing line intensity) and causes minor thermal Doppler broadening, but does not shift the central transition wavelength; (c) At T1=1800 KT_1 = 1800\text{ K}, N2N1=3.65×10−6\frac{N_2}{N_1} = 3.65 \times 10^{-6}; at T2=2500 KT_2 = 2500\text{ K}, N2N1=1.70×10−4\frac{N_2}{N_1} = 1.70 \times 10^{-4} (an increase by a factor of approximately 46.646.6).

Steps

01

At T1=1800 KT_1 = 1800\text{ K}:

Part (a): Evaluation of the Student's Hypothesis

The student's hypothesis confuses continuous blackbody radiation with discrete atomic emission:

  1. Quantization of Atomic Energy Levels:
    In an isolated atom, electrons occupy discrete, quantized energy levels (EnE_n). The wavelength (λ\lambda) of an emitted photon during a transition from an upper state (EupperE_{\text{upper}}) to a lower state (ElowerE_{\text{lower}}) is given strictly by the Planck–Einstein relation: ΔE=Eupper−Elower=hcλ  ⟹  λ=hcΔE\Delta E = E_{\text{upper}} - E_{\text{lower}} = \frac{hc}{\lambda} \implies \lambda = \frac{hc}{\Delta E} Because the energy difference ΔE\Delta E is an invariant characteristic of the atom's nuclear charge and electronic structure, the central wavelength of any given transition line is fixed.
  2. Why Temperature Does Not Shift Transition Lines:
    Increasing the flame temperature raises the average kinetic energy of the surrounding gas and increases the frequency and energy of collisional excitations. However, it does not alter the stationary energy eigenvalues of the atom. While higher temperatures can populate higher energy levels (leading to the appearance of additional lines from different transitions), each individual spectral line remains centered at its characteristic wavelength. Therefore, atomic lines do not "blue-shift" to shorter wavelengths simply because the temperature increases.

Part (b): Properties That Change with Temperature

When the temperature increases from T1=1800 KT_1 = 1800\text{ K} to T2=2500 KT_2 = 2500\text{ K}, two properties of the spectral emission line change:

  1. Emission Intensity (Primary Change):
    According to the Maxwell–Boltzmann distribution, the proportion of atoms in the excited state increases drastically at higher temperatures. Because emission intensity is directly proportional to the population of the excited state (I∝N2I \propto N_2), the spectral line becomes much brighter (more intense).
  2. Line Broadening (Secondary Change):
    • Doppler Broadening: Atoms possess higher thermal velocities (vth∝Tv_{\text{th}} \propto \sqrt{T}), causing a slightly wider distribution of Doppler-shifted frequencies, which slightly broadens the line width (ΔλD∝T\Delta \lambda_D \propto \sqrt{T}).
    • Collisional (Pressure) Broadening: Higher collision frequencies slightly shorten the lifetime of the excited state, causing minor broadening via the uncertainty principle. (Note: Neither broadening mechanism changes the central emission wavelength of the transition.)

Part (c): Boltzmann Population Calculation

The ratio of the population in the excited state (N2N_2) to the ground state (N1N_1) is given by the Boltzmann distribution: N2N1=g2g1e−ΔEkBT\frac{N_2}{N_1} = \frac{g_2}{g_1} e^{-\frac{\Delta E}{k_B T}} Given:

  • ΔE=3.37×10−19 J\Delta E = 3.37 \times 10^{-19}\text{ J}
  • g2g1=3\frac{g_2}{g_1} = 3
  • kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}

ΔEkBT1=3.37×10−19 J(1.381×10−23 J/K)(1800 K)≈13.56\frac{\Delta E}{k_B T_1} = \frac{3.37 \times 10^{-19}\text{ J}}{(1.381 \times 10^{-23}\text{ J/K})(1800\text{ K})} \approx 13.56

(N2N1)1=3⋅e−13.56≈3.65×10−6\left(\frac{N_2}{N_1}\right)_1 = 3 \cdot e^{-13.56} \approx 3.65 \times 10^{-6}

02

At T2=2500 KT_2 = 2500\text{ K}:

ΔEkBT2=3.37×10−19 J(1.381×10−23 J/K)(2500 K)≈9.76\frac{\Delta E}{k_B T_2} = \frac{3.37 \times 10^{-19}\text{ J}}{(1.381 \times 10^{-23}\text{ J/K})(2500\text{ K})} \approx 9.76

(N2N1)2=3⋅e−9.76≈1.70×10−4\left(\frac{N_2}{N_1}\right)_2 = 3 \cdot e^{-9.76} \approx 1.70 \times 10^{-4}

03

Relative Increase (Factor of Increase):

Factor=(N2N1)2(N2N1)1=1.70×10−43.65×10−6≈46.6\text{Factor} = \frac{\left(\frac{N_2}{N_1}\right)_2}{\left(\frac{N_2}{N_1}\right)_1} = \frac{1.70 \times 10^{-4}}{3.65 \times 10^{-6}} \approx 46.6

The excited-state population increases by a factor of approximately 46.646.6, explaining the marked increase in flame test emission intensity at higher temperatures.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses atomic line emission with blackbody radiation or Wien's displacement law, incorrectly concluding that higher temperature increases photon energy and shifts line wavelengths.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The hypothesis is correct because Wien's law states λmax⁡⋅T=constant\lambda_{\max} \cdot T = \text{constant}, so higher temperature shifts emission to shorter wavelengths. As thermal energy increases, atoms absorb more kinetic energy and emit higher-energy, blue-shifted photons.

    Correct

    The hypothesis is incorrect. Atomic emission lines arise from transitions between discrete, quantized electronic energy levels where ΔE=Eupper−Elower=hcλ\Delta E = E_{\text{upper}} - E_{\text{lower}} = \frac{hc}{\lambda}. Because these energy eigenvalues are invariant atomic properties, temperature cannot shift the characteristic transition wavelengths.

    You conflated continuous blackbody radiation (which follows Wien's displacement law) with discrete atomic line emission. In isolated gas-phase atoms, photon emission occurs between fixed quantum states; thermal energy increases collision rates and excitation populations, but does not alter the energy gap ΔE\Delta E of the stationary states.

  2. Step 2

    The central wavelength shifts to a shorter wavelength (blue shift), and the intensity of the line also increases.

    Correct

    The central wavelength remains unchanged. The primary change is an increase in line intensity (due to greater excited-state population), accompanied by slight Doppler and collisional line broadening.

    You correctly noted that the intensity increases, but the central wavelength does not blue-shift. Raising the temperature increases the thermal population of the excited state and causes slight symmetric thermal Doppler broadening, but the central emission wavelength remains constant.

  3. Step 3

    ΔEkB=3.37×10−191.381×10−23=24403 K  ⟹  Ratio at 1800 K:N2/N1=3×exp⁡(−24403/1800)=3.89×10−6  ⟹  Ratio at 2500 K:N2/N1=3×exp⁡(−24403/2500)=1.73×10−4  ⟹  Relative increase=1.73×10−43.89×10−6=44.5 times\frac{\Delta E}{k_B} = \frac{3.37 \times 10^{-19}}{1.381 \times 10^{-23}} = 24403\text{ K} \implies \text{Ratio at } 1800\text{ K}: N_2/N_1 = 3 \times \exp(-24403/1800) = 3.89 \times 10^{-6} \implies \text{Ratio at } 2500\text{ K}: N_2/N_1 = 3 \times \exp(-24403/2500) = 1.73 \times 10^{-4} \implies \text{Relative increase} = \frac{1.73 \times 10^{-4}}{3.89 \times 10^{-6}} = 44.5\text{ times}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the Boltzmann factor equation including the degeneracy ratio.

You performed the multi-step exponential evaluation and ratio calculation with high numerical precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Concept Confusion: Blackbody Radiation vs. Quantized Atomic Emission

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated discrete atomic line emission as continuous thermal blackbody radiation, assuming Wien's displacement law applies to individual electronic transitions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Discrete vs. Continuous Radiation
  • Wien's displacement law applies exclusively to continuous blackbody thermal spectra, whereas discrete atomic line spectra are fixed by quantized electronic energy gaps: λ=hcΔE\lambda = \frac{hc}{\Delta E}.

  • Check whether the emitter consists of isolated gas-phase atoms (discrete line spectrum) or a dense macroscopic body in thermal equilibrium (continuous blackbody spectrum) before applying thermal radiation laws.

Effect of Temperature on Atomic Transitions
  • Temperature governs the statistical population of states (Ni∝gie−Ei/kBTN_i \propto g_i e^{-E_i / k_B T}) and thermal motion (Doppler width), not the stationary eigenvalues (EnE_n) of an atom.

  • Associate higher temperature with increased line brightness and slight line broadening, never with a shift in the transition's central wavelength.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State clearly that the hypothesis is incorrect: atomic energy levels EnE_n are quantized stationary states determined by atomic structure.

  2. Relate the photon wavelength directly to the invariant quantum transition energy: λ0=hcE2−E1\lambda_0 = \frac{hc}{E_2 - E_1}.

  3. For part (b), identify that temperature affects state occupancy (line intensity ∝N2\propto N_2) and thermal velocity dispersion (Doppler line broadening ΔλD∝T\Delta \lambda_D \propto \sqrt{T}), while keeping the central peak λ0\lambda_0 fixed.

Final answer

(a) The hypothesis is incorrect because discrete spectral line wavelengths are fixed by quantized energy gaps (λ=hcΔE\lambda = \frac{hc}{\Delta E}) and do not depend on temperature; (b) Higher temperature increases the line intensity and broadens the line width, but does not alter its central wavelength; (c) The excited-state population increases by a factor of approximately 45–4745\text{--}47.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental distinction between blackbody thermal emitters and isolated atomic gas emitters.

  • Practice identifying how external thermodynamic variables (temperature, pressure) alter line intensity and line shape without shifting atomic energy eigenvalues.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the temperature ratio in the Boltzmann factor exponential, evaluating exp(-ΔE/(kB*T1) + ΔE/(kB*T2)) rather than the increase from T1 to T2, yielding a fraction far less than 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The hypothesis is false because emission wavelengths are determined by fixed differences between discrete quantized levels, ΔE=hcλ\Delta E = \frac{hc}{\lambda}.   ⟹  \implies Temperature alters thermal excitation rates, not the atomic energy levels.

  2. Step 2

    The intensity of the spectral emission lines increases, and thermal Doppler broadening increases.

  3. Step 3

    ΔEkB=3.37×10−19 J1.381×10−23 J/K=24403 K\frac{\Delta E}{k_B} = \frac{3.37 \times 10^{-19}\text{ J}}{1.381 \times 10^{-23}\text{ J/K}} = 24403\text{ K}

  4. Step 4

    Relative increase\text{Relative increase} = \exp(−ΔEkB⋅(1T1−1T2))\left(-\frac{\Delta E}{k_B} \cdot \left(\frac{1}{T_1} - \frac{1}{T_2}\right)\right) = \exp(-24403 ⋅\cdot (1/1800 - 1/2500))   ⟹  \implies 11800\frac{1}{1800} - 12500\frac{1}{2500} = 1.556 ×\times 10^{-4} K\text{ K}^{-1}   ⟹  \implies Exponent\text{Exponent} = -24403 ×\times 1.556 ×\times 10^{-4} = -3.797   ⟹  \implies Relative increase\text{Relative increase} = \exp(-3.797) = 0.0225

    Correct

    Relative increase\text{Relative increase} = (N2/N1)T2(N2/N1)T1\frac{(N_2/N_1)_{T_2}}{(N_2/N_1)_{T_1}} = e−ΔE/(kBT2)e−ΔE/(kBT1)\frac{e^{-\Delta E / (k_B T_2)}}{e^{-\Delta E / (k_B T_1)}} = \exp[−ΔEkB(1T2−1T1)]\left[-\frac{\Delta E}{k_B}\left(\frac{1}{T_2} - \frac{1}{T_1}\right)\right] = \exp[ΔEkB(1T1−1T2)]\left[\frac{\Delta E}{k_B}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)\right] = \exp(3.80) ≈\approx 44.6  to \text{ to } 46.6

    You kept the leading negative sign while subtracting 1T2\frac{1}{T_2} from 1T1\frac{1}{T_1}. Because T2>T1T_2 > T_1, 1T1−1T2>0\frac{1}{T_1} - \frac{1}{T_2} > 0, so retaining the negative sign produced a negative exponent and a value <1< 1. Higher temperatures must increase the excited-state population, so the ratio Population(T2)Population(T1)\frac{\text{Population}(T_2)}{\text{Population}(T_1)} must be greater than 11.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly refuted the student's hypothesis using quantum mechanical principles.

You accurately identified both line intensity and Doppler broadening as temperature-dependent properties.

You correctly computed the quotient ΔEkB=24403 K\frac{\Delta E}{k_B} = 24403\text{ K}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign inversion in exponential ratio

You combined an outer negative sign with an already-inverted reciprocal difference (1T1−1T2)\left(\frac{1}{T_1} - \frac{1}{T_2}\right), yielding −3.797-3.797 rather than +3.797+3.797.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating quotient exponent subtraction e−A/T2e−A/T1=e−A/T2−(−A/T1)=eA(1/T1−1/T2)\frac{e^{-A/T_2}}{e^{-A/T_1}} = e^{-A/T_2 - (-A/T_1)} = e^{A(1/T_1 - 1/T_2)} with the single-state Boltzmann factor formula, leading to a double-negative error that predicted a decrease rather than an increase.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality Check for Thermal Population
  • Thermal excitation probability always increases with temperature (T2>T1  ⟹  N2(T2)>N2(T1)T_2 > T_1 \implies N_2(T_2) > N_2(T_1)).

  • Whenever calculating an increase factor between T1T_1 and T2T_2 (T2>T1T_2 > T_1), verify that your final factor is strictly greater than 11.

Exponent Subtraction Rule
  • e−ae−b=e−a−(−b)=eb−a=e−(a−b)\frac{e^{-a}}{e^{-b}} = e^{-a - (-b)} = e^{b - a} = e^{-(a - b)}.

  • Write out numerator and denominator terms separately before factoring out constants to avoid sign errors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Form the ratio of populations: (N2/N1)T2(N2/N1)T1=e−ΔE/(kBT2)e−ΔE/(kBT1)=exp⁡[−ΔEkB(1T2−1T1)]\frac{(N_2/N_1)_{T_2}}{(N_2/N_1)_{T_1}} = \frac{e^{-\Delta E/(k_B T_2)}}{e^{-\Delta E/(k_B T_1)}} = \exp\left[-\frac{\Delta E}{k_B}\left(\frac{1}{T_2} - \frac{1}{T_1}\right)\right]

  2. Simplify the exponent: −ΔEkB(1T2−1T1)=ΔEkB(1T1−1T2)=24403 K×(11800 K−12500 K)=+3.797-\frac{\Delta E}{k_B}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) = \frac{\Delta E}{k_B}\left(\frac{1}{T_1} - \frac{1}{T_2}\right) = 24403\text{ K} \times \left(\frac{1}{1800\text{ K}} - \frac{1}{2500\text{ K}}\right) = +3.797

  3. Evaluate the exponential: exp⁡(+3.797)≈44.6\exp(+3.797) \approx 44.6 (or 46.646.6 without intermediate rounding)

Final answer

The excited-state population fraction increases by a factor of approximately 44.644.6 (or 46.646.6).

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a physical sanity check on temperature ratios: heating must yield a factor >1> 1 for excited states.

  • Practice expanding exponential quotients step by step to prevent sign confusion when handling negative terms.

Lock it in

Similar question

01

A Bunsen burner flame containing vaporized potassium emits characteristic violet light at λ=766.5 nm\lambda = 766.5\text{ nm}. If the gas flow is adjusted to increase the flame temperature from 1900 K1900\text{ K} to 2200 K2200\text{ K}, what is the new central wavelength of this specific transition?

Answer

The central wavelength remains exactly 766.5 nm766.5\text{ nm}. The stationary electronic energy gap ΔE=E4p−E4s\Delta E = E_{4p} - E_{4s} is an invariant quantum property of the potassium atom; higher temperature only increases the brightness and slightly broadens the line.

02

An astronomer observes hydrogen emission (HαH_\alpha, λ0=656.3 nm\lambda_0 = 656.3\text{ nm}) from two planetary nebulae: Gas Cloud A at T=8,000 KT = 8{,}000\text{ K} and Gas Cloud B at T=15,000 KT = 15{,}000\text{ K}. Assuming neither cloud has bulk radial velocity, compare their central peak wavelengths and line profiles.

Answer

Both nebulae have their HαH_\alpha line centered at the exact same wavelength, λ0=656.3 nm\lambda_0 = 656.3\text{ nm}. However, Gas Cloud B exhibits greater thermal Doppler broadening (line width ΔλD∝T\Delta \lambda_D \propto \sqrt{T}, so broader by a factor of 15000/8000≈1.37\sqrt{15000/8000} \approx 1.37) and greater transition brightness per unit mass.

03

The resonance transition of cesium occurs at ΔE=2.30×10−19 J\Delta E = 2.30 \times 10^{-19}\text{ J} with degeneracy ratio g2/g1=2g_2/g_1 = 2. Calculate the ratio of excited-state populations between T2=2400 KT_2 = 2400\text{ K} and T1=1600 KT_1 = 1600\text{ K} using the Boltzmann distribution (kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}). Does this population increase shift the emitted photon energy?

Answer

(N2/N1)2(N2/N1)1=exp⁡[−ΔEkB(1T2−1T1)]\frac{(N_2/N_1)_2}{(N_2/N_1)_1} = \exp\left[-\frac{\Delta E}{k_B}\left(\frac{1}{T_2} - \frac{1}{T_1}\right)\right]. Here ΔEkB≈16655 K\frac{\Delta E}{k_B} \approx 16655\text{ K}. The exponent is −16655×(12400−11600)=−16655×(−2.083×10−4)≈+3.47-16655 \times \left(\frac{1}{2400} - \frac{1}{1600}\right) = -16655 \times (-2.083 \times 10^{-4}) \approx +3.47. Thus, the population ratio increases by e3.47≈32.1e^{3.47} \approx 32.1 times. No, this population increase increases line intensity but does not alter the emitted photon energy (hν=ΔEh\nu = \Delta E).

Loading workspace…