Resources

A student in the laboratory is asked to distinguish between true solutions, colloids, and suspensions. The student shines a red diode laser pointer (wavelength λ=650 nm\lambda = 650\text{ nm}) through three optically transparent, uncolored liquid samples in standard cuvettes: Sample A exhibits no visible light path through the liquid; Sample B exhibits a distinct, luminous visible beam path through the liquid (the Tyndall effect) but does not settle upon standing for 48 hours48\text{ hours} or separate under ordinary paper filtration; Sample C appears cloudy and settles completely within 15 minutes15\text{ minutes}. Classify Samples A, B, and C as homogeneous mixture, colloid (microscopically heterogeneous), or suspension (macroscopically heterogeneous).

Answer and steps

Final answer

Sample A is a homogeneous mixture (true solution); Sample B is a colloid (microscopically heterogeneous); Sample C is a suspension (heterogeneous mixture).

Steps

01

Classification of Sample A

To classify each sample, we compare their optical behavior (the Tyndall effect), physical stability against gravity, and filterability with the standard characteristics of mixtures based on particle size.

  • Observation: When the red laser beam passes through Sample A, there is no visible beam path inside the liquid.
  • Underlying Principle: In a true solution (a homogeneous mixture), the dissolved solute particles are individual ions or small molecules (typically <1 nm< 1\text{ nm} in diameter). Because these particles are much smaller than the wavelength of visible light (λ=650 nm\lambda = 650\text{ nm}), they cannot scatter visible light significantly.
  • Conclusion: Sample A is a homogeneous mixture (true solution).

02

Classification of Sample B

  • Observation: Sample B exhibits a distinct, luminous beam path inside the liquid (the Tyndall effect), does not settle after 48 hours48\text{ hours}, and does not separate upon paper filtration.
  • Underlying Principle: A colloid consists of dispersed particles intermediate in size (typically 1 nm1\text{ nm} to 1000 nm1000\text{ nm}). These particles are large enough to scatter visible light via the Tyndall effect, yet small enough that thermal motion (Brownian motion) keeps them permanently suspended against gravitational settling, allowing them to pass through standard filter paper pores.
  • Conclusion: Sample B is a colloid (microscopically heterogeneous).

03

Classification of Sample C

  • Observation: Sample C appears cloudy and settles completely within 15 minutes15\text{ minutes}.
  • Underlying Principle: A suspension contains large, macroscopically visible particles (typically >1000 nm> 1000\text{ nm}). Due to their substantial mass, gravity readily overcomes thermal dispersion, causing the particles to precipitate or settle out rapidly upon standing.
  • Conclusion: Sample C is a suspension (heterogeneous mixture).

Summary and Common Pitfall

  • Pitfall: Do not confuse clear appearance with a true solution. Some colloids can appear optically clear at a glance; testing with a focused light beam (Tyndall effect) is necessary to reveal light scattering from colloidal particles.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student misidentifies the Tyndall effect as indicating a true solution because the beam cleanly passes through without settling or filtering out.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    No beam observed due to no light scattering. Sample A is a colloid (microscopically heterogeneous).

    Correct

    Sample A is a homogeneous mixture (true solution).

    You correctly noted that no light scattering occurred, but that is the defining characteristic of a true solution. Solute particles in a true solution are smaller than 1 nm1\text{ nm}, which is too small to scatter visible light, so no beam is visible.

  2. Step 2

    Visible laser beam path shows light transmission through a stable, clear liquid. Sample B is a homogeneous mixture.

    Correct

    Sample B is a colloid (microscopically heterogeneous).

    A visible beam path inside the liquid demonstrates the Tyndall effect, which is caused by light scattering off intermediate-sized particles (1 to 1000 nm1\text{ to }1000\text{ nm}). Because it scatters light and does not settle or filter out, Sample B is a colloid.

  3. Step 3

    Particles are large enough to settle out over 15 minutes. Sample C is a suspension (macroscopically heterogeneous).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that Sample C settles upon standing due to large particle size, classifying it as a suspension.

You accurately observed that Sample A produces no light scattering and Sample B shows a visible light path.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Tyndall effect inversion

You inverted the optical definitions of a true solution and a colloid.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated a visible laser beam path inside the liquid as simple light transmission through a homogeneous solution, rather than recognizing it as sideways light scattering (the Tyndall effect) caused by colloidal particles. In a true solution, light transmits cleanly without scattering, so no beam path is visible from the side.

REASONING PATH
Your ACEpath teacher’s suggested approach
Optical Appearance vs. Sideways Scattering
  • A beam path is visible from the side only when dispersed particles are large enough (1–1000 nm1\text{--}1000\text{ nm}) to scatter light into your eyes (the Tyndall effect).

  • When a beam is visible inside a liquid, classify it as a colloid or suspension (scattering present). When no beam is visible, classify it as a true solution.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the optical behavior of Sample A: No visible beam path means no scattering of visible light, which indicates dissolved particles are <1 nm< 1\text{ nm}. Thus, Sample A is a homogeneous mixture (true solution).

  2. Identify the optical and physical behavior of Sample B: A luminous beam path inside the liquid is the Tyndall effect (scattering by 1–1000 nm1\text{--}1000\text{ nm} particles). Because it does not settle or filter, Sample B is a colloid (microscopically heterogeneous).

  3. Combine with your correct classification of Sample C as a suspension.

Final answer

Sample A is a homogeneous mixture (true solution); Sample B is a colloid (microscopically heterogeneous); Sample C is a suspension (heterogeneous mixture).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the Tyndall effect mechanism: distinguish light transmission (passing straight through) from light scattering (deflecting light laterally so the beam becomes visible).

  • Practice classifying mixtures using a decision tree: first check stability/settling (suspensions), then check the Tyndall effect (colloids vs. solutions).

OverviewACEpath Teacher's Diagnosis

02 A student conflates any visible scattering of light with an unstable suspension, overlooking the fact that the mixture does not settle or separate under filtration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    No light scattering occurs because particles are at the molecular scale.   ⟹  \implies Sample A is a homogeneous mixture.

  2. Step 2

    Scattering of the laser pointer beam shows heterogeneous suspended particles.   ⟹  \implies Sample B is a suspension (macroscopically heterogeneous).

    Correct

    Sample B shows the Tyndall effect but does not settle upon standing or separate via filtration, classifying it as a colloid (microscopically heterogeneous).

    While visible light scattering (the Tyndall effect) proves the mixture is not a true solution, the fact that Sample B does not settle after 48 hours48\text{ hours} and passes through filter paper means the particles are of intermediate colloidal size (1–1000 nm1\text{--}1000\text{ nm}), not a macroscopic suspension.

  3. Step 3

    Mixture is cloudy and settles completely within 15 minutes15\text{ minutes}.   ⟹  \implies Sample C is a suspension (macroscopically heterogeneous).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly connected the absence of visible light scattering with homogeneous true solutions.

You correctly identified that rapid gravitational settling indicates a macroscopically heterogeneous suspension.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating light scattering with suspension instability

You noticed the light scattering in Sample B and immediately concluded it was a suspension, ignoring the critical clue that it remains stable for 48 hours without settling.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the Tyndall effect as unique to suspensions rather than the defining optical test that distinguishes colloids from true solutions, while relying on gravitational stability and filtration to separate colloids from suspensions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Optical Test vs. Stability Test
  • Both colloids and suspensions scatter light (Tyndall effect), but only suspensions settle out over time or get trapped by ordinary filter paper.

  • When you observe light scattering, always check the stability over time: if it stays permanently dispersed without settling, classify it as a colloid.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Observe that Sample B exhibits the Tyndall effect, ruling out a true solution because dispersed particles are ≥1 nm\ge 1\text{ nm}.

  2. Check physical stability: Sample B does not settle upon standing for 48 hours48\text{ hours} and passes through ordinary filter paper, which rules out an unstable macroscopic suspension (>1000 nm> 1000\text{ nm}).

  3. Conclude that particles must be intermediate in size (1–1000 nm1\text{--}1000\text{ nm}), making Sample B a colloid (microscopically heterogeneous).

Final answer

Sample A is a homogeneous mixture (true solution); Sample B is a colloid (microscopically heterogeneous); Sample C is a suspension (macroscopically heterogeneous).

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the two-step flowchart for liquid mixtures: first use the Tyndall effect to separate true solutions from dispersed mixtures, then use gravitational settling and filtration to distinguish colloids from suspensions.

  • Practice identifying everyday examples of colloids (such as milk, gelatin, and fog) to reinforce that colloids remain stably suspended despite scattering light.

Lock it in

Similar question

01

A student dissolves sodium chloride completely in distilled water in Cuvette 1, and mixes a few drops of milk into distilled water in Cuvette 2. When a green laser pointer is aimed through both, only Cuvette 2 shows a bright green beam path through the liquid. Classify each mixture as a true solution or a colloid, and explain why.

Answer

Cuvette 1 (saltwater) is a true solution (homogeneous mixture) because dissolved Na+\text{Na}^+ and Cl−\text{Cl}^- ions (<1 nm< 1\text{ nm}) do not scatter visible light, leaving no beam path. Cuvette 2 (dilute milk) is a colloid because dispersed fat/protein micelle particles (1–1000 nm1\text{--}1000\text{ nm}) scatter the laser light laterally (the Tyndall effect).

02

An unknown liquid mixture is passed through standard quantitative filter paper; no residue remains on the paper, and the filtrate remains slightly cloudy. After 72 hours72\text{ hours}, no sediment has formed at the bottom. When a light beam is directed through it, a distinct path of light is visible. Identify the type of mixture and explain why standard filtration failed to separate it.

Answer

The mixture is a colloid. Colloidal particles range from 1 to 1000 nm1\text{ to }1000\text{ nm}, which is smaller than the typical pore sizes of standard paper filters (several micrometers), allowing them to pass through completely. Brownian motion keeps them suspended against gravity indefinitely.

03

Three unlabeled beakers contain: (1) 0.1 M CuSO4(aq)0.1\text{ M } \text{CuSO}_4(aq), (2) a starch-in-water dispersion, and (3) fine calcium carbonate powder stirred into water. Propose a two-step experimental procedure using only a laser pointer and a 30-minute30\text{-minute} waiting period to uniquely identify the contents of each beaker.

Answer

Step 1: Allow all three beakers to stand undisturbed for 30 minutes30\text{ minutes}. Beaker 3 will show a solid sediment forming at the bottom, identifying it as the suspension (CaCO3\text{CaCO}_3 in water). Step 2: Shine a laser pointer through the remaining two stable liquids from the side. Beaker 1 (copper sulfate solution) will show no visible beam path inside the liquid (true solution), whereas Beaker 2 (starch dispersion) will exhibit a distinct glowing beam path via the Tyndall effect, identifying it as the colloid.

Loading workspace…