Resources

A chemical cold pack operates via the endothermic dissolution of solid urea: CO(NH2)2(s)→CO(NH2)2(aq)\text{CO}(\text{NH}_2)_2(s) \rightarrow \text{CO}(\text{NH}_2)_2(aq), which has an enthalpy of dissolution ΔHsoln=+15.3 kJ/mol\Delta H_{\text{soln}} = +15.3\text{ kJ/mol}. A student prepares a cold pack containing 180.0 g180.0\text{ g} of water initially at 25.0∘C25.0^\circ\text{C}. Upon fully dissolving an unknown mass mm of solid urea (molar mass =60.06 g/mol= 60.06\text{ g/mol}), the final temperature of the resulting homogeneous mixture stabilizes at 15.5∘C15.5^\circ\text{C}. Assuming the specific heat capacity of the solution is 4.05 J/(g⋅∘C)4.05\text{ J}/(\text{g}\cdot^\circ\text{C}) and heat exchange with the insulated pouch is negligible, determine the initial mass mm of solid urea in grams that was dissolved.

Answer and steps

Final answer

m=31.9 gm = 31.9\text{ g}

Steps

01

Identify the Heat Absorbed by Dissolution (qrxnq_{\text{rxn}})

To find the initial mass mm of solid urea, apply the law of conservation of energy to the dissolution process occurring inside the insulated pack.

The dissolution of urea is an endothermic process (ΔHsoln>0\Delta H_{\text{soln}} > 0), meaning heat is absorbed from the solution as the solid dissolves:

CO(NHX2)X2(s)⟶CO(NHX2)X2(aq)ΔHsoln=+15.3 kJ/mol=15 300 J/mol\ce{CO(NH2)2}(s) \longrightarrow \ce{CO(NH2)2}(aq) \quad \Delta H_{\text{soln}} = +15.3\text{ kJ/mol} = 15\,300\text{ J/mol}

The number of moles nn of dissolved urea is: n=mM=m60.06 g/moln = \frac{m}{M} = \frac{m}{60.06\text{ g/mol}}

The total heat absorbed by the chemical process is: qrxn=n⋅ΔHsoln=(m60.06)⋅15 300 J≈254.75 m Jq_{\text{rxn}} = n \cdot \Delta H_{\text{soln}} = \left(\frac{m}{60.06}\right) \cdot 15\,300\text{ J} \approx 254.75\,m\text{ J}


02

Identify the Heat Lost by the Solution (qsolnq_{\text{soln}})

The temperature of the solution drops from Ti=25.0∘CT_i = 25.0^\circ\text{C} to Tf=15.5∘CT_f = 15.5^\circ\text{C}: ΔT=Tf−Ti=15.5∘C−25.0∘C=−9.5∘C\Delta T = T_f - T_i = 15.5^\circ\text{C} - 25.0^\circ\text{C} = -9.5^\circ\text{C}

The total mass of the homogeneous solution is the sum of the mass of the solvent and the dissolved solute: msoln=mwater+m=180.0 g+mm_{\text{soln}} = m_{\text{water}} + m = 180.0\text{ g} + m

The heat exchanged by the solution is: qsoln=msoln⋅c⋅ΔT=(180.0+m)⋅4.05 J/(g⋅∘C)⋅(−9.5∘C)q_{\text{soln}} = m_{\text{soln}} \cdot c \cdot \Delta T = (180.0 + m) \cdot 4.05\text{ J}/(\text{g}\cdot^\circ\text{C}) \cdot (-9.5^\circ\text{C})

qsoln=−(180.0+m)⋅38.475 Jq_{\text{soln}} = -(180.0 + m) \cdot 38.475\text{ J}

Common Pitfall: Forgetting to include the mass of the dissolved solute mm in the total mass of the solution (msoln=mwater+mm_{\text{soln}} = m_{\text{water}} + m) underestimates the total thermal mass cooled during the process.


03

Apply Conservation of Energy and Solve for mm

Assuming negligible heat transfer to the surroundings (qrxn+qsoln=0q_{\text{rxn}} + q_{\text{soln}} = 0):

qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}}

(15 30060.06)m=(180.0+m)⋅38.475\left(\frac{15\,300}{60.06}\right)m = (180.0 + m) \cdot 38.475

Expand and group terms involving mm:

254.75 m=(180.0⋅38.475)+38.475 m254.75\,m = (180.0 \cdot 38.475) + 38.475\,m

254.75 m−38.475 m=6925.5254.75\,m - 38.475\,m = 6925.5

216.275 m=6925.5216.275\,m = 6925.5

m=6925.5216.275≈31.9 gm = \frac{6925.5}{216.275} \approx 31.9\text{ g}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses only the mass of water rather than the total solution mass (water plus urea) when calculating the heat absorbed from the solution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔT=15.5∘C−25.0∘C=−9.5∘C\Delta T = 15.5^\circ\text{C} - 25.0^\circ\text{C} = -9.5^\circ\text{C}

  2. Step 2

    qsoln=mwater⋅c⋅ΔT=180.0 g⋅4.05 J/(g⋅∘C)⋅(−9.5∘C)=−6925.5 J=−6.9255 kJq_{\text{soln}} = m_{\text{water}} \cdot c \cdot \Delta T = 180.0\text{ g} \cdot 4.05\text{ J}/(\text{g}\cdot^\circ\text{C}) \cdot (-9.5^\circ\text{C}) = -6925.5\text{ J} = -6.9255\text{ kJ}

    Correct

    qsoln=(mwater+m)⋅c⋅ΔT=(180.0+m)⋅4.05⋅(−9.5) J=−(180.0+m)⋅38.475 Jq_{\text{soln}} = (m_{\text{water}} + m) \cdot c \cdot \Delta T = (180.0 + m) \cdot 4.05 \cdot (-9.5)\text{ J} = -(180.0 + m) \cdot 38.475\text{ J}

    You used only the mass of liquid water rather than the total solution mass. Because the urea dissolves completely into a homogeneous solution whose specific heat capacity is given, the thermal mass that undergoes the temperature change is msoln=180.0 g+mm_{\text{soln}} = 180.0\text{ g} + m.

  3. Step 3

    qrxn=−qsoln=6.9255 kJ  ⟹  nurea=qrxnΔHsoln=6.9255 kJ15.3 kJ/mol=0.4526 molq_{\text{rxn}} = -q_{\text{soln}} = 6.9255\text{ kJ} \implies n_{\text{urea}} = \frac{q_{\text{rxn}}}{\Delta H_{\text{soln}}} = \frac{6.9255\text{ kJ}}{15.3\text{ kJ/mol}} = 0.4526\text{ mol}

    Correct

    qrxn=−qsoln  ⟹  (m60.06)(15 300)=(180.0+m)(38.475)q_{\text{rxn}} = -q_{\text{soln}} \implies \left(\frac{m}{60.06}\right)(15\,300) = (180.0 + m)(38.475)

    Your relationship between heat and enthalpy was conceptually sound, but carrying forward the incomplete solution mass prevented you from setting up the correct linear equation in terms of mm.

  4. Step 4

    m=0.4526 mol⋅60.06 g/mol=27.2 gm = 0.4526\text{ mol} \cdot 60.06\text{ g/mol} = 27.2\text{ g}

    Correct

    254.75 m−38.475 m=6925.5  ⟹  m=6925.5216.275≈31.9 g254.75\,m - 38.475\,m = 6925.5 \implies m = \frac{6925.5}{216.275} \approx 31.9\text{ g}

    Your molar mass multiplication was correct for your calculated moles, but the numerical result is inaccurate due to the earlier missing solute mass.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the temperature change ΔT=−9.5∘C\Delta T = -9.5^\circ\text{C}.

You correctly applied the conservation of energy condition qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}}.

You correctly converted between kilojoules, moles, and grams using molar mass and enthalpy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Solute Mass in Solution Calorimetry

You omitted the mass of dissolved urea mm from the solution mass in q=mcΔTq = mc\Delta T.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating solvent mass with total solution mass when applying calorimetry to dissolution processes where the specific heat capacity applies to the final mixture.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Thermal Mass
  • In solution calorimetry, msoln=msolvent+msolutem_{\text{soln}} = m_{\text{solvent}} + m_{\text{solute}}.

  • Check whether the given specific heat capacity is for pure water or for the solution, and always sum the solute and solvent masses.

Express Heat in Terms of Unknown Mass
  • When the solute mass mm is unknown, both qrxnq_{\text{rxn}} and qsolnq_{\text{soln}} depend linearly on mm.

  • Set up the equation n(m)ΔH=−(msolvent+m)cΔTn(m)\Delta H = -(m_{\text{solvent}} + m)c\Delta T and solve for mm algebraically.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the heat absorbed by the reaction: qrxn=m60.06 g/mol×15 300 J/mol≈254.75 m Jq_{\text{rxn}} = \frac{m}{60.06\text{ g/mol}} \times 15\,300\text{ J/mol} \approx 254.75\,m\text{ J}.

  2. Write the heat released by the solution: qsoln=(180.0+m)×4.05 J/(g⋅∘C)×(−9.5∘C)=−(180.0+m)(38.475) Jq_{\text{soln}} = (180.0 + m) \times 4.05\text{ J}/(\text{g}\cdot^\circ\text{C}) \times (-9.5^\circ\text{C}) = -(180.0 + m)(38.475)\text{ J}.

  3. Apply conservation of energy qrxn+qsoln=0q_{\text{rxn}} + q_{\text{soln}} = 0: 254.75 m=(180.0+m)(38.475)254.75\,m = (180.0 + m)(38.475).

  4. Expand and collect terms: 254.75 m−38.475 m=6925.5  ⟹  216.275 m=6925.5254.75\,m - 38.475\,m = 6925.5 \implies 216.275\,m = 6925.5.

  5. Solve for mm: m=6925.5216.275≈31.9 gm = \frac{6925.5}{216.275} \approx 31.9\text{ g}.

Final answer

m=31.9 gm = 31.9\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice dissolution calorimetry problems where the mass of solute is unknown.

  • Highlight whether a given heat capacity is for pure solvent or for the resulting solution before writing q=mcΔTq = mc\Delta T.

OverviewACEpath Teacher's Diagnosis

02 The student fails to convert the enthalpy of dissolution from kilojoules to joules (or heat from joules to kilojoules), causing a discrepancy by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔT=15.5∘C−25.0∘C=−9.5∘C  ⟹  qsoln=(180.0+m)⋅4.05⋅(−9.5)=−38.475⋅(180.0+m) J\Delta T = 15.5^\circ\text{C} - 25.0^\circ\text{C} = -9.5^\circ\text{C} \implies q_{\text{soln}} = (180.0 + m) \cdot 4.05 \cdot (-9.5) = -38.475 \cdot (180.0 + m)\text{ J}

  2. Step 2

    qrxn=(m60.06)⋅15.3=0.2547⋅m Jq_{\text{rxn}} = \left(\frac{m}{60.06}\right) \cdot 15.3 = 0.2547 \cdot m\text{ J}

    Correct

    qrxn=(m60.06 g/mol)⋅15 300 J/mol=254.75 m Jq_{\text{rxn}} = \left(\frac{m}{60.06\text{ g/mol}}\right) \cdot 15\,300\text{ J/mol} = 254.75\,m\text{ J}

    You multiplied moles by ΔHsoln\Delta H_{\text{soln}} as 15.315.3, but ΔHsoln\Delta H_{\text{soln}} is given in kJ/mol\text{kJ/mol} while qsolnq_{\text{soln}} is evaluated in J\text{J}. You need to multiply by 10001000 so that both heat quantities share the same energy unit.

  3. Step 3

    0.2547⋅m=6925.5+38.475⋅m  ⟹  −38.22⋅m=6925.5  ⟹  m=181 g0.2547 \cdot m = 6925.5 + 38.475 \cdot m \implies -38.22 \cdot m = 6925.5 \implies m = 181\text{ g}

    Correct

    254.75 m=6925.5+38.475 m  ⟹  216.275 m=6925.5  ⟹  m≈31.9 g254.75\,m = 6925.5 + 38.475\,m \implies 216.275\,m = 6925.5 \implies m \approx 31.9\text{ g}

    Because qrxnq_{\text{rxn}} was smaller by a factor of 10001000, the linear equation yielded a negative value for mass, which you then treated as positive. Carrying the correct coefficient resolves the sign and yields the correct mass.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly included the solute mass mm in the total mass of the solution.

You correctly applied q=mcΔTq = mc\Delta T using the proper initial and final temperatures.

You recognized that energy conservation requires qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}} in an insulated system.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Units and dimensional mismatch

You entered 15.315.3 without multiplying by 10001000 to convert kilojoules to joules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit prefixes when combining thermochemical data (given in kJ/mol\text{kJ/mol}) with specific heat capacity data (given in J/(g⋅∘C)\text{J}/(\text{g}\cdot^\circ\text{C})).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency Check
  • When equating qrxnq_{\text{rxn}} and qsolnq_{\text{soln}}, both quantities must be expressed in the exact same energy unit (either both in J\text{J} or both in kJ\text{kJ}).

  • Always convert ΔH\Delta H from kJ/mol\text{kJ/mol} to J/mol\text{J/mol} by multiplying by 10001000, or convert qsolnq_{\text{soln}} to kJ\text{kJ} by dividing by 10001000 before solving.

Physical Sanity Check
  • A physical mass must be strictly positive.

  • If an algebraic solution produces a negative mass, pause and re-check signs or unit scales rather than dropping the negative sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the enthalpy of dissolution to joules per mole: ΔHsoln=15.3 kJ/mol=15 300 J/mol\Delta H_{\text{soln}} = 15.3\text{ kJ/mol} = 15\,300\text{ J/mol}.

  2. Calculate heat absorbed by the reaction: qrxn=(m60.06)⋅15 300=254.75 m Jq_{\text{rxn}} = \left(\frac{m}{60.06}\right) \cdot 15\,300 = 254.75\,m\text{ J}.

  3. Equate qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}}: 254.75 m=38.475(180.0+m)=6925.5+38.475 m254.75\,m = 38.475(180.0 + m) = 6925.5 + 38.475\,m.

  4. Rearrange and solve for mm: 216.275 m=6925.5  ⟹  m≈31.9 g216.275\,m = 6925.5 \implies m \approx 31.9\text{ g}.

Final answer

m=31.9 gm = 31.9\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to track unit prefixes when working between thermochemical tables and calorimetry equations.

  • Practice two more dissolution calorimetry problems where solute mass affects total solution mass.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the molar mass relationship by dividing mass by molar enthalpy or dividing molar mass by moles, calculating moles of urea as m · 60.06 instead of m / 60.06.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔT=15.5∘C−25.0∘C=−9.5∘C\Delta T = 15.5^\circ\text{C} - 25.0^\circ\text{C} = -9.5^\circ\text{C}

  2. Step 2

    qsoln=180.0 g⋅4.05 J/(g⋅∘C)⋅(−9.5∘C)=−6925.5 J=−6.9255 kJq_{\text{soln}} = 180.0\text{ g} \cdot 4.05\text{ J}/(\text{g}\cdot^\circ\text{C}) \cdot (-9.5^\circ\text{C}) = -6925.5\text{ J} = -6.9255\text{ kJ}

    Correct

    qsoln=msoln⋅c⋅ΔT=(180.0+m)⋅4.05 J/(g⋅∘C)⋅(−9.5∘C)=−(180.0+m)⋅38.475 Jq_{\text{soln}} = m_{\text{soln}} \cdot c \cdot \Delta T = (180.0 + m) \cdot 4.05\text{ J}/(\text{g}\cdot^\circ\text{C}) \cdot (-9.5^\circ\text{C}) = -(180.0 + m) \cdot 38.475\text{ J}

    You used only the mass of water (180.0 g180.0\text{ g}) instead of the total mass of the homogeneous solution (msoln=180.0 g+mm_{\text{soln}} = 180.0\text{ g} + m). The dissolved urea contributes to the total mass being cooled.

  3. Step 3

    qrxn=6.9255 kJq_{\text{rxn}} = 6.9255\text{ kJ}

    Correct

    qrxn=−qsoln=(180.0+m)⋅38.475 Jq_{\text{rxn}} = -q_{\text{soln}} = (180.0 + m) \cdot 38.475\text{ J}

    You correctly recognized that qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}} for an insulated system, though the numerical value is affected by omitting mm from the solution mass.

  4. Step 4

    nurea=6.9255 kJ/15.3 kJ/mol=0.4526 moln_{\text{urea}} = 6.9255\text{ kJ} / 15.3\text{ kJ/mol} = 0.4526\text{ mol}

    Correct

    qrxn=n⋅ΔHsoln=(m60.06 g/mol)(15 300 J/mol)q_{\text{rxn}} = n \cdot \Delta H_{\text{soln}} = \left(\frac{m}{60.06\text{ g/mol}}\right)(15\,300\text{ J/mol})

    Your relationship n=qrxn/ΔHsolnn = q_{\text{rxn}} / \Delta H_{\text{soln}} is conceptually valid, but qrxnq_{\text{rxn}} depends on the unknown mass mm.

  5. Step 5

    m=nurea/60.06 g/mol=0.4526/60.06=0.00754 gm = n_{\text{urea}} / 60.06\text{ g/mol} = 0.4526 / 60.06 = 0.00754\text{ g}

    Correct

    m=31.9 gm = 31.9\text{ g}

    You divided moles by molar mass (n/Mn / M) instead of multiplying (m=n⋅Mm = n \cdot M). Furthermore, solving the complete energy balance (180.0+m)(4.05)(9.5)=(m/60.06)(15 300)(180.0 + m)(4.05)(9.5) = (m / 60.06)(15\,300) yields m=31.9 gm = 31.9\text{ g}.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the temperature change ΔT=−9.5∘C\Delta T = -9.5^\circ\text{C} accurately.

You correctly applied the conservation of energy principle qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}} for an endothermic process in an insulated container.

You correctly used the enthalpy of dissolution to relate heat absorbed to moles of solute.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Calorimetry solution mass omission and inverted molar mass formula

Dividing moles by molar mass (0.4526/60.060.4526 / 60.06) rather than multiplying (0.4526×60.060.4526 \times 60.06).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the solvent mass as the total solution mass and did not set up an algebraic equation where mm appears on both sides (in msoln=mwater+mm_{\text{soln}} = m_{\text{water}} + m and in qrxn=n⋅ΔHq_{\text{rxn}} = n \cdot \Delta H). Additionally, you inverted the mole-to-mass dimensional formula.

REASONING PATH
Your ACEpath teacher’s suggested approach
Total Solution Mass in Solution Calorimetry
  • In solution calorimetry, msoln=msolvent+msolutem_{\text{soln}} = m_{\text{solvent}} + m_{\text{solute}}.

  • Always write msoln=(mwater+m)m_{\text{soln}} = (m_{\text{water}} + m) when the solute dissolves homogeneously into the solvent.

Converting Moles to Mass
  • Mass=moles×molar mass\text{Mass} = \text{moles} \times \text{molar mass} (m=n⋅Mm = n \cdot M), because mol×(g/mol)=g\text{mol} \times (\text{g/mol}) = \text{g}.

  • Check your units: dividing moles by g/mol\text{g/mol} gives mol2/g\text{mol}^2/\text{g}, not grams.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the heat lost by the solution: qsoln=(180.0+m)⋅4.05⋅(−9.5)=−(180.0+m)(38.475) Jq_{\text{soln}} = (180.0 + m) \cdot 4.05 \cdot (-9.5) = -(180.0 + m)(38.475)\text{ J}.

  2. Express the heat absorbed by dissolution: qrxn=(m60.06)⋅15 300 J≈254.75 m Jq_{\text{rxn}} = \left(\frac{m}{60.06}\right) \cdot 15\,300\text{ J} \approx 254.75\,m\text{ J}.

  3. Set qrxn+qsoln=0  ⟹  254.75 m=38.475(180.0+m)q_{\text{rxn}} + q_{\text{soln}} = 0 \implies 254.75\,m = 38.475(180.0 + m).

  4. Expand and group terms: 254.75 m−38.475 m=6925.5  ⟹  216.275 m=6925.5254.75\,m - 38.475\,m = 6925.5 \implies 216.275\,m = 6925.5.

Final answer

m=31.9 gm = 31.9\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include the solute mass mm in the total solution mass whenever a solid dissolves into a solvent.

  • Verify dimensional consistency on unit conversions: multiply moles by g/mol\text{g/mol} to obtain mass in grams.

Lock it in

Similar question

01

A sample of 15.0 g15.0\text{ g} of ammonium nitrate (NH4NO3\text{NH}_4\text{NO}_3, molar mass =80.04 g/mol= 80.04\text{ g/mol}) dissolves in 125.0 g125.0\text{ g} of water in an insulated cup. The temperature drops by 8.20∘C8.20^\circ\text{C}. Assuming the specific heat capacity of the solution is 4.10 J/(g⋅∘C)4.10\text{ J}/(\text{g}\cdot^\circ\text{C}), calculate the enthalpy of dissolution ΔHsoln\Delta H_{\text{soln}} in kJ/mol\text{kJ/mol}.

Answer

msoln=125.0 g+15.0 g=140.0 gm_{\text{soln}} = 125.0\text{ g} + 15.0\text{ g} = 140.0\text{ g}. qsoln=140.0 g×4.10 J/(g⋅∘C)×(−8.20∘C)=−4706.8 Jq_{\text{soln}} = 140.0\text{ g} \times 4.10\text{ J}/(\text{g}\cdot^\circ\text{C}) \times (-8.20^\circ\text{C}) = -4706.8\text{ J}. qrxn=+4706.8 J=+4.707 kJq_{\text{rxn}} = +4706.8\text{ J} = +4.707\text{ kJ}. n=15.0 g80.04 g/mol=0.1874 moln = \frac{15.0\text{ g}}{80.04\text{ g/mol}} = 0.1874\text{ mol}. ΔHsoln=+4.707 kJ0.1874 mol=+25.1 kJ/mol\Delta H_{\text{soln}} = \frac{+4.707\text{ kJ}}{0.1874\text{ mol}} = +25.1\text{ kJ/mol}.

02

An unknown mass mm of potassium hydroxide (KOH\text{KOH}, molar mass =56.11 g/mol= 56.11\text{ g/mol}) is dissolved in 200.0 g200.0\text{ g} of water. The exothermic dissolution has ΔHsoln=−57.6 kJ/mol\Delta H_{\text{soln}} = -57.6\text{ kJ/mol}. The temperature rises from 22.0∘C22.0^\circ\text{C} to 34.5∘C34.5^\circ\text{C}. Taking csoln=4.00 J/(g⋅∘C)c_{\text{soln}} = 4.00\text{ J}/(\text{g}\cdot^\circ\text{C}), find the dissolved mass mm of KOH\text{KOH} in grams.

Answer

ΔT=+12.5∘C\Delta T = +12.5^\circ\text{C}. qsoln=(200.0+m)(4.00)(12.5)=50.0(200.0+m)=10 000+50.0m Jq_{\text{soln}} = (200.0 + m)(4.00)(12.5) = 50.0(200.0 + m) = 10\,000 + 50.0m\text{ J}. qrxn=−qsoln=−(10 000+50.0m) Jq_{\text{rxn}} = -q_{\text{soln}} = -(10\,000 + 50.0m)\text{ J}. Also, qrxn=nΔHsoln=(m56.11)(−57 600 J)=−1026.55m Jq_{\text{rxn}} = n \Delta H_{\text{soln}} = \left(\frac{m}{56.11}\right)(-57\,600\text{ J}) = -1026.55m\text{ J}. Equating: −1026.55m=−(10 000+50.0m)  ⟹  1026.55m−50.0m=10 000-1026.55m = -(10\,000 + 50.0m) \implies 1026.55m - 50.0m = 10\,000. 976.55m=10 000  ⟹  m=10.2 g976.55m = 10\,000 \implies m = 10.2\text{ g}.

03

In a cold-pack design, solid salt XX (molar mass =100.0 g/mol= 100.0\text{ g/mol}, ΔHsoln=+24.0 kJ/mol\Delta H_{\text{soln}} = +24.0\text{ kJ/mol}) dissolves in 250.0 g250.0\text{ g} of water initially at 20.0∘C20.0^\circ\text{C}. The target final temperature is 5.0∘C5.0^\circ\text{C}. If csoln=3.90 J/(g⋅∘C)c_{\text{soln}} = 3.90\text{ J}/(\text{g}\cdot^\circ\text{C}) and the insulated container absorbs an additional 120 J/∘C120\text{ J}/^\circ\text{C} during cooling (Ccal=120 J/∘CC_{\text{cal}} = 120\text{ J}/^\circ\text{C}), determine the required mass mm of salt XX in grams.

Answer

ΔT=5.0−20.0=−15.0∘C\Delta T = 5.0 - 20.0 = -15.0^\circ\text{C}. qsurr=qsoln+qcal=(250.0+m)(3.90)(−15.0)+(120)(−15.0)=−58.5(250.0+m)−1800=−16 425−58.5m Jq_{\text{surr}} = q_{\text{soln}} + q_{\text{cal}} = (250.0 + m)(3.90)(-15.0) + (120)(-15.0) = -58.5(250.0 + m) - 1800 = -16\,425 - 58.5m\text{ J}. qrxn=−qsurr=16 425+58.5m Jq_{\text{rxn}} = -q_{\text{surr}} = 16\,425 + 58.5m\text{ J}. qrxn=(m100.0)(24 000 J)=240m Jq_{\text{rxn}} = \left(\frac{m}{100.0}\right)(24\,000\text{ J}) = 240m\text{ J}. 240m=16 425+58.5m  ⟹  181.5m=16 425  ⟹  m≈90.5 g240m = 16\,425 + 58.5m \implies 181.5m = 16\,425 \implies m \approx 90.5\text{ g}.

Loading workspace…