Resources

A 25.00 mL25.00\text{ mL} sample of 0.200 M0.200\text{ M} sulfuric acid (H2SO4\text{H}_2\text{SO}_4, a diprotic strong acid for its first proton) is titrated with 0.250 M0.250\text{ M} sodium hydroxide (NaOH\text{NaOH}). Avoiding the common trap of treating sulfuric acid as monoprotic or assuming identical stoichiometry to HCl\text{HCl}, calculate the volume of NaOH\text{NaOH} titrant in milliliters needed to completely neutralize both protons to form Na2SO4\text{Na}_2\text{SO}_4.

Answer and steps

Final answer

40.0 mL40.0\text{ mL}

Steps

01

Write the balanced chemical equation

To find the volume of NaOH\ce{NaOH} required to completely neutralize the sulfuric acid, we determine the stoichiometric relationship between the diprotic acid and the strong base.

Sulfuric acid (HX2SOX4\ce{H2SO4}) has two ionizable protons per formula unit. Complete neutralization to form sodium sulfate (NaX2SOX4\ce{Na2SO4}) requires two moles of NaOH\ce{NaOH} for every mole of HX2SOX4\ce{H2SO4}:

HX2SOX4(aq)+2 NaOH(aq)→NaX2SOX4(aq)+2 HX2O(l)\ce{H2SO4 (aq) + 2NaOH (aq) -> Na2SO4 (aq) + 2H2O (l)}

02

Calculate the moles of HX2SOX4\ce{H2SO4}

Use the concentration and volume of the HX2SOX4\ce{H2SO4} sample:

nHX2SOX4=MHX2SOX4⋅VHX2SOX4n_{\ce{H2SO4}} = M_{\ce{H2SO4}} \cdot V_{\ce{H2SO4}} nHX2SOX4=0.200 mol/L⋅0.02500 L=5.00×10−3 moln_{\ce{H2SO4}} = 0.200\text{ mol/L} \cdot 0.02500\text{ L} = 5.00 \times 10^{-3}\text{ mol}

03

Determine the required moles of NaOH\ce{NaOH}

From the stoichiometric ratio (1 mol HX2SOX4:2 mol NaOH1\text{ mol }\ce{H2SO4} : 2\text{ mol }\ce{NaOH}):

nNaOH=2⋅nHX2SOX4=2⋅(5.00×10−3 mol)=1.00×10−2 moln_{\ce{NaOH}} = 2 \cdot n_{\ce{H2SO4}} = 2 \cdot (5.00 \times 10^{-3}\text{ mol}) = 1.00 \times 10^{-2}\text{ mol}

Common Pitfall: Assuming a 1:11:1 molar ratio (as with monoprotic acids like HCl\ce{HCl}) results in calculating only half the required volume (20.0 mL20.0\text{ mL}), which corresponds to the first equivalence point (NaHSOX4\ce{NaHSO4}), leaving the second proton unneutralized.

04

Calculate the volume of the NaOH\ce{NaOH} solution

Divide the required moles of NaOH\ce{NaOH} by its molarity:

VNaOH=nNaOHMNaOH=1.00×10−2 mol0.250 mol/L=0.0400 LV_{\ce{NaOH}} = \frac{n_{\ce{NaOH}}}{M_{\ce{NaOH}}} = \frac{1.00 \times 10^{-2}\text{ mol}}{0.250\text{ mol/L}} = 0.0400\text{ L}

Convert liters to milliliters:

VNaOH=0.0400 L⋅1000 mL/L=40.0 mLV_{\ce{NaOH}} = 0.0400\text{ L} \cdot 1000\text{ mL/L} = 40.0\text{ mL}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the neutralization as a 1:1 mole ratio between sulfuric acid and sodium hydroxide, halving the required moles and volume of titrant to 20.0 mL.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    HX2SOX4+NaOH→NaHSOX4+HX2O\ce{H2SO4 + NaOH -> NaHSO4 + H2O}

    Correct

    HX2SOX4+2 NaOH→NaX2SOX4+2 HX2O\ce{H2SO4 + 2NaOH -> Na2SO4 + 2H2O}

    The problem specifies neutralizing both ionizable protons to form sodium sulfate (NaX2SOX4\ce{Na2SO4}). Your equation only removes the first proton to form sodium bisulfate (NaHSOX4\ce{NaHSO4}), leading to a 1:11:1 mole ratio instead of the required 1:21:2 ratio.

  2. Step 2

    mol HX2SOX4=0.02500×0.200=0.00500 mol\text{mol }\ce{H2SO4} = 0.02500 \times 0.200 = 0.00500\text{ mol}

  3. Step 3

    mol NaOH=0.00500 mol\text{mol }\ce{NaOH} = 0.00500\text{ mol}

    Correct

    nNaOH=2×0.00500 mol=0.0100 moln_{\ce{NaOH}} = 2 \times 0.00500\text{ mol} = 0.0100\text{ mol}

    This step follows your 1:11:1 mole ratio from Step 1. Because complete neutralization requires 2 mol NaOH2\text{ mol }\ce{NaOH} for every 1 mol HX2SOX41\text{ mol }\ce{H2SO4}, the actual moles needed are 2×0.00500 mol=0.0100 mol2 \times 0.00500\text{ mol} = 0.0100\text{ mol}.

  4. Step 4

    V(NaOH)=0.005000.250=0.0200 L=20.0 mLV(\ce{NaOH}) = \frac{0.00500}{0.250} = 0.0200\text{ L} = 20.0\text{ mL}

    Correct

    VNaOH=0.0100 mol0.250 M=0.0400 L=40.0 mLV_{\ce{NaOH}} = \frac{0.0100\text{ mol}}{0.250\text{ M}} = 0.0400\text{ L} = 40.0\text{ mL}

    Your division and unit conversion were executed correctly, but using the halved mole quantity propagated the error to your final volume.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of sulfuric acid from its molarity and volume.

You correctly applied the relationship V=nMV = \frac{n}{M} to find the solution volume.

You accurately converted liters to milliliters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Diprotic Acid Neutralization Stoichiometry Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed a 1:11:1 stoichiometric ratio between the acid and the base, neutralizing only one proton to form NaHSOX4\ce{NaHSO4} rather than balancing the equation for complete neutralization of a diprotic acid to NaX2SOX4\ce{Na2SO4}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Acid Proticity
  • A polyprotic acid with nn acidic protons requires nn moles of a monobasic hydroxide titrant (such as NaOH\ce{NaOH}) per mole of acid for complete neutralization.

  • Check whether the problem asks for complete neutralization or neutralization to a specific equivalence point, and balance the equation with the fully deprotonated conjugate base (SOX4X2−\ce{SO4^2-}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the 1:21:2 stoichiometric ratio from HX2SOX4+2 NaOH→NaX2SOX4+2 HX2O\ce{H2SO4 + 2NaOH -> Na2SO4 + 2H2O}: nNaOH=2×nHX2SOX4=2×0.00500 mol=0.0100 moln_{\ce{NaOH}} = 2 \times n_{\ce{H2SO4}} = 2 \times 0.00500\text{ mol} = 0.0100\text{ mol}.

  2. Calculate the required volume of 0.250 M NaOH0.250\text{ M }\ce{NaOH}: VNaOH=0.0100 mol0.250 mol/L=0.0400 L=40.0 mLV_{\ce{NaOH}} = \frac{0.0100\text{ mol}}{0.250\text{ mol/L}} = 0.0400\text{ L} = 40.0\text{ mL}.

Final answer

40.0 mL40.0\text{ mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the fully balanced chemical equation matching the specified product salt before setting up mole ratios.

  • Watch for prefixes like diprotic (HX2SOX4\ce{H2SO4}, HX2CX2OX4\ce{H2C2O4}) or triprotic (HX3POX4\ce{H3PO4}) that indicate a non-1:11:1 equivalence ratio.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the stoichiometric ratio by dividing the moles of acid by 2 instead of multiplying by 2, yielding 10.0 mL of NaOH.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    HX2SOX4+2 NaOH→NaX2SOX4+2 HX2O\ce{H2SO4 + 2NaOH -> Na2SO4 + 2H2O}

  2. Step 2

    mol HX2SOX4=0.02500×0.200=0.00500 mol\text{mol } \ce{H2SO4} = 0.02500 \times 0.200 = 0.00500\text{ mol}

  3. Step 3

    mol NaOH=0.005002=0.00250 mol\text{mol } \ce{NaOH} = \frac{0.00500}{2} = 0.00250\text{ mol}

    Correct

    nNaOH=2×nHX2SOX4=2×0.00500 mol=0.0100 moln_{\ce{NaOH}} = 2 \times n_{\ce{H2SO4}} = 2 \times 0.00500\text{ mol} = 0.0100\text{ mol}

    Because each mole of HX2SOX4\ce{H2SO4} requires 2 moles2\text{ moles} of NaOH\ce{NaOH} for complete neutralization, you must multiply the moles of acid by 22, not divide by 22.

  4. Step 4

    V(NaOH)=0.002500.250=0.0100 L=10.0 mLV(\ce{NaOH}) = \frac{0.00250}{0.250} = 0.0100\text{ L} = 10.0\text{ mL}

    Correct

    VNaOH=0.0100 mol0.250 mol/L=0.0400 L=40.0 mLV_{\ce{NaOH}} = \frac{0.0100\text{ mol}}{0.250\text{ mol/L}} = 0.0400\text{ L} = 40.0\text{ mL}

    Your formula and unit conversion were executed properly, but the numerical answer is incorrect due to the inverted stoichiometric ratio from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly balanced the chemical equation with a 1:21:2 stoichiometric ratio.

You calculated the moles of sulfuric acid accurately from concentration and volume.

You correctly applied the relationship V=nMV = \frac{n}{M} to find the final titrant volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted stoichiometric ratio

You divided by the stoichiometric coefficient 2 instead of multiplying the moles of diprotic acid by 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Setting up mole conversions mentally or without explicit dimensional analysis units can lead to inverting the conversion factor (2 mol NaOH1 mol HX2SOX4)\left(\frac{2\text{ mol }\ce{NaOH}}{1\text{ mol }\ce{H2SO4}}\right).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the stoichiometric ratio direction
  • For a diprotic acid neutralized by a monobasic base, each acid molecule releases 2 H+2\text{ H}^+ ions, so nbase=2×nacidn_{\text{base}} = 2 \times n_{\text{acid}}.

  • Always write out dimensional analysis with explicit units: mol HX2SOX4×2 mol NaOH1 mol HX2SOX4\text{mol }\ce{H2SO4} \times \frac{2\text{ mol }\ce{NaOH}}{1\text{ mol }\ce{H2SO4}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the balanced mole ratio: nNaOH=0.00500 mol HX2SOX4×2 mol NaOH1 mol HX2SOX4=0.0100 mol NaOHn_{\ce{NaOH}} = 0.00500\text{ mol }\ce{H2SO4} \times \frac{2\text{ mol }\ce{NaOH}}{1\text{ mol }\ce{H2SO4}} = 0.0100\text{ mol }\ce{NaOH}.

  2. Calculate the required titrant volume: VNaOH=0.0100 mol0.250 mol/L=0.0400 LV_{\ce{NaOH}} = \frac{0.0100\text{ mol}}{0.250\text{ mol/L}} = 0.0400\text{ L}.

  3. Convert liters to milliliters: 0.0400 L×1000 mL/L=40.0 mL0.0400\text{ L} \times 1000\text{ mL/L} = 40.0\text{ mL}.

Final answer

40.0 mL40.0\text{ mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice using explicit unit factors (e.g., 2 mol base1 mol acid\frac{2\text{ mol base}}{1\text{ mol acid}}) to ensure units cancel properly.

  • Perform a quick sanity check: since each acid molecule provides two protons, neutralizing it requires more moles of a monobasic base than the moles of acid present.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the required moles of NaOH by molarity instead of dividing to determine volume, arriving at 2.50 mL.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    HX2SOX4+2 NaOH→NaX2SOX4+2 HX2O\ce{H2SO4 + 2NaOH -> Na2SO4 + 2H2O}

  2. Step 2

    mol HX2SOX4=0.02500×0.200=0.00500 mol\text{mol }\ce{H2SO4} = 0.02500 \times 0.200 = 0.00500\text{ mol}

  3. Step 3

    mol NaOH=2×0.00500=0.0100 mol\text{mol }\ce{NaOH} = 2 \times 0.00500 = 0.0100\text{ mol}

  4. Step 4

    V(NaOH)=0.0100×0.250=0.00250 L=2.50 mLV(\ce{NaOH}) = 0.0100 \times 0.250 = 0.00250\text{ L} = 2.50\text{ mL}

    Correct

    VNaOH=nNaOHMNaOH=0.0100 mol0.250 mol/L=0.0400 L=40.0 mLV_{\ce{NaOH}} = \frac{n_{\ce{NaOH}}}{M_{\ce{NaOH}}} = \frac{0.0100\text{ mol}}{0.250\text{ mol/L}} = 0.0400\text{ L} = 40.0\text{ mL}

    You multiplied moles by molarity rather than dividing by molarity. Because M=nVM = \frac{n}{V}, rearranging for volume gives V=nMV = \frac{n}{M}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the balanced chemical equation for the complete neutralization of diprotic sulfuric acid.

You accurately calculated the initial moles of HX2SOX4\ce{H2SO4} from its concentration and volume.

You properly applied the 1:21:2 mole ratio to find that 0.0100 mol0.0100\text{ mol} of NaOH\ce{NaOH} is needed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Molarity Formula

Multiplying moles by concentration (n×Mn \times M) rather than dividing (n/Mn / M) to obtain volume.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the algebraic rearrangement of the molarity equation M=nVM = \frac{n}{V}. When solving for volume VV, the relationship requires dividing moles by molarity (V=nMV = \frac{n}{M}), which yields units of liters (mol/(mol/L)=L\text{mol} / (\text{mol/L}) = \text{L}). Multiplying yields mol2/L\text{mol}^2/\text{L}, which is dimensionally incorrect.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity Definition & Rearrangement
  • M=nV  ⟹  n=M⋅V  ⟹  V=nMM = \frac{n}{V} \implies n = M \cdot V \implies V = \frac{n}{M}

  • Check that volume is isolated by placing moles in the numerator and molarity in the denominator.

Dimensional Analysis Check
  • molmol/L=mol⋅Lmol=L\frac{\text{mol}}{\text{mol}/\text{L}} = \text{mol} \cdot \frac{\text{L}}{\text{mol}} = \text{L}

  • Always carry units through your calculation to verify that moles cancel out and leave liters.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. VNaOH=nNaOHMNaOH=0.0100 mol0.250 mol/L=0.0400 LV_{\ce{NaOH}} = \frac{n_{\ce{NaOH}}}{M_{\ce{NaOH}}} = \frac{0.0100\text{ mol}}{0.250\text{ mol/L}} = 0.0400\text{ L}

  2. VNaOH=0.0400 L×1000 mL/L=40.0 mLV_{\ce{NaOH}} = 0.0400\text{ L} \times 1000\text{ mL/L} = 40.0\text{ mL}

Final answer

40.0 mL40.0\text{ mL}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the algebraic forms of M=nVM = \frac{n}{V} to ensure quick, reliable rearrangement when solving for volume.

  • Write out complete physical units during dimensional analysis so that an inverted fraction becomes immediately obvious.

Lock it in

Similar question

01

A 30.00 mL30.00\text{ mL} sample of 0.150 M0.150\text{ M} oxalic acid (HX2CX2OX4\ce{H2C2O4}, a diprotic acid) is titrated with 0.200 M KOH0.200\text{ M }\ce{KOH}. Calculate the volume of KOH\ce{KOH} in milliliters required to reach the second equivalence point.

Answer

Moles of acid: n=0.03000 L×0.150 M=0.00450 moln = 0.03000\text{ L} \times 0.150\text{ M} = 0.00450\text{ mol}. Complete neutralization requires 2 mol KOH2\text{ mol }\ce{KOH} per mole of HX2CX2OX4\ce{H2C2O4}, so nKOH=2×0.00450=0.00900 moln_{\ce{KOH}} = 2 \times 0.00450 = 0.00900\text{ mol}. Required volume: V=0.00900 mol0.200 M=0.0450 L=45.0 mLV = \frac{0.00900\text{ mol}}{0.200\text{ M}} = 0.0450\text{ L} = 45.0\text{ mL}.

02

What volume of 0.300 M NaOH0.300\text{ M }\ce{NaOH} is needed to completely neutralize 20.00 mL20.00\text{ mL} of 0.100 M0.100\text{ M} phosphoric acid (HX3POX4\ce{H3PO4}, a triprotic acid) to form NaX3POX4\ce{Na3PO4}?

Answer

Moles of acid: n=0.02000 L×0.100 M=0.00200 moln = 0.02000\text{ L} \times 0.100\text{ M} = 0.00200\text{ mol}. Complete neutralization requires 3 mol NaOH3\text{ mol }\ce{NaOH} per mole of HX3POX4\ce{H3PO4}, so nNaOH=3×0.00200=0.00600 moln_{\ce{NaOH}} = 3 \times 0.00200 = 0.00600\text{ mol}. Required volume: V=0.00600 mol0.300 M=0.0200 L=20.0 mLV = \frac{0.00600\text{ mol}}{0.300\text{ M}} = 0.0200\text{ L} = 20.0\text{ mL}.

03

A student dissolves 0.490 g0.490\text{ g} of pure sulfuric acid (HX2SOX4\ce{H2SO4}, molar mass 98.08 g/mol98.08\text{ g/mol}) in water and titrates it with a Ba(OH)X2\ce{Ba(OH)2} solution. If 25.0 mL25.0\text{ mL} of the Ba(OH)X2\ce{Ba(OH)2} solution completely neutralizes both protons, determine the molarity of the Ba(OH)X2\ce{Ba(OH)2} solution.

Answer

Moles of HX2SOX4\ce{H2SO4}: n=0.490 g98.08 g/mol≈0.00500 moln = \frac{0.490\text{ g}}{98.08\text{ g/mol}} \approx 0.00500\text{ mol}. The balanced equation is HX2SOX4+Ba(OH)X2→BaSOX4+2 HX2O\ce{H2SO4 + Ba(OH)2 -> BaSO4 + 2H2O}, giving a 1:11:1 stoichiometry because Ba(OH)X2\ce{Ba(OH)2} provides two OHX−\ce{OH-} ions per formula unit. Thus, nBa(OH)X2=0.00500 moln_{\ce{Ba(OH)2}} = 0.00500\text{ mol}. Molarity: M=0.00500 mol0.0250 L=0.200 MM = \frac{0.00500\text{ mol}}{0.0250\text{ L}} = 0.200\text{ M}.

Loading workspace…