Resources

A common misconception suggests that compounds with higher lattice energies are always less soluble in water because more energy is required to disrupt the crystal lattice. Consider sodium fluoride (NaF\text{NaF}, lattice energy ΔHlattice=−923 kJ/mol\Delta H_{\text{lattice}} = -923\text{ kJ/mol}, enthalpy of hydration ΔHhyd=−924 kJ/mol\Delta H_{\text{hyd}} = -924\text{ kJ/mol}) and potassium fluoride (KF\text{KF}, lattice energy ΔHlattice=−821 kJ/mol\Delta H_{\text{lattice}} = -821\text{ kJ/mol}, enthalpy of hydration ΔHhyd=−838 kJ/mol\Delta H_{\text{hyd}} = -838\text{ kJ/mol}). (a) Calculate the enthalpy of solution ΔHsoln=−ΔHlattice+ΔHhyd\Delta H_{\text{soln}} = -\Delta H_{\text{lattice}} + \Delta H_{\text{hyd}} for both salts. (b) Explain why ΔHsoln\Delta H_{\text{soln}} alone cannot explain why KF\text{KF} is vastly more soluble (102 g/100 mL H2O102\text{ g}/100\text{ mL}\text{ H}_2\text{O} at 20∘C20^\circ\text{C}) than NaF\text{NaF} (4.13 g/100 mL H2O4.13\text{ g}/100\text{ mL}\text{ H}_2\text{O}), citing the thermodynamic interplay between the lattice model and ion-dipole hydration entropy (ΔSsoln\Delta S_{\text{soln}}).

Answer and steps

Final answer

(a) ΔHsoln(NaF)=−(−923 kJ/mol)+(−924 kJ/mol)=−1.0 kJ/mol\Delta H_{\text{soln}}(\text{NaF}) = -(-923\text{ kJ/mol}) + (-924\text{ kJ/mol}) = -1.0\text{ kJ/mol}; ΔHsoln(KF)=−(−821 kJ/mol)+(−838 kJ/mol)=−17.0 kJ/mol\Delta H_{\text{soln}}(\text{KF}) = -(-821\text{ kJ/mol}) + (-838\text{ kJ/mol}) = -17.0\text{ kJ/mol}. (b) The small, high-charge-density Na+\text{Na}^+ ion imposes strict local ordering on coordinating water molecules, resulting in an unfavorable negative entropy of solution (ΔSsoln<0\Delta S_{\text{soln}} < 0). In contrast, the larger K+\text{K}^+ ion has lower charge density, ordering solvent water far less, yielding a more favorable entropy of dissolution and driving ΔGsoln=ΔHsoln−TΔSsoln\Delta G_{\text{soln}} = \Delta H_{\text{soln}} - T\Delta S_{\text{soln}} significantly more negative for KF\text{KF}.

Steps

Part (a): Calculating the Enthalpy of Solution (ΔHsoln\Delta H_{\text{soln}})

Dissolving an ionic crystal in water can be conceptualized as a two-step Born-Haber-type pathway:

  1. Lattice Dissociation: Energy required to separate the solid ionic lattice into gaseous ions, which equals −ΔHlattice-\Delta H_{\text{lattice}}.
  2. Ion Hydration: Energy released when gaseous ions are solvated by polar water molecules via ion-dipole interactions (ΔHhyd\Delta H_{\text{hyd}}).

The overall enthalpy of solution is given by: ΔHsoln=−ΔHlattice+ΔHhyd\Delta H_{\text{soln}} = -\Delta H_{\text{lattice}} + \Delta H_{\text{hyd}}

  • For Sodium Fluoride (NaF\ce{NaF}): ΔHsoln(NaF)=−(−923 kJ/mol)+(−924 kJ/mol)=923 kJ/mol−924 kJ/mol=−1.0 kJ/mol\Delta H_{\text{soln}}(\ce{NaF}) = -(-923\text{ kJ/mol}) + (-924\text{ kJ/mol}) = 923\text{ kJ/mol} - 924\text{ kJ/mol} = -1.0\text{ kJ/mol}
  • For Potassium Fluoride (KF\ce{KF}): ΔHsoln(KF)=−(−821 kJ/mol)+(−838 kJ/mol)=821 kJ/mol−838 kJ/mol=−17.0 kJ/mol\Delta H_{\text{soln}}(\ce{KF}) = -(-821\text{ kJ/mol}) + (-838\text{ kJ/mol}) = 821\text{ kJ/mol} - 838\text{ kJ/mol} = -17.0\text{ kJ/mol}

Part (b): Thermodynamic Interplay of Enthalpy and Hydration Entropy

While ΔHsoln\Delta H_{\text{soln}} is more exothermic for KF\ce{KF} (−17.0 kJ/mol-17.0\text{ kJ/mol}) than for NaF\ce{NaF} (−1.0 kJ/mol-1.0\text{ kJ/mol}), enthalpy alone does not account for the drastic, order-of-magnitude difference in their aqueous solubilities (102 g/100 mL102\text{ g}/100\text{ mL} for KF\ce{KF} vs. 4.13 g/100 mL4.13\text{ g}/100\text{ mL} for NaF\ce{NaF}).

Solubility is ultimately governed by the standard Gibbs free energy of solution: ΔGsoln=ΔHsoln−TΔSsoln\Delta G_{\text{soln}} = \Delta H_{\text{soln}} - T\Delta S_{\text{soln}} A process is spontaneous and thermodynamically favored at constant temperature and pressure when ΔGsoln<0\Delta G_{\text{soln}} < 0. The overall entropy change of solution (ΔSsoln\Delta S_{\text{soln}}) consists of two opposing factors:

  1. Disruption of the crystal lattice: Ions break free from fixed lattice positions to freely diffuse, increasing entropy (ΔSions>0\Delta S_{\text{ions}} > 0).
  2. Ordering of solvent molecules: Water dipoles orient themselves around the dissociated ions via ion-dipole attractions, decreasing the entropy of the water (ΔSsolvent<0\Delta S_{\text{solvent}} < 0).

The Effect of Ion Charge Density:

  • NaX+\ce{Na+} vs. KX+\ce{K+}: The sodium ion (NaX+\ce{Na+}, ionic radius ≈102 pm\approx 102\text{ pm}) is noticeably smaller than the potassium ion (KX+\ce{K+}, ionic radius ≈138 pm\approx 138\text{ pm}). Because both have a +1+1 charge, NaX+\ce{Na+} has a significantly higher charge density (charge/volume\text{charge}/\text{volume}).
  • Solvent Ordering for NaF\ce{NaF}: The high charge density of NaX+\ce{Na+} attracts and locks coordinating HX2O\ce{H2O} molecules into a rigid, highly structured primary hydration shell. This severe ordering of water creates a large negative contribution to entropy, leading to an unfavorable overall entropy of solution (ΔSsoln<0\Delta S_{\text{soln}} < 0). Consequently, the term −TΔSsoln-T\Delta S_{\text{soln}} is positive, opposing dissolution and making ΔGsoln\Delta G_{\text{soln}} much less negative (closer to zero).
  • Solvent Ordering for KF\ce{KF}: Because KX+\ce{K+} has a larger ionic radius and lower charge density, its electric field is more diffuse. It coordinates surrounding water molecules much more loosely, imposing far less ordering on the solvent. As a result, the gain in entropy from breaking the crystal lattice outweighs the modest solvent ordering, yielding a more favorable ΔSsoln\Delta S_{\text{soln}}.

Combining both a more negative enthalpy change (ΔHsoln\Delta H_{\text{soln}}) and a far more favorable entropy change (ΔSsoln\Delta S_{\text{soln}}) makes ΔGsoln\Delta G_{\text{soln}} substantially more negative for KF\ce{KF}, driving its dramatically higher solubility.

Key Pitfall: Avoid assuming that higher lattice energy alone guarantees lower solubility, or that dissolution is simply an enthalpy-driven process. The entropic penalty of water reorientation (hydration shell formation) around small cations with high charge densities often serves as the deciding factor in salt solubility.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to negate the lattice enthalpy in the formula ΔH_soln = -ΔH_lattice + ΔH_hyd, adding the negative lattice energy directly.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔHsoln(NaF)=ΔHlattice+ΔHhyd=−923+(−924)=−1847 kJ/mol\Delta H_{\text{soln}}(\text{NaF}) = \Delta H_{\text{lattice}} + \Delta H_{\text{hyd}} = -923 + (-924) = -1847\text{ kJ/mol}

    Correct

    ΔHsoln(NaF)=−ΔHlattice+ΔHhyd=−(−923 kJ/mol)+(−924 kJ/mol)=−1.0 kJ/mol\Delta H_{\text{soln}}(\text{NaF}) = -\Delta H_{\text{lattice}} + \Delta H_{\text{hyd}} = -(-923\text{ kJ/mol}) + (-924\text{ kJ/mol}) = -1.0\text{ kJ/mol}

    Dissolving an ionic crystal requires energy to separate the lattice into gaseous ions, which is an endothermic step (−ΔHlattice=+923 kJ/mol-\Delta H_{\text{lattice}} = +923\text{ kJ/mol}). By omitting the negative sign in front of ΔHlattice\Delta H_{\text{lattice}}, you treated lattice disruption as exothermic.

  2. Step 2

    ΔHsoln(KF)=ΔHlattice+ΔHhyd=−821+(−838)=−1659 kJ/mol\Delta H_{\text{soln}}(\text{KF}) = \Delta H_{\text{lattice}} + \Delta H_{\text{hyd}} = -821 + (-838) = -1659\text{ kJ/mol}

    Correct

    ΔHsoln(KF)=−ΔHlattice+ΔHhyd=−(−821 kJ/mol)+(−838 kJ/mol)=−17.0 kJ/mol\Delta H_{\text{soln}}(\text{KF}) = -\Delta H_{\text{lattice}} + \Delta H_{\text{hyd}} = -(-821\text{ kJ/mol}) + (-838\text{ kJ/mol}) = -17.0\text{ kJ/mol}

    Separating the KF\text{KF} crystal lattice requires inputting +821 kJ/mol+821\text{ kJ/mol} (−ΔHlattice-\Delta H_{\text{lattice}}). Adding ΔHlattice\Delta H_{\text{lattice}} directly produced an erroneously large exothermic value instead of −17.0 kJ/mol-17.0\text{ kJ/mol}.

  3. Step 3

    Solubility depends on ΔGsoln=ΔHsoln−TΔSsoln. Na+ has a smaller radius and higher charge density than K+, which tightly orders surrounding water molecules into a rigid hydration shell. This makes ΔSsoln for NaF significantly more negative, resulting in a less favorable ΔGsoln despite the calculated enthalpies.\text{Solubility depends on } \Delta G_{\text{soln}} = \Delta H_{\text{soln}} - T\Delta S_{\text{soln}}.\text{ } \text{Na}^+ \text{ has a smaller radius and higher charge density than } \text{K}^+, \text{ which tightly orders surrounding water molecules into a rigid hydration shell. This makes } \Delta S_{\text{soln}} \text{ for NaF significantly more negative, resulting in a less favorable } \Delta G_{\text{soln}} \text{ despite the calculated enthalpies.}

WHAT YOU DID WELL
Compliments from Your Teacher

You identified that solubility is governed by the Gibbs free energy of solution, ΔGsoln=ΔHsoln−TΔSsoln\Delta G_{\text{soln}} = \Delta H_{\text{soln}} - T\Delta S_{\text{soln}}.

You correctly related cation radius and charge density to the degree of water molecule ordering in the hydration shell.

You correctly concluded that the substantial negative entropy change for sodium ion hydration counteracts dissolution spontaneity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Enthalpy Cycle

You forgot to negate the given lattice enthalpy when calculating ΔHsoln\Delta H_{\text{soln}}, adding two negative numbers instead of subtracting them.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sign convention of lattice energy (which is given as an exothermic formation value from gaseous ions) with the endothermic process of lattice dissociation required during dissolution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Lattice Dissociation vs. Formation
  • Lattice formation from gas-phase ions is exothermic (ΔHlattice<0\Delta H_{\text{lattice}} < 0), so breaking the solid lattice into gas ions requires an input of energy (ΔHdissoc=−ΔHlattice>0\Delta H_{\text{dissoc}} = -\Delta H_{\text{lattice}} > 0).

  • Always verify that your lattice dissociation step is positive (endothermic) before adding the exothermic hydration enthalpy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the dissolution thermodynamic cycle: ΔHsoln=−ΔHlattice+ΔHhyd\Delta H_{\text{soln}} = -\Delta H_{\text{lattice}} + \Delta H_{\text{hyd}}.

  2. Calculate for NaF\text{NaF}: ΔHsoln(NaF)=−(−923 kJ/mol)+(−924 kJ/mol)=+923−924=−1.0 kJ/mol\Delta H_{\text{soln}}(\text{NaF}) = -(-923\text{ kJ/mol}) + (-924\text{ kJ/mol}) = +923 - 924 = -1.0\text{ kJ/mol}.

  3. Calculate for KF\text{KF}: ΔHsoln(KF)=−(−821 kJ/mol)+(−838 kJ/mol)=+821−838=−17.0 kJ/mol\Delta H_{\text{soln}}(\text{KF}) = -(-821\text{ kJ/mol}) + (-838\text{ kJ/mol}) = +821 - 838 = -17.0\text{ kJ/mol}.

Final answer

(a) ΔHsoln(NaF)=−1.0 kJ/mol\Delta H_{\text{soln}}(\text{NaF}) = -1.0\text{ kJ/mol}; ΔHsoln(KF)=−17.0 kJ/mol\Delta H_{\text{soln}}(\text{KF}) = -17.0\text{ kJ/mol}. (b) The small, high-charge-density Na+\text{Na}^+ ion orders solvent water into a rigid hydration shell (ΔSsoln<0\Delta S_{\text{soln}} < 0), making ΔGsoln\Delta G_{\text{soln}} significantly less favorable for NaF\text{NaF} than for KF\text{KF}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Hess's Law cycles for dissolution, ensuring you explicitly write the lattice dissociation step as an endothermic process.

  • Double-check that the calculated ΔHsoln\Delta H_{\text{soln}} of simple soluble salts is typically modest (usually within ±50 kJ/mol\pm 50\text{ kJ/mol}), which helps catch values like −1800 kJ/mol-1800\text{ kJ/mol} as unreasonable.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets entropy of solution, claiming that dissolving any crystal lattice must always increase entropy and attributing the lower solubility of NaF to an unfavorable positive entropy of solution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔHsoln(NaF)=−(−923)+(−924)=923−924=−1 kJ/mol  ⟹  ΔHsoln(KF)=−(−821)+(−838)=821−838=−17 kJ/mol\Delta H_{\text{soln}}(\text{NaF}) = -(-923) + (-924) = 923 - 924 = -1\text{ kJ/mol} \implies \Delta H_{\text{soln}}(\text{KF}) = -(-821) + (-838) = 821 - 838 = -17\text{ kJ/mol}

  2. Step 2

    Solubility depends on ΔGsoln=ΔHsoln−TΔSsoln  ⟹  Dissolving a solid crystal into aqueous ions always increases disorder, so ΔSsoln must always be positive for both salts.\text{Solubility depends on } \Delta G_{\text{soln}} = \Delta H_{\text{soln}} - T\Delta S_{\text{soln}} \implies \text{Dissolving a solid crystal into aqueous ions always increases disorder, so } \Delta S_{\text{soln}} \text{ must always be positive for both salts.}

    Correct

    ΔSsoln=ΔSlattice breakdown+ΔShydration\Delta S_{\text{soln}} = \Delta S_{\text{lattice breakdown}} + \Delta S_{\text{hydration}}, where solvent water molecules orient around ions (ΔShydration<0\Delta S_{\text{hydration}} < 0). For small, high-charge-density ions like Na+\text{Na}^+, the ordering of water can outweigh lattice disruption, making ΔSsoln<0\Delta S_{\text{soln}} < 0.

    While breaking down the crystal lattice increases entropy (ΔSions>0\Delta S_{\text{ions}} > 0), ion-dipole hydration forces water molecules into rigid, ordered hydration shells (ΔSwater<0\Delta S_{\text{water}} < 0). Therefore, ΔSsoln\Delta S_{\text{soln}} is not always positive.

  3. Step 3

    KF is more soluble simply because its ΔSsoln is a larger positive value due to breaking its weaker lattice, ignoring water ordering.\text{KF is more soluble simply because its } \Delta S_{\text{soln}} \text{ is a larger positive value due to breaking its weaker lattice, ignoring water ordering.}

    Correct

    Na+\text{Na}^+ has a smaller ionic radius and higher charge density than K+\text{K}^+, inducing severe local ordering of coordinating water molecules that yields an unfavorable ΔSsoln<0\Delta S_{\text{soln}} < 0. In contrast, the larger K+\text{K}^+ ion has a lower charge density and disrupts solvent structure far less, giving a more favorable ΔSsoln\Delta S_{\text{soln}} that makes ΔGsoln\Delta G_{\text{soln}} significantly more negative for KF\text{KF}.

    Ignoring water reorientation overlooks the primary thermodynamic barrier for NaF\text{NaF}. The much higher charge density of Na+\text{Na}^+ locks water dipoles into a structured shell, causing a severe entropic penalty (ΔSsoln<0\Delta S_{\text{soln}} < 0) that significantly dampens its solubility.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the enthalpy of solution for both NaF\text{NaF} and KF\text{KF} using the Born-Haber cycle relationship.

You correctly recognized that solubility is governed by the Gibbs free energy of solution, ΔGsoln=ΔHsoln−TΔSsoln\Delta G_{\text{soln}} = \Delta H_{\text{soln}} - T\Delta S_{\text{soln}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting solvent hydration entropy and ion charge density

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated dissolution as solely a solute-lattice disruption process, overlooking the substantial decrease in solvent entropy that occurs when high-charge-density ions organize surrounding polar water molecules into structured hydration shells.

REASONING PATH
Your ACEpath teacher’s suggested approach
Two-component nature of solution entropy
  • ΔSsoln=ΔSions (lattice breakdown)+ΔSsolvent (hydration)\Delta S_{\text{soln}} = \Delta S_{\text{ions (lattice breakdown)}} + \Delta S_{\text{solvent (hydration)}}

  • Always evaluate both the gain in disorder from dispersing the lattice ions and the loss in disorder from immobilizing water molecules around hydrated ions.

Charge density and water ordering
  • Charge Density∝zr\text{Charge Density} \propto \frac{z}{r}

  • Check the ionic radius of the cation: smaller ions with high charge density (e.g., Na+\text{Na}^+ vs. K+\text{K}^+, or Mg2+\text{Mg}^{2+} vs. Ca2+\text{Ca}^{2+}) exert intense electric fields that tightly lock coordinating water molecules into ordered shells, making ΔShydration\Delta S_{\text{hydration}} significantly more negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that the overall entropy change upon dissolution involves two opposing contributions: ΔSsoln=ΔSlattice+ΔShydration\Delta S_{\text{soln}} = \Delta S_{\text{lattice}} + \Delta S_{\text{hydration}}. While ΔSlattice>0\Delta S_{\text{lattice}} > 0, forming ion-dipole interactions forces coordinating water molecules into a highly ordered hydration cage, so ΔShydration<0\Delta S_{\text{hydration}} < 0.

  2. Compare the charge densities of Na+\text{Na}^+ and K+\text{K}^+: Na+\text{Na}^+ (r≈102 pmr \approx 102\text{ pm}) is significantly smaller than K+\text{K}^+ (r≈138 pmr \approx 138\text{ pm}). Thus, Na+\text{Na}^+ has a much higher charge density and binds water molecules far more rigidly into primary hydration shells.

  3. Assess the overall free energy: for NaF\text{NaF}, the entropic penalty of water ordering causes ΔSsoln<0\Delta S_{\text{soln}} < 0, making −TΔSsoln>0-T\Delta S_{\text{soln}} > 0 and opposing dissolution. For KF\text{KF}, the diffuse charge on K+\text{K}^+ orders water much less, yielding a more favorable ΔSsoln\Delta S_{\text{soln}} and a significantly more negative ΔGsoln=ΔHsoln−TΔSsoln\Delta G_{\text{soln}} = \Delta H_{\text{soln}} - T\Delta S_{\text{soln}}.

Final answer

KF\text{KF} is vastly more soluble than NaF\text{NaF} because the high charge density of Na+\text{Na}^+ severely orders surrounding water molecules into a rigid hydration shell, resulting in an unfavorable negative entropy of solution (ΔSsoln<0\Delta S_{\text{soln}} < 0). In contrast, the larger K+\text{K}^+ ion has a lower charge density and orders solvent water far less, resulting in a favorable ΔSsoln\Delta S_{\text{soln}} that, together with a more exothermic ΔHsoln\Delta H_{\text{soln}}, drives ΔGsoln\Delta G_{\text{soln}} much more negative for KF\text{KF}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how ion charge density affects the rigidity and size of primary and secondary hydration shells.

  • Practice identifying salts that have negative overall entropies of solution due to polyvalent or small cations (such as MgSO4\text{MgSO}_4 or LiF\text{LiF}).

  • Solve problems analyzing ΔGsoln\Delta G_{\text{soln}} curves across temperature to observe enthalpy-driven versus entropy-driven dissolutions.

Lock it in

Similar question

01

Calculate the enthalpy of solution (ΔHsoln\Delta H_{\text{soln}}) of lithium chloride (LiCl\text{LiCl}), given that its lattice formation enthalpy is ΔHlattice=−853 kJ/mol\Delta H_{\text{lattice}} = -853\text{ kJ/mol} and the total hydration enthalpy of its gaseous ions is ΔHhyd=−890 kJ/mol\Delta H_{\text{hyd}} = -890\text{ kJ/mol}.

Answer

ΔHsoln=−37 kJ/mol\Delta H_{\text{soln}} = -37\text{ kJ/mol}. Dissociation of the lattice requires +853 kJ/mol+853\text{ kJ/mol} (−ΔHlattice-\Delta H_{\text{lattice}}), and hydration releases −890 kJ/mol-890\text{ kJ/mol}: ΔHsoln=−(−853)+(−890)=853−890=−37 kJ/mol\Delta H_{\text{soln}} = -(-853) + (-890) = 853 - 890 = -37\text{ kJ/mol}.

02

Magnesium fluoride (MgF2\text{MgF}_2) has ΔHlattice=−2957 kJ/mol\Delta H_{\text{lattice}} = -2957\text{ kJ/mol} and ΔHhyd=−2939 kJ/mol\Delta H_{\text{hyd}} = -2939\text{ kJ/mol}. (a) Calculate ΔHsoln\Delta H_{\text{soln}}. (b) Despite having an endothermic ΔHsoln\Delta H_{\text{soln}} of only +18 kJ/mol+18\text{ kJ/mol}, MgF2\text{MgF}_2 is virtually insoluble in water. Explain this insolubility using hydration entropy.

Answer

(a) ΔHsoln=−(−2957)+(−2939)=+18 kJ/mol\Delta H_{\text{soln}} = -(-2957) + (-2939) = +18\text{ kJ/mol}. (b) The small divalent Mg2+\text{Mg}^{2+} ion has an extremely high charge density, which strongly locks multiple hydration shells of water molecules into an ordered structure. This causes a heavily negative entropy change (ΔSsoln≪0\Delta S_{\text{soln}} \ll 0), making −TΔSsoln-T\Delta S_{\text{soln}} large and positive, resulting in a positive, non-spontaneous ΔGsoln\Delta G_{\text{soln}}.

03

For sodium chloride (NaCl\text{NaCl}), ΔHsoln=+3.9 kJ/mol\Delta H_{\text{soln}} = +3.9\text{ kJ/mol}, yet it readily dissolves at 298 K298\text{ K} with ΔGsoln∘=−9.0 kJ/mol\Delta G^\circ_{\text{soln}} = -9.0\text{ kJ/mol}. (a) Calculate ΔSsoln∘\Delta S^\circ_{\text{soln}} in J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K}). (b) Why is ΔSsoln∘\Delta S^\circ_{\text{soln}} positive for NaCl\text{NaCl} but negative for salts with high-charge-density cations like Mg2+\text{Mg}^{2+}?

Answer

(a) ΔSsoln∘=+43.3 J/(mol⋅K)\Delta S^\circ_{\text{soln}} = +43.3\text{ J}/(\text{mol}\cdot\text{K}). Using ΔG=ΔH−TΔS\Delta G = \Delta H - T\Delta S: −9.0 kJ/mol=3.9 kJ/mol−(298 K)ΔS-9.0\text{ kJ/mol} = 3.9\text{ kJ/mol} - (298\text{ K})\Delta S, so ΔS=(3.9−(−9.0))/298=12.9/298 kJ/(mol⋅K)=+0.0433 kJ/(mol⋅K)\Delta S = (3.9 - (-9.0))/298 = 12.9/298\text{ kJ}/(\text{mol}\cdot\text{K}) = +0.0433\text{ kJ}/(\text{mol}\cdot\text{K}). (b) Na+\text{Na}^+ and Cl−\text{Cl}^- have moderate to low charge densities, so the entropy gained from disrupting the rigid 3D crystal lattice exceeds the moderate loss of entropy from solvent ordering. For high-charge-density ions like Mg2+\text{Mg}^{2+}, intense local electrostatic fields immobilize surrounding water molecules, dominating and driving ΔSsoln\Delta S_{\text{soln}} negative.

Loading workspace…