Resources

Consider an acyclic, unbranched hydrocarbon chain bearing two substituent groups: a bromo group at one position and a methyl group at another, having the molecular formula C6H13Br\text{C}_6\text{H}_{13}\text{Br}. In the specific constitution CH3CH(CH3)CH2CH(Br)CH3\text{CH}_3\text{CH}(\text{CH}_3)\text{CH}_2\text{CH}(\text{Br})\text{CH}_3, numbering from left-to-right produces the locant set (2,4)(2, 4), while numbering from right-to-left produces the locant set (2,4)(2, 4). State the governing IUPAC tie-breaker rule that applies at this symmetry boundary, identify the correct locant assignment for each substituent, and write the complete systematic IUPAC name.

Answer and steps

Final answer

Governing rule: When numbering gives identical locant sets at the first point of difference ((2,4)(2, 4) vs. (2,4)(2, 4)), lower locants are assigned to substituents in alphabetical order (bromo precedes methyl); IUPAC name: 2-bromo−4-methylpentane2\text{-bromo}-4\text{-methylpentane}

Steps

01

Identify the Principal Chain

To determine the correct IUPAC name for CHX3CH(CHX3)CHX2CH(Br)CHX3\ce{CH3CH(CH3)CH2CH(Br)CH3}, follow the systematic nomenclature rules step by step:

The longest continuous carbon chain consists of 55 carbon atoms. The parent alkane is therefore pentane.

02

Compare Numbering Directions and Locant Sets

The chain contains two substituents: a bromo group (−Br\ce{-Br}) and a methyl group (−CHX3\ce{-CH3}).

  • Numbering from left to right:

    • CX1\ce{C1}: CHX3\ce{CH3}
    • CX2\ce{C2}: bears the methyl group (−CHX3\ce{-CH3})
    • CX3\ce{C3}: CHX2\ce{CH2}
    • CX4\ce{C4}: bears the bromo group (−Br\ce{-Br})
    • CX5\ce{C5}: CHX3\ce{CH3}
    • Locant set: (2,4)(2, 4)
  • Numbering from right to left:

    • CX1\ce{C1}: CHX3\ce{CH3}
    • CX2\ce{C2}: bears the bromo group (−Br\ce{-Br})
    • CX3\ce{C3}: CHX2\ce{CH2}
    • CX4\ce{C4}: bears the methyl group (−CHX3\ce{-CH3})
    • CX5\ce{C5}: CHX3\ce{CH3}
    • Locant set: (2,4)(2, 4)

Both numbering directions yield the exact same numerical locant set, (2,4)(2, 4), meaning the lowest locant rule cannot break the tie.

03

Apply the Alphabetical Tie-Breaker Rule

According to IUPAC rule P-14.4, when numbering from either end of a chain yields identical locant sets at the first point of difference, the lower locant is assigned to the substituent that appears first in alphabetical order.

  • Comparing substituent names: "bromo" vs. "methyl".
  • Since b precedes m in the alphabet, the bromo group must receive the lower numerical locant (22), and the methyl group receives the higher locant (44).

Common Pitfall: Do not confuse alphabetical order for substituent citation in the name with numbering priority. Alphabetical priority in numbering is used only as a tie-breaker when numerical locant sets are entirely identical; it never overrides the rule of lowest locant set.

04

Assemble the Complete IUPAC Name

  • Substituents are cited alphabetically with their respective locants separated by hyphens: 2-bromo\text{2-bromo} and 4-methyl\text{4-methyl}.
  • Combine substituents with the parent alkane name: 2-bromo-4-methylpentane.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student incorrectly uses molecular mass or atomic number as the tie-breaker instead of alphabetical order, or numbers from left to right as written.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    When locant sets are identical (2,4)(2,4), number from left to right following the structural formula.

    Correct

    When locant sets are identical at the first point of difference, assign the lower locant to the substituent that comes first in alphabetical order.

    Chemical structures have no inherent left-to-right reading direction. Under IUPAC rule P-14.4, when numbering from both directions yields the identical locant set, alphabetical priority serves as the tie-breaker.

  2. Step 2

    Methyl is at C2\text{C2} and bromo is at C4\text{C4}.

    Correct

    Bromo is at C2\text{C2} and methyl is at C4\text{C4}.

    Because "bromo" precedes "methyl" alphabetically, the bromo group receives the lower locant (22) and the methyl group receives locant 44.

  3. Step 3

    4-bromo-2-methylpentane

    Correct

    2-bromo-4-methylpentane

    Combining the correct locants with alphabetical citation of substituents gives 2-bromo-4-methylpentane\text{2-bromo-4-methylpentane}.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified that the principal chain contains 5 carbons (pentane).

You determined that both numbering directions produce the same numerical locant set, (2,4)(2, 4).

You correctly cited "bromo" before "methyl" in alphabetical order when writing the final compound name.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
arbitrary_reading_direction_tiebreaker

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the written left-to-right order of the chemical formula as a structural rule rather than applying IUPAC's alphabetical tie-breaker for identical locant sets.

REASONING PATH
Your ACEpath teacher’s suggested approach
Alphabetical Tie-Breaker Rule
  • When numbering from both ends gives identical locant sets at the first point of difference, give the lower number to the substituent cited first alphabetically.

  • Compare the substituent names: "bromo" starts with 'b' and "methyl" starts with 'm'. Give 22 to bromo and 44 to methyl.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare substituents alphabetically: "bromo" precedes "methyl".

  2. Assign the lower number (22) to the bromo substituent and the higher number (44) to the methyl substituent.

  3. Combine the substituents with the parent chain name pentane\text{pentane}.

Final answer

Governing rule: lower locants are assigned to substituents in alphabetical order; IUPAC name: 2-bromo-4-methylpentane\text{2-bromo-4-methylpentane}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that molecules can be flipped horizontally; never use left-to-right orientation to break a numbering tie.

  • Use alphabetical comparison only as a tie-breaker when numerical locant sets are completely identical.

OverviewACEpath Teacher's Diagnosis

02 The student correctly assigns locants based on alphabetical priority but arranges the substituent prefixes in the final name by numerical locant order rather than alphabetically.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    When numbering gives the same locants from both directions, the lower locant is given to the substituent that comes first alphabetically.

  2. Step 2

    Bromo is at 2 and methyl is at 4. ⟹ Longest chain is 5 carbons : pentane

  3. Step 3

    4-methyl-2-bromopentane\text{4-methyl-2-bromopentane}

    Correct

    2-bromo-4-methylpentane\text{2-bromo-4-methylpentane}

    Substituent prefixes must always be arranged alphabetically in the final IUPAC name, regardless of where they appear along the chain or formula. Since "bromo" starts with "b" and "methyl" starts with "m", "bromo" must be cited before "methyl".

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the IUPAC alphabetical tie-breaker rule for identical locant sets.

You correctly assigned position 2 to bromo and position 4 to methyl.

You correctly identified the 5-carbon parent chain as pentane.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Alphabetical prefix ordering

You knew that bromo precedes methyl alphabetically when breaking numbering ties, but you did not maintain that alphabetical order when writing the prefixes in the final name.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to apply alphabetical ordering as the universal rule for arranging substituent prefixes in the final IUPAC name, instead copying the left-to-right order from the condensed structural formula.

REASONING PATH
Your ACEpath teacher’s suggested approach
Substituent prefix ordering
  • Substituents must always be cited alphabetically in the name (ignoring multiplicative prefixes like di-, tri-, unless part of a complex substituent name).

  • Always list prefixes alphabetically: compare the first letters of the base substituent names ("b" in bromo vs. "m" in methyl) before assembling the name.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the substituent names alphabetically: "bromo" precedes "methyl".

  2. Write each substituent with its assigned locant separated by hyphens: "2-bromo" and "4-methyl".

  3. Combine the prefixes alphabetically with the parent chain name without spaces between the last prefix and parent: "2-bromo-4-methylpentane".

Final answer

2-bromo-4-methylpentane\text{2-bromo-4-methylpentane}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the convention that substituent citation in the final name is strictly alphabetical.

  • Practice naming branched alkanes with mixed halo/alkyl substituents by writing out the sorted prefix list before appending the parent alkane.

Lock it in

Similar question

01

Name the compound CHX3CH(Cl)CHX2CH(CHX3)CHX3\ce{CH3CH(Cl)CH2CH(CH3)CH3} using systematic IUPAC nomenclature.

Answer

2-chloro-4-methylpentane\text{2-chloro-4-methylpentane}. Numbering from left gives (2,4)(2, 4) and from right gives (2,4)(2, 4). Because "chloro" precedes "methyl" alphabetically, the chloro group receives locant 22.

02

Determine the correct IUPAC name for CHX3CHX2CH(CHX2CHX3)CHX2CH(CHX3)CHX2CHX3\ce{CH3CH2CH(CH2CH3)CH2CH(CH3)CH2CH3}.

Answer

3-ethyl-5-methylheptane\text{3-ethyl-5-methylheptane}. The longest chain has 7 carbons (heptane). Numbering from either end yields substituents at positions 33 and 55. Because "ethyl" precedes "methyl" alphabetically, ethyl receives locant 33 and methyl receives locant 55.

03

Provide the systematic IUPAC name for CHX3CH(Br)CH(CHX3)CH(CHX3)CH(Cl)CHX3\ce{CH3CH(Br)CH(CH3)CH(CH3)CH(Cl)CH3}.

Answer

2-bromo-5-chloro-3,4-dimethylhexane\text{2-bromo-5-chloro-3,4-dimethylhexane}. The main chain has 6 carbons. Numbering left-to-right gives locants (2,3,4,5)(2, 3, 4, 5) and right-to-left also gives (2,3,4,5)(2, 3, 4, 5). Comparing substituents at equivalent positions: position 2 has bromo vs. chloro. Since "bromo" precedes "chloro" alphabetically, the bromo-bearing carbon is C2\text{C2}.

Loading workspace…