Resources

In a spectrophotometric trace analysis, absorbance is measured as A=−log⁡10(T)A = -\log_{10}(T), where T=II0T = \frac{I}{I_0} is the fractional transmittance. Using error propagation, the relative uncertainty in concentration is δcc=δAA=0.4343 δTTln⁡(1/T)\frac{\delta c}{c} = \frac{\delta A}{A} = \frac{0.4343\,\delta T}{T \ln(1/T)}. As the analyte solution approaches infinite dilution (c→0c \to 0, such that T→1.000T \to 1.000), evaluate the limiting behavior of the relative uncertainty δcc\frac{\delta c}{c} if the instrumental noise of the photodetector is constant at δT=0.005\delta T = 0.005.

Answer and steps

Final answer

As T→1T \to 1, ln⁡(1/T)→0\ln(1/T) \to 0, causing δcc→∞\frac{\delta c}{c} \to \infty; at infinite dilution, the relative uncertainty becomes asymptotically unbounded.

Steps

01

Identify the Given Error Propagation Expression

According to the Beer–Lambert law, absorbance AA is directly proportional to concentration cc (A=εbcA = \varepsilon b c). Consequently, the relative uncertainty in concentration equals the relative uncertainty in absorbance:

δcc=δAA=0.4343 δTTln⁡(1/T)\frac{\delta c}{c} = \frac{\delta A}{A} = \frac{0.4343\,\delta T}{T \ln(1/T)}

Here, the constant 0.4343≈1ln⁡100.4343 \approx \frac{1}{\ln 10} originates from converting between natural logarithms and base-10 logarithms, and δT=0.005\delta T = 0.005 represents constant photodetector noise (uncertainty in transmittance).


02

Analyze the Limiting Values as c→0c \to 0 (T→1.000T \to 1.000)

As the solution approaches infinite dilution:

  • The measured transmittance approaches unity: lim⁡c→0T=1.000\lim_{c \to 0} T = 1.000
  • The reciprocal transmittance approaches 11: lim⁡T→11T=1\lim_{T \to 1} \frac{1}{T} = 1
  • The logarithmic term in the denominator approaches zero: lim⁡T→1ln⁡(1T)=ln⁡(1)=0\lim_{T \to 1} \ln\left(\frac{1}{T}\right) = \ln(1) = 0

03

Evaluate the Limit of the Relative Uncertainty

Substitute the constant detector uncertainty δT=0.005\delta T = 0.005 into the expression and evaluate the behavior of the quotient:

  • Numerator: 0.4343⋅δT=0.4343⋅0.005≈2.17×10−30.4343 \cdot \delta T = 0.4343 \cdot 0.005 \approx 2.17 \times 10^{-3} (a non-zero positive constant).
  • Denominator: Tln⁡(1/T)→1⋅0=0+T \ln(1/T) \to 1 \cdot 0 = 0^+.

Taking the limit as TT approaches 11 from below (T→1−T \to 1^-):

lim⁡T→1−δcc=lim⁡T→1−0.4343 δTTln⁡(1/T)=constant0+→∞\lim_{T \to 1^-} \frac{\delta c}{c} = \lim_{T \to 1^-} \frac{0.4343\,\delta T}{T \ln(1/T)} = \frac{\text{constant}}{0^+} \to \infty


04

Physical Interpretation and Measurement Pitfall

  • Physical Insight: At trace concentrations approaching infinite dilution, virtually all light passes through unattenuated (I≈I0I \approx I_0). The signal measured is the extremely tiny difference between I0I_0 and II. Because the detector has a fixed absolute baseline noise (δT\delta T), this noise completely overwhelms the minuscule absorbance signal, causing the relative error in determining cc to diverge to infinity.
  • Practical Implication: Reliable spectrophotometric measurements cannot be made at extremely high transmittances (T→1T \to 1) or extremely low transmittances (T→0T \to 0). The relative error follows a U-shaped curve (the photometric error curve), with minimum error typically occurring around T≈0.368T \approx 0.368 (A≈0.434A \approx 0.434).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the relative uncertainty with the absolute uncertainty or assumes that maximum transmittance means zero uncertainty.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    As c→0, T→1.000  ⟹  ln⁡(1T)=ln⁡(1)=0\text{As } c \to 0,\, T \to 1.000 \implies \ln\left(\frac{1}{T}\right) = \ln(1) = 0

  2. Step 2

    δcc=(0.4343⋅0.005)⋅0=0\frac{\delta c}{c} = (0.4343 \cdot 0.005) \cdot 0 = 0

    Correct

    lim⁡T→1−δcc=lim⁡T→1−0.4343⋅0.005Tln⁡(1/T)=2.1715×10−31⋅0+→∞\lim_{T \to 1^-} \frac{\delta c}{c} = \lim_{T \to 1^-} \frac{0.4343 \cdot 0.005}{T \ln(1/T)} = \frac{2.1715 \times 10^{-3}}{1 \cdot 0^+} \to \infty

    The term Tln⁡(1/T)T \ln(1/T) appears in the denominator of the error propagation formula, not the numerator. Dividing a positive non-zero numerator by a quantity approaching 0+0^+ makes the quotient approach infinity rather than zero.

  3. Step 3

    δcc→0\frac{\delta c}{c} \to 0

    Correct

    δcc→∞\frac{\delta c}{c} \to \infty

    Because of the algebra mistake in the previous step where you multiplied instead of dividing by zero, your final limit diverged from the correct unbounded behavior.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the transmittance TT approaches 1.0001.000 as the solution reaches infinite dilution.

You evaluated the limit of ln⁡(1/T)\ln(1/T) as ln⁡(1)=0\ln(1) = 0 without error.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic substitution / Inverting numerator and denominator

You treated the denominator term Tln⁡(1/T)T \ln(1/T) as a multiplying factor in the numerator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Placing a vanishing denominator into multiplication rather than division led to evaluating constant×0=0\text{constant} \times 0 = 0 instead of constant0+→∞\frac{\text{constant}}{0^+} \to \infty. Physically, at near-zero concentration, a tiny constant noise on a near-zero absorbance signal creates an infinitely large relative error.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inspect Fraction Structure
  • In δcc=k⋅δTTln⁡(1/T)\frac{\delta c}{c} = \frac{k \cdot \delta T}{T \ln(1/T)}, the term Tln⁡(1/T)T \ln(1/T) is strictly in the denominator.

  • Keep the numerator and denominator clearly separated when evaluating limits: lim⁡ND=lim⁡Nlim⁡D\lim \frac{N}{D} = \frac{\lim N}{\lim D}.

Physical Sense-Check for Trace Analysis
  • At infinite dilution, absorbance A→0A \to 0. Relative uncertainty δAA\frac{\delta A}{A} must blow up because you are dividing random baseline noise by an imperceptible signal.

  • Confirm that relative measurement error increases, rather than vanishes, when measuring near the detection limit of an instrument.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the quotient with explicit numerator and denominator: δcc=0.4343⋅0.005Tln⁡(1/T)\frac{\delta c}{c} = \frac{0.4343 \cdot 0.005}{T \ln(1/T)}.

  2. Evaluate the numerator: 0.4343⋅0.005=2.1715×10−30.4343 \cdot 0.005 = 2.1715 \times 10^{-3} (a positive constant).

  3. Evaluate the denominator as T→1−T \to 1^-: Tln⁡(1/T)→1⋅ln⁡(1)=0+T \ln(1/T) \to 1 \cdot \ln(1) = 0^+.

  4. Take the limit of the quotient: lim⁡T→1−2.1715×10−30+=+∞\lim_{T \to 1^-} \frac{2.1715 \times 10^{-3}}{0^+} = +\infty.

Final answer

As T→1T \to 1, ln⁡(1/T)→0\ln(1/T) \to 0, causing δcc→∞\frac{\delta c}{c} \to \infty; at infinite dilution, the relative uncertainty becomes asymptotically unbounded.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to take limits of rational algebraic expressions when the denominator approaches zero while the numerator remains non-zero.

  • Practice sketching the photometric error curve δcc\frac{\delta c}{c} versus transmittance TT to build physical intuition for why relative error diverges at both T→0T \to 0 and T→1T \to 1.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets ln(1) as 1 instead of 0 when evaluating the logarithmic term at T = 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    As c→0, T→1.000\text{As } c \to 0,\, T \to 1.000

  2. Step 2

    ln⁡(1T)=ln⁡(11)=1\ln\left(\frac{1}{T}\right) = \ln\left(\frac{1}{1}\right) = 1

    Correct

    lim⁡T→1ln⁡(1T)=ln⁡(1)=0\lim_{T \to 1} \ln\left(\frac{1}{T}\right) = \ln(1) = 0

    You set ln⁡(1)=1\ln(1) = 1. The natural logarithm of 11 is 00 because e0=1e^0 = 1.

  3. Step 3

    δcc=0.4343⋅0.0051⋅1=0.00217  ⟹  δcc→0.00217\frac{\delta c}{c} = \frac{0.4343 \cdot 0.005}{1 \cdot 1} = 0.00217 \implies \frac{\delta c}{c} \to 0.00217

    Correct

    lim⁡T→1−δcc=lim⁡T→1−0.4343⋅0.005Tln⁡(1/T)=0.002170+→∞\lim_{T \to 1^-} \frac{\delta c}{c} = \lim_{T \to 1^-} \frac{0.4343 \cdot 0.005}{T \ln(1/T)} = \frac{0.00217}{0^+} \to \infty

    Because of the incorrect value for ln⁡(1)\ln(1), you divided by 11 instead of a denominator approaching zero from above, missing the asymptotic divergence to infinity.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that approaching infinite dilution means the transmittance TT approaches 1.0001.000.

You correctly substituted the detector noise δT=0.005\delta T = 0.005 into the numerator.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm evaluation at unity

You treated ln⁡(1)\ln(1) as 11 rather than 00.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the identity ln⁡(e)=1\ln(e) = 1 with ln⁡(1)=0\ln(1) = 0, which prevented you from recognizing that the denominator of the relative uncertainty expression approaches zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Logarithmic Identity at Unity
  • For any base b>0b > 0 (b≠1b \neq 1), log⁡b(1)=0\log_b(1) = 0 because b0=1b^0 = 1. Specifically, ln⁡(1)=0\ln(1) = 0.

  • Whenever evaluating ln⁡(x)\ln(x) as x→1x \to 1, replace the logarithmic term with 00, not 11.

Limiting Quotient Behavior
  • If a quotient has a non-zero positive numerator and a denominator approaching 0+0^+, the limit approaches +∞+\infty.

  • Check the behavior of both numerator and denominator separately before concluding a limit is finite.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the logarithmic limit: lim⁡T→1ln⁡(1T)=ln⁡(1)=0\lim_{T \to 1} \ln\left(\frac{1}{T}\right) = \ln(1) = 0.

  2. Analyze the denominator product: lim⁡T→1−Tln⁡(1T)=1⋅0=0+\lim_{T \to 1^-} T \ln\left(\frac{1}{T}\right) = 1 \cdot 0 = 0^+.

  3. Evaluate the quotient limit with constant numerator: lim⁡T→1−0.4343⋅0.005Tln⁡(1/T)=2.17×10−30+=∞\lim_{T \to 1^-} \frac{0.4343 \cdot 0.005}{T \ln(1/T)} = \frac{2.17 \times 10^{-3}}{0^+} = \infty.

Final answer

As T→1T \to 1, ln⁡(1/T)→0\ln(1/T) \to 0, causing δcc→∞\frac{\delta c}{c} \to \infty; the relative uncertainty becomes asymptotically unbounded.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review basic logarithmic values, specifically noting that ln⁡(1)=0\ln(1) = 0 while ln⁡(e)=1\ln(e) = 1.

  • Practice identifying vertical asymptotes where the denominator approaches zero while the numerator stays constant.

  • Reflect on the physical meaning in spectroscopy: when almost all light transmits (T≈1T \approx 1), the tiny absorbed signal is drowned out by baseline detector noise.

Lock it in

Similar question

01

Using the same photometric error equation δcc=0.4343 δTTln⁡(1/T)\frac{\delta c}{c} = \frac{0.4343\,\delta T}{T \ln(1/T)} with constant noise δT=0.004\delta T = 0.004, evaluate the limiting behavior of δcc\frac{\delta c}{c} as an opaque, highly concentrated solution is approached (c→∞c \to \infty, so T→0+T \to 0^+).

Answer

As T→0+T \to 0^+, the denominator term behaves as lim⁡T→0+Tln⁡(1/T)=0\lim_{T \to 0^+} T \ln(1/T) = 0 (via L'Hôpital's rule). Since the numerator is a fixed constant 0.4343(0.004)=1.74×10−30.4343(0.004) = 1.74 \times 10^{-3}, the ratio δcc=1.74×10−30+→∞\frac{\delta c}{c} = \frac{1.74 \times 10^{-3}}{0^+} \to \infty. Thus, relative uncertainty also diverges to infinity at high concentrations.

02

A student measures an absorbance of A=0.0020A = 0.0020 with an absolute spectrophotometric uncertainty of δA=0.0040\delta A = 0.0040. Calculate the percent relative uncertainty in concentration, δcc×100%\frac{\delta c}{c} \times 100\%, and explain what this implies about the reliability of the measurement.

Answer

δcc=δAA=0.00400.0020=2.0\frac{\delta c}{c} = \frac{\delta A}{A} = \frac{0.0040}{0.0020} = 2.0, which corresponds to 200%200\% relative uncertainty. This implies the measurement is completely unreliable because the instrumental noise is twice as large as the analytical signal itself.

03

For the relative error function f(T)=1Tln⁡(1/T)f(T) = \frac{1}{T \ln(1/T)} where 0<T<10 < T < 1, find the exact transmittance TT that minimizes the relative concentration uncertainty, and state the corresponding optimal absorbance value AA.

Answer

Minimizing f(T)f(T) requires maximizing g(T)=Tln⁡(1/T)=−Tln⁡Tg(T) = T \ln(1/T) = -T \ln T. Taking the derivative: g′(T)=−ln⁡T−1=0  ⟹  ln⁡T=−1  ⟹  T=e−1≈0.368g'(T) = -\ln T - 1 = 0 \implies \ln T = -1 \implies T = e^{-1} \approx 0.368. The optimal absorbance is A=−log⁡10(e−1)=log⁡10(e)=0.4343A = -\log_{10}(e^{-1}) = \log_{10}(e) = 0.4343.

Loading workspace…