Resources

A volatile organic liquid is vaporized inside a piston cylinder at a constant external pressure of 780 mmHg780\text{ mmHg}. During this process, the volume of the system expands from 45.0 mL45.0\text{ mL} to 1.85 L1.85\text{ L}, while the liquid absorbs 2.45 kJ2.45\text{ kJ} of heat from an electrical heating plate. Express the expansion work ww in Joules (J\text{J}), and calculate the change in internal energy ΔU\Delta U of the substance in kilojoules (kJ\text{kJ}). (1 atm=760 mmHg=101,325 Pa1\text{ atm} = 760\text{ mmHg} = 101,325\text{ Pa}, 1 L=10−3 m31\text{ L} = 10^{-3}\text{ m}^3).

Answer and steps

Final answer

w=−188 Jw = -188\text{ J} (or −0.188 kJ-0.188\text{ kJ}) and ΔU=+2.26 kJ\Delta U = +2.26\text{ kJ}.

Steps

01

Identify the Thermodynamic Sign Conventions

In chemistry, the first law of thermodynamics is written as: ΔU=q+w\Delta U = q + w

  • Heat (qq): Energy transferred into the system from the surroundings is positive (q>0q > 0). Because the system absorbs heat from the heating plate: q=+2.45 kJq = +2.45\text{ kJ}
  • Work (ww): When a system expands against an external pressure, it does work on the surroundings, losing energy (w<0w < 0). Pressure-volume work at constant external pressure is defined as: w=−PextΔVw = -P_{\text{ext}}\Delta V

02

Calculate the Expansion Work (ww)

Convert all quantities to standard SI units:

  1. Change in volume (ΔV\Delta V): V1=45.0 mL=0.0450 LV_1 = 45.0\text{ mL} = 0.0450\text{ L} V2=1.85 LV_2 = 1.85\text{ L} ΔV=V2−V1=1.85 L−0.0450 L=1.805 L\Delta V = V_2 - V_1 = 1.85\text{ L} - 0.0450\text{ L} = 1.805\text{ L} ΔV=1.805×10−3 m3\Delta V = 1.805 \times 10^{-3}\text{ m}^3
  2. External pressure (PextP_{\text{ext}}): Pext=780 mmHg×101,325 Pa760 mmHg≈1.0399×105 PaP_{\text{ext}} = 780\text{ mmHg} \times \frac{101,325\text{ Pa}}{760\text{ mmHg}} \approx 1.0399 \times 10^5\text{ Pa}
  3. Calculate ww in Joules: w=−PextΔV=−(1.0399×105 Pa)(1.805×10−3 m3)≈−187.7 Jw = -P_{\text{ext}}\Delta V = -(1.0399 \times 10^5\text{ Pa})(1.805 \times 10^{-3}\text{ m}^3) \approx -187.7\text{ J}

Rounding to three significant figures gives: w=−188 J(or −0.188 kJ)w = -188\text{ J} \quad (\text{or } -0.188\text{ kJ})

Common Pitfall: Forgetting the negative sign in w=−PextΔVw = -P_{\text{ext}}\Delta V. An expanding system does work on the surroundings, which reduces the internal energy of the system.


03

Calculate the Change in Internal Energy (ΔU\Delta U)

Convert work into kilojoules so that units match heat (qq): w=−0.188 kJw = -0.188\text{ kJ}

Substitute qq and ww into the first law of thermodynamics: ΔU=q+w=2.45 kJ+(−0.188 kJ)=+2.262 kJ\Delta U = q + w = 2.45\text{ kJ} + (-0.188\text{ kJ}) = +2.262\text{ kJ}

Rounding to two decimal places (consistent with significant figures): ΔU=+2.26 kJ\Delta U = +2.26\text{ kJ}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the negative sign convention for expansion work done by the system on the surroundings, leading to a positive work value and an overestimated internal energy change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=780×101,325760=103,991 PaP = \frac{780 \times 101,325}{760} = 103,991\text{ Pa}

  2. Step 2

    ΔV=1.85−0.0450=1.805 L=1.805×10−3 m3\Delta V = 1.85 - 0.0450 = 1.805\text{ L} = 1.805 \times 10^{-3}\text{ m}^3

  3. Step 3

    w=PΔV=103,991×1.805×10−3=188 J  ⟹  w=0.188 kJw = P\Delta V = 103,991 \times 1.805 \times 10^{-3} = 188\text{ J} \implies w = 0.188\text{ kJ}

    Correct

    w=−PextΔV=−(103,991 Pa)(1.805×10−3 m3)=−188 J=−0.188 kJw = -P_{\text{ext}}\Delta V = -(103,991\text{ Pa})(1.805 \times 10^{-3}\text{ m}^3) = -188\text{ J} = -0.188\text{ kJ}

    In chemistry thermodynamics, pressure-volume work is defined as w=−PextΔVw = -P_{\text{ext}}\Delta V. When a system expands (ΔV>0\Delta V > 0), it pushes against the surroundings and expends energy, so the work done on the system must be negative (w=−188 Jw = -188\text{ J}).

  4. Step 4

    ΔU=q+w=2.45+0.188=+2.64 kJ\Delta U = q + w = 2.45 + 0.188 = +2.64\text{ kJ}

    Correct

    ΔU=q+w=+2.45 kJ+(−0.188 kJ)=+2.26 kJ\Delta U = q + w = +2.45\text{ kJ} + (-0.188\text{ kJ}) = +2.26\text{ kJ}

    You correctly used the first law relationship ΔU=q+w\Delta U = q + w, but substituting the positive work value from Step 3 caused your calculated internal energy change to be +2.64 kJ+2.64\text{ kJ} instead of +2.26 kJ+2.26\text{ kJ}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted external pressure from mmHg\text{mmHg} to Pa\text{Pa}.

You converted the initial volume from milliliters to liters and determined the correct change in volume in cubic meters.

You correctly applied the first law of thermodynamics, ΔU=q+w\Delta U = q + w, with consistent energy units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in pressure-volume work

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the magnitude definition of mechanical work (w=PΔVw = P\Delta V) instead of the thermodynamic sign convention (w=−PextΔVw = -P_{\text{ext}}\Delta V), overlooking that work done by the system on the surroundings represents an energy loss from the system's perspective.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Sign Convention for Work
  • w=−PextΔVw = -P_{\text{ext}}\Delta V. An expanding system (ΔV>0\Delta V > 0) loses energy to the surroundings, meaning w<0w < 0. A compressed system (ΔV<0\Delta V < 0) gains energy from work, meaning w>0w > 0.

  • Always verify whether the system is expanding or being compressed before writing down ww.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the thermodynamic formula with the negative sign: w=−PextΔV=−(103,991 Pa)(1.805×10−3 m3)=−187.7 J≈−188 Jw = -P_{\text{ext}}\Delta V = -(103,991\text{ Pa})(1.805 \times 10^{-3}\text{ m}^3) = -187.7\text{ J} \approx -188\text{ J}.

  2. Convert ww to kilojoules: w=−0.188 kJw = -0.188\text{ kJ}.

  3. Substitute q=+2.45 kJq = +2.45\text{ kJ} and w=−0.188 kJw = -0.188\text{ kJ} into ΔU=q+w\Delta U = q + w: ΔU=2.45 kJ+(−0.188 kJ)=+2.26 kJ\Delta U = 2.45\text{ kJ} + (-0.188\text{ kJ}) = +2.26\text{ kJ}.

Final answer

w=−188 Jw = -188\text{ J} (or −0.188 kJ-0.188\text{ kJ}) and ΔU=+2.26 kJ\Delta U = +2.26\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating PΔVP\Delta V work in chemistry, write w=−PextΔVw = -P_{\text{ext}}\Delta V explicitly to keep the negative sign intact.

  • Perform a physical reasonability check: if a gas expands, it must lose energy as work, so ww must be negative and should decrease ΔU\Delta U relative to qq.

OverviewACEpath Teacher's Diagnosis

02 The student fails to convert the units of work from Joules to kilojoules before adding it to heat, resulting in an incorrect internal energy change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=780×101,325760=103,991 PaP = \frac{780 \times 101,325}{760} = 103,991\text{ Pa}

  2. Step 2

    ΔV=1.85−0.0450=1.805 L=1.805×10−3 m3\Delta V = 1.85 - 0.0450 = 1.805\text{ L} = 1.805 \times 10^{-3}\text{ m}^3

  3. Step 3

    w=−PΔV=−103,991×1.805×10−3=−188 Jw = -P\Delta V = -103,991 \times 1.805 \times 10^{-3} = -188\text{ J}

  4. Step 4

    ΔU=q+w  ⟹  ΔU=2.45−188=−185.55 kJ\Delta U = q + w \implies \Delta U = 2.45 - 188 = -185.55\text{ kJ}

    Correct

    ΔU=q+w=2.45 kJ+(−0.188 kJ)=+2.26 kJ\Delta U = q + w = 2.45\text{ kJ} + (-0.188\text{ kJ}) = +2.26\text{ kJ}

    You substituted q=2.45 kJq = 2.45\text{ kJ} and w=−188 Jw = -188\text{ J} without matching their units. Because 1 kJ=1,000 J1\text{ kJ} = 1,000\text{ J}, you must convert ww to −0.188 kJ-0.188\text{ kJ} (or qq to 2,450 J2,450\text{ J}) before adding.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted pressure from mmHg\text{mmHg} to Pa\text{Pa} and volume from L\text{L} to m3\text{m}^3.

You correctly applied the thermodynamic sign convention for expansion work (w=−PextΔVw = -P_{\text{ext}}\Delta V).

You correctly identified the first law formula ΔU=q+w\Delta U = q + w.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Mismatch in First Law Addition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You combined energy quantities expressed in different metric prefixes (qq in kJ\text{kJ} and ww in J\text{J}) without harmonizing units before adding.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency Check
  • Quantities added together in ΔU=q+w\Delta U = q + w must share identical units (either both in J\text{J} or both in kJ\text{kJ}).

  • Always write the unit alongside each number in your substitution line: 2.45 kJ+(−0.188 kJ)2.45\text{ kJ} + (-0.188\text{ kJ}) or 2,450 J+(−188 J)2,450\text{ J} + (-188\text{ J}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the calculated work to kilojoules: w=−188 J1,000 J/kJ=−0.188 kJw = \frac{-188\text{ J}}{1,000\text{ J/kJ}} = -0.188\text{ kJ}.

  2. Substitute qq and ww with consistent units into the first law equation: ΔU=q+w=2.45 kJ+(−0.188 kJ)=+2.262 kJ\Delta U = q + w = 2.45\text{ kJ} + (-0.188\text{ kJ}) = +2.262\text{ kJ}.

  3. Round to two decimal places: ΔU=+2.26 kJ\Delta U = +2.26\text{ kJ}.

Final answer

w=−188 Jw = -188\text{ J} and ΔU=+2.26 kJ\Delta U = +2.26\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check units every time you add terms in thermodynamic equations such as ΔU=q+w\Delta U = q + w and ΔH=ΔU+Δ(PV)\Delta H = \Delta U + \Delta(PV).

  • Practice writing explicit unit labels inside your calculation steps rather than just appending units to the final answer.

OverviewACEpath Teacher's Diagnosis

03 The student ignores the initial volume of the liquid assuming it is negligible or zero, using only the final volume for the expansion work calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=780×101,325760=103,991 PaP = \frac{780 \times 101,325}{760} = 103,991\text{ Pa}

  2. Step 2

    ΔV=1.85 L=1.85×10−3 m3\Delta V = 1.85\text{ L} = 1.85 \times 10^{-3}\text{ m}^3

    Correct

    ΔV=V2−V1=1.85 L−0.0450 L=1.805 L=1.805×10−3 m3\Delta V = V_2 - V_1 = 1.85\text{ L} - 0.0450\text{ L} = 1.805\text{ L} = 1.805 \times 10^{-3}\text{ m}^3

    You took the final volume as ΔV\Delta V, forgetting to subtract the initial liquid volume of 45.0 mL45.0\text{ mL} (0.0450 L0.0450\text{ L}).

  3. Step 3

    w=−PΔV=−192 Jw = -P\Delta V = -192\text{ J}

    Correct

    w=−PextΔV=−(103,991 Pa)(1.805×10−3 m3)≈−188 Jw = -P_{\text{ext}}\Delta V = -(103,991\text{ Pa})(1.805 \times 10^{-3}\text{ m}^3) \approx -188\text{ J}

    You correctly used the expansion work formula w=−PΔVw = -P\Delta V, but the numerical value was affected by your previous ΔV\Delta V error.

  4. Step 4

    w=−0.192 kJ  ⟹  ΔU=q+w=2.45−0.192=+2.26 kJw = -0.192\text{ kJ} \implies \Delta U = q + w = 2.45 - 0.192 = +2.26\text{ kJ}

    Correct

    ΔU=q+w=2.45 kJ+(−0.188 kJ)=+2.26 kJ\Delta U = q + w = 2.45\text{ kJ} + (-0.188\text{ kJ}) = +2.26\text{ kJ}

    You correctly applied the first law of thermodynamics ΔU=q+w\Delta U = q + w. While your final value rounded coincidentally to +2.26 kJ+2.26\text{ kJ}, the intermediate work term carried forward the volume error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted external pressure from mmHg\text{mmHg} to Pa\text{Pa}.

You correctly remembered the negative sign for expansion work (w=−PΔVw = -P\Delta V).

You applied the first law of thermodynamics (ΔU=q+w\Delta U = q + w) with the correct signs and unit conversions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of initial volume in expansion work

No, this was an oversight in setting ΔV=Vfinal\Delta V = V_{\text{final}} instead of calculating Vfinal−VinitialV_{\text{final}} - V_{\text{initial}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Equating change in volume directly with final volume instead of strictly applying ΔV=Vfinal−Vinitial\Delta V = V_{\text{final}} - V_{\text{initial}}, especially when liquid volumes seem small compared to gas volumes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Change in Volume Definition
  • In pressure-volume work, ΔV\Delta V is always strictly V2−V1V_2 - V_1.

  • Always convert both V1V_1 and V2V_2 into matching units and compute their difference before calculating work.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert initial volume: V1=45.0 mL=0.0450 LV_1 = 45.0\text{ mL} = 0.0450\text{ L}

  2. Calculate volume change: ΔV=1.85 L−0.0450 L=1.805 L=1.805×10−3 m3\Delta V = 1.85\text{ L} - 0.0450\text{ L} = 1.805\text{ L} = 1.805 \times 10^{-3}\text{ m}^3

  3. Calculate expansion work: w=−(103,991 Pa)(1.805×10−3 m3)=−187.7 J≈−188 Jw = -(103,991\text{ Pa})(1.805 \times 10^{-3}\text{ m}^3) = -187.7\text{ J} \approx -188\text{ J} (or −0.188 kJ-0.188\text{ kJ})

  4. Calculate internal energy change: ΔU=2.45 kJ+(−0.188 kJ)=+2.26 kJ\Delta U = 2.45\text{ kJ} + (-0.188\text{ kJ}) = +2.26\text{ kJ}

Final answer

w=−188 Jw = -188\text{ J} and ΔU=+2.26 kJ\Delta U = +2.26\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out both VinitialV_{\text{initial}} and VfinalV_{\text{final}} explicitly at the start of any PΔVP\Delta V problem.

  • Verify unit consistency between mL\text{mL} and L\text{L} before taking their difference.

Lock it in

Similar question

01

A gas expands from 2.00 L2.00\text{ L} to 5.50 L5.50\text{ L} against a constant external pressure of 1.20 atm1.20\text{ atm} while absorbing 650 J650\text{ J} of heat. Calculate the work ww done on the system (in J\text{J}) and the change in internal energy ΔU\Delta U (in J\text{J}). (1 L⋅atm=101.325 J1\text{ L}\cdot\text{atm} = 101.325\text{ J})

Answer

ΔV=5.50−2.00=3.50 L\Delta V = 5.50 - 2.00 = 3.50\text{ L}. w=−PextΔV=−(1.20 atm)(3.50 L)=−4.20 L⋅atm=−4.20×101.325 J=−426 Jw = -P_{\text{ext}}\Delta V = -(1.20\text{ atm})(3.50\text{ L}) = -4.20\text{ L}\cdot\text{atm} = -4.20 \times 101.325\text{ J} = -426\text{ J}. ΔU=q+w=+650 J+(−426 J)=+224 J\Delta U = q + w = +650\text{ J} + (-426\text{ J}) = +224\text{ J}.

02

An ideal gas is compressed from an initial volume of 10.0 L10.0\text{ L} to 4.0 L4.0\text{ L} by a constant external pressure of 2.50×105 Pa2.50\times 10^5\text{ Pa}. During compression, the gas releases 950 J950\text{ J} of heat to the surroundings. Find ww and ΔU\Delta U for the gas in Joules.

Answer

ΔV=(4.0−10.0) L=−6.0 L=−6.0×10−3 m3\Delta V = (4.0 - 10.0)\text{ L} = -6.0\text{ L} = -6.0 \times 10^{-3}\text{ m}^3. w=−PextΔV=−(2.50×105 Pa)(−6.0×10−3 m3)=+1500 Jw = -P_{\text{ext}}\Delta V = -(2.50 \times 10^5\text{ Pa})(-6.0 \times 10^{-3}\text{ m}^3) = +1500\text{ J}. Because heat is released, q=−950 Jq = -950\text{ J}. ΔU=q+w=−950 J+1500 J=+550 J\Delta U = q + w = -950\text{ J} + 1500\text{ J} = +550\text{ J}.

03

A chemical reaction in a closed flexible vessel at 1.00 atm1.00\text{ atm} (101,325 Pa101,325\text{ Pa}) produces gas, expanding the vessel from 0.500 L0.500\text{ L} to 2.250 L2.250\text{ L}. The reaction has an internal energy change of ΔU=−1.25 kJ\Delta U = -1.25\text{ kJ}. Determine the heat qq exchanged in kilojoules, and state whether the reaction is endothermic or exothermic.

Answer

ΔV=2.250−0.500=1.750 L=1.750×10−3 m3\Delta V = 2.250 - 0.500 = 1.750\text{ L} = 1.750 \times 10^{-3}\text{ m}^3. w=−PextΔV=−(101,325 Pa)(1.750×10−3 m3)=−177.3 J=−0.177 kJw = -P_{\text{ext}}\Delta V = -(101,325\text{ Pa})(1.750 \times 10^{-3}\text{ m}^3) = -177.3\text{ J} = -0.177\text{ kJ}. From ΔU=q+w\Delta U = q + w, q=ΔU−w=−1.25 kJ−(−0.177 kJ)=−1.07 kJq = \Delta U - w = -1.25\text{ kJ} - (-0.177\text{ kJ}) = -1.07\text{ kJ}. Because q<0q < 0, the reaction is exothermic.

Loading workspace…