Resources
In a nuclear forensic analytical lab, the activity of a liquid waste sample containing strontium-90 (, a pure emitter with ) is determined using a calibrated liquid scintillation counter. An aliquot of of the aqueous waste is combined with of scintillation cocktail. Over a counting interval, the instrument records a total of . A blank background sample counted under identical geometry for registers . If the absolute counting efficiency of the detector for is , calculate the corrected net count rate in counts per minute (), and determine the volumetric activity of in the original waste liquid in .
Answer and steps
Final answer
Net count rate ; Volumetric activity
Steps
Calculate the gross and background count rates
The instrument records raw counts over specified time intervals. First, convert each total count into a count rate in counts per minute ():
Determine the net count rate ()
Subtract the background rate from the gross count rate to find the net count rate produced solely by the sample:
Convert the net count rate to true nuclear activity ()
The counter detects a fraction of all radioactive disintegrations according to its absolute counting efficiency (). The true rate of disintegrations per minute () in the aliquot is:
One Becquerel () is defined as one nuclear disintegration per second ():
Common Pitfall: Forgetting to divide by before calculating Becquerels leads to an activity value that is sixty times too large.
Calculate the volumetric activity in the original waste
The aliquot measured has a volume of . The volumetric activity () of in the liquid waste is:
Typical errors
01 The student uses the total cocktail mixture volume of 17.50 mL instead of the original 2.50 mL aliquot volume when calculating volumetric activity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You divided by the combined volume of the waste and scintillation cocktail (). The question asked for the volumetric activity of the original waste liquid, so you should divide only by the aliquot volume of waste introduced ().
WHAT YOU DID WELL
Compliments from Your TeacherYou calculated both the gross and background count rates accurately from the total counts and counting times.
You subtracted background counts correctly to determine the net count rate of .
You correctly used the counting efficiency and time conversion factor to compute the sample activity in Becquerels.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the scintillation cocktail as a diluent that defines the final sample volume of interest, rather than recognizing that the question asked for the concentration in the original undiluted liquid waste.
REASONING PATH
Your ACEpath teacher’s suggested approach- Distinguish Analytical Aliquot from Vial Matrix
Scintillation cocktail acts only as an energy-transfer detection medium; it does not change the amount of analyte drawn from the original sample source.
Always divide the measured activity by the volume of original sample taken (), not the total vial volume ().
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the aliquot volume of original waste liquid: .
Divide the measured aliquot activity by this volume: .
Convert to the requested units: .
Net count rate ; Volumetric activity
02 The student forgets to divide disintegrations per minute by 60 to convert to Becquerels, treating 1 cpm/efficiency directly as 1 Bq.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Dividing counts per minute by the efficiency gives disintegrations per minute (), not Becquerels (). Because , you need to divide by to convert to .
- Step 4Correct
Your concentration calculation and unit prefix conversion were set up properly, but the numerical result is times higher due to the prior -to- unit error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated both the gross and background count rates per minute.
You accurately found the net count rate by subtracting background from gross.
You correctly divided by the fractional counting efficiency () to account for detector efficiency.
You used the correct aliquot volume and properly converted to .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou labeled the result of directly as Becquerels () rather than disintegrations per minute ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the definition of the SI unit of activity: . When counting rates are recorded in , dividing by detector efficiency yields , which must be divided by to yield .
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Alignment: cpm to dpm to Bq
, and . Therefore, .
Always write explicit time units ( and ) and include the conversion factor before introducing .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert disintegrations per minute to Becquerels: .
Calculate the volumetric activity of the aliquot: .
Net count rate ; Volumetric activity
03 The student subtracts raw counts directly without dividing by their respective counting intervals to find count rates.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You subtracted raw background counts from raw gross counts directly, but the two counts were acquired over different time periods ( vs ). You need to determine the count rate for each measurement first () and then calculate .
- Step 2Correct
Your formula correctly divides the count rate by efficiency and to convert to , but the numerical result is affected by the incorrect net count rate from Step 1.
- Step 3Correct
Your volume conversion and scaling from to are executed correctly, but this final value inherits the discrepancy from the earlier steps.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that absolute activity requires dividing net count rate by efficiency.
You handled the unit conversion between disintegrations per minute () and Becquerels () by including the factor of .
You correctly converted the aliquot activity into the volumetric activity of the bulk liquid waste in .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou subtracted total background counts from total gross counts even though their acquisition durations were different.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating total accumulated counts () with count rates (). When counting intervals ( and ) are unequal, raw counts represent different time bases and are not directly additive or subtractable.
REASONING PATH
Your ACEpath teacher’s suggested approach- Time Normalization Check
Always convert gross and background raw counts to rates ( or ) before taking differences: .
Check whether the problem specifies identical or different counting times for the sample and background before writing your first subtraction line.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the individual count rates: and .
Subtract the background rate from the gross rate: .
Convert the net count rate to activity in : .
Divide by the aliquot volume to find the volumetric activity: .
Net count rate ; Volumetric activity
Lock it in
When calculating the activity concentration of an original liquid sample analyzed via liquid scintillation counting (LSC), which volume must be used in the denominator?
The aliquot volume of the original sample (), not the total mixture volume containing the scintillation cocktail.
Similar question
A aliquot of tritiated groundwater is mixed with of scintillation fluid. The detector records a net count rate of with an efficiency of . Calculate the tritium concentration in the groundwater in .
Answer
- True activity: .\n2. Volumetric activity: .
A bioassay urine sample is added to of cocktail. Gross counting over gives , while background over gives . With an efficiency of , find the volumetric activity of the urine in .
Answer
- Count rates: , .\n2. Aliquot activity: .\n3. Volumetric activity: .
An environmental soil leachate is diluted with deionized water. A aliquot of this diluted solution is combined with of scintillation cocktail, yielding a measured activity of . Determine the activity concentration of the undiluted leachate in .
Answer
- Concentration in diluted solution: .\n2. Account for dilution: .