Resources
Consider the diagonal staircase boundary separating metals and nonmetals in Period and Period . (a) Identify the exact element in Period , Group that sits directly on the boundary but exhibits amphoteric behavior while remaining strictly classified as a post-transition metal. (b) Contrast it with the adjacent Period , Group neighbor and the Period , Group neighbor by stating whether each is a metal, nonmetal, or metalloid.
Answer and steps
Final answer
(a) Aluminum (), post-transition (poor) metal; (b) Boron () is a metalloid, and Germanium () is a metalloid.
Steps
Identify the element in Period , Group
Locate Period and Group (the boron group) on the periodic table:
- Period , Group is boron (, atomic number ).
- Period , Group directly below it is aluminum (, atomic number ).
Aluminum lies right along the dividing staircase that separates metals from nonmetals. Although its oxide () and hydroxide () exhibit amphoteric behavior (reacting with both acids and bases), aluminum possesses high electrical and thermal conductivity, malleability, and a close-packed metallic crystal structure. Therefore, it is strictly classified as a post-transition metal (or poor metal), rather than a metalloid.
Classify the adjacent Period , Group neighbor
Directly above aluminum in Period , Group is boron ():
- Boron forms covalent networks, has low electrical conductivity at room temperature that increases with temperature (semiconductor behavior), and forms acidic oxides ().
- Because it shares intermediate physical and chemical properties between metals and nonmetals, boron is classified as a metalloid.
Classify the adjacent Period , Group neighbor
Move diagonally down and to the right from aluminum, or identify the element in Period , Group (the carbon group):
- Period , Group is carbon ().
- Period , Group is silicon ().
- Period , Group is germanium (, atomic number ).
Germanium is a lustrous, brittle semiconductor lying directly along the staircase line. It exhibits chemical and electrical properties intermediate between silicon and tin, and is universally classified as a metalloid.
Common Pitfall to Avoid
Do not assume that every element touching the stepped diagonal line is a metalloid. While silicon () and germanium () along this border are metalloids, aluminum () has pronounced metallic bonding, high conductivity, and ductility, keeping it firmly categorized as a metal despite its amphoteric chemistry.
Typical errors
01 The student misidentifies the staircase boundary elements, assuming that exhibiting amphoteric behavior along the metal-nonmetal boundary means aluminum is classified as a metalloid rather than a post-transition metal.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Period 3, Group 13 element is forms amphoteric is classified as a metalloid
CorrectPeriod 3, Group 13 is aluminum (), which forms amphoteric but is classified as a post-transition metal.
You correctly identified the element as aluminum () and noted its amphoteric oxide, but concluded that it is a metalloid. Although aluminum borders the diagonal staircase, its close-packed metallic structure, malleability, and high electrical conductivity classify it strictly as a post-transition metal.
- Step 2
Period 2, Group 13: Boron () is a metalloid
- Step 3
Period 4, Group 14: Germanium () is a metalloid
WHAT YOU DID WELL
Compliments from Your TeacherYou located the correct elements for all three positions on the periodic table.
You recognized that aluminum forms the amphoteric oxide .
You correctly classified both boron and germanium as metalloids.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou knew aluminum sits on the dividing line and forms an amphoteric oxide, but you conflated bordering the metalloid line with being a metalloid.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTouching the staircase boundary and exhibiting amphoteric chemistry does not make an element a metalloid. Aluminum possesses standard metallic properties—high electrical and thermal conductivity, ductility, and close-packed metallic bonding—which firmly place it among the post-transition (poor) metals.
REASONING PATH
Your ACEpath teacher’s suggested approach- Staircase Border vs. Metalloid Classification
The commonly accepted metalloids along the dividing staircase are , , , , , and . Aluminum touches the border but is an exception.
Always classify aluminum () as a metal (post-transition metal), despite its position along the staircase line.
- Amphoterism vs. Metalloid Character
Amphoteric behavior describes oxide or hydroxide chemical reactivity with acids and bases, not physical classification as a metalloid.
Base metal/metalloid/nonmetal classification on bulk physical properties (conductivity, bonding, malleability) rather than amphoterism alone.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that Period 3, Group 13 is aluminum ().
Evaluate bulk properties: aluminum has high metallic conductivity, malleability, ductility, and metallic bonding.
Conclude that aluminum is classified as a post-transition metal, not a metalloid.
(a) Aluminum (), post-transition metal; (b) Boron () is a metalloid, and Germanium () is a metalloid.
02 The student confuses the identity of the Period 4, Group 14 neighbor along the diagonal boundary by selecting gallium (Group 13) instead of germanium (Group 14).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Period 3, Group 13 element: Aluminum (Al) Al exhibits amphoteric behavior and is a post-transition metal
- Step 2
Period 2, Group 13 is Boron (B), which is a metalloid
- Step 3
Period 4, Group 14 is Gallium (Ga), which is a metal
CorrectPeriod 4, Group 14 is germanium (), which is a metalloid.
Gallium () is in Group 13, directly beneath aluminum. The element in Period 4, Group 14 is germanium (), which lies on the staircase boundary and is classified as a metalloid.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified aluminum () as the Period 3, Group 13 post-transition metal exhibiting amphoteric behavior.
You accurately identified boron () as the Period 2, Group 13 element and classified it as a metalloid.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote gallium () for Period 4, Group 14 instead of germanium ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou tracked directly down Group 13 into Period 4 (locating ) rather than moving one column to the right into Group 14 (locating ), which led you to classify it as a post-transition metal instead of a metalloid.
REASONING PATH
Your ACEpath teacher’s suggested approach- Verify Group vs. Period Coordinates
Group numbers run vertically across columns ( to ), while Period numbers run horizontally across rows ( to ).
Trace across row 4 to column 14: (1), (2), transition metals (3–12), (13), and (14).
CORRECTED PATH
ACEpath Teacher's DemonstrationCount across Period 4 to Group 14: following the transition block (Groups 3–12), Group 13 is gallium (, ) and Group 14 is germanium (, ).
Germanium sits directly along the diagonal boundary and exhibits semiconductor properties intermediate between metals and nonmetals, classifying it as a metalloid.
(a) Aluminum (), post-transition metal; (b) Boron () is a metalloid, and Germanium () is a metalloid.
03 The student misclassifies germanium as a post-transition metal because it lies in Period 4 below nonmetals, overlooking that it is a metalloid.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You correctly identified germanium in Period , Group , but it lies along the metalloid staircase line and exhibits intermediate semiconductor properties, making it a metalloid rather than a metal.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified aluminum and its classification as a post-transition metal.
You properly located boron and classified it as a metalloid.
You correctly determined that germanium sits in Period , Group .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that moving down to Period in Group crosses completely into the metallic regime, overlooking that germanium sits directly on the staircase divider and is universally classified as a metalloid.
REASONING PATH
Your ACEpath teacher’s suggested approach- Recall the Metalloid Staircase
The commonly recognized metalloids along the dividing staircase are boron (), silicon (), germanium (), arsenic (), antimony (), and tellurium ().
When classifying elements adjacent to the stepped line in Period , verify whether the element is one of the classic semiconductor metalloids before labeling it a metal.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that germanium (, ) lies directly on the staircase boundary below silicon.
Identify that germanium has intermediate electrical conductivity (semiconducting) and brittle covalent bonding.
Conclude that germanium is classified as a metalloid.
(a) Aluminum (), post-transition (poor) metal; (b) Boron () is a metalloid, and Germanium () is a metalloid.
Lock it in
Which six elements along the periodic table staircase are universally recognized as metalloids?
Boron (), silicon (), germanium (), arsenic (), antimony (), and tellurium ().
Similar question
Identify the element in Period 3, Group 14. State whether it is classified as a metal, nonmetal, or metalloid, and contrast its electrical conductivity behavior with that of aluminum.
Answer
The element is silicon (), classified as a metalloid (semiconductor). Unlike aluminum (a metal whose electrical conductivity decreases as temperature rises), silicon's electrical conductivity increases with increasing temperature.
Both gallium () and arsenic () are in Period 4. Classify each as a metal, nonmetal, or metalloid, and identify which one sits directly on the metalloid side of the boundary.
Answer
Gallium () is a post-transition metal, while arsenic () is a metalloid. Arsenic sits directly on the metalloid side of the boundary line.
Tin () and lead () lie directly below germanium in Group 14. Explain why neither tin nor lead is classified as a metalloid, referencing periodic trends in metallic character.
Answer
Metallic character increases moving down a group due to increasing atomic radius and easier valence electron loss. By Period 5 (tin) and Period 6 (lead), metallic bonding dominates completely, classifying both as post-transition metals rather than metalloids.