Resources

A standard electrochemical activity series for metals lists the following standard reduction potentials: Mg2+(aq)+2e−→Mg(s)(E∘=−2.37 V)\text{Mg}^{2+}(aq) + 2e^- \rightarrow \text{Mg}(s) \quad (E^\circ = -2.37\text{ V}) Fe2+(aq)+2e−→Fe(s)(E∘=−0.44 V)\text{Fe}^{2+}(aq) + 2e^- \rightarrow \text{Fe}(s) \quad (E^\circ = -0.44\text{ V}) Cu2+(aq)+2e−→Cu(s)(E∘=+0.34 V)\text{Cu}^{2+}(aq) + 2e^- \rightarrow \text{Cu}(s) \quad (E^\circ = +0.34\text{ V})

(a) Classify the reaction archetype that occurs when solid elemental metal is immersed in an aqueous solution of another metal cation. (b) Determine which of the following two mixtures will undergo a spontaneous single-replacement reaction under standard conditions: (i) solid copper placed into aqueous iron(II) sulfate, Cu(s)+FeSO4(aq)\text{Cu}(s) + \text{FeSO}_4(aq), or (ii) solid iron placed into aqueous copper(II) sulfate, Fe(s)+CuSO4(aq)\text{Fe}(s) + \text{CuSO}_4(aq). Write the balanced net ionic equation and calculate the standard cell potential Ecell∘E^\circ_{\text{cell}} for the spontaneous process.

Answer and steps

Final answer

(a) Single-replacement (redox); (b) Mixture (ii) will spontaneously react: Fe(s)+Cu2+(aq)→Fe2+(aq)+Cu(s)\text{Fe}(s) + \text{Cu}^{2+}(aq) \rightarrow \text{Fe}^{2+}(aq) + \text{Cu}(s), with Ecell∘=+0.78 VE^\circ_{\text{cell}} = +0.78\text{ V}.

Steps

01

Comparing the Metal Activity

Part (a): Classifying the Reaction Type

When a solid elemental metal replaces a metal cation from an aqueous salt solution, one element displaces another in a chemical compound according to the general pattern: A(s)+BX(aq)→AX(aq)+B(s)\ce{A}(s) + \ce{BX}(aq) \rightarrow \ce{AX}(aq) + \ce{B}(s) Because the free neutral metal A\ce{A} loses electrons (is oxidized) and the dissolved cation BX+\ce{B^+} gains electrons (is reduced), this archetype is classified as a single-replacement (or single-displacement) reaction, which is fundamentally an oxidation-reduction (redox) reaction.

Part (b): Determining Spontaneity and the Net Ionic Equation

A redox reaction is spontaneous under standard conditions if the standard cell potential is positive: Ecell∘=Ecathode∘−Eanode∘>0E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} > 0 where the cathode represents the reduction half-reaction (electron gain) and the anode represents the oxidation half-reaction (electron loss).

A more active metal has a more negative standard reduction potential, meaning it is more easily oxidized and can displace metals with higher (more positive) reduction potentials from solution:

  • E∘(FeX2+/Fe)=−0.44 VE^\circ(\ce{Fe^2+}/\ce{Fe}) = -0.44\text{ V}
  • E∘(CuX2+/Cu)=+0.34 VE^\circ(\ce{Cu^2+}/\ce{Cu}) = +0.34\text{ V}

Since iron has a more negative reduction potential than copper, metallic iron (Fe\ce{Fe}) is a stronger reducing agent than copper (Cu\ce{Cu}) and can reduce CuX2+\ce{Cu^2+} ions to metallic Cu\ce{Cu}.

02

Evaluating the Two Mixtures

  • Mixture (i): Cu(s)+FeSOX4(aq)\ce{Cu}(s) + \ce{FeSO4}(aq)

    • Reduction: FeX2+(aq)+2e−→Fe(s)(E∘=−0.44 V)\ce{Fe^2+}(aq) + 2e^- \rightarrow \ce{Fe}(s) \quad (E^\circ = -0.44\text{ V})
    • Oxidation: Cu(s)→CuX2+(aq)+2e−(Eox∘=−0.34 V)\ce{Cu}(s) \rightarrow \ce{Cu^2+}(aq) + 2e^- \quad (E^\circ_{\text{ox}} = -0.34\text{ V})
    • Cell potential: Ecell∘=−0.44 V−(+0.34 V)=−0.78 V<0E^\circ_{\text{cell}} = -0.44\text{ V} - (+0.34\text{ V}) = -0.78\text{ V} < 0
    • Because Ecell∘E^\circ_{\text{cell}} is negative, this reaction is non-spontaneous under standard conditions.
  • Mixture (ii): Fe(s)+CuSOX4(aq)\ce{Fe}(s) + \ce{CuSO4}(aq)

    • Reduction (cathode): CuX2+(aq)+2e−→Cu(s)(E∘=+0.34 V)\ce{Cu^2+}(aq) + 2e^- \rightarrow \ce{Cu}(s) \quad (E^\circ = +0.34\text{ V})
    • Oxidation (anode): Fe(s)→FeX2+(aq)+2e−(E∘=−0.44 V)\ce{Fe}(s) \rightarrow \ce{Fe^2+}(aq) + 2e^- \quad (E^\circ = -0.44\text{ V})
    • Cell potential: Ecell∘=E∘(CuX2+/Cu)−E∘(FeX2+/Fe)=+0.34 V−(−0.44 V)=+0.78 VE^\circ_{\text{cell}} = E^\circ(\ce{Cu^2+}/\ce{Cu}) - E^\circ(\ce{Fe^2+}/\ce{Fe}) = +0.34\text{ V} - (-0.44\text{ V}) = +0.78\text{ V}
    • Because Ecell∘>0E^\circ_{\text{cell}} > 0, mixture (ii) undergoes a spontaneous reaction.
03

Writing the Net Ionic Equation

Omitting the spectator sulfate ions (SOX4X2−\ce{SO4^2-}), the overall spontaneous net ionic equation is: Fe(s)+CuX2+(aq)→FeX2+(aq)+Cu(s)\ce{Fe}(s) + \ce{Cu^2+}(aq) \rightarrow \ce{Fe^2+}(aq) + \ce{Cu}(s)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts reduction potentials in the wrong order (anode minus cathode instead of cathode minus anode) and mistakenly concludes that a negative E°cell represents a spontaneous reaction, selecting mixture (i).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Single-replacement (redox) reaction.

  2. Step 2

    Ecell∘=E∘(anode)−E∘(cathode)  ⟹  Spontaneous when Ecell∘<0E^\circ_{\text{cell}} = E^\circ(\text{anode}) - E^\circ(\text{cathode}) \implies \text{Spontaneous when } E^\circ_{\text{cell}} < 0

    Correct

    Ecell∘=E∘(cathode)−E∘(anode)and spontaneous when Ecell∘>0E^\circ_{\text{cell}} = E^\circ(\text{cathode}) - E^\circ(\text{anode}) \quad \text{and spontaneous when } E^\circ_{\text{cell}} > 0

    The standard cell potential is calculated as Ecathode∘−Eanode∘E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}, not anode minus cathode. Additionally, a redox process is spontaneous under standard conditions when Ecell∘>0E^\circ_{\text{cell}} > 0 (corresponding to ΔG∘=−nFEcell∘<0\Delta G^\circ = -nFE^\circ_{\text{cell}} < 0).

  3. Step 3

    For Cu(s)+Fe2+(aq):Ecell∘=0.34 V−(−0.44 V)=0.78 V  ⟹  For Fe(s)+Cu2+(aq):Ecell∘=−0.44 V−0.34 V=−0.78 V\text{For } \text{Cu}(s) + \text{Fe}^{2+}(aq): E^\circ_{\text{cell}} = 0.34\text{ V} - (-0.44\text{ V}) = 0.78\text{ V} \implies \text{For } \text{Fe}(s) + \text{Cu}^{2+}(aq): E^\circ_{\text{cell}} = -0.44\text{ V} - 0.34\text{ V} = -0.78\text{ V}

    Correct

    For Cu(s)+Fe2+(aq):Ecell∘=−0.44 V−(+0.34 V)=−0.78 V  ⟹  For Fe(s)+Cu2+(aq):Ecell∘=+0.34 V−(−0.44 V)=+0.78 V\text{For } \text{Cu}(s) + \text{Fe}^{2+}(aq): E^\circ_{\text{cell}} = -0.44\text{ V} - (+0.34\text{ V}) = -0.78\text{ V} \implies \text{For } \text{Fe}(s) + \text{Cu}^{2+}(aq): E^\circ_{\text{cell}} = +0.34\text{ V} - (-0.44\text{ V}) = +0.78\text{ V}

    Because you reversed the terms in the cell potential formula, the signs for both cell potentials were flipped.

  4. Step 4

    Mixture (i) is spontaneous : Cu(s)+Fe2+(aq)→Cu2+(aq)+Fe(s) with Ecell∘=−0.78 V\text{Mixture (i) is spontaneous : } \text{Cu}(s) + \text{Fe}^{2+}(aq) \rightarrow \text{Cu}^{2+}(aq) + \text{Fe}(s) \text{ with } E^\circ_{\text{cell}} = -0.78\text{ V}

    Correct

    Mixture (ii) is spontaneous: Fe(s)+Cu2+(aq)→Fe2+(aq)+Cu(s) with Ecell∘=+0.78 V\text{Mixture (ii) is spontaneous: } \text{Fe}(s) + \text{Cu}^{2+}(aq) \rightarrow \text{Fe}^{2+}(aq) + \text{Cu}(s) \text{ with } E^\circ_{\text{cell}} = +0.78\text{ V}

    Downstream of the sign and criterion errors, you chose the non-spontaneous mixture (i) rather than mixture (ii).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the process as a single-replacement redox reaction.

You correctly paired the standard reduction potential values with their respective half-reactions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Subtracted reduction potentials in reverse order and inverted the electrochemical spontaneity rule

No, this is a conceptual misunderstanding involving electrochemical sign conventions rather than a simple arithmetic slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the sign convention for standard cell potential with that of Gibbs free energy change (ΔG°<0ΔG° < 0 indicates spontaneity, whereas E°cell>0E°_{\text{cell}} > 0 indicates spontaneity), and you subtracted the reduction potentials in the wrong order (E°anode−E°cathodeE°_{\text{anode}} - E°_{\text{cathode}} instead of E°cathode−E°anodeE°_{\text{cathode}} - E°_{\text{anode}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Standard Cell Potential Formula
  • Ecell∘=Ecathode∘−Eanode∘=Ereduction∘−Eoxidation∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = E^\circ_{\text{reduction}} - E^\circ_{\text{oxidation}}

  • Always identify which species gains electrons (cathode) and subtract the reduction potential of the species losing electrons (anode).

Electrochemical Spontaneity Criterion
  • ΔG∘=−nFEcell∘\Delta G^\circ = -nFE^\circ_{\text{cell}}, so a reaction is thermodynamically spontaneous when Ecell∘>0E^\circ_{\text{cell}} > 0.

  • Check that a spontaneous cell potential is strictly positive before concluding which reaction occurs.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the standard cell potential equation: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}.

  2. Evaluate mixture (i): Fe2+\text{Fe}^{2+} is reduced (−0.44 V-0.44\text{ V}) and Cu\text{Cu} is oxidized (+0.34 V+0.34\text{ V}), giving Ecell∘=−0.44 V−0.34 V=−0.78 V<0E^\circ_{\text{cell}} = -0.44\text{ V} - 0.34\text{ V} = -0.78\text{ V} < 0 (non-spontaneous).

  3. Evaluate mixture (ii): Cu2+\text{Cu}^{2+} is reduced (+0.34 V+0.34\text{ V}) and Fe\text{Fe} is oxidized (−0.44 V-0.44\text{ V}), giving Ecell∘=+0.34 V−(−0.44 V)=+0.78 V>0E^\circ_{\text{cell}} = +0.34\text{ V} - (-0.44\text{ V}) = +0.78\text{ V} > 0 (spontaneous).

Final answer

(a) Single-replacement (redox); (b) Mixture (ii) will spontaneously react: Fe(s)+Cu2+(aq)→Fe2+(aq)+Cu(s)\text{Fe}(s) + \text{Cu}^{2+}(aq) \rightarrow \text{Fe}^{2+}(aq) + \text{Cu}(s), with Ecell∘=+0.78 VE^\circ_{\text{cell}} = +0.78\text{ V}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic 'Red Cat' (Reduction at Cathode) and the subtraction order: Cathode minus Anode.

  • Remember the inverse relationship: a negative ΔG∘\Delta G^\circ corresponds to a positive Ecell∘E^\circ_{\text{cell}}.

  • Practice determining cell potentials and spontaneity across multiple pairs from an activity series table.

OverviewACEpath Teacher's Diagnosis

02 The student adds standard reduction potentials directly instead of subtracting the anode potential or reversing the sign of the oxidation half-reaction, calculating an incorrect E°cell of -0.10 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Single-replacement reaction.

  2. Step 2

    Mixture (ii) reacts because Fe\text{Fe} is more active than Cu\text{Cu}.

  3. Step 3

    Net ionic equation: Fe(s)+Cu2+(aq)→Fe2+(aq)+Cu(s)\text{Fe}(s) + \text{Cu}^{2+}(aq) \rightarrow \text{Fe}^{2+}(aq) + \text{Cu}(s)

  4. Step 4

    Ecell∘=E∘(Cu2+/Cu)+E∘(Fe2+/Fe)  ⟹  Ecell∘=+0.34 V+(−0.44 V)=−0.10 VE^\circ_{\text{cell}} = E^\circ(\text{Cu}^{2+}/\text{Cu}) + E^\circ(\text{Fe}^{2+}/\text{Fe}) \implies E^\circ_{\text{cell}} = +0.34\text{ V} + (-0.44\text{ V}) = -0.10\text{ V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=+0.34 V−(−0.44 V)=+0.78 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.34\text{ V} - (-0.44\text{ V}) = +0.78\text{ V}

    You added the standard reduction potential of the oxidized species directly instead of subtracting it from the cathode potential or reversing its sign to find the oxidation potential.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the reaction type as a single-replacement reaction.

You used the activity series correctly to pick mixture (ii) as the spontaneous process.

You wrote the correct balanced net ionic equation with appropriate states of matter.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in standard cell potential calculation

You knew mixture (ii) was spontaneous, but you added the two standard reduction potentials without reversing the sign for the oxidation half-reaction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the standard cell potential formula Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} with direct addition of reduction potentials, or forgetting that oxidation potentials are the negative of reduction potentials (Eox∘=−Ered∘E^\circ_{\text{ox}} = -E^\circ_{\text{red}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Cathode vs. Anode Identification
  • Reduction occurs at the cathode (gains electrons), while oxidation occurs at the anode (loses electrons).

  • Label the species being reduced as cathode and the species being oxidized as anode before calculating.

Standard Cell Potential Formula
  • Using reduction potentials: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}. Alternatively, Ecell∘=Ered∘+Eox∘E^\circ_{\text{cell}} = E^\circ_{\text{red}} + E^\circ_{\text{ox}}, where Eox∘=−Ered∘E^\circ_{\text{ox}} = -E^\circ_{\text{red}}.

  • Always subtract the anode's reduction potential or invert its sign before adding.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the reduction half-reaction (cathode): Cu2+(aq)+2e−→Cu(s)\text{Cu}^{2+}(aq) + 2e^- \rightarrow \text{Cu}(s), with Ecathode∘=+0.34 VE^\circ_{\text{cathode}} = +0.34\text{ V}.

  2. Identify the oxidation half-reaction (anode): Fe(s)→Fe2+(aq)+2e−\text{Fe}(s) \rightarrow \text{Fe}^{2+}(aq) + 2e^-, with Eanode∘=−0.44 VE^\circ_{\text{anode}} = -0.44\text{ V}.

  3. Apply the standard cell potential relation: Ecell∘=Ecathode∘−Eanode∘=+0.34 V−(−0.44 V)=+0.78 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.34\text{ V} - (-0.44\text{ V}) = +0.78\text{ V}.

Final answer

Ecell∘=+0.78 VE^\circ_{\text{cell}} = +0.78\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that a spontaneous redox reaction under standard conditions must yield a positive Ecell∘E^\circ_{\text{cell}} value (Ecell∘>0E^\circ_{\text{cell}} > 0).

  • Practice using the formula Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} to prevent accidental direct addition of tabulated reduction potentials.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets standard reduction potentials by assuming more negative values correspond to stronger oxidizing agents, concluding that mixture (i) is spontaneous.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Single-replacement reaction.

  2. Step 2

    The more negative potential so Fe2+\text{Fe}^{2+} reduces instead of Cu2+\text{Cu}^{2+}.   ⟹  \implies Mixture (i) is spontaneous.

    Correct

    Since E∘(Cu2+/Cu)=+0.34 V>E∘(Fe2+/Fe)=−0.44 VE^\circ(\text{Cu}^{2+}/\text{Cu}) = +0.34\text{ V} > E^\circ(\text{Fe}^{2+}/\text{Fe}) = -0.44\text{ V}, Cu2+\text{Cu}^{2+} has a greater reduction potential and is reduced, while metallic Fe\text{Fe} is oxidized. Therefore, mixture (ii) is spontaneous.

    A more positive (higher) standard reduction potential indicates a stronger tendency to gain electrons (undergo reduction). Because +0.34 V>−0.44 V+0.34\text{ V} > -0.44\text{ V}, Cu2+\text{Cu}^{2+} is reduced and metallic Fe\text{Fe} is oxidized, making mixture (ii) spontaneous.

  3. Step 3

    Net ionic equation: Cu(s)+Fe2+(aq)→Cu2+(aq)+Fe(s)\text{Cu}(s) + \text{Fe}^{2+}(aq) \rightarrow \text{Cu}^{2+}(aq) + \text{Fe}(s)   ⟹  \implies Ecell∘=−0.44 V−0.34 V=−0.78 VE^\circ_{\text{cell}} = -0.44\text{ V} - 0.34\text{ V} = -0.78\text{ V}

    Correct

    Fe(s)+Cu2+(aq)→Fe2+(aq)+Cu(s)\text{Fe}(s) + \text{Cu}^{2+}(aq) \rightarrow \text{Fe}^{2+}(aq) + \text{Cu}(s) with Ecell∘=+0.34 V−(−0.44 V)=+0.78 VE^\circ_{\text{cell}} = +0.34\text{ V} - (-0.44\text{ V}) = +0.78\text{ V}

    Because you selected mixture (i), you wrote the net ionic equation and computed Ecell∘E^\circ_{\text{cell}} for that non-spontaneous reaction. Notice that your calculated Ecell∘=−0.78 VE^\circ_{\text{cell}} = -0.78\text{ V} is negative, which serves as a self-check that mixture (i) cannot be spontaneous under standard conditions.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the reaction of a solid elemental metal in an aqueous metal salt solution as a single-replacement reaction.

You correctly set up the mathematical formula Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} for your chosen pair of half-reactions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Standard reduction potential interpretation error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the physical meaning of standard reduction potentials, treating the more negative potential as the species that undergoes reduction instead of the species with the more positive potential.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reduction Potential Criterion
  • The half-reaction with the more positive (algebraically larger) E∘E^\circ proceeds as reduction at the cathode; the more negative E∘E^\circ proceeds as oxidation at the anode.

  • Compare E∘E^\circ values on a number line: assign reduction to the higher value and oxidation to the lower value.

Cell Potential Spontaneity Check
  • A galvanic or electrochemical process is spontaneous under standard conditions if and only if Ecell∘>0E^\circ_{\text{cell}} > 0.

  • If your calculated Ecell∘E^\circ_{\text{cell}} is negative, the reverse reaction is spontaneous, not the forward reaction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the two standard reduction potentials: E∘(Cu2+/Cu)=+0.34 VE^\circ(\text{Cu}^{2+}/\text{Cu}) = +0.34\text{ V} and E∘(Fe2+/Fe)=−0.44 VE^\circ(\text{Fe}^{2+}/\text{Fe}) = -0.44\text{ V}.

  2. Compare the potentials: +0.34 V>−0.44 V+0.34\text{ V} > -0.44\text{ V}, meaning Cu2+\text{Cu}^{2+} has a greater driving force to be reduced (cathode) and Fe(s)\text{Fe}(s) is oxidized (anode).

  3. Conclude that mixture (ii), Fe(s)+CuSO4(aq)\text{Fe}(s) + \text{CuSO}_4(aq), is the spontaneous combination.

  4. Write the spontaneous net ionic equation: Fe(s)+Cu2+(aq)→Fe2+(aq)+Cu(s)\text{Fe}(s) + \text{Cu}^{2+}(aq) \rightarrow \text{Fe}^{2+}(aq) + \text{Cu}(s).

  5. Calculate the cell potential: Ecell∘=Ecathode∘−Eanode∘=+0.34 V−(−0.44 V)=+0.78 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.34\text{ V} - (-0.44\text{ V}) = +0.78\text{ V}.

Final answer

(a) Single-replacement (redox); (b) Mixture (ii) will spontaneously react: Fe(s)+Cu2+(aq)→Fe2+(aq)+Cu(s)\text{Fe}(s) + \text{Cu}^{2+}(aq) \rightarrow \text{Fe}^{2+}(aq) + \text{Cu}(s), with Ecell∘=+0.78 VE^\circ_{\text{cell}} = +0.78\text{ V}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between E∘E^\circ magnitude, oxidizing strength, and spontaneity (Ecell∘>0E^\circ_{\text{cell}} > 0).

  • Practice identifying the cathode and anode directly from an electrochemical series table by choosing the more positive potential for reduction.

Lock it in

Similar question

01

Given the standard reduction potentials E∘(Sn2+/Sn)=−0.14 VE^\circ(\text{Sn}^{2+}/\text{Sn}) = -0.14\text{ V} and E∘(Ni2+/Ni)=−0.26 VE^\circ(\text{Ni}^{2+}/\text{Ni}) = -0.26\text{ V}, determine whether solid nickel will spontaneously displace tin(II) ions from an aqueous solution under standard conditions. Calculate Ecell∘E^\circ_{\text{cell}}.

Answer

Yes, the reaction is spontaneous with Ecell∘=+0.12 VE^\circ_{\text{cell}} = +0.12\text{ V}. Key steps: Reduction (cathode) is Sn2++2e−→Sn\text{Sn}^{2+} + 2e^- \rightarrow \text{Sn} (−0.14 V-0.14\text{ V}); oxidation (anode) is Ni→Ni2++2e−\text{Ni} \rightarrow \text{Ni}^{2+} + 2e^- (−0.26 V-0.26\text{ V}). Ecell∘=−0.14 V−(−0.26 V)=+0.12 V>0E^\circ_{\text{cell}} = -0.14\text{ V} - (-0.26\text{ V}) = +0.12\text{ V} > 0.

02

A chemist mixes solid copper with aqueous silver nitrate: Cu(s)+2AgNO3(aq)\text{Cu}(s) + 2\text{AgNO}_3(aq). Given E∘(Ag+/Ag)=+0.80 VE^\circ(\text{Ag}^+/\text{Ag}) = +0.80\text{ V} and E∘(Cu2+/Cu)=+0.34 VE^\circ(\text{Cu}^{2+}/\text{Cu}) = +0.34\text{ V}, write the balanced net ionic equation and find Ecell∘E^\circ_{\text{cell}}.

Answer

Cu(s)+2Ag+(aq)→Cu2+(aq)+2Ag(s)\text{Cu}(s) + 2\text{Ag}^+(aq) \rightarrow \text{Cu}^{2+}(aq) + 2\text{Ag}(s) with Ecell∘=+0.46 VE^\circ_{\text{cell}} = +0.46\text{ V}. Key steps: Silver is reduced at the cathode (+0.80 V+0.80\text{ V}), and copper is oxidized at the anode (+0.34 V+0.34\text{ V}). Ecell∘=+0.80 V−(+0.34 V)=+0.46 VE^\circ_{\text{cell}} = +0.80\text{ V} - (+0.34\text{ V}) = +0.46\text{ V}.

03

Solid lead is placed into an aqueous solution of magnesium sulfate: Pb(s)+MgSO4(aq)\text{Pb}(s) + \text{MgSO}_4(aq). Using E∘(Mg2+/Mg)=−2.37 VE^\circ(\text{Mg}^{2+}/\text{Mg}) = -2.37\text{ V} and E∘(Pb2+/Pb)=−0.13 VE^\circ(\text{Pb}^{2+}/\text{Pb}) = -0.13\text{ V}, calculate Ecell∘E^\circ_{\text{cell}} and determine whether any metallic magnesium will precipitate under standard conditions.

Answer

Ecell∘=−2.24 VE^\circ_{\text{cell}} = -2.24\text{ V}; no magnesium will precipitate because the process is non-spontaneous. Key steps: Reduction of Mg2+\text{Mg}^{2+} gives Ecathode∘=−2.37 VE^\circ_{\text{cathode}} = -2.37\text{ V}; oxidation of Pb\text{Pb} gives Eanode∘=−0.13 VE^\circ_{\text{anode}} = -0.13\text{ V}. Ecell∘=−2.37 V−(−0.13 V)=−2.24 V<0E^\circ_{\text{cell}} = -2.37\text{ V} - (-0.13\text{ V}) = -2.24\text{ V} < 0.

Loading workspace…