Resources

A sealed, flexible cylinder with a frictionless piston contains 2.40 L2.40\text{ L} of ideal nitrogen gas at a pressure of 1.15 atm1.15\text{ atm} and a constant temperature of 298 K298\text{ K}. If the external pressure on the piston is isothermally increased to 3.45 atm3.45\text{ atm}, calculate the new equilibrium volume of the nitrogen gas in liters.

Answer and steps

Final answer

0.800 L0.800\text{ L}

Steps

01

Identify the constant and changing variables

The cylinder is sealed (the amount of gas, nn, does not change) and the process is specified as isothermal (the absolute temperature, TT, remains constant at 298 K298\text{ K}).

The given values are:

  • Initial pressure, P1=1.15 atmP_1 = 1.15\text{ atm}
  • Initial volume, V1=2.40 LV_1 = 2.40\text{ L}
  • Final pressure, P2=3.45 atmP_2 = 3.45\text{ atm}
  • Final volume, V2=?V_2 = ?
02

Apply Boyle's Law

When the temperature and amount of an ideal gas are held constant, pressure and volume are inversely proportional according to Boyle's Law:

P1V1=P2V2P_1 V_1 = P_2 V_2

Rearrange the equation to solve for the final volume V2V_2:

V2=P1V1P2V_2 = \frac{P_1 V_1}{P_2}

03

Calculate the final volume

Substitute the known values into the rearranged equation:

V2=1.15 atm×2.40 L3.45 atmV_2 = \frac{1.15\text{ atm} \times 2.40\text{ L}}{3.45\text{ atm}}

Notice that 3.45 atm1.15 atm=3.00\frac{3.45\text{ atm}}{1.15\text{ atm}} = 3.00, meaning the pressure has tripled. Since volume varies inversely with pressure, the volume must decrease to one-third of its original value:

V2=2.40 L3=0.800 LV_2 = \frac{2.40\text{ L}}{3} = 0.800\text{ L}

Common Pitfall: Always verify that the units of pressure match before solving so they cancel out properly. Also, remember that increasing pressure must lead to a smaller volume; if your calculated volume is larger than the initial volume after a pressure increase, the ratio was inverted.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the pressure-volume relationship as direct rather than inverse, setting up V₁/P₁ = V₂/P₂ and calculating an incorrect volume of 7.20 L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V1P1=V2P2  ⟹  V2=V1×P2P1\frac{V_1}{P_1} = \frac{V_2}{P_2} \implies V_2 = \frac{V_1 \times P_2}{P_1}

    Correct

    P1V1=P2V2  ⟹  V2=P1V1P2P_1 V_1 = P_2 V_2 \implies V_2 = \frac{P_1 V_1}{P_2}

    At constant temperature and moles of gas (an isothermal process in a sealed container), pressure and volume follow Boyle's Law, where their product is constant (P1V1=P2V2P_1 V_1 = P_2 V_2). Setting up a direct proportion (V1P1=V2P2\frac{V_1}{P_1} = \frac{V_2}{P_2}) models a direct relationship, which would cause volume to expand when external pressure increases.

  2. Step 2

    V2=2.40×3.451.15=8.281.15=7.20 LV_2 = \frac{2.40 \times 3.45}{1.15} = \frac{8.28}{1.15} = 7.20\text{ L}

    Correct

    V2=1.15 atm×2.40 L3.45 atm=0.800 LV_2 = \frac{1.15\text{ atm} \times 2.40\text{ L}}{3.45\text{ atm}} = 0.800\text{ L}

    Your arithmetic was correctly evaluated based on your rearranged formula, but because the formula was inverted, your final volume tripled instead of decreasing to one-third of its initial value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly extracted the initial and final pressure and volume variables from the problem statement.

You showed clear algebraic rearrangement and carried out your arithmetic accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse vs. Direct Gas Law Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused Boyle's Law (P1V1=P2V2P_1 V_1 = P_2 V_2, an inverse relationship) with direct gas laws such as Charles's Law (V1T1=V2T2\frac{V_1}{T_1} = \frac{V_2}{T_2}), leading you to multiply by the pressure ratio rather than divide by it.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Proportionality from the Ideal Gas Law
  • Write PV=nRTPV = nRT. Variables on the same side of the equals sign have a constant product and are inversely proportional (P1V1=P2V2P_1 V_1 = P_2 V_2); variables on opposite sides have a constant ratio and are directly proportional (V1T1=V2T2\frac{V_1}{T_1} = \frac{V_2}{T_2}).

  • When temperature and moles are constant, use the product form P1V1=P2V2P_1 V_1 = P_2 V_2.

Physical Sanity Check
  • Compressing a gas by increasing the external pressure pushes the piston down, forcing the gas into a smaller volume.

  • Before finalizing your answer, verify that V2<V1V_2 < V_1 when P2>P1P_2 > P_1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State Boyle's Law for an isothermal process: P1V1=P2V2P_1 V_1 = P_2 V_2

  2. Isolate V2V_2: V2=P1V1P2V_2 = \frac{P_1 V_1}{P_2}

  3. Substitute the values: V2=1.15 atm×2.40 L3.45 atmV_2 = \frac{1.15\text{ atm} \times 2.40\text{ L}}{3.45\text{ atm}}

  4. Simplify the fraction: V2=2.763.45=0.800 LV_2 = \frac{2.76}{3.45} = 0.800\text{ L}

Final answer

0.800 L0.800\text{ L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between inverse (xy=kxy = k) and direct (y/x=ky/x = k) relationships across gas laws.

  • Practice a quick qualitative check on every gas problem: ask yourself whether the volume should expand or contract before calculating.

OverviewACEpath Teacher's Diagnosis

02 The student treats the target pressure as an added pressure rather than the final pressure, using P₂ = 1.15 + 3.45 = 4.60 atm to obtain 0.600 L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P2=1.15+3.45=4.60 atmP_2 = 1.15 + 3.45 = 4.60\text{ atm}

    Correct

    P2=3.45 atmP_2 = 3.45\text{ atm}

    The problem states that the external pressure was isothermally "increased to 3.45 atm3.45\text{ atm}," which means 3.45 atm3.45\text{ atm} is the final pressure P2P_2, not an added increment.

  2. Step 2

    P1V1=P2V2  ⟹  V2=P1V1P2P_1 V_1 = P_2 V_2 \implies V_2 = \frac{P_1 V_1}{P_2}

  3. Step 3

    V2=1.15×2.404.60V_2 = \frac{1.15 \times 2.40}{4.60}

    Correct

    V2=1.15 atm×2.40 L3.45 atmV_2 = \frac{1.15\text{ atm} \times 2.40\text{ L}}{3.45\text{ atm}}

    Your substitution followed the correct algebraic structure, but it inherited the incorrect value P2=4.60 atmP_2 = 4.60\text{ atm} from Step 1.

  4. Step 4

    V2=2.764.60=0.600 LV_2 = \frac{2.76}{4.60} = 0.600\text{ L}

    Correct

    V2=0.800 LV_2 = 0.800\text{ L}

    Your arithmetic was calculated accurately from your numbers, but the result is incorrect due to the initial value assigned to P2P_2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that Boyle's Law applies to an isothermal process involving a sealed gas.

You algebraically rearranged P1V1=P2V2P_1 V_1 = P_2 V_2 to isolate V2V_2 before substituting numerical values.

You performed the arithmetic accurately with the values you had set up.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misinterpreting 'increased to' as 'increased by'

You added 3.45 atm3.45\text{ atm} to the starting pressure of 1.15 atm1.15\text{ atm} instead of setting P2=3.45 atmP_2 = 3.45\text{ atm}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the prepositional meaning of 'increased to' (which gives the final value directly) with 'increased by' (which gives the change ΔP\Delta P that must be added to the initial value).

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish 'to' vs. 'by'
  • "Increased/decreased to XX" means X2=XX_2 = X. "Increased/decreased by XX" means ΔX=±X\Delta X = \pm X, so X2=X1±XX_2 = X_1 \pm X.

  • Circle the preposition connecting the change verb to the number before assigning your initial and final variables.

Sense-check the pressure ratio
  • For an isothermal process, volume scales inversely with pressure: V2V1=P1P2\frac{V_2}{V_1} = \frac{P_1}{P_2}.

  • Notice that 3.45 atm=3×1.15 atm3.45\text{ atm} = 3 \times 1.15\text{ atm}, so the pressure triples and the volume must be exactly one-third of the initial value: 2.40 L3=0.800 L\frac{2.40\text{ L}}{3} = 0.800\text{ L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the correct values P1=1.15 atmP_1 = 1.15\text{ atm}, V1=2.40 LV_1 = 2.40\text{ L}, and P2=3.45 atmP_2 = 3.45\text{ atm} into V2=P1V1P2V_2 = \frac{P_1 V_1}{P_2}:

  2. V2=1.15 atm×2.40 L3.45 atmV_2 = \frac{1.15\text{ atm} \times 2.40\text{ L}}{3.45\text{ atm}}

  3. Simplify the fraction: V2=2.763.45=0.800 LV_2 = \frac{2.76}{3.45} = 0.800\text{ L}.

Final answer

0.800 L0.800\text{ L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Read the wording of word problems closely to confirm whether a given quantity represents the final state or the magnitude of a change.

  • Practice using the ratio shortcut when variables are integer multiples (e.g., pressure tripling implies volume dropping to one-third).

OverviewACEpath Teacher's Diagnosis

03 The student inverts the pressure ratio when solving Boyle's Law, calculating V₂ = (P₂V₁)/P₁ and resulting in 7.20 L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P1V1=P2V2P_1 V_1 = P_2 V_2

  2. Step 2

    V2=P2×V1P1V_2 = \frac{P_2 \times V_1}{P_1}

    Correct

    V2=P1V1P2V_2 = \frac{P_1 V_1}{P_2}

    To isolate V2V_2 from P1V1=P2V2P_1 V_1 = P_2 V_2, you must divide both sides by P2P_2, which yields V2=P1V1P2V_2 = \frac{P_1 V_1}{P_2} rather than P2V1P1\frac{P_2 V_1}{P_1}.

  3. Step 3

    V2=3.45×2.401.15V_2 = \frac{3.45 \times 2.40}{1.15}

    Correct

    V2=1.15×2.403.45V_2 = \frac{1.15 \times 2.40}{3.45}

    You substituted your values into the inverted formula obtained in Step 2.

  4. Step 4

    V2=7.20 LV_2 = 7.20\text{ L}

    Correct

    V2=0.800 LV_2 = 0.800\text{ L}

    This numerical result follows directly from the rearranged expression in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the isothermal compression of an ideal gas follows Boyle's Law, P1V1=P2V2P_1 V_1 = P_2 V_2.

You correctly matched each given numerical value to its corresponding variable.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error (inverted ratio)

You accidentally placed P2P_2 in the numerator and P1P_1 in the denominator when isolating V2V_2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the inverse proportionality relationship algebraically, treating volume as directly proportional to pressure rather than inversely proportional. A quick physical check confirms that increasing pressure must compress the gas into a smaller volume, not expand it from 2.40 L2.40\text{ L} to 7.20 L7.20\text{ L}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating Variables in Inverse Proportions
  • To solve for an unknown in A1B1=A2B2A_1 B_1 = A_2 B_2, divide both sides by the partner of the unknown variable: B2=A1B1A2B_2 = \frac{A_1 B_1}{A_2}.

  • Divide both sides of P1V1=P2V2P_1 V_1 = P_2 V_2 by P2P_2 so that P2P_2 cancels on the right-hand side.

Physical Sanity Check for Boyle's Law
  • Pressure and volume vary inversely (P∝1VP \propto \frac{1}{V}). An increase in pressure (P2>P1P_2 > P_1) must always result in a decrease in volume (V2<V1V_2 < V_1).

  • Compare your final volume with the initial volume: if pressure increased by a factor of 33, your final volume must decrease by a factor of 33.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from Boyle's Law: P1V1=P2V2P_1 V_1 = P_2 V_2.

  2. Divide both sides by P2P_2: V2=P1V1P2V_2 = \frac{P_1 V_1}{P_2}.

  3. Substitute the given values: V2=(1.15 atm)(2.40 L)3.45 atmV_2 = \frac{(1.15\text{ atm})(2.40\text{ L})}{3.45\text{ atm}}.

  4. Simplify the ratio 1.153.45=13\frac{1.15}{3.45} = \frac{1}{3}: V2=2.40 L3=0.800 LV_2 = \frac{2.40\text{ L}}{3} = 0.800\text{ L}.

Final answer

0.800 L0.800\text{ L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables in product formulas (A1B1=A2B2A_1 B_1 = A_2 B_2) by showing the division step explicitly.

  • Perform a conceptual sanity check before finalizing your answer: verify whether the volume should expand or compress.

Lock it in

Similar question

01

A sample of argon gas has a volume of 4.50 L4.50\text{ L} at a pressure of 740 mmHg740\text{ mmHg} and 25∘C25^\circ\text{C}. What is the volume of the gas in liters if the pressure is increased to 1110 mmHg1110\text{ mmHg} at constant temperature?

Answer

3.00 L3.00\text{ L}. Using Boyle's Law, P1V1=P2V2P_1 V_1 = P_2 V_2, so V2=P1V1P2=740 mmHg×4.50 L1110 mmHg=3.00 LV_2 = \frac{P_1 V_1}{P_2} = \frac{740\text{ mmHg} \times 4.50\text{ L}}{1110\text{ mmHg}} = 3.00\text{ L}.

02

A weather balloon contains 15.0 L15.0\text{ L} of helium at sea level where the pressure is 1.00 atm1.00\text{ atm}. It rises to an altitude where the volume expands to 40.0 L40.0\text{ L} while temperature remains constant. Calculate the external atmospheric pressure in atmospheres at this altitude.

Answer

0.375 atm0.375\text{ atm}. Using Boyle's Law, P2=P1V1V2=1.00 atm×15.0 L40.0 L=0.375 atmP_2 = \frac{P_1 V_1}{V_2} = \frac{1.00\text{ atm} \times 15.0\text{ L}}{40.0\text{ L}} = 0.375\text{ atm}.

03

A cylinder with a movable piston contains 500 mL500\text{ mL} of gas at 1.20 atm1.20\text{ atm}. The piston is compressed until the volume is reduced by 60%60\%. Assuming constant temperature, calculate the final pressure inside the cylinder in atmospheres.

Answer

3.00 atm3.00\text{ atm}. A 60%60\% reduction leaves a final volume of V2=500 mL×(1−0.60)=200 mLV_2 = 500\text{ mL} \times (1 - 0.60) = 200\text{ mL}. Applying Boyle's Law: P2=P1V1V2=1.20 atm×500 mL200 mL=3.00 atmP_2 = \frac{P_1 V_1}{V_2} = \frac{1.20\text{ atm} \times 500\text{ mL}}{200\text{ mL}} = 3.00\text{ atm}.

Loading workspace…