Resources
A miniature chemical microreactor contains of an expanding reactant gas. During a reaction step, the gas expands by against a constant atmospheric pressure of , while of heat is simultaneously lost through the microchannel walls to the heat sink. Convert all parameters into consistent SI units to calculate the work (in ) performed by/on the system and the net change in internal energy (in ).
Answer and steps
Final answer
,
Steps
Step 1: Convert all quantities to base SI units
To calculate expansion work in joules (), convert pressure to pascals () and volume change to cubic meters ():
- External pressure ():
- Change in volume (): Since the gas is expanding, is positive:
- Heat (): Heat is released (lost) by the system to the surroundings, so by thermodynamic sign convention, is negative:
Step 2: Calculate expansion work ()
Pressure-volume work against a constant external pressure is defined as:
Substitute the SI values into the formula:
Convert the work into millijoules (), where :
Pitfall note: Because the gas expands against the surroundings, work is done by the system, making negative under the standard IUPAC convention ().
Step 3: Calculate the change in internal energy ()
According to the First Law of Thermodynamics, the change in internal energy of a closed system is:
Substitute the values of and expressed in millijoules:
Rounding to three significant figures gives:
Typical errors
01 The student omits the negative sign in the thermodynamic definition of work during expansion, calculating positive work done on the system.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You converted pressure to pascals and volume to cubic meters accurately, but under the IUPAC thermodynamic sign convention, pressure-volume work is defined as . Because the gas expands (), work is done by the system on the surroundings, meaning energy leaves the system and must be negative.
- Step 2Correct
You correctly stated the First Law of Thermodynamics and assigned the correct negative sign to heat lost (). However, substituting your positive work value from Step 1 caused the resulting to have the incorrect sign and magnitude.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted pressure from to and volume from to without any unit errors.
You correctly identified that heat lost to the surroundings requires a negative sign ().
You correctly used the First Law equation .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of for the work of gas expansion.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated work as an absolute mechanical quantity () rather than applying the system-centric thermodynamic definition , where expansion transfers energy out of the system.
REASONING PATH
Your ACEpath teacher’s suggested approach- Thermodynamic Work Definition
In chemistry (IUPAC convention), work done on or by a gas is given by .
Always write down the formula with the explicit negative sign before substituting numerical values.
- Physical Direction of Energy Flow
Expansion () means the system pushes against the surroundings and loses energy, so . Compression () adds energy to the system, so .
Check the sign of against physical intuition: if the system expands, verify that is negative.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate expansion work using the IUPAC convention: .
Substitute and into .
Compute .
,
02 The student treats heat lost to the surroundings as a positive quantity instead of negative when calculating the internal energy change.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You treated the heat transfer as positive. Because the problem states that heat is lost by the system to the heat sink, energy leaves the system, so must be negative by thermodynamic convention ().
- Step 3Correct
You correctly stated and applied the First Law formula , but the result was altered by the sign error in from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the formula for expansion work against constant pressure.
You performed accurate unit conversions for pressure from to and volume from to .
You correctly stated the First Law of Thermodynamics as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted the negative sign on despite identifying that heat was lost from the system.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou interpreted the stated magnitude of transferred heat as a positive scalar rather than assigning a sign from the system's perspective, where heat released or lost to the surroundings requires .
REASONING PATH
Your ACEpath teacher’s suggested approach- Heat sign convention
Heat absorbed by the system is positive (); heat released or lost by the system to the surroundings is negative ().
Always read 'heat lost' or 'heat released' as an outflow of internal energy, and prepend a minus sign to the given numerical value.
- Significant figures
Round the final thermodynamic quantities to the limiting number of significant figures provided in the problem prompt.
Round and to three significant figures: and .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet because energy is transferred out of the system into the heat sink.
Substitute and into .
Calculate .
Round both values to three significant figures.
,
03 The student incorrectly converts cubic centimeters to cubic meters using a factor of 10⁻² instead of 10⁻⁶, leading to an incorrect work and internal energy change.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When converting units of volume, you must cube the linear scale factor: , so .
- Step 3Correct
Your arithmetic evaluation and conversion from joules to millijoules followed correctly from your previous value, but the number is incorrect due to the volume unit conversion error.
- Step 4Correct
You correctly stated the First Law of Thermodynamics and assigned the correct negative sign for lost heat, but the final sum carried forward the inflated value of .
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct expansion work formula .
You correctly assigned a negative sign to heat lost by the system ().
You correctly stated and applied the First Law of Thermodynamics, .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated cubic centimeters as if they scaled linearly with meters by , omitting the required exponent of on the prefix factor.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisForgetting that dimensional prefixes must be raised to the power of the derived dimension (for volume, ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Cubing Dimensional Prefixes
For any unit with a prefix raised to power , .
Always write out before substituting volume into SI formulas.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert volume change using the cubic factor: .
Compute expansion work in joules: .
Convert to millijoules: .
Sum heat and work for internal energy: .
,
Lock it in
What is the standard IUPAC formula for pressure-volume work at constant external pressure?
. The negative sign ensures that work done by the system during expansion () decreases the system's internal energy ().
Similar question
A gas cylinder expands from to against a constant external pressure of . Calculate the work done in joules ().
Answer
. Key steps: . Using . Converting gives .
During a chemical reaction in a piston-cylinder setup, the system absorbs of heat while expanding by against a constant atmospheric pressure of . Calculate the net change in internal energy of the system in joules.
Answer
. Key steps: . With heat absorbed, . Then .
An ideal gas system undergoes compression, reducing its volume by under a constant opposing pressure of . Simultaneously, the system releases of heat to the surroundings. Calculate and in joules.
Answer
, . Key steps: . Then . Heat released means . Thus .