Resources

A concentration cell at 298 K298\text{ K} consists of two nickel electrodes: Compartment A contains Ni(s)\text{Ni}(s) in [Ni2+]=0.010 M[\text{Ni}^{2+}] = 0.010\text{ M}, and Compartment B contains Ni(s)\text{Ni}(s) in [Ni2+]=CB[\text{Ni}^{2+}] = C_B. (a) Determine which compartment serves as the anode. (b) Calculate the critical threshold concentration CBC_B required in Compartment B such that the spontaneous cell potential is exactly Ecell=+0.0592 VE_{\text{cell}} = +0.0592\text{ V} (assume the standard Nernst factor 2.303RTF=0.0592 V\frac{2.303RT}{F} = 0.0592\text{ V} and n=2n = 2).

Answer and steps

Final answer

(a) Compartment A ([Ni2+]=0.010 M[\text{Ni}^{2+}] = 0.010\text{ M}) is the anode; (b) CB=1.0 MC_B = 1.0\text{ M} (or 1.00 M1.00\text{ M}).

Steps

Part (a): Identifying the Anode

A concentration cell consists of two identical half-cells with different ion concentrations. To achieve equilibrium spontaneously, the system drives concentrations toward equality:

  • The half-cell with the lower ion concentration undergoes oxidation to generate more cations: Ni(s)⟶NiX2+(aq)+2e−\ce{Ni}(s) \longrightarrow \ce{Ni^{2+}}(aq) + 2e^{-} Oxidation occurs at the anode, meaning the more dilute compartment is always the anode.
  • The half-cell with the higher ion concentration undergoes reduction to consume cations: NiX2+(aq)+2e−⟶Ni(s)\ce{Ni^{2+}}(aq) + 2e^{-} \longrightarrow \ce{Ni}(s) Reduction occurs at the cathode.

Because a spontaneous cell potential (Ecell=+0.0592 V>0E_{\text{cell}} = +0.0592\text{ V} > 0) requires the reaction to proceed forward, Compartment A ([Ni2+]=0.010 M[\ce{Ni}^{2+}] = 0.010\text{ M}) serves as the anode, and Compartment B serves as the cathode (meaning CB>0.010 MC_B > 0.010\text{ M}).


Part (b): Calculating the Concentration CBC_B

  1. Cell Potential and Reaction Quotient: For any concentration cell made of identical electrodes, the standard cell potential is zero: Ecell∘=0 VE^\circ_{\text{cell}} = 0\text{ V}

    The overall cell reaction is: NiX2+(aq, cathode)⟶NiX2+(aq, anode)\ce{Ni^{2+}}(aq,\text{ cathode}) \longrightarrow \ce{Ni^{2+}}(aq,\text{ anode})

    The reaction quotient QQ is: Q=[Ni2+]anode[Ni2+]cathode=0.010CBQ = \frac{[\ce{Ni}^{2+}]_{\text{anode}}}{[\ce{Ni}^{2+}]_{\text{cathode}}} = \frac{0.010}{C_B}

  2. Apply the Nernst Equation: Using n=2n = 2 and 2.303RTF=0.0592 V\frac{2.303RT}{F} = 0.0592\text{ V} at 298 K298\text{ K}: Ecell=Ecell∘−0.0592nlog⁡QE_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592}{n}\log Q Ecell=0−0.05922log⁡(0.010CB)=0.05922log⁡(CB0.010)E_{\text{cell}} = 0 - \frac{0.0592}{2}\log\left(\frac{0.010}{C_B}\right) = \frac{0.0592}{2}\log\left(\frac{C_B}{0.010}\right)
  3. Solve for CBC_B: Substitute the required spontaneous cell potential Ecell=+0.0592 VE_{\text{cell}} = +0.0592\text{ V}: 0.0592=0.05922log⁡(CB0.010)0.0592 = \frac{0.0592}{2}\log\left(\frac{C_B}{0.010}\right)

    Divide both sides by 0.05920.0592: 1=12log⁡(CB0.010)1 = \frac{1}{2}\log\left(\frac{C_B}{0.010}\right) log⁡(CB0.010)=2\log\left(\frac{C_B}{0.010}\right) = 2

    Convert from logarithmic to exponential form: CB0.010=102=100\frac{C_B}{0.010} = 10^2 = 100 CB=100⋅0.010 M=1.0 MC_B = 100 \cdot 0.010\text{ M} = 1.0\text{ M}

Common Pitfall: Inverting the quotient QQ (placing cathode concentration over anode concentration inside the negative Nernst term) leads to a sign error and an incorrect concentration less than 0.010 M0.010\text{ M}, which would correspond to a non-spontaneous cell. Always verify that [Ni2+]cathode>[Ni2+]anode[\ce{Ni}^{2+}]_{\text{cathode}} > [\ce{Ni}^{2+}]_{\text{anode}} when Ecell>0E_{\text{cell}} > 0.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the reaction quotient in the Nernst equation by defining Q as cathode over anode concentration, leading to an incorrect concentration of 0.00010 M.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Compartment A is the anode because oxidation occurs in the more dilute compartment.

  2. Step 2

    Ecell=−(0.05922)log⁡(CB/0.010)E_{\text{cell}} = -\left(\frac{0.0592}{2}\right) \log(C_B / 0.010)

    Correct

    Ecell=−(0.05922)log⁡(0.010CB)E_{\text{cell}} = -\left(\frac{0.0592}{2}\right) \log\left(\frac{0.010}{C_B}\right)

    The overall spontaneous cell reaction is NiX2+(cathode)⟶NiX2+(anode)\ce{Ni^{2+}}(\text{cathode}) \longrightarrow \ce{Ni^{2+}}(\text{anode}). Therefore, the reaction quotient must be Q=[NiX2+]anode[NiX2+]cathode=0.010CBQ = \frac{[\ce{Ni^{2+}}]_{\text{anode}}}{[\ce{Ni^{2+}}]_{\text{cathode}}} = \frac{0.010}{C_B}. You inverted the ratio by placing the cathode concentration in the numerator.

  3. Step 3

    0.0592=−0.0296log⁡(CB/0.010)  ⟹  log⁡(CB/0.010)=−2  ⟹  CB0.010=0.010  ⟹  CB=0.00010 M0.0592 = -0.0296 \log(C_B / 0.010) \implies \log(C_B / 0.010) = -2 \implies \frac{C_B}{0.010} = 0.010 \implies C_B = 0.00010\text{ M}

    Correct

    0.0592=−0.0296log⁡(0.010CB)  ⟹  log⁡(0.010CB)=−2  ⟹  0.010CB=0.010  ⟹  CB=1.0 M0.0592 = -0.0296 \log\left(\frac{0.010}{C_B}\right) \implies \log\left(\frac{0.010}{C_B}\right) = -2 \implies \frac{0.010}{C_B} = 0.010 \implies C_B = 1.0\text{ M}

    Your algebraic solving steps were carried out consistently with your inverted formula, but because QQ was upside down, your final concentration resulted in CB=0.00010 MC_B = 0.00010\text{ M} rather than 1.0 M1.0\text{ M}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the more dilute half-cell undergoes oxidation and acts as the anode.

You selected the correct form of the Nernst equation at 298 K298\text{ K} with n=2n = 2 and Ecell∘=0 VE^\circ_{\text{cell}} = 0\text{ V}.

You solved the logarithmic equation algebraically without arithmetic slips.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Reaction Quotient in Nernst Equation

You set the reaction quotient QQ equal to [cathode][anode]\frac{[\text{cathode}]}{[\text{anode}]} instead of [anode][cathode]\frac{[\text{anode}]}{[\text{cathode}]}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In concentration cells, students often substitute concentrations into the Nernst equation by habit without writing out the net chemical equation: ions are products at the anode and reactants at the cathode, so Q=[dilute][concentrated]Q = \frac{[\text{dilute}]}{[\text{concentrated}]}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Net Cell Reaction
  • Oxidation produces anode ions and reduction consumes cathode ions: MXn+(conc, cathode)⟶MXn+(dilute, anode)\ce{M^{n+}}(\text{conc, cathode}) \longrightarrow \ce{M^{n+}}(\text{dilute, anode}).

  • Always write Q=[anode][cathode]=[dilute][concentrated]Q = \frac{[\text{anode}]}{[\text{cathode}]} = \frac{[\text{dilute}]}{[\text{concentrated}]} before plugging values into E=−0.0592nlog⁡QE = -\frac{0.0592}{n}\log Q.

Spontaneity Sanity Check
  • For a spontaneous cell (Ecell>0E_{\text{cell}} > 0), QQ must be less than 11, meaning [anode]<[cathode][\text{anode}] < [\text{cathode}].

  • After solving, verify that your calculated cathode concentration is strictly greater than the anode concentration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the Nernst equation with the correct quotient: Ecell=Ecell∘−0.05922log⁡([NiX2+]anode[NiX2+]cathode)E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592}{2}\log\left(\frac{[\ce{Ni^{2+}}]_{\text{anode}}}{[\ce{Ni^{2+}}]_{\text{cathode}}}\right).

  2. Substitute Ecell=+0.0592 VE_{\text{cell}} = +0.0592\text{ V}, Ecell∘=0 VE^\circ_{\text{cell}} = 0\text{ V}, and [NiX2+]anode=0.010 M[\ce{Ni^{2+}}]_{\text{anode}} = 0.010\text{ M}: 0.0592=−0.0296log⁡(0.010CB)0.0592 = -0.0296\log\left(\frac{0.010}{C_B}\right).

  3. Divide by −0.0296-0.0296: log⁡(0.010CB)=−2\log\left(\frac{0.010}{C_B}\right) = -2.

  4. Convert from logarithmic to exponential form: 0.010CB=10−2=0.010\frac{0.010}{C_B} = 10^{-2} = 0.010.

  5. Solve for CBC_B: CB=0.0100.010=1.0 MC_B = \frac{0.010}{0.010} = 1.0\text{ M}.

Final answer

CB=1.0 MC_B = 1.0\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the half-reactions and the net ionic equation explicitly to verify which concentration represents the product.

  • Check that Q<1Q < 1 whenever Ecell>0E_{\text{cell}} > 0 for a concentration cell.

  • Complete the follow-up flashcards and practice problems to lock in setting up QQ correctly.

OverviewACEpath Teacher's Diagnosis

02 The student omits the number of electrons transferred (n = 2) in the Nernst equation, resulting in an incorrect concentration of 0.10 M.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Compartment A is the anode because the lower concentration compartment oxidizes.

  2. Step 2

    Ecell=−0.0592×log⁡(0.010/CB)  ⟹  0.0592=−0.0592×log⁡(0.010/CB)E_{\text{cell}} = -0.0592 \times \log(0.010/C_B) \implies 0.0592 = -0.0592 \times \log(0.010/C_B)

    Correct

    Ecell=−0.0592nlog⁡(0.010CB)=−0.05922log⁡(0.010CB)E_{\text{cell}} = -\frac{0.0592}{n}\log\left(\frac{0.010}{C_B}\right) = -\frac{0.0592}{2}\log\left(\frac{0.010}{C_B}\right)

    You used 0.05920.0592 instead of 0.0592n\frac{0.0592}{n}. Since the redox reaction involves Ni2++2e−⇌Ni(s)\text{Ni}^{2+} + 2e^- \rightleftharpoons \text{Ni}(s), two moles of electrons are transferred per mole of reaction, so n=2n = 2.

  3. Step 3

    log⁡(0.010/CB)=−1  ⟹  0.010/CB=0.10  ⟹  CB=0.10 M\log(0.010/C_B) = -1 \implies 0.010/C_B = 0.10 \implies C_B = 0.10\text{ M}

    Correct

    log⁡(0.010CB)=−2  ⟹  0.010CB=10−2=0.010  ⟹  CB=1.0 M\log\left(\frac{0.010}{C_B}\right) = -2 \implies \frac{0.010}{C_B} = 10^{-2} = 0.010 \implies C_B = 1.0\text{ M}

    Your algebraic steps and logarithm inversion were logically carried out from your equation, but the final numerical value is affected by the missing factor of n=2n = 2 in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the lower concentration half-cell undergoes oxidation and therefore functions as the anode.

You set up the reaction quotient Q=[Ni2+]dilute[Ni2+]concentrated=0.010CBQ = \frac{[\text{Ni}^{2+}]_{\text{dilute}}}{[\text{Ni}^{2+}]_{\text{concentrated}}} = \frac{0.010}{C_B} with the correct anode-over-cathode ratio.

You solved the resulting logarithmic equation with accurate algebra.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of moles of electrons transferred (n) in Nernst equation

You omitted the denominator n=2n = 2 from the Nernst slope term, using −0.0592log⁡Q-0.0592\log Q instead of −0.05922log⁡Q-\frac{0.0592}{2}\log Q.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the simplified single-electron form (n=1n = 1) of the Nernst equation with the general equation Ecell=E∘−0.0592nlog⁡QE_{\text{cell}} = E^\circ - \frac{0.0592}{n}\log Q.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify moles of electrons transferred
  • For a metal ion half-reaction Mn++ne−⟶M(s)\text{M}^{n+} + ne^- \longrightarrow \text{M}(s), nn is the charge of the cation.

  • Check the oxidation state change in the half-reaction (here Ni2+→Ni\text{Ni}^{2+} \to \text{Ni}, so n=2n = 2) before applying the Nernst prefactor.

Nernst slope factor
  • At 298 K298\text{ K}, the prefactor is 0.0592 Vn\frac{0.0592\text{ V}}{n}, not simply 0.0592 V0.0592\text{ V}.

  • Always write 0.0592n\frac{0.0592}{n} explicitly in your first line of working to prevent dropping nn during substitutions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the Nernst equation: Ecell=−0.05922log⁡(0.010CB)E_{\text{cell}} = -\frac{0.0592}{2}\log\left(\frac{0.010}{C_B}\right)

  2. Substitute Ecell=0.0592 VE_{\text{cell}} = 0.0592\text{ V}: 0.0592=−0.0296log⁡(0.010CB)0.0592 = -0.0296\log\left(\frac{0.010}{C_B}\right)

  3. Divide both sides by −0.0296-0.0296: log⁡(0.010CB)=−2\log\left(\frac{0.010}{C_B}\right) = -2

  4. Convert from logarithmic to exponential form: 0.010CB=10−2=0.010\frac{0.010}{C_B} = 10^{-2} = 0.010

  5. Solve for CBC_B: CB=0.0100.010=1.0 MC_B = \frac{0.010}{0.010} = 1.0\text{ M}

Final answer

(a) Compartment A is the anode; (b) CB=1.0 MC_B = 1.0\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • When using the Nernst equation, always explicitly balance the half-reaction first to write down the exact value of nn.

  • Double-check that the calculated concentration yields a spontaneous potential: here CB=1.0 M>0.010 MC_B = 1.0\text{ M} > 0.010\text{ M}, which correctly drives cations from concentrated to dilute.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the more concentrated compartment as the anode, concluding that Compartment B is the anode and Compartment A is the cathode.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Compartment B serves as the anode because oxidation occurs at the higher concentration.

    Correct

    Compartment A is the anode ([Ni2+]=0.010 M[\text{Ni}^{2+}] = 0.010\text{ M}) because spontaneous oxidation occurs in the more dilute solution to increase ion concentration toward equilibrium.

    In a spontaneous concentration cell, the driving force is to equalize concentrations. Oxidation (Ni(s)⟶Ni2++2e−\text{Ni}(s) \longrightarrow \text{Ni}^{2+} + 2e^-) occurs at the anode to produce cations in the more dilute compartment, so the dilute compartment (Compartment A) must be the anode.

  2. Step 2

    E_{cell\text{cell}} = -(0.05922)\left(\frac{0.0592}{2}\right) ⋅\cdot \log(C_B / 0.010)   ⟹  \implies 0.0592 = -0.0296 ⋅\cdot \log(C_B / 0.010)_

    Correct

    E_{cell\text{cell}} = -0.05922\frac{0.0592}{2}\log Q = -0.05922\frac{0.0592}{2}\log([Ni2+]anode[Ni2+]cathode)\left(\frac{[\text{Ni}^{2+}]_{\text{anode}}}{[\text{Ni}^{2+}]_{\text{cathode}}}\right) = -0.05922\frac{0.0592}{2}\log(0.010CB)\left(\frac{0.010}{C_B}\right)_

    Because you identified Compartment B as the anode, you placed CBC_B in the numerator of the reaction quotient Q=[anode][cathode]Q = \frac{[\text{anode}]}{[\text{cathode}]}. With Compartment A as the anode, the numerator should be 0.010 M0.010\text{ M} and the denominator should be CBC_B.

  3. Step 3

    \log(C_B / 0.010) = -2   ⟹  \implies C_B / 0.010 = 0.01   ⟹  \implies C_B = 0.00010 M\text{ M}

    Correct

    \log(0.010CB)\left(\frac{0.010}{C_B}\right) = -2   ⟹  \implies 0.010CB\frac{0.010}{C_B} = 10^{-2} = 0.01   ⟹  \implies C_B = 0.0100.01\frac{0.010}{0.01} = 1.0 M\text{ M}

    Your algebraic steps to solve for the unknown concentration were completely sound, but propagating the inverted quotient produced CB=0.00010 MC_B = 0.00010\text{ M} instead of CB=1.0 MC_B = 1.0\text{ M}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the Nernst equation with n=2n = 2 and recognized that Ecell∘=0 VE^\circ_{\text{cell}} = 0\text{ V} for a concentration cell.

You accurately manipulated the logarithmic relationship to solve for your variable without making calculation slips.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Concentration cell anode/cathode misidentification

No arithmetic slip occurred; this is a conceptual reversal of where oxidation occurs in a concentration cell.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You believed that oxidation occurs at the more concentrated compartment rather than the more dilute compartment. In any galvanic cell, reactions proceed spontaneously toward equilibrium, which means the dilute side must generate ions (oxidation at the anode) while the concentrated side consumes ions (reduction at the cathode).

REASONING PATH
Your ACEpath teacher’s suggested approach
Anode in a Concentration Cell
  • For a spontaneous concentration cell (Ecell>0E_{\text{cell}} > 0), [cation]anode<[cation]cathode[\text{cation}]_{\text{anode}} < [\text{cation}]_{\text{cathode}}.

  • Always assign the more dilute solution to the anode (Q=[dilute][concentrated]<1Q = \frac{[\text{dilute}]}{[\text{concentrated}]} < 1).

Sign of Reaction Quotient Logarithm
  • Because Ecell=−0.0592nlog⁡QE_{\text{cell}} = -\frac{0.0592}{n}\log Q, a positive cell potential requires log⁡Q<0\log Q < 0, which means Q<1Q < 1.

  • Check that your reaction quotient Q=[anode][cathode]Q = \frac{[\text{anode}]}{[\text{cathode}]} is less than 11 whenever Ecell>0E_{\text{cell}} > 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the anode as Compartment A, so [Ni2+]anode=0.010 M[\text{Ni}^{2+}]_{\text{anode}} = 0.010\text{ M} and [Ni2+]cathode=CB[\text{Ni}^{2+}]_{\text{cathode}} = C_B.

  2. Set up the reaction quotient: Q=[Ni2+]anode[Ni2+]cathode=0.010CBQ = \frac{[\text{Ni}^{2+}]_{\text{anode}}}{[\text{Ni}^{2+}]_{\text{cathode}}} = \frac{0.010}{C_B}.

  3. Substitute into the Nernst equation: 0.0592=−0.05922log⁡(0.010CB)0.0592 = -\frac{0.0592}{2}\log\left(\frac{0.010}{C_B}\right).

  4. Divide by −0.0296-0.0296: log⁡(0.010CB)=−2\log\left(\frac{0.010}{C_B}\right) = -2.

  5. Convert to exponential form: 0.010CB=10−2=0.01\frac{0.010}{C_B} = 10^{-2} = 0.01.

  6. Solve for CBC_B: CB=0.0100.01=1.0 MC_B = \frac{0.010}{0.01} = 1.0\text{ M}.

Final answer

(a) Compartment A is the anode; (b) CB=1.0 MC_B = 1.0\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical mechanism of concentration cells: dilute solutions undergo oxidation to gain ions, while concentrated solutions undergo reduction to lose ions.

  • Before solving, write down Q=[dilute][concentrated]Q = \frac{[\text{dilute}]}{[\text{concentrated}]} to guarantee that Q<1Q < 1 and Ecell>0E_{\text{cell}} > 0.

Lock it in

Similar question

01

A concentration cell consists of two copper electrodes in solutions of CuX2+\ce{Cu^{2+}}. Compartment 1 has [CuX2+]=0.0020 M[\ce{Cu^{2+}}] = 0.0020\text{ M} and Compartment 2 has [CuX2+]=0.20 M[\ce{Cu^{2+}}] = 0.20\text{ M} at 298 K298\text{ K}. Calculate the spontaneous cell potential EcellE_{\text{cell}} using 2.303RTF=0.0592 V\frac{2.303RT}{F} = 0.0592\text{ V} and n=2n = 2.

Answer

Ecell=+0.0592 VE_{\text{cell}} = +0.0592\text{ V}. Key steps: Dilute compartment is anode, so Q=[CuX2+]anode[CuX2+]cathode=0.00200.20=10−2Q = \frac{[\ce{Cu^{2+}}]_{\text{anode}}}{[\ce{Cu^{2+}}]_{\text{cathode}}} = \frac{0.0020}{0.20} = 10^{-2}. Then Ecell=0−0.05922log⁡(10−2)=−0.0296(−2)=+0.0592 VE_{\text{cell}} = 0 - \frac{0.0592}{2}\log(10^{-2}) = -0.0296(-2) = +0.0592\text{ V}.

02

A zinc concentration cell operates at 298 K298\text{ K} with [extZn2+]=0.050 M[ ext{Zn}^{2+}] = 0.050\text{ M} at the anode. What cathode concentration [extZn2+][ ext{Zn}^{2+}] is required to yield a cell potential of Ecell=+0.0296 VE_{\text{cell}} = +0.0296\text{ V}? (Assume n=2n = 2 and 2.303RTF=0.0592 V\frac{2.303RT}{F} = 0.0592\text{ V}).

Answer

[ZnX2+]cathode=0.50 M[\ce{Zn^{2+}}]_{\text{cathode}} = 0.50\text{ M}. Key steps: Ecell=−0.05922log⁡(0.050Ccat)=0.0296 V  ⟹  log⁡(0.050Ccat)=−1  ⟹  0.050Ccat=0.10  ⟹  Ccat=0.50 ME_{\text{cell}} = -\frac{0.0592}{2}\log\left(\frac{0.050}{C_{\text{cat}}}\right) = 0.0296\text{ V} \implies \log\left(\frac{0.050}{C_{\text{cat}}}\right) = -1 \implies \frac{0.050}{C_{\text{cat}}} = 0.10 \implies C_{\text{cat}} = 0.50\text{ M}.

03

A concentration cell has two silver electrodes (extAg+/Ag ext{Ag}^+/\text{Ag}, where n=1n = 1). Compartment X contains 0.0050 M Ag+0.0050\text{ M } \text{Ag}^+ and Compartment Y contains an unknown concentration CYC_Y. If the measured potential is +0.1184 V+0.1184\text{ V} at 298 K298\text{ K} and Compartment X is confirmed to be the anode, find CYC_Y. (Use 2.303RTF=0.0592 V\frac{2.303RT}{F} = 0.0592\text{ V}).

Answer

CY=0.50 MC_Y = 0.50\text{ M}. Key steps: Ecell=−0.05921log⁡(0.0050CY)=0.1184 V  ⟹  log⁡(0.0050CY)=−2  ⟹  0.0050CY=10−2=0.010  ⟹  CY=0.00500.010=0.50 ME_{\text{cell}} = -\frac{0.0592}{1}\log\left(\frac{0.0050}{C_Y}\right) = 0.1184\text{ V} \implies \log\left(\frac{0.0050}{C_Y}\right) = -2 \implies \frac{0.0050}{C_Y} = 10^{-2} = 0.010 \implies C_Y = \frac{0.0050}{0.010} = 0.50\text{ M}.

Loading workspace…