Resources

A student assumes that because the energy difference between consecutive levels ΔEn→n−1\Delta E_{n \to n-1} decreases as nn increases, the wavelength difference Δλ\Delta \lambda between consecutive spectral lines in an emission series must also decrease proportionally. (a) For the Lyman series (nf=1n_f = 1), calculate the exact emission wavelengths λ2→1\lambda_{2 \to 1}, λ3→1\lambda_{3 \to 1}, and λ4→1\lambda_{4 \to 1} in nanometers. (b) Contrast the wavelength spacing (λ2→1−λ3→1)(\lambda_{2 \to 1} - \lambda_{3 \to 1}) versus (λ3→1−λ4→1)(\lambda_{3 \to 1} - \lambda_{4 \to 1}), and explain conceptually why spectral lines crowd closer together at shorter wavelengths rather than spreading out.

Answer and steps

Final answer

(a) λ2→1=121.6 nm\lambda_{2 \to 1} = 121.6\text{ nm}, λ3→1=102.6 nm\lambda_{3 \to 1} = 102.6\text{ nm}, λ4→1=97.25 nm\lambda_{4 \to 1} = 97.25\text{ nm}; (b) Difference λ2→1−λ3→1=19.0 nm\lambda_{2 \to 1} - \lambda_{3 \to 1} = 19.0\text{ nm}, whereas λ3→1−λ4→1=5.35 nm\lambda_{3 \to 1} - \lambda_{4 \to 1} = 5.35\text{ nm}; because λ=hcΔE\lambda = \frac{hc}{\Delta E}, as ΔE\Delta E approaches the series continuum limit, 1ΔE\frac{1}{\Delta E} changes progressively less per step, causing the spectral lines to bunch tightly together toward the series convergence limit.

Steps

Part (a): Calculating the Lyman Series Emission Wavelengths

The wavelengths of emission lines in the hydrogen spectrum are given by the Rydberg formula:

1λ=RH(1nf2−1ni2)\frac{1}{\lambda} = R_{\text{H}} \left(\frac{1}{n_{\text{f}}^2} - \frac{1}{n_{\text{i}}^2}\right)

where the Rydberg constant is RH≈1.097×107 m−1=0.01097 nm−1R_{\text{H}} \approx 1.097 \times 10^7 \text{ m}^{-1} = 0.01097 \text{ nm}^{-1}, and for the Lyman series, the final lower energy level is nf=1n_{\text{f}} = 1.

  1. Transition from n=2→1n = 2 \to 1:

    1λ2→1=1.097×107 m−1(112−122)=1.097×107×34=8.228×106 m−1\frac{1}{\lambda_{2 \to 1}} = 1.097 \times 10^7 \text{ m}^{-1} \left(\frac{1}{1^2} - \frac{1}{2^2}\right) = 1.097 \times 10^7 \times \frac{3}{4} = 8.228 \times 10^6 \text{ m}^{-1}

    λ2→1=18.228×106 m−1≈1.216×10−7 m=121.6 nm\lambda_{2 \to 1} = \frac{1}{8.228 \times 10^6 \text{ m}^{-1}} \approx 1.216 \times 10^{-7} \text{ m} = 121.6 \text{ nm}

  2. Transition from n=3→1n = 3 \to 1:

    1λ3→1=1.097×107 m−1(112−132)=1.097×107×89=9.751×106 m−1\frac{1}{\lambda_{3 \to 1}} = 1.097 \times 10^7 \text{ m}^{-1} \left(\frac{1}{1^2} - \frac{1}{3^2}\right) = 1.097 \times 10^7 \times \frac{8}{9} = 9.751 \times 10^6 \text{ m}^{-1}

    λ3→1=19.751×106 m−1≈1.026×10−7 m=102.6 nm\lambda_{3 \to 1} = \frac{1}{9.751 \times 10^6 \text{ m}^{-1}} \approx 1.026 \times 10^{-7} \text{ m} = 102.6 \text{ nm}

  3. Transition from n=4→1n = 4 \to 1:

    1λ4→1=1.097×107 m−1(112−142)=1.097×107×1516=1.028×107 m−1\frac{1}{\lambda_{4 \to 1}} = 1.097 \times 10^7 \text{ m}^{-1} \left(\frac{1}{1^2} - \frac{1}{4^2}\right) = 1.097 \times 10^7 \times \frac{15}{16} = 1.028 \times 10^7 \text{ m}^{-1}

    λ4→1=11.028×107 m−1≈9.725×10−8 m=97.25 nm\lambda_{4 \to 1} = \frac{1}{1.028 \times 10^7 \text{ m}^{-1}} \approx 9.725 \times 10^{-8} \text{ m} = 97.25 \text{ nm}


Part (b): Contrasting Wavelength Differences and Conceptual Explanation

  1. Calculate the Consecutive Differences in Wavelength:

    Δλ(2→1)−(3→1)=121.6 nm−102.6 nm=19.0 nm\Delta \lambda_{(2 \to 1) - (3 \to 1)} = 121.6 \text{ nm} - 102.6 \text{ nm} = 19.0 \text{ nm}

    Δλ(3→1)−(4→1)=102.6 nm−97.25 nm=5.35 nm\Delta \lambda_{(3 \to 1) - (4 \to 1)} = 102.6 \text{ nm} - 97.25 \text{ nm} = 5.35 \text{ nm}

  2. Conceptual Reason for Line Crowding:

    • The relationship between transition energy and photon wavelength is inverse:

      λ=hcΔE\lambda = \frac{hc}{\Delta E}

    • As nin_{\text{i}} increases, the energy levels crowd together because En∝−1n2E_n \propto -\frac{1}{n^2}. The photon transition energy ΔE\Delta E approaches a maximum limiting value (the series convergence limit, corresponding to n=∞→1n = \infty \to 1 with ΔE=13.6 eV\Delta E = 13.6 \text{ eV}).
    • Because wavelength depends on the reciprocal 1ΔE\frac{1}{\Delta E}, equal or shrinking increments in energy at high values yield progressively smaller shifts in wavelength. Consequently, as the transition energy approaches the series limit, the spectral lines crowd closer and closer together at the shorter wavelength end rather than spreading evenly.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misapplies the Rydberg formula by directly subtracting quantum numbers rather than subtracting the reciprocal squares of the principal quantum numbers.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1λ2−1=RH(11−12)=1.097×107×0.5=5.485×106 m−1  ⟹  λ2−1=182.3 nm\frac{1}{\lambda_{2-1}} = R_{\text{H}} \left(\frac{1}{1} - \frac{1}{2}\right) = 1.097 \times 10^7 \times 0.5 = 5.485 \times 10^6\text{ m}^{-1} \implies \lambda_{2-1} = 182.3\text{ nm}

    Correct

    1λ2→1=RH(112−122)=1.097×107×34=8.228×106 m−1  ⟹  λ2→1≈121.6 nm\frac{1}{\lambda_{2 \to 1}} = R_{\text{H}} \left(\frac{1}{1^2} - \frac{1}{2^2}\right) = 1.097 \times 10^7 \times \frac{3}{4} = 8.228 \times 10^6\text{ m}^{-1} \implies \lambda_{2 \to 1} \approx 121.6\text{ nm}

    You forgot to square the principal quantum numbers in the Rydberg formula, subtracting 12\frac{1}{2} instead of 122=14\frac{1}{2^2} = \frac{1}{4}.

  2. Step 2

    1λ3−1=RH(11−13)=1.097×107×(23)=7.313×106 m−1  ⟹  λ3−1=136.7 nm\frac{1}{\lambda_{3-1}} = R_{\text{H}} \left(\frac{1}{1} - \frac{1}{3}\right) = 1.097 \times 10^7 \times \left(\frac{2}{3}\right) = 7.313 \times 10^6\text{ m}^{-1} \implies \lambda_{3-1} = 136.7\text{ nm}

    Correct

    1λ3→1=RH(112−132)=1.097×107×89=9.751×106 m−1  ⟹  λ3→1≈102.6 nm\frac{1}{\lambda_{3 \to 1}} = R_{\text{H}} \left(\frac{1}{1^2} - \frac{1}{3^2}\right) = 1.097 \times 10^7 \times \frac{8}{9} = 9.751 \times 10^6\text{ m}^{-1} \implies \lambda_{3 \to 1} \approx 102.6\text{ nm}

    You repeated the same mistake by writing 13\frac{1}{3} instead of squaring the initial energy level to get 132=19\frac{1}{3^2} = \frac{1}{9}.

  3. Step 3

    1λ4−1=RH(11−14)=1.097×107×0.75=8.228×106 m−1  ⟹  λ4−1=121.5 nm\frac{1}{\lambda_{4-1}} = R_{\text{H}} \left(\frac{1}{1} - \frac{1}{4}\right) = 1.097 \times 10^7 \times 0.75 = 8.228 \times 10^6\text{ m}^{-1} \implies \lambda_{4-1} = 121.5\text{ nm}

    Correct

    1λ4→1=RH(112−142)=1.097×107×1516=1.028×107 m−1  ⟹  λ4→1≈97.25 nm\frac{1}{\lambda_{4 \to 1}} = R_{\text{H}} \left(\frac{1}{1^2} - \frac{1}{4^2}\right) = 1.097 \times 10^7 \times \frac{15}{16} = 1.028 \times 10^7\text{ m}^{-1} \implies \lambda_{4 \to 1} \approx 97.25\text{ nm}

    You subtracted 14\frac{1}{4} instead of 142=116\frac{1}{4^2} = \frac{1}{16}.

  4. Step 4

    λ2−1−λ3−1=182.3 nm−136.7 nm=45.6 nm  ⟹  λ3−1−λ4−1=136.7 nm−121.5 nm=15.2 nm\lambda_{2-1} - \lambda_{3-1} = 182.3\text{ nm} - 136.7\text{ nm} = 45.6\text{ nm} \implies \lambda_{3-1} - \lambda_{4-1} = 136.7\text{ nm} - 121.5\text{ nm} = 15.2\text{ nm}

    Correct

    λ2→1−λ3→1=121.6 nm−102.6 nm=19.0 nm  ⟹  λ3→1−λ4→1=102.6 nm−97.25 nm=5.35 nm\lambda_{2 \to 1} - \lambda_{3 \to 1} = 121.6\text{ nm} - 102.6\text{ nm} = 19.0\text{ nm} \implies \lambda_{3 \to 1} - \lambda_{4 \to 1} = 102.6\text{ nm} - 97.25\text{ nm} = 5.35\text{ nm}

    Your arithmetic and method for computing consecutive line spacing are correct, but the numerical differences reflect the incorrect wavelengths calculated earlier.

  5. Step 5

    Because λ=hcΔE\lambda = \frac{hc}{\Delta E}, the inverse relation compresses wavelength differences as the total transition energy increases.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the Rydberg constant value and used the reciprocal relationship λ=1ν\lambda = \frac{1}{\nu}.

You performed accurate arithmetic conversions between meters and nanometers.

You clearly explained why lines crowd together using the relation λ=hcΔE\lambda = \frac{hc}{\Delta E}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Rydberg Formula Omission of Quantum Number Squares

You wrote the difference between levels as 1nf−1ni\frac{1}{n_{\text{f}}} - \frac{1}{n_{\text{i}}} rather than squaring the quantum numbers as 1nf2−1ni2\frac{1}{n_{\text{f}}^2} - \frac{1}{n_{\text{i}}^2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Bohr's energy levels depend on the inverse square of the principal quantum number (En∝−1n2E_n \propto -\frac{1}{n^2}). Omitting the exponent squares leads to calculating energy changes from an incorrect linear reciprocal model.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the Rydberg Equation
  • The Rydberg formula relates wave numbers directly to reciprocal squares of integers: 1λ=RH(1nf2−1ni2)\frac{1}{\lambda} = R_{\text{H}} \left(\frac{1}{n_{\text{f}}^2} - \frac{1}{n_{\text{i}}^2}\right).

  • Always write down the formula with the squares visible before substituting numerical values for nn.

Double-Check Quantum Number Powers
  • Electronic energy levels in hydrogen are given by En=−2.18×10−18 Jn2E_n = -\frac{2.18 \times 10^{-18}\text{ J}}{n^2}, meaning photon energies depend on differences of inverse squares.

  • Square each level's integer value (12,22,32,…1^2, 2^2, 3^2, \dots) before taking reciprocals and finding the difference.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute nf=1n_{\text{f}} = 1 and ni=2n_{\text{i}} = 2 into the correct Rydberg formula: 1λ2→1=1.097×107 m−1(112−122)=8.228×106 m−1\frac{1}{\lambda_{2 \to 1}} = 1.097 \times 10^7\text{ m}^{-1} \left(\frac{1}{1^2} - \frac{1}{2^2}\right) = 8.228 \times 10^6\text{ m}^{-1}. Inverting yields λ2→1≈121.6 nm\lambda_{2 \to 1} \approx 121.6\text{ nm}.

  2. Substitute ni=3n_{\text{i}} = 3: 1λ3→1=1.097×107 m−1(1−19)=9.751×106 m−1  ⟹  λ3→1≈102.6 nm\frac{1}{\lambda_{3 \to 1}} = 1.097 \times 10^7\text{ m}^{-1} \left(1 - \frac{1}{9}\right) = 9.751 \times 10^6\text{ m}^{-1} \implies \lambda_{3 \to 1} \approx 102.6\text{ nm}.

  3. Substitute ni=4n_{\text{i}} = 4: 1λ4→1=1.097×107 m−1(1−116)=1.028×107 m−1  ⟹  λ4→1≈97.25 nm\frac{1}{\lambda_{4 \to 1}} = 1.097 \times 10^7\text{ m}^{-1} \left(1 - \frac{1}{16}\right) = 1.028 \times 10^7\text{ m}^{-1} \implies \lambda_{4 \to 1} \approx 97.25\text{ nm}.

  4. Calculate the spacing differences: λ2→1−λ3→1=121.6 nm−102.6 nm=19.0 nm\lambda_{2 \to 1} - \lambda_{3 \to 1} = 121.6\text{ nm} - 102.6\text{ nm} = 19.0\text{ nm}, and λ3→1−λ4→1=102.6 nm−97.25 nm=5.35 nm\lambda_{3 \to 1} - \lambda_{4 \to 1} = 102.6\text{ nm} - 97.25\text{ nm} = 5.35\text{ nm}.

Final answer

(a) λ2→1=121.6 nm\lambda_{2 \to 1} = 121.6\text{ nm}, λ3→1=102.6 nm\lambda_{3 \to 1} = 102.6\text{ nm}, λ4→1=97.25 nm\lambda_{4 \to 1} = 97.25\text{ nm}; (b) Spacings are 19.0 nm19.0\text{ nm} and 5.35 nm5.35\text{ nm}. Lines converge toward shorter wavelengths because λ=hcΔE\lambda = \frac{hc}{\Delta E} compresses differences as transition energy approaches the series limit.

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-evaluate transition calculations using explicit squared denominators (1nf2−1ni2)\left(\frac{1}{n_{\text{f}}^2} - \frac{1}{n_{\text{i}}^2}\right).

  • Verify your answers against standard benchmark wavelengths (such as Lyman-alpha at ≈121.6 nm\approx 121.6\text{ nm} or Balmer-alpha at ≈656.3 nm\approx 656.3\text{ nm}).

  • Practice calculating convergence limits where ni→∞n_{\text{i}} \to \infty to strengthen your understanding of series boundaries.

OverviewACEpath Teacher's Diagnosis

02 The student confuses wavenumber 1/λ with wavelength λ, calculating the values of 1/λ but failing to take the reciprocal to find the actual wavelengths in nanometers.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1λ2−1=1.097×107×(1−14)=8.228×106 m−1  ⟹  λ2−1=8.23×106 nm\frac{1}{\lambda_{2-1}} = 1.097 \times 10^7 \times \left(1 - \frac{1}{4}\right) = 8.228 \times 10^6\text{ m}^{-1} \implies \lambda_{2-1} = 8.23 \times 10^6\text{ nm}

    Correct

    1λ2→1=8.228×106 m−1  ⟹  λ2→1=18.228×106 m−1≈121.6 nm\frac{1}{\lambda_{2 \to 1}} = 8.228 \times 10^6\text{ m}^{-1} \implies \lambda_{2 \to 1} = \frac{1}{8.228 \times 10^6\text{ m}^{-1}} \approx 121.6\text{ nm}

    You correctly evaluated the Rydberg expression for 1λ\frac{1}{\lambda}, but you equated λ\lambda directly to this numerical value instead of taking the reciprocal λ=18.228×106 m−1\lambda = \frac{1}{8.228 \times 10^6\text{ m}^{-1}}.

  2. Step 2

    1λ3−1=1.097×107×(1−19)=9.751×106 m−1  ⟹  λ3−1=9.75×106 nm\frac{1}{\lambda_{3-1}} = 1.097 \times 10^7 \times \left(1 - \frac{1}{9}\right) = 9.751 \times 10^6\text{ m}^{-1} \implies \lambda_{3-1} = 9.75 \times 10^6\text{ nm}

    Correct

    1λ3→1=9.751×106 m−1  ⟹  λ3→1=19.751×106 m−1≈102.6 nm\frac{1}{\lambda_{3 \to 1}} = 9.751 \times 10^6\text{ m}^{-1} \implies \lambda_{3 \to 1} = \frac{1}{9.751 \times 10^6\text{ m}^{-1}} \approx 102.6\text{ nm}

    You calculated 1λ\frac{1}{\lambda} correctly, but again omitted the reciprocal operation needed to solve for λ\lambda.

  3. Step 3

    1λ4−1=1.097×107×(1−116)=1.028×107 m−1  ⟹  λ4−1=1.03×107 nm\frac{1}{\lambda_{4-1}} = 1.097 \times 10^7 \times \left(1 - \frac{1}{16}\right) = 1.028 \times 10^7\text{ m}^{-1} \implies \lambda_{4-1} = 1.03 \times 10^7\text{ nm}

    Correct

    1λ4→1=1.028×107 m−1  ⟹  λ4→1=11.028×107 m−1≈97.25 nm\frac{1}{\lambda_{4 \to 1}} = 1.028 \times 10^7\text{ m}^{-1} \implies \lambda_{4 \to 1} = \frac{1}{1.028 \times 10^7\text{ m}^{-1}} \approx 97.25\text{ nm}

    You correctly found the wavenumber 1λ\frac{1}{\lambda}, but set λ\lambda equal to that value instead of inverting it.

  4. Step 4

    λ2−1−λ3−1=8.23×106 nm−9.75×106 nm=−1.52×106 nm  ⟹  λ3−1−λ4−1=9.75×106 nm−1.03×107 nm=−0.55×106 nm\lambda_{2-1} - \lambda_{3-1} = 8.23 \times 10^6\text{ nm} - 9.75 \times 10^6\text{ nm} = -1.52 \times 10^6\text{ nm} \implies \lambda_{3-1} - \lambda_{4-1} = 9.75 \times 10^6\text{ nm} - 1.03 \times 10^7\text{ nm} = -0.55 \times 10^6\text{ nm}

    Correct

    λ2→1−λ3→1=121.6 nm−102.6 nm=19.0 nm  ⟹  λ3→1−λ4→1=102.6 nm−97.25 nm=5.35 nm\lambda_{2 \to 1} - \lambda_{3 \to 1} = 121.6\text{ nm} - 102.6\text{ nm} = 19.0\text{ nm} \implies \lambda_{3 \to 1} - \lambda_{4 \to 1} = 102.6\text{ nm} - 97.25\text{ nm} = 5.35\text{ nm}

    Your subtraction method was carried out correctly, but the values and negative signs resulted from using un-inverted wavenumbers instead of true wavelengths.

  5. Step 5

    "Because λ\lambda is inversely proportional to transition energy, higher energies cause lines to crowd closer together as ΔE\Delta E approaches the ionization limit."

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the principal quantum numbers into the Rydberg formula.

You accurately computed the wavenumber values for all three transitions.

You clearly explained the physical reason why lines converge toward the high-energy limit.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal Omission

You calculated 1λ\frac{1}{\lambda} correctly, but forgot to press the reciprocal button x−1x^{-1} to obtain λ\lambda.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated wavenumber (ν~=1λ\tilde{\nu} = \frac{1}{\lambda}) with wavelength (λ\lambda), treating the output of the Rydberg formula directly as λ\lambda without taking its inverse.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Left Side of the Rydberg Formula
  • The Rydberg formula yields 1λ\frac{1}{\lambda}, not λ\lambda.

  • Always isolate λ\lambda by computing λ=(1λ)−1\lambda = \left(\frac{1}{\lambda}\right)^{-1} before writing down the wavelength.

Verify Physical Units
  • The Rydberg constant has units of m−1\text{m}^{-1}, so the calculated quantity has units of m−1\text{m}^{-1}.

  • Invert the quantity to get meters (m\text{m}), then multiply by 109 nm/m10^9\text{ nm/m} to convert to nanometers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the reciprocal of each wavenumber to find λ\lambda in meters: λ=1wavenumber\lambda = \frac{1}{\text{wavenumber}}.

  2. Convert meters to nanometers: λ2→1=18.228×106 m−1=1.215×10−7 m=121.6 nm\lambda_{2 \to 1} = \frac{1}{8.228 \times 10^6\text{ m}^{-1}} = 1.215 \times 10^{-7}\text{ m} = 121.6\text{ nm}.

  3. Repeat for the next transitions: λ3→1=102.6 nm\lambda_{3 \to 1} = 102.6\text{ nm} and λ4→1=97.25 nm\lambda_{4 \to 1} = 97.25\text{ nm}.

  4. Compute consecutive differences: 121.6 nm−102.6 nm=19.0 nm121.6\text{ nm} - 102.6\text{ nm} = 19.0\text{ nm}, and 102.6 nm−97.25 nm=5.35 nm102.6\text{ nm} - 97.25\text{ nm} = 5.35\text{ nm}.

Final answer

(a) λ2→1=121.6 nm\lambda_{2 \to 1} = 121.6\text{ nm}, λ3→1=102.6 nm\lambda_{3 \to 1} = 102.6\text{ nm}, λ4→1=97.25 nm\lambda_{4 \to 1} = 97.25\text{ nm}; (b) Δλ=19.0 nm\Delta\lambda = 19.0\text{ nm} versus 5.35 nm5.35\text{ nm}; lines crowd at shorter wavelengths because λ∝1ΔE\lambda \propto \frac{1}{\Delta E}, causing equal or shrinking ΔE\Delta E intervals to yield progressively tighter spacing in λ\lambda.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out 'λ=1/(… )\lambda = 1 / (\dots)' as a distinct algebraic step whenever using the Rydberg formula.

  • Perform a sanity check on atomic emission wavelengths: Lyman series lines must fall in the ultraviolet range (91 nm−122 nm91\text{ nm} - 122\text{ nm}).

OverviewACEpath Teacher's Diagnosis

03 The student calculates emission wavelengths correctly but asserts that lines crowd closer together at longer wavelengths due to assuming wavelength spacing directly mirrors the decrease in energy gap between adjacent levels.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1λ2−1=1.097×107×(1−14)=8.228×106 m−1  ⟹  λ2−1=121.6 nm\frac{1}{\lambda_{2-1}} = 1.097 \times 10^7 \times (1 - \frac{1}{4}) = 8.228 \times 10^6\text{ m}^{-1} \implies \lambda_{2-1} = 121.6\text{ nm}, 1λ3−1=1.097×107×(1−19)=9.751×106 m−1  ⟹  λ3−1=102.6 nm\frac{1}{\lambda_{3-1}} = 1.097 \times 10^7 \times (1 - \frac{1}{9}) = 9.751 \times 10^6\text{ m}^{-1} \implies \lambda_{3-1} = 102.6\text{ nm}, 1λ4−1=1.097×107×(1−116)=1.028×107 m−1  ⟹  λ4−1=97.3 nm\frac{1}{\lambda_{4-1}} = 1.097 \times 10^7 \times (1 - \frac{1}{16}) = 1.028 \times 10^7\text{ m}^{-1} \implies \lambda_{4-1} = 97.3\text{ nm}

  2. Step 2

    λ2−1−λ3−1=19.0 nm\lambda_{2-1} - \lambda_{3-1} = 19.0\text{ nm}, λ3−1−λ4−1=102.6 nm−97.3 nm=5.3 nm\lambda_{3-1} - \lambda_{4-1} = 102.6\text{ nm} - 97.3\text{ nm} = 5.3\text{ nm}

  3. Step 3

    "Because the energy gap between adjacent levels decreases as nn increases, the wavelengths must crowd together at longer wavelengths where the energy differences are smallest."

    Correct

    Because emission wavelength is inversely related to transition energy (λ=hcΔE\lambda = \frac{hc}{\Delta E}), transitions from higher nn to nf=1n_{\text{f}} = 1 involve larger total energy releases (approaching the continuum limit 13.6 eV13.6\text{ eV}). As ΔE\Delta E grows large and levels converge, reciprocal values 1ΔE\frac{1}{\Delta E} change progressively less per step, causing the spectral lines to crowd together at the shorter wavelength end (toward the series limit at 91.2 nm91.2\text{ nm}).

    Your explanation claims lines crowd at longer wavelengths, which contradicts your own numerical calculations where the spacing shrinks toward shorter wavelengths (121.6 nm→102.6 nm→97.3 nm121.6\text{ nm} \to 102.6\text{ nm} \to 97.3\text{ nm}). Transition energy ΔEn→1\Delta E_{n \to 1} increases with nn, so the highest-energy transitions correspond to the shortest wavelengths.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the Rydberg equation to compute the three Lyman transition wavelengths.

You accurately subtracted consecutive wavelengths to find the line spacings of 19.0 nm19.0\text{ nm} and 5.3 nm5.3\text{ nm}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse relation between energy and wavelength misapplied

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the shrinking energy gap between adjacent levels ΔEn→n−1\Delta E_{n \to n-1} with the total emission energy ΔEn→1\Delta E_{n \to 1}. Higher nn levels involve larger total energy drops to n=1n=1, meaning shorter wavelengths, so the convergence of high-nn energy levels forces spectral lines to bunch tightly at the short-wavelength (high-energy) limit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Photon Energy vs. Transition Wavelength
  • Photon energy and wavelength are inversely related: λ=hcΔE\lambda = \frac{hc}{\Delta E}.

  • Always associate larger transition energies with shorter wavelengths, and smaller transition energies with longer wavelengths.

Emission Series Convergence
  • For any series with fixed nfn_{\text{f}}, total transition energy ΔEni→nf\Delta E_{n_{\text{i}} \to n_{\text{f}}} increases toward the series limit as ni→∞n_{\text{i}} \to \infty.

  • Recognize that because upper levels converge near the ionization threshold, lines must crowd together at the maximum transition energy, which corresponds to the minimum (shortest) wavelength.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Observe from your calculations that λ2→1=121.6 nm\lambda_{2\to 1} = 121.6\text{ nm}, λ3→1=102.6 nm\lambda_{3\to 1} = 102.6\text{ nm}, and λ4→1=97.3 nm\lambda_{4\to 1} = 97.3\text{ nm}, with differences shrinking from 19.0 nm19.0\text{ nm} to 5.3 nm5.3\text{ nm}.

  2. Notice that the wavelengths are decreasing while the line spacing is also shrinking.

  3. Relate this to energy: ΔEn→1\Delta E_{n\to 1} increases with nn toward the series ionization limit (13.6 eV13.6\text{ eV}), meaning λ=hcΔE\lambda = \frac{hc}{\Delta E} approaches its minimum value (91.2 nm91.2\text{ nm}).

  4. Conclude that as the energy levels bunch up near n=∞n = \infty, the corresponding emission lines crowd together at shorter wavelengths (the high-energy ultraviolet limit).

Final answer

(a) λ2→1=121.6 nm\lambda_{2\to 1} = 121.6\text{ nm}, λ3→1=102.6 nm\lambda_{3\to 1} = 102.6\text{ nm}, λ4→1=97.3 nm\lambda_{4\to 1} = 97.3\text{ nm}; (b) Spacings are 19.0 nm19.0\text{ nm} and 5.3 nm5.3\text{ nm}; lines crowd together at shorter wavelengths because larger transition energies ΔEn→1\Delta E_{n\to 1} converge near the ionization threshold, compressing λ=hcΔE\lambda = \frac{hc}{\Delta E} toward the series limit.

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch an energy-level diagram alongside a wavelength scale to visually connect large ΔE\Delta E transitions to small λ\lambda positions.

  • Practice identifying the series limit (convergence limit) for other hydrogen emission series, such as the Balmer series (nf=2n_{\text{f}} = 2).

Lock it in

Similar question

01

Calculate the wavelength (in nanometers) of the first line of the Balmer series (ni=3→nf=2n_{\text{i}} = 3 \to n_{\text{f}} = 2) using RH=1.097×107 m−1R_{\text{H}} = 1.097 \times 10^7\text{ m}^{-1}.

Answer

656.3 nm656.3\text{ nm}. Key steps: 1λ=1.097×107(122−132)=1.097×107×536=1.524×106 m−1\frac{1}{\lambda} = 1.097 \times 10^7 \left(\frac{1}{2^2} - \frac{1}{3^2}\right) = 1.097 \times 10^7 \times \frac{5}{36} = 1.524 \times 10^6\text{ m}^{-1}; invert to find λ=6.563×10−7 m=656.3 nm\lambda = 6.563 \times 10^{-7}\text{ m} = 656.3\text{ nm}.

02

Calculate the series limit (shortest possible wavelength) for the Lyman series (nf=1n_{\text{f}} = 1, ni→∞n_{\text{i}} \to \infty) in nanometers.

Answer

91.16 nm91.16\text{ nm}. Key steps: As ni→∞n_{\text{i}} \to \infty, 1ni2→0\frac{1}{n_{\text{i}}^2} \to 0. Thus 1λ∞=RH(112−0)=1.097×107 m−1\frac{1}{\lambda_\infty} = R_{\text{H}} \left(\frac{1}{1^2} - 0\right) = 1.097 \times 10^7\text{ m}^{-1}, giving λ∞=11.097×107 m−1≈9.116×10−8 m=91.16 nm\lambda_\infty = \frac{1}{1.097 \times 10^7\text{ m}^{-1}} \approx 9.116 \times 10^{-8}\text{ m} = 91.16\text{ nm}.

03

For the Paschen series (nf=3n_{\text{f}} = 3), calculate λ4→3\lambda_{4 \to 3} and λ5→3\lambda_{5 \to 3} in nanometers, then verify that consecutive wavelength differences decrease.

Answer

λ4→3=1875 nm\lambda_{4 \to 3} = 1875\text{ nm} and λ5→3=1282 nm\lambda_{5 \to 3} = 1282\text{ nm}. Key steps: 1λ4→3=RH(19−116)=RH(7144)  ⟹  λ4→3≈1875 nm\frac{1}{\lambda_{4 \to 3}} = R_{\text{H}}\left(\frac{1}{9} - \frac{1}{16}\right) = R_{\text{H}}\left(\frac{7}{144}\right) \implies \lambda_{4 \to 3} \approx 1875\text{ nm}. 1λ5→3=RH(19−125)=RH(16225)  ⟹  λ5→3≈1282 nm\frac{1}{\lambda_{5 \to 3}} = R_{\text{H}}\left(\frac{1}{9} - \frac{1}{25}\right) = R_{\text{H}}\left(\frac{16}{225}\right) \implies \lambda_{5 \to 3} \approx 1282\text{ nm}. The initial jump produces a difference of 593 nm593\text{ nm}, whereas higher jumps crowd into narrower wavelength bands toward the 820.4 nm820.4\text{ nm} series limit.

Loading workspace…