Resources

A 1.00 L1.00\text{ L} solution contains 0.020 M Mg2+0.020\text{ M }\text{Mg}^{2+} and is buffered using an ammonia/ammonium buffer system consisting of 0.150 M NH30.150\text{ M }\text{NH}_3 and 0.250 M NH4Cl0.250\text{ M }\text{NH}_4\text{Cl} at 25∘C25^\circ\text{C}. For ammonia, Kb=1.8×10−5K_b = 1.8 \times 10^{-5}, and the solubility product constant for magnesium hydroxide, Mg(OH)2\text{Mg(OH)}_2, is Ksp=5.6×10−12K_{sp} = 5.6 \times 10^{-12}. Calculate the equilibrium [OH−][\text{OH}^-] in the buffer, compute the ion product quotient QQ for Mg(OH)2\text{Mg(OH)}_2, and determine whether magnesium hydroxide precipitates under these buffered conditions.

Answer and steps

Final answer

[OH−]=1.1×10−5 M[\text{OH}^-] = 1.1 \times 10^{-5}\text{ M}, Q=2.4×10−12Q = 2.4 \times 10^{-12}; since Q<KspQ < K_{sp} (2.4×10−12<5.6×10−122.4 \times 10^{-12} < 5.6 \times 10^{-12}), no precipitate will form.

Steps

01

Calculate the Hydroxide Ion Concentration, [OHX−][\ce{OH-}], in the Buffer

Ammonia (NHX3\ce{NH3}) and ammonium chloride (NHX4Cl\ce{NH4Cl}) form a basic buffer. The equilibrium for the ionization of weak base ammonia in water is:

NHX3(aq)+HX2O(l)⇌NHX4X+(aq)+OHX−(aq)\ce{NH3(aq) + H2O(l) <=> NH4+(aq) + OH-(aq)}

The base dissociation constant expression is:

Kb=[NHX4X+][OHX−][NHX3]K_b = \frac{[\ce{NH4+}][\ce{OH-}]}{[\ce{NH3}]}

Rearranging to solve for [OHX−][\ce{OH-}]:

[OHX−]=Kb⋅[NHX3][NHX4X+][\ce{OH-}] = K_b \cdot \frac{[\ce{NH3}]}{[\ce{NH4+}]}

Substitute the given values into the expression:

[OHX−]=(1.8×10−5)⋅0.150 M0.250 M=(1.8×10−5)⋅0.600=1.08×10−5 M≈1.1×10−5 M[\ce{OH-}] = (1.8 \times 10^{-5}) \cdot \frac{0.150\text{ M}}{0.250\text{ M}} = (1.8 \times 10^{-5}) \cdot 0.600 = 1.08 \times 10^{-5}\text{ M} \approx 1.1 \times 10^{-5}\text{ M}


02

Compute the Reaction Quotient, QQ, for Mg(OH)X2\ce{Mg(OH)2}

The dissolution equilibrium for magnesium hydroxide is:

Mg(OH)X2(s)⇌MgX2+(aq)+2 OHX−(aq)\ce{Mg(OH)2(s) <=> Mg^2+(aq) + 2 OH-(aq)}

The ion product quotient expression corresponds to the form of the solubility product expression:

Q=[MgX2+][OHX−]2Q = [\ce{Mg^2+}][\ce{OH-}]^2

Common Pitfall: Remember to square the hydroxide concentration, [OHX−]2[\ce{OH-}]^2, because of the stoichiometric coefficient of 22 for OHX−\ce{OH-} in the dissolution equation.

Substitute [MgX2+]=0.020 M[\ce{Mg^2+}] = 0.020\text{ M} and [OHX−]=1.08×10−5 M[\ce{OH-}] = 1.08 \times 10^{-5}\text{ M} (or rounded to 1.1×10−5 M1.1 \times 10^{-5}\text{ M}):

Q=(0.020)⋅(1.08×10−5)2=(0.020)⋅(1.17×10−10)≈2.4×10−12Q = (0.020) \cdot (1.08 \times 10^{-5})^2 = (0.020) \cdot (1.17 \times 10^{-10}) \approx 2.4 \times 10^{-12}


03

Compare QQ to KspK_{sp} to Determine Precipitation

Compare the calculated reaction quotient QQ with the solubility product constant KspK_{sp}:

  • Q=2.4×10−12Q = 2.4 \times 10^{-12}
  • Ksp=5.6×10−12K_{sp} = 5.6 \times 10^{-12}

Since Q<KspQ < K_{sp} (2.4×10−12<5.6×10−122.4 \times 10^{-12} < 5.6 \times 10^{-12}), the solution is unsaturated with respect to Mg(OH)X2\ce{Mg(OH)2}. Therefore, no precipitate will form.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the hydroxide ion concentration when calculating the ion product quotient Q, resulting in an incorrectly high Q and false prediction of precipitation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Kb=[NHX4X+][OHX−][NHX3]  ⟹  [OHX−]=(1.8×10−5)(0.150)0.250=1.08×10−5 MK_b = \frac{[\ce{NH4+}][\ce{OH-}]}{[\ce{NH3}]} \implies [\ce{OH-}] = \frac{(1.8 \times 10^{-5})(0.150)}{0.250} = 1.08 \times 10^{-5}\text{ M}

  2. Step 2

    Q=[MgX2+][OHX−]  ⟹  Q=(0.020)(1.08×10−5)=2.16×10−7Q = [\ce{Mg^2+}][\ce{OH-}] \implies Q = (0.020)(1.08 \times 10^{-5}) = 2.16 \times 10^{-7}

    Correct

    Q=[MgX2+][OHX−]2=(0.020)(1.08×10−5)2≈2.33×10−12≈2.4×10−12Q = [\ce{Mg^2+}][\ce{OH-}]^2 = (0.020)(1.08 \times 10^{-5})^2 \approx 2.33 \times 10^{-12} \approx 2.4 \times 10^{-12}

    In the dissolution equilibrium Mg(OH)X2(s)⇌MgX2+(aq)+2 OHX−(aq)\ce{Mg(OH)2(s) <=> Mg^2+(aq) + 2 OH-(aq)}, each mole of Mg(OH)X2\ce{Mg(OH)2} produces two moles of OHX−\ce{OH-}. Therefore, the concentration of OHX−\ce{OH-} must be squared in the ion product quotient expression: Q=[MgX2+][OHX−]2Q = [\ce{Mg^2+}][\ce{OH-}]^2.

  3. Step 3

    Q=2.16×10−7>Ksp=5.6×10−12  ⟹  Mg(OH)X2 will precipitate.Q = 2.16 \times 10^{-7} > K_{sp} = 5.6 \times 10^{-12} \implies \ce{Mg(OH)2}\text{ will precipitate.}

    Correct

    Q=2.4×10−12<Ksp=5.6×10−12  ⟹  No precipitate will form.Q = 2.4 \times 10^{-12} < K_{sp} = 5.6 \times 10^{-12} \implies \text{No precipitate will form.}

    Because your calculated QQ was erroneously large due to omitting the square, your comparison concluded that Q>KspQ > K_{sp}. With the correct Q=2.4×10−12Q = 2.4 \times 10^{-12}, Q<KspQ < K_{sp}, which means the solution is unsaturated and no precipitate forms.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the equilibrium expression for the ammonia buffer.

You calculated the equilibrium [OHX−][\ce{OH-}] accurately using the given buffer concentrations and KbK_b.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Stoichiometric Exponent in Q Expression

You forgot to raise [OHX−][\ce{OH-}] to the power of 2 in the ion product expression for Mg(OH)X2\ce{Mg(OH)2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the stoichiometric coefficients of polyatomic dissociation when constructing solubility product quotient expressions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the Balanced Dissociation Reaction
  • For a sparingly soluble salt MXp XXq(s)⇌p MXn+(aq)+q XXm−(aq)\ce{M_p X_q(s) <=> p M^{n+}(aq) + q X^{m-}(aq)}, the ion product quotient is Q=[MXn+]p[XXm−]qQ = [\ce{M^{n+}}]^p [\ce{X^{m-}}]^q.

  • Always write out the dissociation equation first and carry every ion's stoichiometric coefficient into the exponent of the QQ expression.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the dissociation equilibrium: Mg(OH)X2(s)⇌MgX2+(aq)+2 OHX−(aq)\ce{Mg(OH)2(s) <=> Mg^2+(aq) + 2 OH-(aq)}.

  2. Set up the ion product quotient with stoichiometric exponents: Q=[MgX2+][OHX−]2Q = [\ce{Mg^2+}][\ce{OH-}]^2.

  3. Substitute the known concentrations: Q=(0.020)(1.08×10−5)2=(0.020)(1.166×10−10)=2.33×10−12Q = (0.020)(1.08 \times 10^{-5})^2 = (0.020)(1.166 \times 10^{-10}) = 2.33 \times 10^{-12}.

  4. Compare QQ to KspK_{sp}: since 2.4×10−12<5.6×10−122.4 \times 10^{-12} < 5.6 \times 10^{-12} (Q<KspQ < K_{sp}), the solution remains unsaturated.

Final answer

[OHX−]=1.1×10−5 M[\ce{OH-}] = 1.1 \times 10^{-5}\text{ M}, Q=2.4×10−12Q = 2.4 \times 10^{-12}; since Q<KspQ < K_{sp}, no precipitate forms.

NEXT STEPS
Final Takeaways from Your Teacher
  • Before substituting numbers, write down the full dissociation equation and explicitly check that every stoichiometric coefficient appears as an exponent in QQ.

  • Practice writing KspK_{sp} and QQ expressions for salts with non-1:1 stoichiometry like CaFX2\ce{CaF2}, AgX2CrOX4\ce{Ag2CrO4}, and Al(OH)X3\ce{Al(OH)3}.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the buffer ratio in the equilibrium expression, calculating [OH-] as Kb * [NH4+] / [NH3], which leads to an overestimated [OH-] and incorrect conclusion that precipitation occurs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [OHX−]=Kb×[NHX4X+]/[NHX3]  ⟹  [OHX−]=(1.8×10−5)(0.250)0.150=3.0×10−5 M[\ce{OH-}] = K_b \times [\ce{NH4+}] / [\ce{NH3}] \implies [\ce{OH-}] = \frac{(1.8 \times 10^{-5})(0.250)}{0.150} = 3.0 \times 10^{-5}\text{ M}

    Correct

    [OHX−]=Kb×[NHX3][NHX4X+]=(1.8×10−5)×0.150 M0.250 M≈1.1×10−5 M[\ce{OH-}] = K_b \times \frac{[\ce{NH3}]}{[\ce{NH4+}]} = (1.8 \times 10^{-5}) \times \frac{0.150\text{ M}}{0.250\text{ M}} \approx 1.1 \times 10^{-5}\text{ M}

    From the base dissociation equilibrium NHX3+HX2O⇌NHX4X++OHX−\ce{NH3 + H2O <=> NH4+ + OH-}, the constant is Kb=[NHX4X+][OHX−][NHX3]K_b = \frac{[\ce{NH4+}][\ce{OH-}]}{[\ce{NH3}]}. Rearranging gives [OHX−]=Kb⋅[NHX3][NHX4X+][\ce{OH-}] = K_b \cdot \frac{[\ce{NH3}]}{[\ce{NH4+}]}, but you inverted the fraction to [NHX4X+][NHX3]\frac{[\ce{NH4+}]}{[\ce{NH3}]}.

  2. Step 2

    Q=[MgX2+][OHX−]2  ⟹  Q=(0.020)(3.0×10−5)2=1.8×10−11Q = [\ce{Mg^2+}][\ce{OH-}]^2 \implies Q = (0.020)(3.0 \times 10^{-5})^2 = 1.8 \times 10^{-11}

    Correct

    Q=[MgX2+][OHX−]2=(0.020)(1.08×10−5)2≈2.4×10−12Q = [\ce{Mg^2+}][\ce{OH-}]^2 = (0.020)(1.08 \times 10^{-5})^2 \approx 2.4 \times 10^{-12}

    You applied the correct expression and squared [OHX−][\ce{OH-}], but the numerical value was affected by the incorrect [OHX−][\ce{OH-}] from the previous step.

  3. Step 3

    Q=1.8×10−11>Ksp=5.6×10−12  ⟹  Mg(OH)X2 will precipitate.Q = 1.8 \times 10^{-11} > K_{sp} = 5.6 \times 10^{-12} \implies \ce{Mg(OH)2}\text{ will precipitate.}

    Correct

    Q=2.4×10−12<Ksp=5.6×10−12  ⟹  No precipitate will form.Q = 2.4 \times 10^{-12} < K_{sp} = 5.6 \times 10^{-12} \implies \text{No precipitate will form.}

    Your comparison logic followed correctly from your calculated QQ, but because the true QQ (2.4×10−122.4 \times 10^{-12}) is less than KspK_{sp} (5.6×10−125.6 \times 10^{-12}), no precipitation actually occurs.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the expression Q=[MgX2+][OHX−]2Q = [\ce{Mg^2+}][\ce{OH-}]^2 with the proper stoichiometric exponent.

You accurately stated the rule that precipitation occurs when Q>KspQ > K_{sp}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted buffer ratio in equilibrium expression

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the numerator and denominator when rearranging the KbK_b expression for [OHX−][\ce{OH-}], placing the conjugate acid in the numerator and the weak base in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rearranging $K_b$ for $[\ce{OH-}]$
  • For a weak base B\ce{B}, Kb=[BHX+][OHX−][B]  ⟹  [OHX−]=Kb⋅[B][BHX+]K_b = \frac{[\ce{BH+}][\ce{OH-}]}{[\ce{B}]} \implies [\ce{OH-}] = K_b \cdot \frac{[\ce{B}]}{[\ce{BH+}]}.

  • Always write out the equilibrium expression before rearranging to ensure the unprotonated base is in the numerator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate [OHX−]=(1.8×10−5)⋅0.1500.250=1.08×10−5 M[\ce{OH-}] = (1.8 \times 10^{-5}) \cdot \frac{0.150}{0.250} = 1.08 \times 10^{-5}\text{ M}.

  2. Substitute into the quotient: Q=(0.020)(1.08×10−5)2≈2.4×10−12Q = (0.020)(1.08 \times 10^{-5})^2 \approx 2.4 \times 10^{-12}.

  3. Compare with KspK_{sp}: since 2.4×10−12<5.6×10−122.4 \times 10^{-12} < 5.6 \times 10^{-12}, Q<KspQ < K_{sp}.

Final answer

[OHX−]=1.1×10−5 M[\ce{OH-}] = 1.1 \times 10^{-5}\text{ M}, Q=2.4×10−12Q = 2.4 \times 10^{-12}; no precipitate forms.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your Henderson-Hasselbalch or KbK_b rearrangements by verifying that adding conjugate acid decreases [OHX−][\ce{OH-}], meaning [extconjugateacid][ ext{conjugate acid}] must be in the denominator.

  • Practice rearranging buffer equilibrium expressions directly from the mass-action law before substituting numbers.

OverviewACEpath Teacher's Diagnosis

03 The student treats [OH-] as coming from the dissociation of Mg(OH)2 by setting [OH-] = 2[Mg2+] instead of using the buffer equilibrium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [OH−]=2[Mg2+]=2(0.020)=0.040 M[\text{OH}^-] = 2[\text{Mg}^{2+}] = 2(0.020) = 0.040\text{ M}

    Correct

    [OH−]=Kb⋅[NH3][NH4+]=(1.8×10−5)⋅0.1500.250=1.1×10−5 M[\text{OH}^-] = K_b \cdot \frac{[\text{NH}_3]}{[\text{NH}_4^+]} = (1.8 \times 10^{-5}) \cdot \frac{0.150}{0.250} = 1.1 \times 10^{-5}\text{ M}

    The solution is buffered by an NH3/NH4Cl\text{NH}_3/\text{NH}_4\text{Cl} mixture, which fixes the hydroxide concentration. The stoichiometric relationship [OH−]=2[Mg2+][\text{OH}^-] = 2[\text{Mg}^{2+}] applies only when solid Mg(OH)2\text{Mg(OH)}_2 dissolves in pure water, not when Mg2+\text{Mg}^{2+} is added to an external buffer.

  2. Step 2

    Q=[Mg2+][OH−]2  ⟹  Q=(0.020)(0.040)2=3.2×10−5Q = [\text{Mg}^{2+}][\text{OH}^-]^2 \implies Q = (0.020)(0.040)^2 = 3.2 \times 10^{-5}

    Correct

    Q=[Mg2+][OH−]2=(0.020)(1.08×10−5)2=2.4×10−12Q = [\text{Mg}^{2+}][\text{OH}^-]^2 = (0.020)(1.08 \times 10^{-5})^2 = 2.4 \times 10^{-12}

    You used the correct algebraic form for the ion product quotient QQ, but substituting the incorrect [OH−][\text{OH}^-] from Step 1 led to an inaccurate numerical value.

  3. Step 3

    Q=3.2×10−5>Ksp=5.6×10−12  ⟹  Mg(OH)2 will precipitate.Q = 3.2 \times 10^{-5} > K_{sp} = 5.6 \times 10^{-12} \implies \text{Mg(OH)}_2\text{ will precipitate.}

    Correct

    Q=2.4×10−12<Ksp=5.6×10−12  ⟹  no precipitate forms.Q = 2.4 \times 10^{-12} < K_{sp} = 5.6 \times 10^{-12} \implies \text{no precipitate forms.}

    Your comparison rule (Q>KspQ > K_{sp} means precipitation) is conceptually sound, but because the true QQ is 2.4×10−122.4 \times 10^{-12}, which is less than KspK_{sp}, the solution is actually unsaturated and no precipitate will form.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formulated the reaction quotient expression Q=[Mg2+][OH−]2Q = [\text{Mg}^{2+}][\text{OH}^-]^2 with the proper stoichiometric exponent.

You correctly identified the criterion that a precipitate forms when Q>KspQ > K_{sp}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignoring Buffer Equilibrium for Common Ion Concentration

You equated [OH−][\text{OH}^-] to 2[Mg2+]2[\text{Mg}^{2+}] instead of using the base dissociation constant KbK_b of the ammonia buffer.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the source of common ions: assuming that the anion concentration must come stoichiometrically from the dissolving compound rather than recognizing that an existing buffer system establishes and controls the solution's [OH−][\text{OH}^-].

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Source of $[\text{OH}^-]$
  • When a solution contains an active buffer or strong acid/base, the solution [OH−][\text{OH}^-] (or [H+][\text{H}^+]) is established by that acid-base system, not by stoichiometric dissolution.

  • Check whether a buffer or fixed pH is given; if so, calculate [OH−][\text{OH}^-] using the Henderson-Hasselbalch equation or Kb=[BH+][OH−][B]K_b = \frac{[\text{BH}^+][\text{OH}^-]}{[\text{B}]} before touching QQ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate [OH−][\text{OH}^-] using the buffer equilibrium: [OH−]=Kb⋅[NH3][NH4+]=(1.8×10−5)⋅0.1500.250=1.08×10−5 M[\text{OH}^-] = K_b \cdot \frac{[\text{NH}_3]}{[\text{NH}_4^+]} = (1.8 \times 10^{-5}) \cdot \frac{0.150}{0.250} = 1.08 \times 10^{-5}\text{ M}.

  2. Substitute [Mg2+]=0.020 M[\text{Mg}^{2+}] = 0.020\text{ M} and the buffer [OH−][\text{OH}^-] into QQ: Q=(0.020)(1.08×10−5)2=2.33×10−12≈2.4×10−12Q = (0.020)(1.08 \times 10^{-5})^2 = 2.33 \times 10^{-12} \approx 2.4 \times 10^{-12}.

  3. Compare QQ to KspK_{sp}: since Q=2.4×10−12<Ksp=5.6×10−12Q = 2.4 \times 10^{-12} < K_{sp} = 5.6 \times 10^{-12}, the solution is unsaturated.

Final answer

[OH−]=1.1×10−5 M[\text{OH}^-] = 1.1 \times 10^{-5}\text{ M}, Q=2.4×10−12Q = 2.4 \times 10^{-12}; since Q<KspQ < K_{sp}, no precipitate will form.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between dissolving a sparingly soluble salt in pure water versus mixing ions in a pre-existing buffer solution.

  • Practice identifying whether ion concentrations are independent variables supplied by external solutes before setting up equilibrium quotient expressions.

Lock it in

Similar question

01

A solution contains 1.5×10−3 M PbX2+1.5 \times 10^{-3}\text{ M }\ce{Pb^2+} and 2.0×10−3 M IX−2.0 \times 10^{-3}\text{ M }\ce{I-}. Given Ksp(PbIX2)=9.8×10−9K_{sp}(\ce{PbI2}) = 9.8 \times 10^{-9}, determine whether PbIX2\ce{PbI2} precipitates.

Answer

Write the equilibrium: PbIX2(s)⇌PbX2+(aq)+2 IX−(aq)\ce{PbI2(s) <=> Pb^2+(aq) + 2 I-(aq)}. Calculate Q=[PbX2+][IX−]2=(1.5×10−3)(2.0×10−3)2=6.0×10−9Q = [\ce{Pb^2+}][\ce{I-}]^2 = (1.5 \times 10^{-3})(2.0 \times 10^{-3})^2 = 6.0 \times 10^{-9}. Compare: Q=6.0×10−9<Ksp=9.8×10−9Q = 6.0 \times 10^{-9} < K_{sp} = 9.8 \times 10^{-9}, so no precipitate forms.

02

A buffer maintains a solution at pH=9.20\text{pH} = 9.20 at 25∘C25^\circ\text{C}. If [FeX2+]=5.0×10−4 M[\ce{Fe^2+}] = 5.0 \times 10^{-4}\text{ M}, will Fe(OH)X2\ce{Fe(OH)2} precipitate? (Ksp=4.87×10−17K_{sp} = 4.87 \times 10^{-17})

Answer

Calculate pOH=14.00−9.20=4.80\text{pOH} = 14.00 - 9.20 = 4.80, so [OHX−]=10−4.80=1.58×10−5 M[\ce{OH-}] = 10^{-4.80} = 1.58 \times 10^{-5}\text{ M}. Write the ion product: Q=[FeX2+][OHX−]2=(5.0×10−4)(1.58×10−5)2=1.25×10−13Q = [\ce{Fe^2+}][\ce{OH-}]^2 = (5.0 \times 10^{-4})(1.58 \times 10^{-5})^2 = 1.25 \times 10^{-13}. Compare: Q=1.25×10−13>Ksp=4.87×10−17Q = 1.25 \times 10^{-13} > K_{sp} = 4.87 \times 10^{-17}, so Fe(OH)X2\ce{Fe(OH)2} will precipitate.

03

A 250 mL250\text{ mL} sample of 0.0040 M AgNOX30.0040\text{ M }\ce{AgNO3} is mixed with 750 mL750\text{ mL} of 0.0020 M KX2CrOX40.0020\text{ M }\ce{K2CrO4}. Given Ksp(AgX2CrOX4)=1.1×10−12K_{sp}(\ce{Ag2CrO4}) = 1.1 \times 10^{-12}, calculate QQ and determine if a precipitate forms.

Answer

Account for dilution (Vtotal=1000 mLV_{\text{total}} = 1000\text{ mL}): [AgX+]=0.0040×2501000=1.0×10−3 M[\ce{Ag+}] = 0.0040 \times \frac{250}{1000} = 1.0 \times 10^{-3}\text{ M} and [CrOX4X2−]=0.0020×7501000=1.5×10−3 M[\ce{CrO4^2-}] = 0.0020 \times \frac{750}{1000} = 1.5 \times 10^{-3}\text{ M}. Calculate Q=[AgX+]2[CrOX4X2−]=(1.0×10−3)2(1.5×10−3)=1.5×10−9Q = [\ce{Ag+}]^2 [\ce{CrO4^2-}] = (1.0 \times 10^{-3})^2 (1.5 \times 10^{-3}) = 1.5 \times 10^{-9}. Since Q=1.5×10−9>Ksp=1.1×10−12Q = 1.5 \times 10^{-9} > K_{sp} = 1.1 \times 10^{-12}, AgX2CrOX4\ce{Ag2CrO4} will precipitate.

Loading workspace…