Resources

The degradation of an organic dye contaminant in a 2.50 L2.50\text{ L} industrial wastewater tank proceeds via 2Dye(aq)+3O3(aq)→Products2\text{Dye}(aq) + 3\text{O}_3(aq) \rightarrow \text{Products}. Over a 45.0 min45.0\text{ min} treatment window, the dye concentration decreases by 135 mg/L135\text{ mg/L}. Given that the molar mass of the dye is 270.3 g/mol270.3\text{ g/mol}, calculate: (a) the average rate of disappearance of the dye expressed in μmol⋅L−1⋅s−1\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}, and (b) the rate of consumption of ozone in mol⋅L−1⋅s−1\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

Answer and steps

Final answer

(a) −Δ[Dye]Δt=0.185 μmol⋅L−1⋅s−1-\frac{\Delta[\text{Dye}]}{\Delta t} = 0.185\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}; (b) −Δ[O3]Δt=2.78×10−7 M⋅s−1-\frac{\Delta[\text{O}_3]}{\Delta t} = 2.78 \times 10^{-7}\text{ M}\cdot\text{s}^{-1}

Steps

Part (a): Average Rate of Disappearance of the Dye

Step 1: Convert the change in mass concentration to molarity

The dye concentration decreases by 135 mg/L135\text{ mg/L} over the treatment period. Using the molar mass M=270.3 g/molM = 270.3\text{ g/mol}:

Δ[Dye]mass=135 mg/L=0.135 g/L\Delta [\text{Dye}]_{\text{mass}} = 135\text{ mg/L} = 0.135\text{ g/L}

Converting mass concentration to molar concentration:

[Dye]=0.135 g/L270.3 g/mol=4.994×10−4 mol/L[\text{Dye}] = \frac{0.135\text{ g/L}}{270.3\text{ g/mol}} = 4.994 \times 10^{-4}\text{ mol/L}

In micromoles per liter (μmol/L\mu\text{mol/L}):

4.994×10−4 mol/L×106 μmol1 mol=499.4 μmol/L4.994 \times 10^{-4}\text{ mol/L} \times \frac{10^6\text{ }\mu\text{mol}}{1\text{ mol}} = 499.4\text{ }\mu\text{mol/L}

(Note: The volume of the tank, 2.50 L2.50\text{ L}, is not needed because the change is already provided in terms of concentration per unit volume).

Step 2: Convert time to seconds and calculate the rate

Convert the time interval Δt=45.0 min\Delta t = 45.0\text{ min} into seconds:

Δt=45.0 min×60 s1 min=2700 s\Delta t = 45.0\text{ min} \times \frac{60\text{ s}}{1\text{ min}} = 2700\text{ s}

The rate of disappearance is defined as a positive quantity:

−Δ[Dye]Δt=499.4 μmol/L2700 s≈0.185 μmol⋅L−1⋅s−1-\frac{\Delta[\text{Dye}]}{\Delta t} = \frac{499.4\text{ }\mu\text{mol/L}}{2700\text{ s}} \approx 0.185\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}


Part (b): Rate of Consumption of Ozone (OX3\ce{O3})

Step 1: Relate the rates using stoichiometry

For the general reaction:

2Dye(aq)+3OX3(aq)→Products2\text{Dye}(aq) + 3\ce{O3}(aq) \rightarrow \text{Products}

The rate of reaction in terms of each reactant is defined by dividing each consumption rate by its stoichiometric coefficient:

Reaction Rate=−12Δ[Dye]Δt=−13Δ[OX3]Δt\text{Reaction Rate} = -\frac{1}{2}\frac{\Delta[\text{Dye}]}{\Delta t} = -\frac{1}{3}\frac{\Delta[\ce{O3}]}{\Delta t}

Rearranging to solve for the rate of ozone consumption:

−Δ[OX3]Δt=32(−Δ[Dye]Δt)-\frac{\Delta[\ce{O3}]}{\Delta t} = \frac{3}{2}\left(-\frac{\Delta[\text{Dye}]}{\Delta t}\right)

Step 2: Calculate the numerical value in mol⋅L−1⋅s−1\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1} (M⋅s−1\text{M}\cdot\text{s}^{-1})

Express the rate of dye disappearance in standard SI concentration units (mol⋅L−1⋅s−1\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}):

−Δ[Dye]Δt=0.185 μmol⋅L−1⋅s−1=1.85×10−7 mol⋅L−1⋅s−1-\frac{\Delta[\text{Dye}]}{\Delta t} = 0.185\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1} = 1.85 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

Using the exact unrounded ratio:

−Δ[OX3]Δt=32×(4.994×10−4 mol/L2700 s)=32×1.850×10−7 M⋅s−1=2.78×10−7 M⋅s−1-\frac{\Delta[\ce{O3}]}{\Delta t} = \frac{3}{2} \times \left(\frac{4.994 \times 10^{-4}\text{ mol/L}}{2700\text{ s}}\right) = \frac{3}{2} \times 1.850 \times 10^{-7}\text{ M}\cdot\text{s}^{-1} = 2.78 \times 10^{-7}\text{ M}\cdot\text{s}^{-1}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the time interval from minutes to seconds, resulting in a rate per minute instead of per second.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δ[Dye]=0.135 g/L270.3 g/mol=4.99×10−4 mol/L=499 μmol/L\Delta[\text{Dye}] = \frac{0.135\text{ g/L}}{270.3\text{ g/mol}} = 4.99 \times 10^{-4}\text{ mol/L} = 499\text{ }\mu\text{mol/L}

  2. Step 2

    Rate=499 μmol/L45.0 min=11.1 μmol⋅L−1⋅s−1\text{Rate} = \frac{499\text{ }\mu\text{mol/L}}{45.0\text{ min}} = 11.1\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

    Correct

    −Δ[Dye]Δt=499.4 μmol/L45.0×60 s=499.4 μmol/L2700 s≈0.185 μmol⋅L−1⋅s−1-\frac{\Delta[\text{Dye}]}{\Delta t} = \frac{499.4\text{ }\mu\text{mol/L}}{45.0 \times 60\text{ s}} = \frac{499.4\text{ }\mu\text{mol/L}}{2700\text{ s}} \approx 0.185\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

    You divided by 45.0 min45.0\text{ min} without converting the time to seconds (45.0 min×60 s/min=2700 s45.0\text{ min} \times 60\text{ s/min} = 2700\text{ s}), but wrote the unit as μmol⋅L−1⋅s−1\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

  3. Step 3

    Rate of O3=32×Rate of Dye\text{Rate of } \text{O}_3 = \frac{3}{2} \times \text{Rate of Dye}

  4. Step 4

    Rate of Dye=4.99×10−4 mol/L45.0 min=1.11×10−5 mol⋅L−1⋅s−1  ⟹  Rate of O3=32×1.11×10−5=1.66×10−5 mol⋅L−1⋅s−1\text{Rate of Dye} = \frac{4.99 \times 10^{-4}\text{ mol/L}}{45.0\text{ min}} = 1.11 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1} \implies \text{Rate of } \text{O}_3 = \frac{3}{2} \times 1.11 \times 10^{-5} = 1.66 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

    Correct

    −Δ[O3]Δt=32×4.994×10−4 mol/L2700 s≈2.78×10−7 mol⋅L−1⋅s−1-\frac{\Delta[\text{O}_3]}{\Delta t} = \frac{3}{2} \times \frac{4.994 \times 10^{-4}\text{ mol/L}}{2700\text{ s}} \approx 2.78 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

    Your stoichiometric multiplication was set up correctly, but your numerical answer inherited the unconverted time interval from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted the mass concentration into molarity using the molar mass accurately.

You recognized the correct mole ratio of 3 O3:2 Dye3\text{ O}_3 : 2\text{ Dye} to relate the two reaction rates.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Time Unit Conversion Error

You divided by 45.0 min45.0\text{ min} while attaching the unit s−1\text{s}^{-1} to your final values.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You skipped the explicit dimensional analysis step for time ( min→s \,\text{min} \rightarrow \text{s}\,, multiplying minutes by 6060), substituting elapsed minutes directly into an expression requiring seconds.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Alignment Check
  • Reaction rates requested in units containing s−1\text{s}^{-1} require time intervals measured in seconds: Δt=(tmin)×60 s/min\Delta t = (t_{\text{min}}) \times 60\text{ s/min}.

  • Always write out unit conversion factors explicitly alongside numbers before evaluating the fraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the elapsed time to seconds: Δt=45.0 min×60 s/min=2700 s\Delta t = 45.0\text{ min} \times 60\text{ s/min} = 2700\text{ s}.

  2. Calculate the rate of dye disappearance: −Δ[Dye]Δt=499.4 μmol/L2700 s≈0.185 μmol⋅L−1⋅s−1-\frac{\Delta[\text{Dye}]}{\Delta t} = \frac{499.4\text{ }\mu\text{mol/L}}{2700\text{ s}} \approx 0.185\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

  3. Calculate the rate of ozone consumption using the converted time: −Δ[O3]Δt=32×4.994×10−4 mol/L2700 s≈2.78×10−7 mol⋅L−1⋅s−1-\frac{\Delta[\text{O}_3]}{\Delta t} = \frac{3}{2} \times \frac{4.994 \times 10^{-4}\text{ mol/L}}{2700\text{ s}} \approx 2.78 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

Final answer

(a) 0.185 μmol⋅L−1⋅s−10.185\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}; (b) 2.78×10−7 mol⋅L−1⋅s−12.78 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the target units before computing to verify whether time needs to be in seconds or minutes.

  • Include unit labels at every algebraic intermediate step to catch mismatched dimensions before arriving at the final numerical answer.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the stoichiometric ratio when relating the rate of ozone consumption to that of the dye, multiplying by 2/3 instead of 3/2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δ[Dye]=135 mg/L270.3 g/mol=0.4994 mmol/L=499.4 μmol/L  ⟹  Δt=45.0×60 s=2700 s  ⟹  Rate of Dye=499.4 μmol/L2700 s=0.185 μmol⋅L−1⋅s−1\Delta[\text{Dye}] = \frac{135\text{ mg/L}}{270.3\text{ g/mol}} = 0.4994\text{ mmol/L} = 499.4\text{ }\mu\text{mol/L} \implies \Delta t = 45.0 \times 60\text{ s} = 2700\text{ s} \implies \text{Rate of Dye} = \frac{499.4\text{ }\mu\text{mol/L}}{2700\text{ s}} = 0.185\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

  2. Step 2

    Rate of Dye=1.85×10−7 mol⋅L−1⋅s−1  ⟹  Rate of O3=(23)×Rate of Dye\text{Rate of Dye} = 1.85 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1} \implies \text{Rate of }\text{O}_3 = \left(\frac{2}{3}\right) \times \text{Rate of Dye}

    Correct

    −13Δ[O3]Δt=−12Δ[Dye]Δt  ⟹  −Δ[O3]Δt=32(−Δ[Dye]Δt)-\frac{1}{3}\frac{\Delta[\text{O}_3]}{\Delta t} = -\frac{1}{2}\frac{\Delta[\text{Dye}]}{\Delta t} \implies -\frac{\Delta[\text{O}_3]}{\Delta t} = \frac{3}{2}\left(-\frac{\Delta[\text{Dye}]}{\Delta t}\right)

    For the reaction 2Dye+3O3→Products2\text{Dye} + 3\text{O}_3 \rightarrow \text{Products}, each rate must be divided by its stoichiometric coefficient: 13Rate(O3)=12Rate(Dye)\frac{1}{3}\text{Rate}(\text{O}_3) = \frac{1}{2}\text{Rate}(\text{Dye}). Solving for the rate of ozone gives Rate(O3)=32Rate(Dye)\text{Rate}(\text{O}_3) = \frac{3}{2}\text{Rate}(\text{Dye}), but you multiplied by 23\frac{2}{3} instead.

  3. Step 3

    Rate of O3=(23)×1.85×10−7=1.23×10−7 mol⋅L−1⋅s−1\text{Rate of }\text{O}_3 = \left(\frac{2}{3}\right) \times 1.85 \times 10^{-7} = 1.23 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

    Correct

    −Δ[O3]Δt=32×1.85×10−7 mol⋅L−1⋅s−1=2.78×10−7 M⋅s−1-\frac{\Delta[\text{O}_3]}{\Delta t} = \frac{3}{2} \times 1.85 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1} = 2.78 \times 10^{-7}\text{ M}\cdot\text{s}^{-1}

    Your arithmetic in this step followed directly from your inverted stoichiometric ratio in step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the mass concentration change of the dye to micromolar concentration using its molar mass.

You converted the time interval from minutes to seconds accurately.

You correctly expressed the dye disappearance rate in standard SI units of mol⋅L−1⋅s−1\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted stoichiometric rate ratio

You accidentally flipped the ratio of coefficients when isolating the rate of ozone consumption.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the stoichiometric equivalence relationship (dividing each species' rate by its coefficient, RateAa=RateBb\frac{\text{Rate}_A}{a} = \frac{\text{Rate}_B}{b}) with direct coefficient multiplication, leading to RateB=abRateA\text{Rate}_B = \frac{a}{b}\text{Rate}_A instead of RateB=baRateA\text{Rate}_B = \frac{b}{a}\text{Rate}_A.

REASONING PATH
Your ACEpath teacher’s suggested approach
General Rate of Reaction Definition
  • For a reaction aA+bB→cCa\text{A} + b\text{B} \rightarrow c\text{C}, the unique reaction rate is −1aΔ[A]Δt=−1bΔ[B]Δt-\frac{1}{a}\frac{\Delta[\text{A}]}{\Delta t} = -\frac{1}{b}\frac{\Delta[\text{B}]}{\Delta t}.

  • Always write the fractional rate equality Rate(A)a=Rate(B)b\frac{\text{Rate}(\text{A})}{a} = \frac{\text{Rate}(\text{B})}{b} before multiplying across to isolate the unknown rate.

Physical Reasonableness Check
  • A reactant with a larger stoichiometric coefficient must be consumed faster than a reactant with a smaller coefficient.

  • Because 3 moles of O3\text{O}_3 are consumed for every 2 moles of dye, ozone must disappear 1.51.5 times as fast as the dye, so its numerical rate must be larger.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the stoichiometric rate identity: −13Δ[O3]Δt=−12Δ[Dye]Δt-\frac{1}{3}\frac{\Delta[\text{O}_3]}{\Delta t} = -\frac{1}{2}\frac{\Delta[\text{Dye}]}{\Delta t}.

  2. Multiply both sides by 33 to solve for ozone consumption: −Δ[O3]Δt=32(−Δ[Dye]Δt)-\frac{\Delta[\text{O}_3]}{\Delta t} = \frac{3}{2}\left(-\frac{\Delta[\text{Dye}]}{\Delta t}\right).

  3. Substitute the rate of dye disappearance: −Δ[O3]Δt=32×(1.850×10−7 mol⋅L−1⋅s−1)=2.78×10−7 mol⋅L−1⋅s−1-\frac{\Delta[\text{O}_3]}{\Delta t} = \frac{3}{2} \times (1.850 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}) = 2.78 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

Final answer

−Δ[O3]Δt=2.78×10−7 mol⋅L−1⋅s−1-\frac{\Delta[\text{O}_3]}{\Delta t} = 2.78 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the balanced equality −1aΔ[A]Δt=−1bΔ[B]Δt-\frac{1}{a}\frac{\Delta[\text{A}]}{\Delta t} = -\frac{1}{b}\frac{\Delta[\text{B}]}{\Delta t} explicitly as your first line of working whenever converting rates between reactants.

  • Perform a sanity check on the relative coefficients: the substance with the larger stoichiometric coefficient must always have a greater rate of disappearance or appearance.

OverviewACEpath Teacher's Diagnosis

03 The student unnecessarily divides the concentration decrease by the total tank volume (2.50 L), confusing amount in moles with concentration in mol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δ[Dye]=(135 mg/L270.3 g/mol)2.50 L=499.5 μmol/L2.50 L=199.8 μmol/L\Delta [\text{Dye}] = \frac{\left(\frac{135\text{ mg/L}}{270.3\text{ g/mol}}\right)}{2.50\text{ L}} = \frac{499.5\text{ }\mu\text{mol/L}}{2.50\text{ L}} = 199.8\text{ }\mu\text{mol/L}

    Correct

    Δ[Dye]=135 mg/L×10−3 g/mg270.3 g/mol=4.994×10−4 mol/L=499.4 μmol/L\Delta [\text{Dye}] = \frac{135\text{ mg/L} \times 10^{-3}\text{ g/mg}}{270.3\text{ g/mol}} = 4.994 \times 10^{-4}\text{ mol/L} = 499.4\text{ }\mu\text{mol/L}

    The value 135 mg/L135\text{ mg/L} is already a concentration per unit volume. Dividing it by the molar mass gives the molar concentration change directly; dividing by the tank volume 2.50 L2.50\text{ L} is unnecessary and changes the units to μmol/L2\mu\text{mol}/\text{L}^2.

  2. Step 2

    Δt=45.0×60 s=2700 s  ⟹  Rate of Dye=199.8 μmol/L2700 s=0.0740 μmol⋅L−1⋅s−1\Delta t = 45.0 \times 60\text{ s} = 2700\text{ s} \implies \text{Rate of Dye} = \frac{199.8\text{ }\mu\text{mol/L}}{2700\text{ s}} = 0.0740\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

    Correct

    -Δ[Dye]Δt\frac{\Delta[\text{Dye}]}{\Delta t} = 499.4 μmol/L2700 s\frac{499.4\text{ }\mu\text{mol/L}}{2700\text{ s}} ≈\approx 0.185\text{ }$$\mu$$\text{mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{s}^{-1}$$

    Your time conversion to seconds and your division of concentration change by time were executed correctly, but your numerical result was affected by the extra volume division from Step 1.

  3. Step 3

    Rate of Dye\text{Rate of Dye} = 7.40 ×\times 10^{-8}\text{ mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{s}^{-1}   ⟹  \implies Rate of O\text{Rate of O}_3 = 32\frac{3}{2} ×\times 7.40 ×\times 10^{-8}\text{ mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{s}^{-1} = 1.11 ×\times 10^{-7}\text{ mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{s}^{-1}$$

    Correct

    -Δ[OX3]Δt\frac{\Delta[\ce{O3}]}{\Delta t} = \frac{3}{2}$$\left(-\frac{\Delta[\text{Dye}]}{\Delta t}\right) = 32\frac{3}{2}(1.850 ×\times 10^{-7}\text{ mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{s}^{-1}) = 2.78 ×\times 10^{-7}\text{ mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{s}^{-1}$$

    You correctly applied the stoichiometric ratio 32\frac{3}{2} from the balanced chemical equation, but the propagated value from Step 1 led to an incorrect final consumption rate for ozone.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the elapsed time of 45.0 min45.0\text{ min} into 2700 s2700\text{ s}.

You applied the correct molar mass conversion factor from grams to moles.

You related the rate of ozone consumption to the rate of dye disappearance using the correct stoichiometric factor of 32\frac{3}{2}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dividing Concentration by Volume

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused mass concentration (an intensive property in mg/L\text{mg/L}) with total mass (an extensive property in mg\text{mg}), leading you to divide by the tank volume (2.50 L2.50\text{ L}) when the quantity was already expressed per liter.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inspect the Units of the Given Quantity
  • A quantity with units of mass/volume\text{mass/volume} (such as mg/L\text{mg/L} or g/L\text{g/L}) is already a concentration, not a total amount.

  • Check whether the given value has volume in the denominator before dividing by container volume.

Converting to Molar Concentration
  • Molar concentration (mol/L)=Mass concentration (g/L)Molar mass (g/mol)\text{Molar concentration (mol/L)} = \frac{\text{Mass concentration (g/L)}}{\text{Molar mass (g/mol)}}. Container volume is not involved in this conversion.

  • Divide mass concentration directly by molar mass to get molarity without using the container volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Δ[Dye]=0.135 g/L270.3 g/mol=4.994×10−4 mol/L=499.4 μmol/L\Delta [\text{Dye}] = \frac{0.135\text{ g/L}}{270.3\text{ g/mol}} = 4.994 \times 10^{-4}\text{ mol/L} = 499.4\text{ }\mu\text{mol/L}

  2. -Δ[Dye]Δt\frac{\Delta[\text{Dye}]}{\Delta t} = 499.4 μmol/L2700 s\frac{499.4\text{ }\mu\text{mol/L}}{2700\text{ s}} = 0.185\text{ }$$\mu$$\text{mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{s}^{-1} = 1.85 ×\times 10^{-7}\text{ mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{s}^{-1}$

  3. -Δ[OX3]Δt\frac{\Delta[\ce{O3}]}{\Delta t} = \frac{3}{2}$$\left(1.850 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}\right) = 2.78 ×\times 10^{-7}\text{ mol}$$\cdot$$\text{L}^{-1}\cdot$$\text{s}^{-1}$

Final answer

(a) −Δ[Dye]Δt=0.185 μmol⋅L−1⋅s−1-\frac{\Delta[\text{Dye}]}{\Delta t} = 0.185\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}; (b) −Δ[OX3]Δt=2.78×10−7 mol⋅L−1⋅s−1-\frac{\Delta[\ce{O3}]}{\Delta t} = 2.78 \times 10^{-7}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always track units through each step: notice that mg/LL\frac{\text{mg/L}}{\text{L}} yields mg/L2\text{mg/L}^2, which signals an unintended extra division.

  • Before using a container volume, verify whether the problem gives a total quantity (grams, moles) or an intensive quantity (concentration, density).

Lock it in

Similar question

01

A reactant AA decreases in concentration from 0.600 M0.600\text{ M} to 0.240 M0.240\text{ M} over 12.0 min12.0\text{ min}. Calculate the average rate of disappearance of AA in mol⋅L−1⋅s−1\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

Answer

5.00×10−4 mol⋅L−1⋅s−15.00 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}. Key steps: Δ[A]=0.600−0.240=0.360 M\Delta[A] = 0.600 - 0.240 = 0.360\text{ M}; Δt=12.0 min×60 s/min=720 s\Delta t = 12.0\text{ min} \times 60\text{ s/min} = 720\text{ s}; Rate=0.360 M720 s=5.00×10−4 M⋅s−1\text{Rate} = \frac{0.360\text{ M}}{720\text{ s}} = 5.00 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}.

02

For the reaction 2NO2(g)→2NO(g)+O2(g)2\text{NO}_2(g) \rightarrow 2\text{NO}(g) + \text{O}_2(g), the concentration of NO2\text{NO}_2 decreases by 0.0480 mol/L0.0480\text{ mol/L} over an interval of 8.00 min8.00\text{ min}. Find: (a) the rate of disappearance of NO2\text{NO}_2 in μmol⋅L−1⋅s−1\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}, and (b) the rate of formation of O2\text{O}_2 in mol⋅L−1⋅s−1\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

Answer

(a) 100 μmol⋅L−1⋅s−1100\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}; (b) 5.00×10−5 mol⋅L−1⋅s−15.00 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}. Key steps: Δt=8.00×60=480 s\Delta t = 8.00 \times 60 = 480\text{ s}; (a) −Δ[NO2]Δt=48000 μmol/L480 s=100 μmol⋅L−1⋅s−1-\frac{\Delta[\text{NO}_2]}{\Delta t} = \frac{48000\text{ }\mu\text{mol/L}}{480\text{ s}} = 100\text{ }\mu\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}; (b) Δ[O2]Δt=12(−Δ[NO2]Δt)=12×0.0480 M480 s=5.00×10−5 M⋅s−1\frac{\Delta[\text{O}_2]}{\Delta t} = \frac{1}{2}\left(-\frac{\Delta[\text{NO}_2]}{\Delta t}\right) = \frac{1}{2} \times \frac{0.0480\text{ M}}{480\text{ s}} = 5.00 \times 10^{-5}\text{ M}\cdot\text{s}^{-1}.

03

In a catalytic converter test, the oxidation of carbon monoxide follows 2CO(g)+O2(g)→2CO2(g)2\text{CO}(g) + \text{O}_2(g) \rightarrow 2\text{CO}_2(g). A 5.00 L5.00\text{ L} vessel contains CO\text{CO} whose mass decreases by 0.420 g0.420\text{ g} over 2.50 min2.50\text{ min}. Given the molar mass of CO\text{CO} is 28.01 g/mol28.01\text{ g/mol}, find the rate of consumption of O2\text{O}_2 in mol⋅L−1⋅s−1\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}.

Answer

1.00×10−5 mol⋅L−1⋅s−11.00 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}. Key steps: Δn(CO)=0.420 g28.01 g/mol=0.0150 mol\Delta n(\text{CO}) = \frac{0.420\text{ g}}{28.01\text{ g/mol}} = 0.0150\text{ mol}; Δ[CO]=0.0150 mol5.00 L=0.00300 M\Delta[\text{CO}] = \frac{0.0150\text{ mol}}{5.00\text{ L}} = 0.00300\text{ M}; Δt=2.50 min×60=150 s\Delta t = 2.50\text{ min} \times 60 = 150\text{ s}; Rate of CO\text{CO} loss =0.00300 M150 s=2.00×10−5 M⋅s−1= \frac{0.00300\text{ M}}{150\text{ s}} = 2.00 \times 10^{-5}\text{ M}\cdot\text{s}^{-1}; Rate of O2\text{O}_2 consumption =12×2.00×10−5=1.00×10−5 M⋅s−1= \frac{1}{2} \times 2.00 \times 10^{-5} = 1.00 \times 10^{-5}\text{ M}\cdot\text{s}^{-1}.

Loading workspace…