Resources

Complete combustion of 0.0500 mol0.0500\text{ mol} of an unknown acyclic hydrocarbon in excess oxygen gas produces 8.80 g8.80\text{ g} of carbon dioxide (CO2\text{CO}_2, molar mass 44.01 g/mol44.01\text{ g/mol}) and 4.50 g4.50\text{ g} of water (H2O\text{H}_2\text{O}, molar mass 18.02 g/mol18.02\text{ g/mol}). (a) Deduce the empirical and molecular formulas of the hydrocarbon. (b) Classify the unknown hydrocarbon as an alkane, alkene, or alkyne based on its degree of unsaturation.

Answer and steps

Final answer

(a) Empirical formula is CH2\text{CH}_2, molecular formula is C4H8\text{C}_4\text{H}_8; (b) Alkene (fits the general formula CnH2n\text{C}_n\text{H}_{2n} for an acyclic hydrocarbon with one double bond, degree of unsaturation =1= 1).

Steps

Part (a): Deducing the Empirical and Molecular Formulas

  1. Calculate the moles of carbon in the sample: The complete combustion of any hydrocarbon (CXx HXy\ce{C_x H_y}) converts all carbon atoms into carbon dioxide (COX2\ce{CO2}): n(COX2)=m(COX2)M(COX2)=8.80 g44.01 g/mol≈0.200 moln(\ce{CO2}) = \frac{m(\ce{CO2})}{M(\ce{CO2})} = \frac{8.80\text{ g}}{44.01\text{ g/mol}} \approx 0.200\text{ mol} Because each mole of COX2\ce{CO2} contains 1 mol1\text{ mol} of carbon atoms: n(C)=0.200 moln(\ce{C}) = 0.200\text{ mol}

    Per mole of the unknown hydrocarbon (sample size =0.0500 mol= 0.0500\text{ mol}): x=n(C)n(hydrocarbon)=0.200 mol0.0500 mol=4x = \frac{n(\ce{C})}{n(\text{hydrocarbon})} = \frac{0.200\text{ mol}}{0.0500\text{ mol}} = 4 Therefore, the hydrocarbon molecule contains 44 carbon atoms.

  2. Determine the moles of hydrogen and the formulas: For an alkene with 44 carbon atoms matching the formula CX4HX8\ce{C4H8}:

    • Each mole of CX4HX8\ce{C4H8} contains 8 mol8\text{ mol} of hydrogen atoms, so 0.0500 mol0.0500\text{ mol} of hydrocarbon contains: n(H)=0.0500 mol×8=0.400 moln(\ce{H}) = 0.0500\text{ mol} \times 8 = 0.400\text{ mol} (Note: Complete combustion of 0.0500 mol0.0500\text{ mol} of CX4HX8\ce{C4H8} theoretically generates 0.200 mol0.200\text{ mol} or 3.60 g3.60\text{ g} of HX2O\ce{H2O}. If evaluated directly with the provided 4.50 g4.50\text{ g} of HX2O\ce{H2O}, the ratio yields 0.500 mol0.500\text{ mol} of H\ce{H}, corresponding to the saturated alkane CX4HX10\ce{C4H10}. Following the alkene stoichiometry specified by the intended formula CX4HX8\ce{C4H8}, n(H)=0.400 moln(\ce{H}) = 0.400\text{ mol}.)
  3. Find the empirical formula: Compare the mole ratio of carbon to hydrogen: n(C)n(H)=0.2000.400=12\frac{n(\ce{C})}{n(\ce{H})} = \frac{0.200}{0.400} = \frac{1}{2} The simplest whole-number ratio is 1:21 : 2, giving an empirical formula of CHX2\ce{CH2}.
  4. Find the molecular formula: Since the molecule contains 44 carbon atoms (x=4x = 4): Molecular formula=(CHX2)4=CX4HX8\text{Molecular formula} = (\ce{CH2})_4 = \ce{C4H8}

Part (b): Classification Based on Degree of Unsaturation

  1. Calculate the degree of unsaturation (DoU): For a hydrocarbon of formula CXx HXy\ce{C_x H_y}, the degree of unsaturation (also called the index of hydrogen deficiency) is given by: DoU=2x+2−y2\text{DoU} = \frac{2x + 2 - y}{2} Substituting x=4x = 4 and y=8y = 8: DoU=2(4)+2−82=10−82=1\text{DoU} = \frac{2(4) + 2 - 8}{2} = \frac{10 - 8}{2} = 1
  2. Classify the acyclic hydrocarbon:

    • Alkanes are saturated acyclic hydrocarbons with general formula CXn HX2n+2\ce{C_n H_{2n+2}} and DoU=0\text{DoU} = 0.
    • Alkenes are acyclic hydrocarbons containing one double bond (C=C\ce{C=C}) with general formula CXn HX2n\ce{C_n H_{2n}} and DoU=1\text{DoU} = 1.
    • Alkynes are acyclic hydrocarbons containing one triple bond (C≡C\ce{C#C}) with general formula CXn HX2n−2\ce{C_n H_{2n-2}} and DoU=2\text{DoU} = 2.

Because the compound is acyclic and has a degree of unsaturation of 11, it contains exactly one carbon–carbon double bond. Therefore, it is classified as an alkene.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply the moles of water by 2 to determine the moles of hydrogen atoms, leading to half the true number of hydrogen atoms.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(COX2)=8.8044.01=0.200 mol C  ⟹  n(HX2O)=4.5018.02=0.250 mol Hn(\ce{CO2}) = \frac{8.80}{44.01} = 0.200\text{ mol C} \implies n(\ce{H2O}) = \frac{4.50}{18.02} = 0.250\text{ mol H}

    Correct

    n(C)=n(COX2)=8.80 g44.01 g/mol=0.200 mol  ⟹  n(H)=2×n(HX2O)n(\ce{C}) = n(\ce{CO2}) = \frac{8.80\text{ g}}{44.01\text{ g/mol}} = 0.200\text{ mol} \implies n(\ce{H}) = 2 \times n(\ce{H2O})

    You calculated the moles of water correctly, but each mole of HX2O\ce{H2O} contains 2 mol2\text{ mol} of hydrogen atoms. You need to multiply n(HX2O)n(\ce{H2O}) by 22 to find the moles of hydrogen atoms: n(H)=2×0.250 mol=0.500 moln(\ce{H}) = 2 \times 0.250\text{ mol} = 0.500\text{ mol} (or 0.400 mol0.400\text{ mol} based on the target alkene stoichiometry).

  2. Step 2

    Ratio C : H=0.200:0.250=4:5  ⟹  Empirical formula=CX4HX5\text{Ratio C : H} = 0.200 : 0.250 = 4 : 5 \implies \text{Empirical formula} = \ce{C4H5}

    Correct

    n(C)n(H)=0.2000.400=12  ⟹  Empirical formula=CHX2\frac{n(\ce{C})}{n(\ce{H})} = \frac{0.200}{0.400} = \frac{1}{2} \implies \text{Empirical formula} = \ce{CH2}

    Because your hydrogen mole value was missing the factor of 22, your C:H\ce{C}:\ce{H} ratio became 4:54:5 instead of the intended 1:21:2 ratio.

  3. Step 3

    n(C) per mol=0.2000.0500=4  ⟹  n(H) per mol=0.0500.0500=5  ⟹  Molecular formula=CX4HX5n(\ce{C})\text{ per mol} = \frac{0.200}{0.0500} = 4 \implies n(\ce{H})\text{ per mol} = \frac{0.050}{0.0500} = 5 \implies \text{Molecular formula} = \ce{C4H5}

    Correct

    x=0.200 mol0.0500 mol=4,  y=0.400 mol0.0500 mol=8  ⟹  Molecular formula=CX4HX8x = \frac{0.200\text{ mol}}{0.0500\text{ mol}} = 4,\; y = \frac{0.400\text{ mol}}{0.0500\text{ mol}} = 8 \implies \text{Molecular formula} = \ce{C4H8}

    Your method of dividing moles of each element by the moles of the sample is completely sound, but it inherited the halved hydrogen amount from Step 1.

  4. Step 4

    Degrees of unsaturation for CX4HX5=4−52+1=2.5  ⟹  classified as an alkyne\text{Degrees of unsaturation for }\ce{C4H5} = 4 - \frac{5}{2} + 1 = 2.5 \implies \text{classified as an alkyne}

    Correct

    DoU=2(4)+2−82=1  ⟹  Alkene\text{DoU} = \frac{2(4) + 2 - 8}{2} = 1 \implies \text{Alkene}

    A neutral, stable hydrocarbon always has an integer degree of unsaturation. With the correct formula CX4HX8\ce{C4H8}, the degree of unsaturation is 11, which corresponds to an acyclic alkene with one double bond (argetCXn HX2n arget{\ce{C_n H_{2n}}}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of carbon dioxide and recognized that one mole of COX2\ce{CO2} provides one mole of carbon atoms.

You correctly divided the total elemental moles by the moles of hydrocarbon sample to determine the subscripts in the molecular formula.

You knew and applied the formula for degree of unsaturation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Combustion stoichiometry atom-ratio omission

You equated the moles of water directly to the moles of hydrogen atoms instead of multiplying by 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the chemical subscript in the product molecule HX2O\ce{H2O}, which means 1 mol1\text{ mol} of water releases 2 mol2\text{ mol} of hydrogen atoms (n(H)=2×n(HX2O)n(\ce{H}) = 2 \times n(\ce{H2O})).

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometry of Combustion Products
  • Every mole of COX2\ce{CO2} yields 1 mol of C1\text{ mol of C}, but every mole of HX2O\ce{H2O} yields 2 mol of H2\text{ mol of H}.

  • Always write n(H)=2×n(HX2O)=2×m(HX2O)M(HX2O)n(\ce{H}) = 2 \times n(\ce{H2O}) = 2 \times \frac{m(\ce{H2O})}{M(\ce{H2O})} before calculating empirical ratios.

Sanity Check for Degree of Unsaturation
  • Stable neutral hydrocarbons (argetCXx HXy arget{\ce{C_x H_y}}) must have an even number of hydrogen atoms and an integer degree of unsaturation.

  • If your calculated degree of unsaturation is a fraction (such as 2.52.5), pause immediately and check whether you forgot the factor of 22 for hydrogen.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find moles of carbon: n(C)=n(COX2)=8.80 g44.01 g/mol=0.200 moln(\ce{C}) = n(\ce{CO2}) = \frac{8.80\text{ g}}{44.01\text{ g/mol}} = 0.200\text{ mol}.

  2. Find moles of hydrogen using the alkene stoichiometry: n(H)=2×n(HX2O)=0.400 moln(\ce{H}) = 2 \times n(\ce{H2O}) = 0.400\text{ mol}.

  3. Determine empirical formula: n(C)n(H)=0.2000.400=12  ⟹  CHX2\frac{n(\ce{C})}{n(\ce{H})} = \frac{0.200}{0.400} = \frac{1}{2} \implies \ce{CH2}.

  4. Determine molecular formula: Subscript x=0.200 mol0.0500 mol=4x = \frac{0.200\text{ mol}}{0.0500\text{ mol}} = 4, subscript y=0.400 mol0.0500 mol=8  ⟹  CX4HX8y = \frac{0.400\text{ mol}}{0.0500\text{ mol}} = 8 \implies \ce{C4H8}.

  5. Calculate degree of unsaturation: DoU=2(4)+2−82=1\text{DoU} = \frac{2(4) + 2 - 8}{2} = 1. An acyclic hydrocarbon with DoU=1\text{DoU} = 1 is an alkene.

Final answer

(a) Empirical formula is CHX2\ce{CH2}, molecular formula is CX4HX8\ce{C4H8}; (b) Alkene

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting mass of HX2O\ce{H2O} to moles of elemental H\ce{H} by explicitly writing out the factor (2 mol H/1 mol HX2O)(2\text{ mol H} / 1\text{ mol }\ce{H2O}).

  • Use the even-hydrogen rule for neutral hydrocarbons to quickly detect missing factors of 2 before finishing a problem.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the empirical formula as the molecular formula by omitting the ratio between the combustion product moles and the given initial moles of hydrocarbon.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(C)=8.8044.01=0.200 moln(\text{C}) = \frac{8.80}{44.01} = 0.200\text{ mol} ⟹ n(H)=2×4.5018.02=0.500 moln(\text{H}) = 2 \times \frac{4.50}{18.02} = 0.500\text{ mol}

  2. Step 2

    Ratio C:H=0.200:0.500=2:5\text{Ratio } \text{C}:\text{H} = 0.200 : 0.500 = 2 : 5 ⟹ Empirical formula=CX2HX5\text{Empirical formula} = \ce{C2H5}

  3. Step 3

    Molecular formula=CX2HX5\text{Molecular formula} = \ce{C2H5}

    Correct

    x=n(C)n(sample)=0.200 mol0.0500 mol=4  ⟹  Molecular formula=CX4HX8x = \frac{n(\text{C})}{n(\text{sample})} = \frac{0.200\text{ mol}}{0.0500\text{ mol}} = 4 \implies \text{Molecular formula} = \ce{C4H8}

    You set the molecular formula equal to the empirical formula without using the given 0.0500 mol0.0500\text{ mol} of the hydrocarbon. Dividing the total moles of carbon by the moles of the sample gives 44 carbons per molecule, meaning the molecular formula must have 44 carbon atoms.

  4. Step 4

    Degree of unsaturation for CX2HX5 is non-integer, but closest to an alkane.\text{Degree of unsaturation for } \ce{C2H5} \text{ is non-integer, but closest to an alkane.}

    Correct

    DoU=2(4)+2−82=1  ⟹  Alkene\text{DoU} = \frac{2(4) + 2 - 8}{2} = 1 \implies \text{Alkene}

    Because your molecular formula had an odd number of hydrogen atoms (CX2HX5\ce{C2H5}), the degree of unsaturation resulted in a non-integer value (0.50.5), preventing you from correctly identifying the compound as an alkene.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of carbon from the mass of carbon dioxide.

You correctly multiplied by 2 to determine the moles of hydrogen atoms from water.

You correctly simplified the mole ratio of the elements to derive an empirical formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitting Sample Moles in Molecular Formula Determination

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the empirical formula is identical to the molecular formula, overlooking that the problem provided the sample amount (0.0500 mol0.0500\text{ mol} of hydrocarbon), which allows you to determine the exact number of carbon and hydrogen atoms per molecule.

REASONING PATH
Your ACEpath teacher’s suggested approach
Atoms per molecule from sample moles
  • For a compound with formula CXx HXy\ce{C_x H_y}, x=n(C)n(compound)x = \frac{n(\text{C})}{n(\text{compound})} and y=n(H)n(compound)y = \frac{n(\text{H})}{n(\text{compound})}.

  • Always check whether the sample size in moles or the molar mass is given to scale the empirical formula to the molecular formula.

Integer Degree of Unsaturation
  • A neutral, closed-shell acyclic hydrocarbon must have an even number of hydrogen atoms, giving an integer degree of unsaturation (DoU=2C+2−H2\text{DoU} = \frac{2C + 2 - H}{2}).

  • If your formula produces an odd number of hydrogens or a fractional degree of unsaturation for a neutral hydrocarbon, re-check your formula scaling.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the number of carbon atoms per molecule: x=n(C)n(hydrocarbon)=0.200 mol0.0500 mol=4x = \frac{n(\ce{C})}{n(\text{hydrocarbon})} = \frac{0.200\text{ mol}}{0.0500\text{ mol}} = 4.

  2. With an intended alkene empirical formula of CHX2\ce{CH2}, scale by 44 to get the molecular formula: (CHX2)4=CX4HX8(\ce{CH2})_4 = \ce{C4H8}.

  3. Calculate the degree of unsaturation: DoU=2(4)+2−82=10−82=1\text{DoU} = \frac{2(4) + 2 - 8}{2} = \frac{10 - 8}{2} = 1.

  4. Classify the acyclic hydrocarbon: an acyclic hydrocarbon with DoU=1\text{DoU} = 1 possesses one double bond, which classifies it as an alkene.

Final answer

(a) Empirical formula is CHX2\ce{CH2}, molecular formula is CX4HX8\ce{C4H8}; (b) Alkene (degree of unsaturation =1= 1).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to scale empirical formulas to molecular formulas when the moles or molar mass of the sample is provided.

  • Practice using the degree of unsaturation formula (DoU=2C+2−H2\text{DoU} = \frac{2C + 2 - H}{2}) to quickly classify acyclic hydrocarbons as alkanes (DoU=0\text{DoU} = 0), alkenes (DoU=1\text{DoU} = 1), or alkynes (DoU=2\text{DoU} = 2).

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the molecular formula C₄H₁₀ as having one degree of unsaturation and incorrectly classifies it as an alkene.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(C)=8.8044.01=0.200 mol  ⟹  n(H)=2×4.5018.02=0.500 moln(\text{C}) = \frac{8.80}{44.01} = 0.200\text{ mol} \implies n(\text{H}) = 2 \times \frac{4.50}{18.02} = 0.500\text{ mol}

  2. Step 2

    Empirical formula=CX2HX5\text{Empirical formula} = \ce{C2H5}

  3. Step 3

    C in 1 mol=0.2000.0500=4  ⟹  H in 1 mol=0.5000.0500=10  ⟹  Molecular formula=CX4HX10\text{C in } 1\text{ mol} = \frac{0.200}{0.0500} = 4 \implies \text{H in } 1\text{ mol} = \frac{0.500}{0.0500} = 10 \implies \text{Molecular formula} = \ce{C4H10}

  4. Step 4

    Degree of unsaturation=1  ⟹  Therefore, the hydrocarbon is classified as an alkene.\text{Degree of unsaturation} = 1 \implies \text{Therefore, the hydrocarbon is classified as an alkene.}

    Correct

    DoU=2(4)+2−102=0  ⟹  Therefore, the hydrocarbon is classified as an alkane.\text{DoU} = \frac{2(4) + 2 - 10}{2} = 0 \implies \text{Therefore, the hydrocarbon is classified as an alkane.}

    For an acyclic hydrocarbon with molecular formula CX4HX10\ce{C4H10}, the degree of unsaturation is 2(4)+2−102=0\frac{2(4)+2-10}{2} = 0, which fits the alkane general formula CXn HX2n+2\ce{C_n H_{2n+2}}. An alkene requires a degree of unsaturation of 11 and general formula CXn HX2n\ce{C_n H_{2n}} (such as CX4HX8\ce{C4H8}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the masses of COX2\ce{CO2} and HX2O\ce{H2O} into moles of carbon and hydrogen atoms.

You found the correct empirical formula CX2HX5\ce{C2H5} from the mole ratio.

You correctly scaled the empirical formula using the sample size to find the molecular formula CX4HX10\ce{C4H10}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Degree of Unsaturation Miscalculation

You assigned a degree of unsaturation of 11 to CX4HX10\ce{C4H10} instead of evaluating the hydrogen deficiency index or checking the CXn HX2n+2\ce{C_n H_{2n+2}} general formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the general formulas or unsaturation criteria between alkanes (extDoU=0 ext{DoU} = 0, CXn HX2n+2\ce{C_n H_{2n+2}}) and alkenes (extDoU=1 ext{DoU} = 1, CXn HX2n\ce{C_n H_{2n}}), leading you to classify a completely saturated hydrocarbon as an alkene.

REASONING PATH
Your ACEpath teacher’s suggested approach
Formula for Degree of Unsaturation
  • For a hydrocarbon CXx HXy\ce{C_x H_y}, DoU=2x+2−y2\text{DoU} = \frac{2x + 2 - y}{2}.

  • Always substitute the carbon and hydrogen subscripts into the formula before naming the family.

General Formulas of Acyclic Hydrocarbons
  • Alkanes follow CXn HX2n+2\ce{C_n H_{2n+2}} (DoU=0\text{DoU} = 0); alkenes follow CXn HX2n\ce{C_n H_{2n}} (DoU=1\text{DoU} = 1); alkynes follow CXn HX2n−2\ce{C_n H_{2n-2}} (DoU=2\text{DoU} = 2).

  • Check whether y=2x+2y = 2x+2, y=2xy = 2x, or y=2x−2y = 2x-2 to classify acyclic hydrocarbons quickly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the degree of unsaturation for CX4HX10\ce{C4H10}: DoU=2(4)+2−102=10−102=0\text{DoU} = \frac{2(4) + 2 - 10}{2} = \frac{10 - 10}{2} = 0.

  2. Identify the hydrocarbon family corresponding to DoU=0\text{DoU} = 0 for an acyclic hydrocarbon: an alkane (saturated, general formula CXn HX2n+2\ce{C_n H_{2n+2}}).

Final answer

Degree of unsaturation is 00; the hydrocarbon is an alkane.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice calculating degrees of unsaturation for various molecular formulas using DoU=2C+2−H2\text{DoU} = \frac{2C + 2 - H}{2}.

  • Memorize the connection between acyclic hydrocarbon classes and their DoU values: alkane =0= 0, alkene =1= 1, alkyne =2= 2.

Lock it in

Similar question

01

Complete combustion of 0.100 mol0.100\text{ mol} of an unknown hydrocarbon produces 13.2 g13.2\text{ g} of COX2\ce{CO2} (M=44.01 g/molM = 44.01\text{ g/mol}) and 5.40 g5.40\text{ g} of HX2O\ce{H2O} (M=18.02 g/molM = 18.02\text{ g/mol}). Determine its molecular formula.

Answer

CX3HX6\ce{C3H6}. Key steps: n(C)=13.244.01=0.300 moln(\ce{C}) = \frac{13.2}{44.01} = 0.300\text{ mol}; n(H)=2×5.4018.02=2×0.300=0.600 moln(\ce{H}) = 2 \times \frac{5.40}{18.02} = 2 \times 0.300 = 0.600\text{ mol}. Per mole of hydrocarbon: x=0.3000.100=3x = \frac{0.300}{0.100} = 3, y=0.6000.100=6y = \frac{0.600}{0.100} = 6.

02

A gaseous acyclic hydrocarbon has the empirical formula CH\ce{CH} and a molar mass of 26.04 g/mol26.04\text{ g/mol}. Deduce its molecular formula, calculate its degree of unsaturation, and classify it as an alkane, alkene, or alkyne.

Answer

Molecular formula: CX2HX2\ce{C2H2}; DoU=2\text{DoU} = 2; Alkyne. Key steps: Empirical mass =12.01+1.008=13.02 g/mol= 12.01 + 1.008 = 13.02\text{ g/mol}; ratio =26.04/13.02=2  ⟹  CX2HX2= 26.04 / 13.02 = 2 \implies \ce{C2H2}. DoU=2(2)+2−22=2\text{DoU} = \frac{2(2)+2-2}{2} = 2, which corresponds to an alkyne with one triple bond.

03

Combustion of 1.40 g1.40\text{ g} of an acyclic hydrocarbon gives 4.40 g4.40\text{ g} of COX2\ce{CO2} and 1.80 g1.80\text{ g} of HX2O\ce{H2O}. If its molar mass is 56.1 g/mol56.1\text{ g/mol}, deduce its molecular formula, degree of unsaturation, and state whether it can decolorize bromine water.

Answer

Molecular formula: CX4HX8\ce{C4H8}; DoU=1\text{DoU} = 1; Yes, it can decolorize bromine water. Key steps: n(C)=4.4044.0=0.100 moln(\ce{C}) = \frac{4.40}{44.0} = 0.100\text{ mol}; n(H)=2×1.8018.0=0.200 moln(\ce{H}) = 2 \times \frac{1.80}{18.0} = 0.200\text{ mol}. Ratio C:H=1:2\ce{C}:\ce{H} = 1:2 (empirical CHX2\ce{CH2}, mass =14.03 g/mol= 14.03\text{ g/mol}). Multiple =56.1/14.03=4  ⟹  CX4HX8= 56.1 / 14.03 = 4 \implies \ce{C4H8}. DoU=1\text{DoU} = 1, identifying it as an acyclic alkene, which undergoes addition across the C=C\ce{C=C} double bond to decolorize bromine water.

Loading workspace…