Resources

A student analyzes an exothermic gas-phase synthesis reaction: 2NO2(g)→N2O4(g)2\text{NO}_2(g) \rightarrow \text{N}_2\text{O}_4(g), which has a standard enthalpy change of ΔHrxn∘=−57.2 kJ\Delta H_{\text{rxn}}^\circ = -57.2\text{ kJ}. When 0.400 mol0.400\text{ mol} of NO2(g)\text{NO}_2(g) reacts completely to form 0.200 mol0.200\text{ mol} of N2O4(g)\text{N}_2\text{O}_4(g) under a constant external atmospheric pressure of 1.00 atm1.00\text{ atm} at a constant temperature of 298 K298\text{ K}, the system undergoes a net volume contraction (Δngas=−0.200 mol\Delta n_{\text{gas}} = -0.200\text{ mol}). Using the thermodynamic sign convention ΔU=q+w\Delta U = q + w (where work done on the system by the surroundings is positive, w=−PΔVw = -P\Delta V): (a) State the algebraic sign of heat qpq_p and work ww. (b) Calculate the exact numerical values of heat qq and internal energy change ΔU\Delta U of the system in kJ\text{kJ}.

Answer and steps

Final answer

(a) q<0q < 0 (exothermic, heat released by system) and w>0w > 0 (work done on system during compression); (b) q=−11.4 kJq = -11.4\text{ kJ} and ΔU=−10.9 kJ\Delta U = -10.9\text{ kJ}

Steps

Part (a): Determining the Signs of Heat (qpq_p) and Work (ww)

  1. Sign of Heat (qpq_p):

    • The reaction is exothermic, meaning energy is transferred from the chemical system to the surroundings as heat.
    • Under constant pressure, heat flow is equal to the enthalpy change (qp=ΔHq_p = \Delta H).
    • Since energy leaves the system, the sign is negative: qp<0q_p < 0
  2. Sign of Work (ww):

    • The system undergoes a volume contraction because the number of moles of gas decreases (Δngas=nfinal−ninitial=0.200 mol−0.400 mol=−0.200 mol<0\Delta n_{\text{gas}} = n_{\text{final}} - n_{\text{initial}} = 0.200\text{ mol} - 0.400\text{ mol} = -0.200\text{ mol} < 0).
    • As the gas volume decreases (ΔV<0\Delta V < 0), the surroundings compress the system and do work on it.
    • Using the pressure-volume work formula w=−PΔVw = -P\Delta V: w=−PΔV>0w = -P\Delta V > 0
    • Therefore, ww is positive (w>0w > 0).

Part (b): Calculating the Numerical Values of qq and ΔU\Delta U

  1. Calculate the Heat Transferred (qq):

    • The given molar enthalpy of reaction, ΔHrxn∘=−57.2 kJ\Delta H_{\text{rxn}}^\circ = -57.2\text{ kJ}, corresponds to the stoichiometric reaction forming 1 mol1\text{ mol} of NX2OX4(g)\ce{N2O4(g)}.
    • Here, 0.200 mol0.200\text{ mol} of NX2OX4(g)\ce{N2O4(g)} is produced: q=qp=nNX2OX4⋅ΔHrxn∘q = q_p = n_{\ce{N2O4}} \cdot \Delta H_{\text{rxn}}^\circ q=(0.200 mol)(−57.2 kJ⋅mol−1)=−11.44 kJ≈−11.4 kJq = (0.200\text{ mol})(-57.2\text{ kJ}\cdot\text{mol}^{-1}) = -11.44\text{ kJ} \approx -11.4\text{ kJ}
  2. Calculate the Pressure-Volume Work (ww):

    • Assuming ideal gas behavior at constant temperature and pressure, PΔV=ΔngasRTP\Delta V = \Delta n_{\text{gas}} R T.
    • Thus, the work done on the system is: w=−ΔngasRTw = -\Delta n_{\text{gas}} R T
    • Substituting the values (R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}, T=298 KT = 298\text{ K}, and Δngas=−0.200 mol\Delta n_{\text{gas}} = -0.200\text{ mol}): w=−(−0.200 mol)(8.314 J⋅mol−1⋅K−1)(298 K)=+495.5 J=+0.4955 kJw = -(-0.200\text{ mol})(8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(298\text{ K}) = +495.5\text{ J} = +0.4955\text{ kJ}
  3. Calculate the Change in Internal Energy (ΔU\Delta U):

    • By the first law of thermodynamics: ΔU=q+w\Delta U = q + w ΔU=−11.44 kJ+0.4955 kJ=−10.9445 kJ≈−10.9 kJ\Delta U = -11.44\text{ kJ} + 0.4955\text{ kJ} = -10.9445\text{ kJ} \approx -10.9\text{ kJ}

Common Pitfall: When calculating work using w=−ΔngasRTw = -\Delta n_{\text{gas}} R T, ensure units match before adding qq and ww. The gas constant R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} yields work in joules (J\text{J}), which must be converted to kilojoules (kJ\text{kJ}) before summing with ΔH\Delta H.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student reverses the sign of work by confusing work done on the system during contraction with work done by the system, setting w = PΔV = -0.496 kJ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Exothermic reaction releases heat: qp<0\text{Exothermic reaction releases heat: } q_p < 0

  2. Step 2

    Volume decreases so work is done by the system: w<0\text{Volume decreases so work is done by the system: } w < 0

    Correct

    Volume decreases (compression), so work is done on the system by the surroundings: w>0\text{Volume decreases (compression), so work is done on the system by the surroundings: } w > 0

    When volume decreases (ΔV<0\Delta V < 0), the external surroundings push inward on the system. Under the thermodynamic sign convention w=−PΔVw = -P\Delta V, work done on the system is positive (w>0w > 0).

  3. Step 3

    q=0.200 mol×(−57.2 kJ/mol)=−11.44 kJq = 0.200\text{ mol} \times (-57.2\text{ kJ/mol}) = -11.44\text{ kJ}

  4. Step 4

    w=ΔngasRT=(−0.200 mol)(8.314 J/(mol K))(298 K)=−495.5 J=−0.496 kJw = \Delta n_{\text{gas}} R T = (-0.200\text{ mol})(8.314\text{ J/(mol K)})(298\text{ K}) = -495.5\text{ J} = -0.496\text{ kJ}

    Correct

    w=−ΔngasRT=−(−0.200 mol)(8.314 J⋅mol−1⋅K−1)(298 K)=+495.5 J=+0.496 kJw = -\Delta n_{\text{gas}} R T = -(-0.200\text{ mol})(8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(298\text{ K}) = +495.5\text{ J} = +0.496\text{ kJ}

    Because w=−PΔVw = -P\Delta V, applying the ideal gas relation yields w=−ΔngasRTw = -\Delta n_{\text{gas}} R T. Omitting the leading negative sign caused your work value to be negative instead of positive.

  5. Step 5

    ΔU=q+w=−11.44 kJ+(−0.496 kJ)=−11.94 kJ\Delta U = q + w = -11.44\text{ kJ} + (-0.496\text{ kJ}) = -11.94\text{ kJ}

    Correct

    ΔU=q+w=−11.44 kJ+0.496 kJ=−10.94 kJ≈−10.9 kJ\Delta U = q + w = -11.44\text{ kJ} + 0.496\text{ kJ} = -10.94\text{ kJ} \approx -10.9\text{ kJ}

    You applied the First Law of Thermodynamics (ΔU=q+w\Delta U = q + w) correctly, but the result was shifted because it incorporated the incorrect sign for ww.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly reasoned that an exothermic reaction releases heat, giving q<0q < 0.

You accurately calculated the heat flow qq from the reaction stoichiometry and molar enthalpy.

You correctly applied the First Law formula ΔU=q+w\Delta U = q + w and properly converted units between joules and kilojoules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Thermodynamic Work Sign Convention

You omitted the negative sign in the pressure-volume work formula, writing w=ΔngasRTw = \Delta n_{\text{gas}} R T instead of w=−ΔngasRTw = -\Delta n_{\text{gas}} R T.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused work done on the system with work done by the system. During a volume decrease (compression), the surroundings do work on the gas, adding energy to the system, so ww must be positive under the ΔU=q+w\Delta U = q + w convention.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sign of Work During Volume Changes
  • In chemistry, w=−PΔVw = -P\Delta V. Contraction (ΔV<0\Delta V < 0) means w>0w > 0 (work done on system). Expansion (ΔV>0\Delta V > 0) means w<0w < 0 (work done by system).

  • Always write down the full formula w=−PΔV=−ΔngasRTw = -P\Delta V = -\Delta n_{\text{gas}} R T with the leading minus sign before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. w=−ΔngasRT=−(−0.200 mol)(8.314 J⋅mol−1⋅K−1)(298 K)=+495.5 J=+0.496 kJw = -\Delta n_{\text{gas}} R T = -(-0.200\text{ mol})(8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(298\text{ K}) = +495.5\text{ J} = +0.496\text{ kJ}

  2. ΔU=q+w=−11.44 kJ+0.496 kJ=−10.944 kJ≈−10.9 kJ\Delta U = q + w = -11.44\text{ kJ} + 0.496\text{ kJ} = -10.944\text{ kJ} \approx -10.9\text{ kJ}

Final answer

(a) q<0q < 0 and w>0w > 0; (b) q=−11.4 kJq = -11.4\text{ kJ} and ΔU=−10.9 kJ\Delta U = -10.9\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic: Contraction compresses energy into the system (w>0w > 0); expansion pushes energy out (w<0w < 0).

  • Double-check that you always include the negative sign in w=−PΔVw = -P\Delta V and w=−ΔngasRTw = -\Delta n_{\text{gas}}RT.

  • Practice combining qq and ww with different sign combinations to build confidence in calculating ΔU\Delta U.

OverviewACEpath Teacher's Diagnosis

02 The student fails to scale the molar enthalpy change by the actual moles reacted, directly using ΔH_rxn° as q = -57.2 kJ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    qpq_p is negative because heat is released (exothermic) ⟹\Longrightarrow ww is positive because the gas contracts and work is done on the system

  2. Step 2

    q=ΔH=−57.2 kJq = \Delta H = -57.2\text{ kJ}

    Correct

    q=nNX2OX4⋅ΔHrxn∘=(0.200 mol)(−57.2 kJ⋅mol−1)=−11.44 kJ≈−11.4 kJq = n_{\ce{N2O4}} \cdot \Delta H_{\text{rxn}}^\circ = (0.200\text{ mol})(-57.2\text{ kJ}\cdot\text{mol}^{-1}) = -11.44\text{ kJ} \approx -11.4\text{ kJ}

    The standard enthalpy of reaction ΔHrxn∘=−57.2 kJ\Delta H_{\text{rxn}}^\circ = -57.2\text{ kJ} represents the heat released for the stoichiometric amount written in the balanced equation (1 mol1\text{ mol} of NX2OX4\ce{N2O4} formed). Because only 0.200 mol0.200\text{ mol} of NX2OX4\ce{N2O4} is produced, you need to multiply ΔHrxn∘\Delta H_{\text{rxn}}^\circ by 0.200 mol0.200\text{ mol} to obtain q=−11.4 kJq = -11.4\text{ kJ}.

  3. Step 3

    w=−ΔngasRT=−(−0.200 mol)(8.314 J/(mol K))(298 K)=+495.5 J=+0.496 kJw = -\Delta n_{\text{gas}} R T = -(-0.200\text{ mol})(8.314\text{ J/(mol K)})(298\text{ K}) = +495.5\text{ J} = +0.496\text{ kJ}

  4. Step 4

    ΔU=q+w=−57.2 kJ+0.496 kJ=−56.70 kJ\Delta U = q + w = -57.2\text{ kJ} + 0.496\text{ kJ} = -56.70\text{ kJ}

    Correct

    ΔU=q+w=−11.44 kJ+0.496 kJ=−10.94 kJ≈−10.9 kJ\Delta U = q + w = -11.44\text{ kJ} + 0.496\text{ kJ} = -10.94\text{ kJ} \approx -10.9\text{ kJ}

    Your application of the first law ΔU=q+w\Delta U = q + w is mathematically and conceptually sound, but the numerical result is affected by substituting the unscaled value of qq.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly interpreted the physical meaning of exothermic and compression to assign the correct signs to qq and ww.

You applied w=−ΔngasRTw = -\Delta n_{\text{gas}}RT accurately with proper signs and unit conversion from J\text{J} to kJ\text{kJ}.

You correctly set up the first law equation ΔU=q+w\Delta U = q + w.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unscaled Molar Enthalpy Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing standard molar reaction enthalpy ΔHrxn∘\Delta H_{\text{rxn}}^\circ (an intensive/per-mole-of-reaction quantity) with the extensive heat qq released by a specific, non-unit molar quantity of reactants.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scaling Enthalpy to Extent of Reaction
  • Heat at constant pressure relates to enthalpy change by qp=n⋅ΔHrxn∘q_p = n \cdot \Delta H_{\text{rxn}}^\circ, where nn is the moles of reaction completed.

  • Check whether the problem gives a specific mass or mole amount that differs from the coefficients in the balanced equation, and multiply ΔHrxn∘\Delta H_{\text{rxn}}^\circ by the actual moles reacted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Scale the standard molar enthalpy change by the moles of NX2OX4\ce{N2O4} formed: q=(0.200 mol)(−57.2 kJ⋅mol−1)=−11.44 kJq = (0.200\text{ mol})(-57.2\text{ kJ}\cdot\text{mol}^{-1}) = -11.44\text{ kJ}.

  2. Combine the corrected heat with your work value using the first law: ΔU=q+w=−11.44 kJ+0.496 kJ=−10.94 kJ\Delta U = q + w = -11.44\text{ kJ} + 0.496\text{ kJ} = -10.94\text{ kJ}.

Final answer

(a) q<0q < 0, w>0w > 0; (b) q=−11.4 kJq = -11.4\text{ kJ}, ΔU=−10.9 kJ\Delta U = -10.9\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify whether the given ΔHrxn∘\Delta H_{\text{rxn}}^\circ applies to the stoichiometric coefficients or to the actual quantities specified in the problem statement.

  • Practice writing units explicitly as kJ⋅mol−1\text{kJ}\cdot\text{mol}^{-1} for ΔHrxn∘\Delta H_{\text{rxn}}^\circ to make the dimensional need to multiply by moles obvious.

OverviewACEpath Teacher's Diagnosis

03 The student adds work directly in joules without converting to kilojoules, causing a three-orders-of-magnitude unit mismatch when calculating ΔU.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    qp is negative (exothermic reaction)  ⟹  w is positive (volume compression, work done on system)q_p\text{ is negative (exothermic reaction)} \implies w\text{ is positive (volume compression, work done on system)}

  2. Step 2

    q=0.200 mol×(−57.2 kJ/mol)=−11.44 kJq = 0.200\text{ mol} \times (-57.2\text{ kJ/mol}) = -11.44\text{ kJ}

  3. Step 3

    w=−(−0.200 mol)(8.314 J/(mol K))(298 K)=+495.5 Jw = -(-0.200\text{ mol})(8.314\text{ J/(mol K)})(298\text{ K}) = +495.5\text{ J}

  4. Step 4

    ΔU=q+w=−11.44+495.5=+484.06 kJ\Delta U = q + w = -11.44 + 495.5 = +484.06\text{ kJ}

    Correct

    ΔU=q+w=−11.44 kJ+0.4955 kJ=−10.945 kJ≈−10.9 kJ\Delta U = q + w = -11.44\text{ kJ} + 0.4955\text{ kJ} = -10.945\text{ kJ} \approx -10.9\text{ kJ}

    You added heat (in kJ\text{kJ}) and work (in J\text{J}) without converting them to the same unit first. Convert +495.5 J+495.5\text{ J} to +0.4955 kJ+0.4955\text{ kJ} before adding.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the algebraic signs for heat and compression work.

You set up and calculated the heat flow qq accurately using reaction stoichiometry.

You used the ideal gas work formula w=−ΔngasRTw = -\Delta n_{\text{gas}}RT with the correct signs and constants.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit mismatch between joules and kilojoules in thermodynamics

You recognized that ww evaluates to joules, but you combined it directly with heat in kilojoules when applying the first law.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Forgetting to reconcile dimensional units when combining thermodynamic quantities that originate from different formulas (qq from molar enthalpy in kJ\text{kJ}, and ww from the ideal gas constant R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the units of $R$
  • The universal gas constant R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} yields energy values in joules (J\text{J}), not kilojoules (kJ\text{kJ}).

  • Always divide values computed with R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} by 10001000 before adding them to enthalpy changes given in kJ\text{kJ}.

Ensure dimensional consistency before addition
  • Physical quantities can only be summed if they share identical units.

  • Explicitly write out unit tags in your calculation line: ΔU=−11.44 kJ+0.4955 kJ\Delta U = -11.44\text{ kJ} + 0.4955\text{ kJ}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the work value from joules to kilojoules: w=+495.5 J×1 kJ1000 J=+0.4955 kJw = +495.5\text{ J} \times \frac{1\text{ kJ}}{1000\text{ J}} = +0.4955\text{ kJ}.

  2. Sum heat and work with consistent units: ΔU=q+w=−11.44 kJ+0.4955 kJ=−10.9445 kJ\Delta U = q + w = -11.44\text{ kJ} + 0.4955\text{ kJ} = -10.9445\text{ kJ}.

Final answer

q=−11.4 kJq = -11.4\text{ kJ} and ΔU=−10.9 kJ\Delta U = -10.9\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how unit prefixes apply to thermodynamic equations containing both enthalpy (extkJ ext{kJ}) and PVPV-work derived from RR (extJ ext{J}).

  • Practice converting work in joules to kilojoules immediately after evaluating w=−ΔngasRTw = -\Delta n_{\text{gas}}RT.

Lock it in

Similar question

01

A cylinder containing an ideal gas is compressed from 10.0 L10.0\text{ L} to 4.0 L4.0\text{ L} against a constant external pressure of 2.0 atm2.0\text{ atm}. During this process, the gas releases 800 J800\text{ J} of heat to the surroundings. Calculate ww and ΔU\Delta U for the gas in joules (1 L⋅atm=101.3 J1\text{ L}\cdot\text{atm} = 101.3\text{ J}).

Answer

w=+1216 Jw = +1216\text{ J} and ΔU=+416 J\Delta U = +416\text{ J}. Key steps: ΔV=4.0−10.0=−6.0 L\Delta V = 4.0 - 10.0 = -6.0\text{ L}. Work w=−PΔV=−(2.0 atm)(−6.0 L)=+12.0 L⋅atm=+1215.6 J≈+1216 Jw = -P\Delta V = -(2.0\text{ atm})(-6.0\text{ L}) = +12.0\text{ L}\cdot\text{atm} = +1215.6\text{ J} \approx +1216\text{ J}. Since heat is released, q=−800 Jq = -800\text{ J}. Therefore, ΔU=q+w=−800 J+1216 J=+416 J\Delta U = q + w = -800\text{ J} + 1216\text{ J} = +416\text{ J}.

02

Consider the decomposition of solid calcium carbonate: CaCOX3(s)→CaO(s)+COX2(g)\ce{CaCO3(s) -> CaO(s) + CO2(g)}, with ΔHrxn∘=+178.3 kJ/mol\Delta H_{\text{rxn}}^\circ = +178.3\text{ kJ/mol}. When 1.00 mol1.00\text{ mol} of CaCOX3\ce{CaCO3} decomposes completely at 298 K298\text{ K} and 1.00 atm1.00\text{ atm}, calculate qq, ww, and ΔU\Delta U in kJ\text{kJ} (R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}).

Answer

q=+178.3 kJq = +178.3\text{ kJ}, w=−2.48 kJw = -2.48\text{ kJ}, and ΔU=+175.8 kJ\Delta U = +175.8\text{ kJ}. Key steps: Δngas=+1.00 mol\Delta n_{\text{gas}} = +1.00\text{ mol}. Heat q=qp=+178.3 kJq = q_p = +178.3\text{ kJ}. Work w=−ΔngasRT=−(1.00 mol)(8.314 J⋅mol−1⋅K−1)(298 K)=−2478 J≈−2.48 kJw = -\Delta n_{\text{gas}} R T = -(1.00\text{ mol})(8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(298\text{ K}) = -2478\text{ J} \approx -2.48\text{ kJ} (gas expands, doing work on surroundings). Then ΔU=q+w=178.3 kJ+(−2.48 kJ)=+175.8 kJ\Delta U = q + w = 178.3\text{ kJ} + (-2.48\text{ kJ}) = +175.8\text{ kJ}.

03

In a synthesis reaction, 3 mol3\text{ mol} of HX2(g)\ce{H2(g)} and 1 mol1\text{ mol} of NX2(g)\ce{N2(g)} react to form 2 mol2\text{ mol} of NHX3(g)\ce{NH3(g)} at 400 K400\text{ K}. The enthalpy change is ΔH=−92.2 kJ\Delta H = -92.2\text{ kJ}. Assuming ideal gas behavior, calculate the work done ww and the change in internal energy ΔU\Delta U in kJ\text{kJ}.

Answer

w=+6.65 kJw = +6.65\text{ kJ} and ΔU=−85.6 kJ\Delta U = -85.6\text{ kJ}. Key steps: Δngas=2−(3+1)=−2.00 mol\Delta n_{\text{gas}} = 2 - (3 + 1) = -2.00\text{ mol}. Work w=−ΔngasRT=−(−2.00 mol)(8.314 J⋅mol−1⋅K−1)(400 K)=+6651 J≈+6.65 kJw = -\Delta n_{\text{gas}} R T = -(-2.00\text{ mol})(8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(400\text{ K}) = +6651\text{ J} \approx +6.65\text{ kJ}. Internal energy change ΔU=q+w=−92.2 kJ+6.65 kJ=−85.55 kJ≈−85.6 kJ\Delta U = q + w = -92.2\text{ kJ} + 6.65\text{ kJ} = -85.55\text{ kJ} \approx -85.6\text{ kJ}.

Loading workspace…