Resources

A fine chemical manufacturing facility synthesizes an active ester with molar mass 248.30 g/mol248.30\text{ g/mol} via the condensation of an aromatic carboxylic acid (molar mass 180.20 g/mol180.20\text{ g/mol}) and an alcohol (molar mass 86.13 g/mol86.13\text{ g/mol}), generating water (molar mass 18.02 g/mol18.02\text{ g/mol}) as the sole stoichiometric by-product. A pilot sustainability audit of an overnight batch determined that the overall Reaction Mass Efficiency (RME) of the process was exactly 62.30%62.30\%. If the stoichiometric ratio of carboxylic acid to alcohol used in the batch feed was strictly 1:11:1 with zero excess solvent or additives, back-calculate the fractional conversion (reaction yield) achieved in this reactor run.

Answer and steps

Final answer

Yield=66.86%\text{Yield} = 66.86\% (or 0.66860.6686)

Steps

01

Fundamental Definitions and Metrics

In green chemistry and sustainable process engineering, two key metrics evaluate how efficiently mass is utilized in a synthesis:

  • Atom Economy (AE\text{AE}): A theoretical metric representing the maximum possible percentage of reactant mass that ends up in the target molecule, based purely on stoichiometry: AE=Mdesired product∑Mreactants×100%\text{AE} = \frac{M_{\text{desired product}}}{\sum M_{\text{reactants}}} \times 100\%
  • Reaction Mass Efficiency (RME\text{RME}): A practical metric measuring the actual percentage of reactant mass that is incorporated into the isolated desired product in a real reactor run: RME=mdesired product, actual∑mreactants fed×100%\text{RME} = \frac{m_{\text{desired product, actual}}}{\sum m_{\text{reactants fed}}} \times 100\%

02

Deriving the Relationship Under Neat, Stoichiometric Conditions

Consider the esterification reaction: R−COOH+RX′−OH→R−COORX′+HX2O\ce{R-COOH + R'-OH -> R-COOR' + H2O}

Let:

  • Macid=180.20 g/molM_{\ce{acid}} = 180.20\text{ g/mol}
  • Malcohol=86.13 g/molM_{\ce{alcohol}} = 86.13\text{ g/mol}
  • Mester=248.30 g/molM_{\ce{ester}} = 248.30\text{ g/mol}
  • n0n_0 be the moles of each reactant introduced into the batch reactor (since the feed is strictly equimolar, 1:11:1, with no solvent or additives).
  • YY (or Yield\text{Yield}) be the fractional conversion (reaction yield), so the actual moles of active ester produced is nester=Y⋅n0n_{\ce{ester}} = Y \cdot n_0.

The total mass of reactants fed to the reactor is: mreactants fed=n0⋅Macid+n0⋅Malcohol=n0(Macid+Malcohol)m_{\text{reactants fed}} = n_0 \cdot M_{\ce{acid}} + n_0 \cdot M_{\ce{alcohol}} = n_0 (M_{\ce{acid}} + M_{\ce{alcohol}})

The actual mass of active ester isolated is: mester=nester⋅Mester=Y⋅n0⋅Mesterm_{\ce{ester}} = n_{\ce{ester}} \cdot M_{\ce{ester}} = Y \cdot n_0 \cdot M_{\ce{ester}}

Substituting these into the definition of Reaction Mass Efficiency gives: RME=Y⋅n0⋅Mestern0(Macid+Malcohol)=Y⋅(MesterMacid+Malcohol)=Y⋅AE\text{RME} = \frac{Y \cdot n_0 \cdot M_{\ce{ester}}}{n_0 (M_{\ce{acid}} + M_{\ce{alcohol}})} = Y \cdot \left(\frac{M_{\ce{ester}}}{M_{\ce{acid}} + M_{\ce{alcohol}}}\right) = Y \cdot \text{AE}

Thus, for an equimolar reaction run without solvent or auxiliary reagents: Yield=RMEAE=RME⋅Macid+MalcoholMester\text{Yield} = \frac{\text{RME}}{\text{AE}} = \text{RME} \cdot \frac{M_{\ce{acid}} + M_{\ce{alcohol}}}{M_{\ce{ester}}}


03

Calculating the Reaction Yield

Substitute the given stoichiometric molar masses and the audited RME=62.30%=0.6230\text{RME} = 62.30\% = 0.6230:

  1. Calculate the combined molar mass of reactants: Macid+Malcohol=180.20 g/mol+86.13 g/mol=266.33 g/molM_{\ce{acid}} + M_{\ce{alcohol}} = 180.20\text{ g/mol} + 86.13\text{ g/mol} = 266.33\text{ g/mol}
  2. Compute the fractional yield: Y=RMEAE=0.6686(66.86%)Y = \frac{\text{RME}}{\text{AE}} = 0.6686\quad (66.86\%)

04

Common Pitfalls to Avoid

  • Confusing Atom Economy with Reaction Mass Efficiency: Atom economy is an idealized upper bound assuming 100%100\% chemical conversion and theoretical stoichiometry. RME\text{RME} is a real-world metric that accounts for incomplete conversion, unreacted starting materials, and non-stoichiometric feed ratios.
  • Ignoring the Mass of Unreacted Reactants: In a batch sustainability audit, unreacted starting materials remain in the reactor effluent and penalize the RME\text{RME} unless recovered and recycled in subsequent cycles.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses Reaction Mass Efficiency with Atom Economy and incorrectly subtracts the mass of by-product water from the denominator.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total reactant mass=180.20+86.13=266.33 g\text{Total reactant mass} = 180.20 + 86.13 = 266.33\text{ g}

  2. Step 2

    RME=mass of product/(total mass−water mass)  ⟹  Denominator=266.33−18.02=248.31 g\text{RME} = \text{mass of product} / (\text{total mass} - \text{water mass}) \implies \text{Denominator} = 266.33 - 18.02 = 248.31\text{ g}

    Correct

    Denominator=mreactants fed=266.33 g\text{Denominator} = m_{\text{reactants fed}} = 266.33\text{ g}

    Reaction Mass Efficiency (RME\text{RME}) is defined as the mass of isolated target product divided by the total mass of all reactants fed into the reactor. You should not subtract stoichiometric by-products such as water from the denominator; the formation of waste is part of what penalizes green metrics.

  3. Step 3

    0.6230=Y×248.30248.31  ⟹  Y=0.6230×248.31248.30=0.62300.6230 = \frac{Y \times 248.30}{248.31} \implies Y = \frac{0.6230 \times 248.31}{248.30} = 0.6230

    Correct

    0.6230=Y×248.30266.33  ⟹  Y=0.6230×266.33248.30≈0.66860.6230 = \frac{Y \times 248.30}{266.33} \implies Y = \frac{0.6230 \times 266.33}{248.30} \approx 0.6686

    You solved the algebraic equation accurately based on your denominator, but the result was affected by subtracting water in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the stoichiometric reactant masses and added them to find the total feed mass.

You correctly related the product mass to the fractional yield and product molar mass.

You isolated the variable YY using consistent algebraic steps.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misdefined Green Chemistry Metric Denominator

You treated by-product mass as a deduction from the input feed instead of counting the entire mass of starting materials introduced into the reactor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing mass balance of the product side with the definition of feed mass in Reaction Mass Efficiency (RME). In sustainability metrics, the denominator represents all raw materials fed into the process, so by-products are never subtracted from it.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define RME Denominator
  • RME=mtarget product∑mreactants fed\text{RME} = \frac{m_{\text{target product}}}{\sum m_{\text{reactants fed}}}

  • Always place the complete input mass of all starting materials in the denominator without subtracting any stoichiometric by-products.

Link RME, Yield, and Atom Economy
  • RME=Yield×Atom Economy\text{RME} = \text{Yield} \times \text{Atom Economy} (for equimolar neat feeds)

  • Check whether your calculated yield is higher than your RME\text{RME} whenever AE<100%\text{AE} < 100\%.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the true RME\text{RME} relation: RME=Y×MesterMacid+Malcohol\text{RME} = \frac{Y \times M_{\text{ester}}}{M_{\text{acid}} + M_{\text{alcohol}}}.

  2. Substitute the given numerical values: 0.6230=Y×248.30 g/mol266.33 g/mol0.6230 = \frac{Y \times 248.30\text{ g/mol}}{266.33\text{ g/mol}}.

  3. Solve for the fractional yield: Y=0.6230×266.33248.30=0.6686Y = \frac{0.6230 \times 266.33}{248.30} = 0.6686.

Final answer

Yield=66.86%\text{Yield} = 66.86\% (or 0.66860.6686)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the exact standard definitions of Atom Economy (theoretical) and Reaction Mass Efficiency (practical).

  • Practice identifying the input stream components versus output waste streams in reactor balance audits.

  • Solve the practice problems below to master back-calculating yield from sustainability metrics.

OverviewACEpath Teacher's Diagnosis

02 The student forgets that RME incorporates Atom Economy and inverts the ratio of product mass to reactant mass when solving for yield.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total reactant mass=180.20+86.13=266.33 g\text{Total reactant mass} = 180.20 + 86.13 = 266.33\text{ g}

  2. Step 2

    RME=Y×(total reactant mass/product mass)  ⟹  0.6230=Y×(266.33/248.30)\text{RME} = Y \times (\text{total reactant mass} / \text{product mass}) \implies 0.6230 = Y \times (266.33 / 248.30)

    Correct

    RME=Y×Mproduct∑Mreactants=Y×248.30266.33\text{RME} = Y \times \frac{M_{\text{product}}}{\sum M_{\text{reactants}}} = Y \times \frac{248.30}{266.33}

    You inverted the mass ratio. Reaction Mass Efficiency measures the fraction of input mass that ends up in the isolated product, meaning RME=Y×AE=Y×Mproduct∑Mreactants\text{RME} = Y \times \text{AE} = Y \times \frac{M_{\text{product}}}{\sum M_{\text{reactants}}}, putting the product mass in the numerator.

  3. Step 3

    Y=0.6230/(266.33/248.30)=0.5808Y = 0.6230 / (266.33 / 248.30) = 0.5808

    Correct

    Y=0.6230×266.33248.30≈0.6686(66.86%)Y = 0.6230 \times \frac{266.33}{248.30} \approx 0.6686\quad (66.86\%)

    Your algebraic solving technique was mathematically sound, but because it used the inverted ratio from the previous step, your final value was lower than the true yield.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the reaction was stoichiometric and found the sum of the reactant molar masses.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted green chemistry efficiency ratio

You accidentally placed the total reactant mass in the numerator instead of the denominator when setting up the relationship between RME and yield.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the efficiency ratio with its reciprocal. Efficiency metrics always represent 'useful output divided by total input,' so Atom Economy is Mdesired product∑Mreactants\frac{M_{\text{desired product}}}{\sum M_{\text{reactants}}}, making RME=Yield×AE\text{RME} = \text{Yield} \times \text{AE}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Efficiency Ratio Orientation
  • Metric=mass of useful producttotal mass of reactants fed≤1\text{Metric} = \frac{\text{mass of useful product}}{\text{total mass of reactants fed}} \le 1

  • Always verify that the target product mass appears in the numerator so that the ideal maximum metric never exceeds 100%100\%.

Linking RME and Yield
  • For a neat, equimolar reaction with no excess reagents, RME=Yield×AE\text{RME} = \text{Yield} \times \text{AE}.

  • Rearrange to solve for yield as Yield=RMEAE=RME×∑MreactantsMproduct\text{Yield} = \frac{\text{RME}}{\text{AE}} = \text{RME} \times \frac{\sum M_{\text{reactants}}}{M_{\text{product}}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the stoichiometric relationship: RME=Y×AE=Y×MesterMacid+Malcohol\text{RME} = Y \times \text{AE} = Y \times \frac{M_{\text{ester}}}{M_{\text{acid}} + M_{\text{alcohol}}}.

  2. Substitute the values: 0.6230=Y×248.30 g/mol266.33 g/mol0.6230 = Y \times \frac{248.30\text{ g/mol}}{266.33\text{ g/mol}}.

  3. Solve for the yield: Y=0.6230×266.33248.30≈0.6686Y = 0.6230 \times \frac{266.33}{248.30} \approx 0.6686.

Final answer

Yield=66.86%\text{Yield} = 66.86\% (or 0.66860.6686)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formal definition of Reaction Mass Efficiency (RME) as actual product mass divided by total reactant feed mass.

  • Practice checking dimensional consistency and ensuring theoretical Atom Economy is always less than or equal to 11 when defined as product over reactants.

  • Complete the follow-up practice exercises to reinforce back-calculating yield from sustainability audit metrics.

OverviewACEpath Teacher's Diagnosis

03 The student only considers the limiting reagent (carboxylic acid) in the denominator instead of the total mass of all reactants fed into the process.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    RME=mass of productmass of carboxylic acid\text{RME} = \frac{\text{mass of product}}{\text{mass of carboxylic acid}}

    Correct

    RME=mproductmacid+malcohol=Y⋅MesterMacid+Malcohol\text{RME} = \frac{m_{\text{product}}}{m_{\text{acid}} + m_{\text{alcohol}}} = \frac{Y \cdot M_{\text{ester}}}{M_{\text{acid}} + M_{\text{alcohol}}}

    You defined the denominator of RME\text{RME} using only the carboxylic acid instead of the sum of all reactants introduced into the process.

  2. Step 2

    0.6230=(Y×248.30)/180.20  ⟹  Y×248.30=0.6230×180.20=112.26460.6230 = (Y \times 248.30) / 180.20 \implies Y \times 248.30 = 0.6230 \times 180.20 = 112.2646

    Correct

    0.6230=Y×248.30180.20+86.13  ⟹  Y×248.30=0.6230×266.33=165.92360.6230 = \frac{Y \times 248.30}{180.20 + 86.13} \implies Y \times 248.30 = 0.6230 \times 266.33 = 165.9236

    You performed valid algebraic rearrangements, but the denominator carried over the missing reactant mass from Step 1.

  3. Step 3

    Y=112.2646248.30=0.4521Y = \frac{112.2646}{248.30} = 0.4521

    Correct

    Y=165.9236248.30≈0.6682 to 0.6686(66.86%)Y = \frac{165.9236}{248.30} \approx 0.6682\text{ to } 0.6686\quad (66.86\%)

    You evaluated the final quotient accurately based on your intermediate values, but the result was affected by the initial formula error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the isolated product mass in terms of the fractional yield and product molar mass.

You performed accurate step-by-step algebraic isolation and division to solve for the unknown yield.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted reactant mass from RME denominator

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated Reaction Mass Efficiency as a ratio relative to only one starting reagent rather than the total mass of all raw materials fed into the reaction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the RME denominator
  • Reaction Mass Efficiency measures green mass utilization: RME=misolated desired product∑mreactants fed\text{RME} = \frac{m_{\text{isolated desired product}}}{\sum m_{\text{reactants fed}}}.

  • Always sum the masses of all stoichiometric reactants and co-reactants introduced into the reactor.

Connect RME to Atom Economy
  • Under neat, equimolar stoichiometric conditions, RME=Yield×Atom Economy=Y×Mproduct∑Mreactants\text{RME} = \text{Yield} \times \text{Atom Economy} = Y \times \frac{M_{\text{product}}}{\sum M_{\text{reactants}}}.

  • Calculate the total reactant molar mass before isolating the yield.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Sum the molar masses of both reactants fed into the reactor: Mtotal reactants=180.20 g/mol+86.13 g/mol=266.33 g/molM_{\text{total reactants}} = 180.20\text{ g/mol} + 86.13\text{ g/mol} = 266.33\text{ g/mol}.

  2. Express the neat equimolar balance: RME=Y⋅MesterMtotal reactants\text{RME} = Y \cdot \frac{M_{\text{ester}}}{M_{\text{total reactants}}}.

  3. Substitute the given audit value: 0.6230=Y⋅248.30266.330.6230 = Y \cdot \frac{248.30}{266.33}.

  4. Solve for YY: Y=0.6230×266.33248.30=0.6686Y = 0.6230 \times \frac{266.33}{248.30} = 0.6686.

Final answer

Yield=66.86% (or 0.6686)\text{Yield} = 66.86\%\text{ (or }0.6686\text{)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formal definition of Reaction Mass Efficiency (RME) versus simple single-reactant percentage yields.

  • Practice checking whether every reactant appearing on the left side of a balanced stoichiometric equation is accounted for in the denominator.

  • Verify limiting vs. stoichiometric feed conditions to ensure all mass entering the reactor vessel is summed.

Lock it in

Similar question

01

An amide is formed neat from an acyl chloride (140.5 g/mol140.5\text{ g/mol}) and an amine (73.1 g/mol73.1\text{ g/mol}) in a 1:11:1 stoichiometric ratio. The target amide has a molar mass of 177.2 g/mol177.2\text{ g/mol}, and the reaction achieved an RME\text{RME} of 58.0%58.0\%. Calculate the fractional reaction yield.

Answer

69.9%69.9\% (or 0.6990.699). Key steps: Total reactant mass =140.5+73.1=213.6 g/mol= 140.5 + 73.1 = 213.6\text{ g/mol}. AE=177.2/213.6=0.8296\text{AE} = 177.2 / 213.6 = 0.8296. Yield=RME/AE=0.580/0.8296≈0.699\text{Yield} = \text{RME} / \text{AE} = 0.580 / 0.8296 \approx 0.699.

02

A solvent-free condensation reaction produces a fragrance molecule (M=150.0 g/molM = 150.0\text{ g/mol}) along with one mole of methanol (M=32.0 g/molM = 32.0\text{ g/mol}) from two equimolar precursors. If the process runs with a 75.0%75.0\% conversion yield, calculate the Atom Economy (AE) and the resulting Reaction Mass Efficiency (RME).

Answer

AE=82.4%\text{AE} = 82.4\%, RME=61.8%\text{RME} = 61.8\%. Key steps: Total reactant molar mass =150.0+32.0=182.0 g/mol= 150.0 + 32.0 = 182.0\text{ g/mol}. AE=150.0/182.0=0.8242\text{AE} = 150.0 / 182.0 = 0.8242 (82.4%82.4\%). RME=Yield×AE=0.750×0.8242=0.6181\text{RME} = \text{Yield} \times \text{AE} = 0.750 \times 0.8242 = 0.6181 (61.8%61.8\%).

03

In a pilot batch synthesis, a chemist feeds 100.0 g100.0\text{ g} of reagent A and 50.0 g50.0\text{ g} of reagent B (no solvents). The reaction yields 90.0 g90.0\text{ g} of desired product. If the theoretical maximum yield of product from these initial feed quantities is 120.0 g120.0\text{ g}, find both the conventional percentage yield and the Reaction Mass Efficiency (RME).

Answer

Yield=75.0%\text{Yield} = 75.0\%, RME=60.0%\text{RME} = 60.0\%. Key steps: Yield=(90.0 g/120.0 g)×100%=75.0%\text{Yield} = (90.0\text{ g} / 120.0\text{ g}) \times 100\% = 75.0\%. Total feed mass =100.0+50.0=150.0 g= 100.0 + 50.0 = 150.0\text{ g}. RME=(90.0 g/150.0 g)×100%=60.0%\text{RME} = (90.0\text{ g} / 150.0\text{ g}) \times 100\% = 60.0\%.

Loading workspace…