Resources

In a continuous-flow microreactor, an alkylation reaction is performed under near-solventless conditions where the mass of solvent used per run approaches zero (msolvent→0 gm_{\text{solvent}} \rightarrow 0\text{ g}). The reaction involves reactant A (molar mass 100.0 g/mol100.0\text{ g/mol}) and reactant B (molar mass 50.0 g/mol50.0\text{ g/mol}) reacting in a 1:11:1 stoichiometric molar ratio to give product P (molar mass 130.0 g/mol130.0\text{ g/mol}) and byproduct W (molar mass 20.0 g/mol20.0\text{ g/mol}). If the chemical yield approaches 100%100\% (Y→1.00Y \rightarrow 1.00) and no excess reactants are added, calculate the asymptotic limit of (a) the Environmental Factor (EE-factor) and (b) the Reaction Mass Efficiency (RME) as the reaction achieves this ideal boundary.

Answer and steps

Final answer

(a) lim⁡E-factor=0.154 kg waste/kg product\lim E\text{-factor} = 0.154\text{ kg waste/kg product}; (b) lim⁡RME=86.7%\lim \text{RME} = 86.7\%

Steps

01

Write the Stoichiometric Mass Balance

To find the theoretical limits of the EE-factor and Reaction Mass Efficiency (RME\text{RME}), we consider the ideal conditions where the chemical reaction proceeds to completion with no excess reagents and no process solvent.

The reaction equation is: A+B→P+W\ce{A + B -> P + W}

Using a basis of 1.00 mol1.00\text{ mol} of each reactant:

  • Mass of reactant A\ce{A}: mA=1.00 mol×100.0 g/mol=100.0 gm_{\ce{A}} = 1.00\text{ mol} \times 100.0\text{ g/mol} = 100.0\text{ g}
  • Mass of reactant B\ce{B}: mB=1.00 mol×50.0 g/mol=50.0 gm_{\ce{B}} = 1.00\text{ mol} \times 50.0\text{ g/mol} = 50.0\text{ g}
  • Total mass of reactants: mreactants, total=100.0 g+50.0 g=150.0 gm_{\text{reactants, total}} = 100.0\text{ g} + 50.0\text{ g} = 150.0\text{ g}

At 100%100\% yield (Y→1.00Y \rightarrow 1.00):

  • Mass of desired product P\ce{P}: mP=1.00 mol×130.0 g/mol=130.0 gm_{\ce{P}} = 1.00\text{ mol} \times 130.0\text{ g/mol} = 130.0\text{ g}
  • Mass of stoichiometric byproduct W\ce{W}: mW=1.00 mol×20.0 g/mol=20.0 gm_{\ce{W}} = 1.00\text{ mol} \times 20.0\text{ g/mol} = 20.0\text{ g}

02

Calculate the Asymptotic Limit of the EE-factor

The Environmental Factor (EE-factor) is defined as the ratio of the total mass of waste generated to the mass of final product: E-factor=mwastemproductE\text{-factor} = \frac{m_{\text{waste}}}{m_{\text{product}}}

Under ideal continuous-flow conditions:

  • Solvent mass approaches zero (msolvent→0 gm_{\text{solvent}} \rightarrow 0\text{ g}).
  • There are no unreacted starting materials because reactants are fed in an exact 1:11:1 stoichiometric ratio with 100%100\% conversion.
  • Therefore, the only waste generated is the stoichiometric byproduct W\ce{W}: mwaste=mW=20.0 gm_{\text{waste}} = m_{\ce{W}} = 20.0\text{ g}

Calculating the limiting EE-factor: lim⁡E-factor=mWmP=20.0 g130.0 g≈0.1538 kg waste/kg product\lim E\text{-factor} = \frac{m_{\ce{W}}}{m_{\ce{P}}} = \frac{20.0\text{ g}}{130.0\text{ g}} \approx 0.1538\text{ kg waste/kg product}

Rounded to three significant figures: lim⁡E-factor=0.154 kg waste/kg product\lim E\text{-factor} = 0.154\text{ kg waste/kg product}

(Common Pitfall: Do not include the total reactant mass in the numerator; the EE-factor strictly counts waste, not total inputs.)


03

Calculate the Asymptotic Limit of the Reaction Mass Efficiency (RME\text{RME})

Reaction Mass Efficiency (RME\text{RME}) measures the percentage of reactant mass that ends up in the desired product: RME=mproduct∑mreactants×100%\text{RME} = \frac{m_{\text{product}}}{\sum m_{\text{reactants}}} \times 100\%

Under stoichiometric conditions with 100%100\% yield, the theoretical limit of RME\text{RME} equals the Atom Economy (AE\text{AE}) of the reaction: lim⁡RME=mPmA+mB×100%=130.0 g100.0 g+50.0 g×100%\lim \text{RME} = \frac{m_{\ce{P}}}{m_{\ce{A}} + m_{\ce{B}}} \times 100\% = \frac{130.0\text{ g}}{100.0\text{ g} + 50.0\text{ g}} \times 100\%

lim⁡RME=130.0 g150.0 g×100%≈86.67%\lim \text{RME} = \frac{130.0\text{ g}}{150.0\text{ g}} \times 100\% \approx 86.67\%

Rounded to three significant figures: lim⁡RME=86.7%\lim \text{RME} = 86.7\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the E-factor as total waste divided by total reactants rather than divided by the mass of the desired product.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mass of waste=20.0 g  ⟹  total mass of reactants=150.0 g\text{mass of waste} = 20.0\text{ g} \implies \text{total mass of reactants} = 150.0\text{ g}

  2. Step 2

    E-factor=20.0150.0≈0.133E\text{-factor} = \frac{20.0}{150.0} \approx 0.133

    Correct

    lim⁡E-factor=mwastemproduct=20.0 g130.0 g≈0.154\lim E\text{-factor} = \frac{m_{\text{waste}}}{m_{\text{product}}} = \frac{20.0\text{ g}}{130.0\text{ g}} \approx 0.154

    You divided the mass of waste by the total reactant mass (150.0 g150.0\text{ g}) rather than by the mass of the desired product (130.0 g130.0\text{ g}). The EE-factor is defined strictly as mass of waste divided by mass of desired product.

  3. Step 3

    mass of product=130.0 g  ⟹  RME=130.0150.0≈0.867\text{mass of product} = 130.0\text{ g} \implies \text{RME} = \frac{130.0}{150.0} \approx 0.867

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the mass of waste produced as 20.0 g20.0\text{ g}.

You correctly calculated the mass of product as 130.0 g130.0\text{ g} and total reactants as 150.0 g150.0\text{ g}.

You correctly calculated the Reaction Mass Efficiency (RME) as 86.7%86.7\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Denominator in Green Chemistry Metric

You accidentally placed total reactant mass in the denominator of the EE-factor formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the basis of the EE-factor with total input or mass efficiency metrics: EE-factor measures waste generated per unit mass of final desired product (mwaste/mproductm_{\text{waste}} / m_{\text{product}}), whereas mass fraction or RME metrics relate back to total inputs.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the $E$-factor Denominator
  • E-factor=∑mwastemdesired productE\text{-factor} = \frac{\sum m_{\text{waste}}}{m_{\text{desired product}}}

  • Always verify that the denominator is the mass of the isolated target product, not the total input or total reactants.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the target product mass: mproduct=130.0 gm_{\text{product}} = 130.0\text{ g}.

  2. Identify the total waste mass: mwaste=20.0 gm_{\text{waste}} = 20.0\text{ g}.

  3. Evaluate the quotient: lim⁡E-factor=20.0 g130.0 g≈0.1538 kg waste/kg product\lim E\text{-factor} = \frac{20.0\text{ g}}{130.0\text{ g}} \approx 0.1538\text{ kg waste/kg product}.

Final answer

(a) lim⁡E-factor=0.154 kg waste/kg product\lim E\text{-factor} = 0.154\text{ kg waste/kg product}; (b) lim⁡RME=86.7%\lim \text{RME} = 86.7\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check green chemistry metric formulas before calculating: remember that EE-factor evaluates waste relative to the desired product.

  • Practice converting between Atom Economy, RME, and theoretical minimum EE-factor using the relation Etheory=100%−AEAEE_{\text{theory}} = \frac{100\% - \text{AE}}{\text{AE}}.

OverviewACEpath Teacher's Diagnosis

02 The student confuses Reaction Mass Efficiency with Atom Economy based on desired product over byproduct, calculating product mass divided by waste mass instead of reactant mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mass of waste=20.0 g  ⟹  mass of product=130.0 g  ⟹  E-factor=20.0/130.0≈0.154\text{mass of waste} = 20.0\text{ g} \implies \text{mass of product} = 130.0\text{ g} \implies E\text{-factor} = 20.0 / 130.0 \approx 0.154

  2. Step 2

    mass of product=130.0 g  ⟹  mass of waste=20.0 g  ⟹  RME=130.0/20.0=6.50\text{mass of product} = 130.0\text{ g} \implies \text{mass of waste} = 20.0\text{ g} \implies \text{RME} = 130.0 / 20.0 = 6.50

    Correct

    lim⁡RME=mproduct∑mreactants×100%=130.0 g100.0 g+50.0 g×100%≈86.7%\lim \text{RME} = \frac{m_{\text{product}}}{\sum m_{\text{reactants}}} \times 100\% = \frac{130.0\text{ g}}{100.0\text{ g} + 50.0\text{ g}} \times 100\% \approx 86.7\%

    You divided the product mass by the waste mass rather than the total mass of all reactants fed into the reaction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the masses of the desired product and stoichiometric waste for a 1.00 mol1.00\text{ mol} reaction basis.

You applied the exact definition of the Environmental Factor (EE-factor) as waste divided by desired product.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
RME Denominator Confusion

Dividing product mass by waste mass instead of total reactant mass.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated Reaction Mass Efficiency as the ratio of product to waste (the inverse of the EE-factor) rather than the percentage of input reactant mass incorporated into the target product.

REASONING PATH
Your ACEpath teacher’s suggested approach
RME Definition
  • RME=mass of desired producttotal mass of reactants×100%\text{RME} = \frac{\text{mass of desired product}}{\text{total mass of reactants}} \times 100\%

  • Always place the sum of all reactant inputs in the denominator of RME, not the byproduct or waste mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the total reactant mass: mtotal, reactants=mA+mB=100.0 g+50.0 g=150.0 gm_{\text{total, reactants}} = m_{\ce{A}} + m_{\ce{B}} = 100.0\text{ g} + 50.0\text{ g} = 150.0\text{ g}.

  2. Calculate RME by dividing product mass by total reactant mass: RME=130.0 g150.0 g×100%≈86.67%\text{RME} = \frac{130.0\text{ g}}{150.0\text{ g}} \times 100\% \approx 86.67\%.

Final answer

(a) lim⁡E-factor=0.154 kg waste/kg product\lim E\text{-factor} = 0.154\text{ kg waste/kg product}; (b) lim⁡RME=86.7%\lim \text{RME} = 86.7\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental difference between waste-to-product metrics (EE-factor) and input-efficiency metrics (RME and Atom Economy).

  • Practice computing RME alongside EE-factor on multi-reactant reactions to reinforce the distinct denominators.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly includes the product mass in the numerator when calculating the E-factor by equating waste to total mass of products generated.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mass of products=130.0 g+20.0 g=150.0 g  ⟹  mass of product=130.0 g  ⟹  E-factor=150.0130.0≈1.15\text{mass of products} = 130.0\text{ g} + 20.0\text{ g} = 150.0\text{ g} \implies \text{mass of product} = 130.0\text{ g} \implies E\text{-factor} = \frac{150.0}{130.0} \approx 1.15

    Correct

    lim⁡E-factor=mwastemproduct=20.0 g130.0 g≈0.154 kg waste/kg product\lim E\text{-factor} = \frac{m_{\text{waste}}}{m_{\text{product}}} = \frac{20.0\text{ g}}{130.0\text{ g}} \approx 0.154\text{ kg waste/kg product}

    The Environmental Factor is defined as mwastemproduct\frac{m_{\text{waste}}}{m_{\text{product}}}. Waste consists only of undesired byproducts, lost reagents, and solvents. The desired product (130.0 g130.0\text{ g}) is not waste, so only byproduct W (20.0 g20.0\text{ g}) belongs in the numerator.

  2. Step 2

    RME=130.0(100.0+50.0)=130.0150.0≈0.867\text{RME} = \frac{130.0}{(100.0 + 50.0)} = \frac{130.0}{150.0} \approx 0.867

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the stoichiometric product masses from the molar masses.

You calculated the Reaction Mass Efficiency accurately using the ratio of target product to total reactant mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Waste Definition Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated total product mass (or total system mass output) with waste mass when evaluating the EE-factor numerator. The desired target molecule must never be counted as waste.

REASONING PATH
Your ACEpath teacher’s suggested approach
Defining Waste in Green Chemistry
  • Total Waste=∑mreactants+msolvents+madditives−mdesired product\text{Total Waste} = \sum m_{\text{reactants}} + m_{\text{solvents}} + m_{\text{additives}} - m_{\text{desired product}}

  • Always subtract the mass of the desired product from the total mass entering or exiting the process when identifying mwastem_{\text{waste}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify waste stream: under 100%100\% yield and zero solvent, the only waste is the byproduct W\ce{W}, so mwaste=20.0 gm_{\text{waste}} = 20.0\text{ g}.

  2. Apply the EE-factor formula: E-factor=mwastemproduct=20.0 g130.0 g≈0.154E\text{-factor} = \frac{m_{\text{waste}}}{m_{\text{product}}} = \frac{20.0\text{ g}}{130.0\text{ g}} \approx 0.154.

Final answer

(a) lim⁡E-factor=0.154 kg waste/kg product\lim E\text{-factor} = 0.154\text{ kg waste/kg product}; (b) lim⁡RME=86.7%\lim \text{RME} = 86.7\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the numerator of an EE-factor expression contains strictly unwanted outputs or auxiliary materials, never the desired product itself.

  • Practice using the identity Ideal E-factor=1Atom Economy−1=100%RME−1\text{Ideal } E\text{-factor} = \frac{1}{\text{Atom Economy}} - 1 = \frac{100\%}{\text{RME}} - 1 to cross-check ideal solventless calculations.

Lock it in

Similar question

01

A condensation reaction produces 180.0 g180.0\text{ g} of desired product along with 18.0 g18.0\text{ g} of water as the sole byproduct, running with 100%100\% yield and stoichiometric amounts of reactants without solvent. Calculate the theoretical EE-factor.

Answer

E-factor=mwastemproduct=18.0 g180.0 g=0.100 kg waste/kg productE\text{-factor} = \frac{m_{\text{waste}}}{m_{\text{product}}} = \frac{18.0\text{ g}}{180.0\text{ g}} = 0.100\text{ kg waste/kg product}.

02

An esterification reaction uses 60.0 g60.0\text{ g} of acetic acid and 46.0 g46.0\text{ g} of ethanol to yield 70.4 g70.4\text{ g} of ethyl acetate (M=88.0 g/molM = 88.0\text{ g/mol}) and 14.4 g14.4\text{ g} of water, leaving 21.2 g21.2\text{ g} of unreacted starting materials. Solvents are completely recycled. Calculate: (a) the EE-factor, and (b) the RME of this reaction.

Answer

Total reactants =60.0+46.0=106.0 g= 60.0 + 46.0 = 106.0\text{ g}. Waste =14.4 g (water)+21.2 g (unreacted)=35.6 g= 14.4\text{ g (water)} + 21.2\text{ g (unreacted)} = 35.6\text{ g}. (a) E-factor=35.6 g70.4 g≈0.506 kg waste/kg productE\text{-factor} = \frac{35.6\text{ g}}{70.4\text{ g}} \approx 0.506\text{ kg waste/kg product}. (b) RME=70.4 g106.0 g×100%≈66.4%\text{RME} = \frac{70.4\text{ g}}{106.0\text{ g}} \times 100\% \approx 66.4\%.

03

A stoichiometric reaction has an Atom Economy (AE) of 80.0%80.0\%. Assuming complete conversion, 100%100\% yield, and no solvent or processing waste, derive the theoretical limiting EE-factor expressed directly in terms of AE, and find its value.

Answer

Since AE=mproductmreactants\text{AE} = \frac{m_{\text{product}}}{m_{\text{reactants}}} and mwaste=mreactants−mproductm_{\text{waste}} = m_{\text{reactants}} - m_{\text{product}}, we have: lim⁡E-factor=mwastemproduct=1−AEAE=1−0.8000.800=0.250 kg waste/kg product\lim E\text{-factor} = \frac{m_{\text{waste}}}{m_{\text{product}}} = \frac{1 - \text{AE}}{\text{AE}} = \frac{1 - 0.800}{0.800} = 0.250\text{ kg waste/kg product}.

Loading workspace…